ACCUPLUS PRECISION METAL - Alchemyweb.ca

1994
ACCUPLUS PRECISION METAL
FABRICATORS INC.
7000 Davand Drive,
Mississauga, Ontario
ACCURPRESS 130 TON X 12’ CNC HYD. PRESS BRAKE
1994
Auction:
Tuesday,
April 19 th
@ 10:30 AM
Inspection:
Monday April 18 th
@ 9:00 AM – 4:00 PM
STRIPPIT FC-1000-XP-II CNC TURRET PUNCH
AUCTIONEERS
APPRAISERS • FINANCIERS
...and a lot more!
63 Maplecrete Road, Concord, Ontario L4K 1A5 Canada
Tel: (905) 669-8893 • Fax: (905) 669-7512

ACCURPRESS 130 TON X 12’ CNC HYD. PRESS BRAKE
HIROSS ESS-DXB071 AIR DRYER
1998
1998
PROMECAN
38 TON X 79”
CNC HYD-PRESS BRAKE
1993
1994
AMADA BR-610W DEBURRING MACHINE
KINGSLAND 40XM HYD.
IRONWORKER
ACCURPRESS
80 TON X 10’
HYD. PRESS BRAKE
FABRICATORS
’94 STRIPPIT model FC-1000-XP-II CNC turret
punch, s/n 094032995, 22 ton capacity, 50” x
40” sheet size, 20 station bi-directional turret, 4
auto indexing stations. (See photo on front cover)
’93 STRIPPIT model SPM-750R CNC turret
punch, s/n 040690013, 22 ton capacity, 40” x
30” sheet size, 19 station bi-directional turret.
’84 STRIPPIT model SUPER 30/30 single station
punch, s/n 2040103184, 30 ton capacity, 48” x
72” table, (2) tool holders, duplicator.
WALES STRIPPIT model #15 single station
punch, s/n 60791-255, 25 ton capacity, 1.5” tool
holder, 15” throat.
STRIPPIT punch & die grinder, s/n 85010-000.
ALSO: Large quantity & variety of punch & die
tooling
PRESS BRAKES
’94 ACCURPRESS model 713012 CNC hydraulic
press brake, s/n 2708 w/ COMP-U-BEND 2 axis
CNC controls, 130 ton x 12’ capacity.
PACIFIC model J90-8 CNC hydraulic press
brake, s/n 8077, AUTO-BEND 7, 2 axis CNC controls
90 ton x 8’ capacity.
’79 ACCURPRESS model 78010 hydraulic press
brake, s/n 145, w/DYNABEND 3 back gauge, 80
ton x 10’ capacity.
PROMECAM model RG-35-20 hydraulic press
brake, s/n 323520800, w/HURCO back gauge, 38
ton x 79” capacity.
CHICAGO model 135 press brake, s/n L-16918,
15 ton x 4’ capacity, variable speed drive.
DIACRO model 20-72 hydraulic press brake, s/n-
N/A, 12 ton x 6’ capacity.
ALSO: Good variety of full length & sectional
press brake tooling, corner notchers.
SHEAR
’86 ACCURSHEAR model 825010 hydraulic
squaring shear, s/n 521, 10’ x .250 “ capacity,
front operated motorized back gauge.
KEETONA 72” x 14ga. capacity, rear operated
manual back gauge, squaring & support arms.
SUPPORT MACHINERY
’98 AMADA model BR-610W wet type deburring
machine, s/n 61200071, 24” material width, 0-
16 FPM.
’98 HAEGER model 618-1H hydraulic insertion
press, s/n 06H00538, 6 ton capacity.
’93 KINGSLAND model 40XM hydraulic ironworker,
s/n 302293, 45 ton capacity, 3” x 3” x
5/16” angle.
GOTENEDS model RC-2 pyramid type sheet
bending rolls, s/n 2949M, 53” x 3.5” diameter
rolls, motorized.
BROWN BOGGS 36” slip rolls.
(2) BEE METAL model 20 belt sanders, 2” capacity.
APB model FAST-TAP flexible arm tapping
machine, s/n N/A.
FOOTBURT-HAMMOND model 632 pantograph
style drill press, s/n 1783.
NIDER model NI-70 geared head drill, s/n 71703,
50 to 900 spindle RPM.
’02 PRO-PEN model P3000 engraving machine,
s/n 03589.

2002
1993
KENT KGS-618 SURFACE GRINDER
STRIPPIT SUPER 30/30
SINGLE STATION PUNCH
1998
1984
ACCURSHEAR 825010 HYD. SQUARING SHEAR
VIEW OF FACTORY EQUIPMENT
HAEGER 618-1H HYD. INSERTION PRESS
STRIPPIT
SPM-750R CNC
TURRET PUNCH
1986
1998
QUINCY QMA50ACA41J ROTARY AIR COMPRESSOR
WELDING DEPT.
RAINBOW model ZDN-25C gun type spot welder,
s/n-N/A, 25 KVA, ASPA programmable controls,
balancer.
NATIONAL model 50RA24F050 rocker arm type
spot welder s/n X3991, 50 KVA, 24” throat,
ROBOTRON Series 30 controls.
THERMAL DYNAMICS model PAK-10SR plasma
cutting machine, s/n T71518A18351A, 100 AMP.
(3) MILLER model SYNCROWAVE 250 DX AC/DC
tig welders, 200 AMP @60% duty cycle, s/n
LB056271, LC272793, KD458020.
HOBART model CYBERSHOP AC/DC mig/tig
welder, 300 AMP @ 50% duty cycle, wire feed,
s/n KK296069.
MEMCO model S-250 AC/DC tig welder, 200
AMP @ 60% duty cycle, s/n KC327190.
HOBART model RC-300 DC arc welder
w/HOBART wire feed, 300 AMP @ 100% duty
cycle, s/n 80W503886.
(2) MILLER model CP-200 DC arc welders, s/n
built in wire feeds, 200 AMP @ 100% duty cycle,
s/n CR108555, CR108556.
LINDE model VI-252 DC arc welder, w/COBRA-
MATIC wire feed, 250 AMP @ 100% duty cycle,
s/n B80C17743.
COMPARC model MM-302 DC arc welder, 300
AMP @ 100% duty cycle, COMPARC wire feed,
s/n A-235-004.
LINCOLN model INVERTEC V160-T pulse type tig
welder, 160 AMP
THERMAL DYNAMICS model THERMAL ARC 300
GTSW pulse type tig welder, 300 AMP.
’98 HBS model KES1600 stud welder, s/n
9811155
ALSO: (5) steel welding tables, (25) welding
curtains, welding wire & rod, clamping tools, etc.
MACHINE SHOP
’02 KENT model KGS-618 hand feed surface
grinder, s/n KT20186, 6”x 18” magnetic chuck.
KENT model KGS-250H hydraulic surface
grinder, s/n 770419, 8” x 18” magnetic chuck.
BRIDGEPORT SERIES I ram type turret mill, s/n
379240383W, 9” x 42” table, R8 taper, variable
speed, 2 axis DRO.
EISELE model VMS II PV automatic cold saw, s/n
4531, 10” capacity. pneumatic clamping.
VERTICUT model 115 roll-in type vertical bandsaw,
s/n – n/a.
OSTER model 792 power threader, 2” capacity.
CRAFTSMAN 12” x 36” capacity tool room lathe.
FACTORY EQUIPMENT
TOYOTA model 42-6FGUC25 propane powered
forklift truck, s/n 75958, 4400 lbs., 198” lift, side
shift.
CLARK model C500-45 propane powered forklift
truck, s/n 355-988-2812-1174, 4500 lbs, 154” lift.
’98 QUINCY model QMA50ACA41J rotary screw
air compressor, s/n 74879, 50 HP receiving tank
& in-line filter.
’98 HIROSS model ESS-DXB071 refrigerated air
dryer, s/n 1432350003.
BEKO model OWAMAT 6 oil/water seperator.
ALSO: dumping hoppers, hydraulic pallet trucks,
factory trucks, 1/2 door wire mesh baskets,
metal tote bins, HD steel storage racks, adjustable
pallet racking, strapping caddies & tools, high

VIEW OF MILLER MIG & TIG WELDERS
35’ X 28’ FREE STANDING MEZZANINE
VIEW OF OFFICE FURNITURE
RAINBOW ZDN-25C GUN TYPE SPOT WELDER
INFINITY
APPRAISAL
SERVICES
Behind each Infinity appraisal
stands over 3 decades of industrial
knowledge and expertise. Let our
CPPA certified appraisers conduct
your next appraisal. Call us in
complete confidence at
905-669-8893.
This brochure is
only a partial listing.
Please visit our
website at
www.infassets.com
for more detailed
listings and photos.
PROXY BIDDING
We will be happy to bid on your behalf if
you are unable to attend our auction.
Please call our office at 905-669-8893, or
visit our website www.infassets.com
to submit a proxy bid.
FACTORY EQUIPMENT
(con’t)
pressure washers, extension & step ladders,
shop fans, power tools, storage cabinets,
hardware, shelving, shop-vacuums, electrical
supplies, tool cabinets, lockers, time clock w/
card racks, conveyor, cement mixer, dock
plate.
RAW MATERIAL
APPROX 60,000 lbs. of stainless steel, aluminum,
satin coated, galvanized hot & cold
rolled, sheet, aluminum and cold rolled and
structural, pipe and square tubing.
FREE STANDING
MEZZANEEN
35’ x 28’ heavy duty bolt together construction,
w/ lighting, security cage, stairway, sliding doors.
OFFICE EQUIPMENT &
FURNITURE
SONY SVT-LC300 time lapse videocassette
recorder W/ DELTA duplex multiplexer & monitor,
PANASONIC FP-D250 photocopier, HP LASER-
JET 3015 fax/copy machine, COMPAC PROLIANT
1600 server w/ (8) personal computers, (6) laser
printers, desks, credenzas, shelving units, file
cabinets, chairs, reception area, boardroom
furniture, tables, etc.
This brochure is
meant merely as a guide.
Infinity Assets makes
no guarantee, expressed
or implied, as to the
accuracy of the
information in this
brochure. Buyers should
inspect the goods beforehand
to satisfy themselves.
TERMS OF SALE
Payment
All payments must be in Cash, Certified Funds, Visa, MasterCard or
Interact, Wire Transfers or Company Checks must be accompanied
with a bank letter guaranteeing irrevocable payment to Infinity
Asset Solutions Inc.
A 2% surcharge will apply on all payments made by credit card.
A 10% buyers premium will be added to all purchases.
A $500 refundable security deposit is required upon registration.
A 25% deposit is required at time of purchase, balance due by 2 pm,
Wednesday, April 20th, 2005. NO EXCEPTIONS.
All goods are sold “As Is, Where Is”. Complete listings of terms and
conditions will be made available onsite at the time of registration.
Terms & conditions are detailed on our website.
REMOVAL TIMES
No later than Wednesday, April 27th, 2005.
Hours: Monday – Friday between 8 am – 5 pm.
No items maybe removed during auction. NO EXCEPTIONS.
DIRECTIONS
South of Derry Road, west of Dixie Road, in Mississauga.
Member In Good Standing Of:
Printed in Canada