225 Traders Blvd., Mississauga, Ontario - Alchemyweb.ca

225 Traders Blvd., Mississauga, Ontario
1986
NAKAMURA-TOME
ST-5BL CNC
TURNING CENTER
Auction:
Tuesday, April 26 th
@ 10:30 AM
Inspection:
Monday, April 25 th
@ 9:00 AM – 4:00 PM
1994
CINCINNATI ARROW 750 CNC VERT. MACHINING CENTER
AUCTIONEERS
APPRAISERS • FINANCIERS
...and a lot more!
63 Maplecrete Road, Concord, Ontario L4K 1A5 Canada
Tel: (905) 669-8893 • Fax: (905) 669-7512

GRAZIANO SAG-14 GAP BED LATHE
HARDINGE HLV-H SECOND-OPERATION LATHE
VDF BOEHRINGER 48-D ENGINE LATHE
1981
HITACHI SEIKI
HITEC-TURN 20SII
CNC TURNING CENTER
1992
1998
MAXIMART 4VS-S RAM TYPE TURRET MILL
This brochure is only a
partial listing. Please visit
our website at
www.infassets.com
for more detailed listings
and photos.
CNC MACHINES
’86 NAKAMURA-TOME model ST-5BL CNC
turning center, s/n C41609, w/FANUC 10TE-F
2 axis CNC controls, 12” chuck, 28” swing,
60” centers, spindle speeds variable to 5000
RPM, 3.25” spindle bore, programmable
tailstock, incline chip conveyor, on the floor
programming, 220 volt w/transformer.
’92 HITACHI SEIKI model HITEC-TURN 20 SII
CNC turning center, s/n HTS-2735L, W/SEIKI
MULTI 2 axis CNC controls, 8” chuck, 12”
swing, 20” centers, spindle speeds variable to
5,000 RPM, 10 station turret, programmable
tailstock, incline chip conveyor, on the floor
programming, tool checker, 220 volt w/transformer.
(sold subject to vendor’s approval)
’94 CINCINNATI model ARROW 750 CNC
vertical machining center, s/n 7043-C00-94-
0007, 20.5” x 37.5” table, w/CINCINNATI
MILACRON 3 axis CNC controls, #40 spindle
taper, 21 tool ATC, spindle speeds variable to
4500 RPM, on the floor programming, 220
volt w/transformer.
LATHES
VDF BOEHRINGER model M-670 gap bed
engine lathe, s/n 1047-000-222, 28” swing,
38” in gap, 108” centers, 5” spindle bore, 5.6
to 1120 RPM, inch/metric threading, quick
change tool post.
VDF BOEHRINGER model 48-D engine lathe,
s/n 1925-0417-06, 18” swing, 72” centers,
15HP spindle motor, 11.2 to 2240 RPM, 3 &
4 jaw chucks, steady & follow rests, quick
change tool post, taper turning.
’81 HARDINGE model HLV-H second operation
lathe, s/n HLV-H-9301-T, 10” swing, 20”
centers, 125 to 3000 variable speed RPM,
threading, radius dresser, collets, quick
change tool post, 2 axis DRO.
HARDINGE 10’ bar feed, s/n HF-FR-6-2417.
GRAZIANO model SAG 14 gap bed engine
lathe, s/n 38457, 14” swing, 20” in gap, 60”
centers, 40 to 1100 RPM, inch/metric threading,
quick change tool post, 3 & 4 jaw
chucks, steady & follow rests.
STANKO model 1A616G gap bed engine
lathe, s/n 659, 16” swing, 26” in gap, 30”
centers, 28 to 1800 RPM, inch/metric
threading.
MILLS
’98 MAXIMART model 4VS-S ram type turret
mill, s/n 72363, 10” x 54” table, 5 HP spindle
motor, #40 spindle taper, 410 to 4300 variable
speed RPM, power feed table, 2 axis
DRO.
BRIDGEPORT SERIES II ram type turret mill,
s/n 38445, 11” x 58” table, R8 spindle taper,
spindle speeds variable to 4250 RPM, power
feed table.
FIRST model LCS 1-1/2 ram type turret mill,
s/n 9102797, 9” x 42” table, R8 spindle
taper, 68 to 2760 RPM, 2 axis DRO.
INDUMA model MPV ram type turret mill, s/n
5126, 9” x 42” table, R8 spindle taper, 80 to
2713 RPM, 2 axis DRO.

VDF BOEHRINGER M-670 GAP BED ENGINE LATHE
1998
MICHAELLIN
U2 LIP GRINDER
1995
HINO FB DIESEL 14’ STAKE TRUCK
VIEW OF INSPECTION TOOLING.
1986
NAKAMURA-
TOME
ST-5BL CNC
TURNING
CENTER
CINCINNATI model #4 horizontal mill, s/n
4A4PIK-19, 16” x 78” power feed table, 18 to
1300 RPM, vertical head, arbor supports.
GRINDERS
KENT model KGS-250 hydraulic surface
grinder, s/n 770416-2, 8”x 18” ECLIPSE
magnetic chuck.
RIBON model RUR-500 universal cyclindrical
grinder, s/n 0869, 10” x 20” capacity, internal
grinding spindle.
MATRIX model #3 thread grinding machine,
s/n 1070, 4” diameter capacity.
’98 MICHAELLIN model U2 lip grinder, s/n
100870.
SAWS
DOALL model V36 vertical bandsaw, s/n
36514882, 36” throat, blade welder &
grinder.
NELSON ATKINSON model N-A1200 defect
saw, s/n 12469.
DRILLS
BURGMASTER model 2B turret style drill, s/n
21274, 6 station turret, 80 to 2000 RPM.
WALKER TURNER 4 head drill press, 18” x
67” table.
FACTORY EQUIPMENT
’81 LINDE model H30D diesel powered forklift
truck, s/n 331-1100038-30/1981, 6,000
lbs capacity, 148” lift, cushion tires.
TOYOTA model 42-4FGC-25 propane powered
forklift truck, s/n 404FGC25-19565, 4850
lbs. capacity 169” lift, cushion tires.
TOYOTA model 42-3FGC20 propane powered
forklift truck, s/n 621477, 4000 lbs. capacity.
COMAIRCO 15 and 5 HP air compressors.
FENNER 4000 lbs. elect/hyd. scissor lift
table, 42” x 52” platform.
POWERFIST 100 ton elect/hyd shop press.
ALSO: (7) LISTA & BEACH tool cabinets &
mould maker’s benches, cantilever racking,
strapping caddy & tools, CM 1 ton elect.
chain hoist, flexible air hose, metal benches,
storage cabinets, time clock w/ card racks.
VEHICLE
’95 HINO model FB single axel
diesel stake truck, 4 cylinder
turbo, 5 speed transmission,
14’ deck.
PERISHABLE
INSPECTION
Offset boring heads, tool holders,
reamers, geometric die
heads, tapping heads, drill
chucks, fly cutters, machinist
vises, taps, drill bits, boring
bars, carbide inserts, spade
drills, clamping tools, live &
dead centers, end mills, parallels,
magnetic sine chucks, magnetic bases,
digital verniers, bore gauges, depth gauges,
dial gauges, digital height gauges, inside/outside
micrometers, angle blocks, etc.

OFFICE FURNITURE
Desks, work stations, credenzas, filing
cabinets, tables chairs, pool table shelving
units, etc.
VIEW OF DIESEL AND LPG FORKLIFT TRUCKS
VIEW OF OFFICE FURNITURE
INFINITY
APPRAISAL
SERVICES
Behind each Infinity appraisal
stands over 3 decades of industrial
knowledge and expertise. Let our
CPPA certified appraisers conduct
your next appraisal. Call us in
complete confidence at
905-669-8893.
VIEW OF PRECISION TOOLING.
This brochure is
only a partial listing.
Please visit our
website at
www.infassets.com
for more detailed
listings and photos.
ROLEX WRIST WATCH W/APPRAISAL CERTIFICATE
PROXY BIDDING
We will be happy to bid
on your behalf if you are
unable to attend our auction.
Please call our office at
905-669-8893, or visit our
website www.infassets.com
to submit a proxy bid.
This brochure is
meant merely as a guide.
Infinity Assets makes
no guarantee, expressed
or implied, as to the
accuracy of the
information in this
brochure. Buyers should
inspect the goods beforehand
to satisfy themselves.
TERMS OF SALE
Payment
All payments must be in Cash, Certified Funds, Visa, MasterCard or
Interact, Wire Transfers or Company Checks must be accompanied
with a bank letter guaranteeing irrevocable payment to Infinity
Asset Solutions Inc.
A 2% surcharge will apply on all payments made by credit card.
A 10% buyers premium will be added to all purchases.
A $500 refundable security deposit is required upon registration.
A 25% deposit is required at time of purchase, balance due by 2 pm,
Wednesday, April 27th, 2005. NO EXCEPTIONS.
All goods are sold “As Is, Where Is”. Complete listings of terms and
conditions will be made available onsite at the time of registration.
Terms & conditions are detailed on our website.
REMOVAL TIMES
No later than Friday, April 29th, 2005.
Hours: Monday – Friday between 8 am – 5 pm.
No items maybe removed during auction. NO EXCEPTIONS.
DIRECTIONS
3rd traffic light South of Hwy #401, East of Hurontario Road.
Member In Good Standing Of:
Printed in Canada