CSI 4500 Machinery HealthTM Monitor

Machinery Health TM Management
CSI 4500M Machinery Health Monitor Power Supply Card
Specifications PN A4532AC
B4532AC Specifications
Input Power
120 – 240 VAC 50/60 Hz
System Power Dissipation
< 25 watts for 32 signals, 16 tachometers,
16 relays
< 55 watts with optional fan tray and aux
power fully loaded
< 80 watts with optional transient processor
Optional Accessory Output Power -24 vdc @ 0.6 A for displacement probes
Supplies Power to the Rack
Supplies Power to
Auxiliary Equipment
5 vdc, 12 vdc, 24 vdc, 3.3 vdc, -12 vdc
+24 vdc, 0.3 A output for optional fan tray
±24 vdc, 0.6 A auxiliary output for displacement
transducers or other
CSI 4500M Machinery Health Monitor Fan Tray
Specifications PN B4500FT
B4500FT Specifications
The fan tray is intended to be used where ambient air temperature around the
stainless steel enclosure of the CSI 4500 rack is between 110°F and 120°F.
When ordered with a new CSI 4500 Monitor, the fan tray will be delivered
installed
Power to the fan tray is provided by a fan tray power auxiliary output from
the front panel of the Power Supply card of the CSI 4500 Monitor.
NOTE: In conditions above 120°F ambient, active cooling or conditioned
plant air should be installed.
NOTE: Fan tray required with the CSI 4500T. The CSI 4500T is the CSI
4500M with the transient option. The CSI 4500T should be installed in a control
room / computer room environment not to exceed 86F or 30C
Page 13