16. WELDING EQUIPMENT

MIG/MAG-WELDING MACHINES
COMPACT 4-roll wire drive
Order no.
MIG 305 C-L-4 UPS
M79070321
• high-quality compact machine,
which is designed for industrial production
when welding thin and medium thick steels,
stainless steels and aluminium
with all kinds of shielding gases
MIG 385 C-L-4
M79070322
• high-quality compact machine,
which is designed for industrial production
when welding medium thick and thick steels,
stainless steels and aluminium
with all kinds of shielding gases
• 4-roll wire drive
• 4-roll wire drive
Mains voltage 400 V 400 V
Fuse 16 A 16 A
Cooling gas gas
Efficiency 0,85 0,77
Power ratio 0,97 0,95
Consumption 10,8 kW
Current range 40 - 300 A /16 - 29 V 40 - 385 A / 16 - 28,8 V
Voltage steps 20 24
Duty cycle
35 285 335 60 %
215 300 100 %
170 A
240 A
Open circuit voltage min. 17,4 - 19,2 V, max. 41,6 - 45,4 V
Wire Ø 0,8 - 1,2 mm (0,8 standard) 1,8 - 1,6 mm (1,0 standard)
Wire reel dimensions 5 - 15 kg / max. 300 mm 5 - 15 kg / max. 300 mm
Wire speed 1 - 15 m/min 1,3 - 18 m/min
Mode switch 2/4 point
Creeper start
0 - 4 m/min
Post current 0,05 - 0,5 sec. 0,05 - 0,5 sec.
Pre-weld gas flow 0,2 sek. 0,2 sec.
Post-weld gas flow
0 - 10 sec.
Spot- and cycle welding timer
0,1 - 3 sec.
Inductance tappings 1 2
Protection class IP 21 IP 21
Torch cable ML250, 4 m ML300, 4 m
Feed roll 0,8 (white) 1,0 (blue)
Standards EN 60974-1, EN 50199 EN 60974-1, EN 50199
Dimensions L900, W440, H710 mm L940, W510, H810 mm
Weight 104 kg 135 kg
EAN 6418914623248 6418914623262
16/7