16. WELDING EQUIPMENT

INVERTER 140 A
Tecnica 164
TEL164
• single-phase, small and lightweight inverter for electrode welding
• efficiency and control accuracy assure excellent result in welding
with all kinds of electrodes
• light and easy to move due to inverter techonology
• fan-cooled
• high welding current stability in spite of mains voltage fluctuation
• thermostatic, overvoltage, undervoltage and overcurrent
protections
• anti-stick device
• hot start -starting current
• the set includes carrying case, ground cable, electrode cable, slag
hammer and hand shield
Mains voltage
Fuse
Current range
Current at
60 10 %
230 V
16 A
5-150 A
70 A
140 A
Max. no load voltage
76 V
Absorbed power
1,6 kW / 60 %, 4,6 kW/max
Efficiency 0,82
Electrodes
Ø 1,6 - 3,2 mm
Protection class IP 23
Norms EN 60974-1, EN 60974-10
Dimensions
L310, W120, H225 mm
Weight
3,4 kg
Packing size 1
EAN 8004897633671
Welding
aggregate
on part
35
INVERTER 160 A
Techonology 175
TEL175
• single-phase, small and lightweight inverter for electrode welding
and Tig electrode welding with scratch striking
• flexibility of use with a wide range of electrodes: rutile, basic and
stainless steel
• light and easy to move due to inverter techonology
• fan-cooled
• high welding current stability in spite of mains voltage fluctuation
• thermostatic, overvoltage, undervoltage and overcurrent
protections
• anti-stick device
• hot start -starting current
Mains voltage
230 V
Fuse
16 A
Current range
5-160 A
Current at
60 125 35 %
165 A
Max. no load voltage
85 V
Absorbed power
3,7 kW/60 %, 5 KW/max.
Efficiency 0,85
Electrodes
Ø 1,6 - 4,0 mm
Protection class IP 23
Norms EN 60974-1, EN 60974-10
Dimensions
L385, W150, H265 mm
Weight
6,1 kg
Packing size 1
EAN 8004897633138
WELDING KIT
TELV801000
• includes ground cable 2 m, electrode cable 3 m, slag hammer and
hand shield (couplings not included)
MOTOINVERTER 130 A
Motoinverter 154
TEL154
• inverter technology, motor-driven welding machine with high
frequency permanent magnets alternator for MMA and TIC-DC
welding
• consists of spark ignition engine, which launches high frequencyalternating
voltage/ permanent magnet generator
• selector switch for direct current (DC) - can be used as a direct
current
• generator for powering electrical tools such as drills and sanders
• 4-stroke petrol engine with recoil starter and automatic shutdown
for lack of oil
• over-fast engine safeguard/ high welding current safequard
• overheating safequard – automatic return
• quick-connect fitting (positive and negative) for connecting
welding cable
• continuous welding current adjustment
• anti-stick device
• motor: Honda GX200
- 4,8 kW / 6,5 Hv
- 196 cm 3
- 3600 rpm
- manual starting
- tank capacity 3,6 l
- fuel consumption 313 g/kWh
- 99 dB
• protection class IP 23
• dimensions: L750, W370, H430 mm
• weight 40 kg
• packing size: 1
EAN 8004897644936
16/15
Max. no voltage 112 V
Current range 5-130 A
Current at
100 70 60 90 A
30 % 130 A
Absorbed power 1,8 kW
Electrodes
Ø 1,6–3,2 mm
NOTE!
Check the
oil before
the first
start!
WELDING KIT
TELV801000
• includes ground cable 2 m, electrode cable 3 m, slag hammer and
hand shield (couplings not included)