Draw Wire Sensor HX
- Measurement ranges up to 50.8 m - Distance measurement and Tachometer - Intrinsically safe model (UL, CSA certified) - Linearity up to ±0.1 % of full scale - Analog-, TTL- or speed output - 2 designs, depending on the full scale - Easy installation - Stainless steel wire - Working temperature max. -20°C...+95°C - Protection class IP68
- Measurement ranges up to 50.8 m
- Distance measurement and Tachometer
- Intrinsically safe model (UL, CSA certified)
- Linearity up to ±0.1 % of full scale
- Analog-, TTL- or speed output
- 2 designs, depending on the full scale
- Easy installation
- Stainless steel wire
- Working temperature max. -20°C...+95°C
- Protection class IP68
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
- 10 -<br />
ORDER CODE <strong>HX</strong>-VP<br />
<strong>HX</strong>-VP- - - - - - - - -<br />
Output signal position<br />
Potentiometer<br />
Analog output 4...20 mA<br />
Analog output 0...10 VDC<br />
Analog output ±10 VDC<br />
A<br />
420<br />
510<br />
1010<br />
-<br />
L3M<br />
L4M<br />
L5M<br />
L6M<br />
L7M<br />
Type of output with IP65<br />
Standard: connector output, connector incl.<br />
Connector output +cable (3 m) with connector<br />
Connector output +cable (4 m) with connector<br />
Connector output +cable (5 m) with connector<br />
Connector output +cable (6 m) with connector<br />
Connector output +cable (7 m) with connector<br />
Measurement Range<br />
see table on page 2 bottom, 1. column<br />
<strong>Wire</strong> rope material<br />
Standard stainless steel<br />
Nylon jacketed up to 2.0 m range<br />
Nylon jacketed greater than 2.0 m range<br />
<strong>Wire</strong> rope tension<br />
-<br />
NJC<br />
NJC037<br />
L3M<br />
L4M<br />
L5M<br />
L6M<br />
L7M<br />
-<br />
R<br />
Type of output with IP68 (Options N6, SS)<br />
Cable output with fixed cable (3 m)<br />
Cable output with fixed cable (4 m)<br />
Cable output with fixed cable (5 m)<br />
Cable output with fixed cable (6 m)<br />
Cable output with fixed cable (7 m)<br />
Output signal<br />
Standard not reversed<br />
Reversed<br />
Standard<br />
Reduced<br />
<strong>Wire</strong> rope exit direction<br />
Standard (top exit)<br />
Side exit (left)<br />
Side exit (right)<br />
Bottom exit<br />
-<br />
004<br />
-<br />
E1<br />
E2<br />
E3<br />
-<br />
P2K<br />
P5K<br />
P10K<br />
-<br />
SI<br />
Potentiometer resistance (for VP-A only)<br />
Standard 1 kΩ<br />
2 kΩ<br />
5 kΩ<br />
10 kΩ<br />
Output signal<br />
Standard not reversed<br />
Reversed<br />
-<br />
N6<br />
SS<br />
Housing material, protection class<br />
Standard: anodised aluminium, IP65<br />
anodised aluminium, IP68<br />
corrosion free stainless steel + plastics, IP68<br />
WARNING NOTICES<br />
• Don‘t let the rope snap back. If the rope is retracted freely, this may lead to injuries (whiplash effect) and the device may be damaged.<br />
Caution when unhooking and retracting the rope into the sensor.<br />
• Never exceed the specified measurement range when extracting the rope!<br />
• Do not try to open the device. The stored energy of the spring drive may lead to injuries when being mishandled.<br />
• Do not touch the rope when operating the sensor.<br />
• Avoid guiding the rope over edges or corners. Use a deflection pulley instead.<br />
• Do not operate the sensor if the rope is buckled or damaged. A ripping of the rope may lead to injuries or a damaging of the sensor.<br />
Subject to change without prior notice.<br />
WayCon Positionsmesstechnik GmbH<br />
email: info@waycon.de<br />
internet: www.waycon.de<br />
Head Office<br />
Mehlbeerenstr. 4<br />
82024 Taufkirchen<br />
Tel. +49 (0)89 67 97 13-0<br />
Fax +49 (0)89 67 97 13-250<br />
Office Köln<br />
Auf der Pehle 1<br />
50321 Brühl<br />
Tel. +49 (0)2232 56 79 44<br />
Fax +49 (0)2232 56 79 45
Change language