Manual & Installation Guide - Evoluce AG
Manual & Installation Guide - Evoluce AG
Manual & Installation Guide - Evoluce AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4) Please copy the complete license-file (license.txt), which you have received after the purchase<br />
process by email from www.shareit.com, in the same directory of your WIN&I Media Viewer installation<br />
as shown in the following image:<br />
5) Set the sensor below or above your TV/Monitor. Ideally, the sensor should be within 6 inches (15<br />
cm) above or below your TV/Monitor. Place it on a safe and secure surface.<br />
Make sure there’s no direct sunlight on the sensor or you. Clear the space between you and the<br />
sensor. Tilt the sensor in the direction toward your hands. You will get best performance in a distance<br />
from 0.8 – 3.5 m from the sensor.<br />
Now connect the Kinect for Windows sensor with your PC. Plug one end of the cable into the USB port<br />
of your PC and the other end into an electrical outlet.<br />
Make sure that the Kinect Sensor is already installed and the Windows device installation icon on the<br />
right button of your screen is no longer active before continuing the installation.<br />
.<br />
5