Maxi Cosi Priori - Go Go Babyz

Here are some helpful Hints for attaching the
QR Kidz Travelmate to your Maxi Cosi Priori
car seat
It is important to note that the position and
length of the QR Kidz Strap is adjustable. To
adjust the strap position or length, simply
unscrew the binding posts, reposition or
lengthen the strap and then re insert and
screw the binding posts back together.
Once you have your optimal set up you will
not need to alter it for your car seat.
1) Start By laying your car seat face
down on the floor. Now lay the
Travelmate down onto the seat
positioning the support tabs
underneath the bottom of the base as
shown. The Travelmate should be
centered on the car seat with the
handle near the top of the car seat.
2) Feed the pre-attached ladder strap
through the space in the back of the car
seat where the car seat belt is normally
fed.

3) Next, insert the ladder strap into the
ratchet buckle. To tighten simply use
the ratchet buckle to feed the ladder
strap through until secure.
4) Your QR Kidz Travelmate is now
ready for use.