TIMBER DESIGNS - Tesrol Doors
TIMBER DESIGNS - Tesrol Doors
TIMBER DESIGNS - Tesrol Doors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TIMBER</strong><br />
<strong>DESIGNS</strong><br />
www.tesrol.com.au
SOLID <strong>TIMBER</strong> - Designs<br />
SQUARE<br />
ARCH<br />
DOUBLE ARCH<br />
SQUARE<br />
ARCH DOUBLE ARCH<br />
WITH ‘V’ GROOVE<br />
RAILS<br />
Bevel top &<br />
bottom rails<br />
only<br />
RAIL - Standard<br />
RAIL - Bevel<br />
Step Splay on<br />
all 4 sides<br />
RAIL - Colonial<br />
RAIL - Step Splay<br />
Splay on all 4<br />
sides<br />
RAIL - SQ 0<br />
RAIL - Splay<br />
RAIL - Shaker<br />
RAIL - Victorian<br />
CENTRE PANELS<br />
For Edge Profiles see Page 39<br />
PANEL - Raised Panel Solid<br />
PANEL - Contour Panel Solid<br />
PANEL - Flat Panel Solid<br />
PANEL - ‘V’ Groove Solid<br />
PANEL - Flat Panel Veneer<br />
l SCALE 1:1 drawings are approximate sizes only<br />
PANEL - ‘V’ Groove Veneer<br />
31 <strong>Tesrol</strong> 1300 837 765 - August 2012
SOLID <strong>TIMBER</strong> - Standard Rail Designs<br />
SCALE 1:1<br />
PANEL - Raised Panel Solid<br />
Min Height: Square 200 – Arch 230 – Double Arch 260. Leaves 20mm flat on panel<br />
Min Width: Square 200 – Arch 230 – Double Arch 230. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Square / Arch or Double Arch<br />
Rail<br />
Standard<br />
Square<br />
Arch<br />
Double Arch<br />
Panel<br />
Raised Panel Solid<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
PANEL - Flat Panel Solid<br />
SCALE 1:1<br />
Min Height: Square 150 – Arch 180 – Double Arch 210. Leaves 20mm flat on panel<br />
Square<br />
Arch<br />
Double Arch<br />
Min Width: Square 150 – Arch 230 – Double Arch 230. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square / Arch or Double Arch<br />
Standard<br />
Flat Panel Veneer or Flat Panel Solid<br />
STANDARD<br />
RAIL<br />
Square<br />
Arch<br />
Double Arch<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
PANEL - ‘V’ Groove Solid<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
SCALE 1:1<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
Design<br />
Rail<br />
Panel<br />
Square / Arch or Double Arch<br />
Standard<br />
‘V’ Groove Veneer or ‘V’ Groove Solid<br />
For Edges see Page 37<br />
l SCALE 1:1 drawings are approximate sizes only<br />
31 <strong>Tesrol</strong> 1300 837 765 - August 2011
SOLID <strong>TIMBER</strong> - SQ 0 Rail Designs<br />
SCALE 1:1<br />
Min Height: Square 200mm. Leaves 20mm flat on panel<br />
PANEL - Raised Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN SQ 0<br />
NOT<br />
AVAILABLE<br />
IN SQ 0<br />
Min Width: Square 200mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design Square<br />
Rail SQ 0<br />
Panel Raised Panel Solid<br />
Square<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
PANEL - Flat Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN SQ 0<br />
NOT<br />
AVAILABLE<br />
IN SQ 0<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 150mm. Leaves 20mm flat on panel<br />
Order example:<br />
SCALE 1:1<br />
Square<br />
Design<br />
Square<br />
Rail SQ 0<br />
Panel<br />
Flat Panel Veneer or Flat Panel Solid<br />
SQ 0 RAIL<br />
NOT<br />
AVAILABLE<br />
IN SQ 0<br />
NOT<br />
AVAILABLE<br />
IN SQ 0<br />
Square<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
PANEL - ‘V’ Groove Solid<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
Design Square<br />
Rail SQ 0<br />
Panel ‘V’ Groove Veneer or ‘V’ Groove Solid<br />
SCALE 1:1<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
For Edges see Page 37<br />
<strong>Tesrol</strong> 1300 837 765 - August 2011<br />
32<br />
l SCALE 1:1 drawings are approximate sizes only
SOLID <strong>TIMBER</strong> - Bevel Rail Designs<br />
NOTE:<br />
BEVEL WITH RAISED PANEL<br />
IS NOT AVAILABLE<br />
Min Height: Square 200mm. Leaves 20mm flat on panel<br />
SCALE 1:1<br />
PANEL - Raised Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
Min Width: Square 200mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Bevel<br />
Raised Panel Solid<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
PANEL - Flat Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 150mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design Square<br />
Rail Bevel<br />
SCALE 1:1<br />
Square<br />
NOTE: BEVEL ON<br />
TOP & BOTTOM<br />
RAILS ONLY<br />
Panel<br />
Flat Panel Veneer or Flat Panel Solid<br />
SQ 0 ON<br />
VERTICAL RAILS<br />
BEVEL RAIL<br />
BEVEL ON TOP<br />
& BOTTOM<br />
RAILS<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
NOT<br />
AVAILABLE<br />
IN BEVEL<br />
Square<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
PANEL - ‘V’ Groove Solid<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
SCALE 1:1<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Bevel<br />
‘V’ Groove Veneer or ‘V’ Groove Solid<br />
For Edges see Page 37<br />
l SCALE 1:1 drawings are approximate sizes only<br />
33 <strong>Tesrol</strong> 1300 837 765 - August 2011
SOLID <strong>TIMBER</strong> - Splay Rail Designs<br />
NOTE:<br />
SPLAY WITH RAISED PANEL IS<br />
NOT AVAILABLE<br />
Min Height: Square 200mm. Leaves 20mm flat on panel<br />
SCALE 1:1<br />
PANEL - Raised Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
Min Width: Square 200mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Splay<br />
Raised Panel Solid<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
PANEL - Flat Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 150mm. Leaves 20mm flat on panel<br />
Order example:<br />
SCALE 1:1<br />
Square<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Splay<br />
Flat Panel Veneer or Flat Panel Solid<br />
SPLAY ON<br />
VERTICAL AND<br />
HORIZONTAL<br />
RAILS<br />
SPLAY RAIL<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
NOT<br />
AVAILABLE<br />
IN SPLAY<br />
Square<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
PANEL - ‘V’ Groove Solid<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
SCALE 1:1<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Splay<br />
‘V’ Groove Veneer or ‘V’ Groove Solid<br />
For Edges see Page 37<br />
<strong>Tesrol</strong> 1300 837 765 - August 2011<br />
34<br />
l SCALE 1:1 drawings are approximate sizes only
SOLID <strong>TIMBER</strong> - Step Splay Rail Designs<br />
NOTE:<br />
STEP SPLAY WITH RAISED<br />
PANEL IS NOT AVAILABLE<br />
Min Height: Square 200mm. Leaves 20mm flat on panel<br />
Min Width: Square 200mm. Leaves 20mm flat on panel<br />
SCALE 1:1<br />
PANEL - Raised Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Step Splay<br />
Raised Panel Solid<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
PANEL - Flat Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 150mm. Leaves 20mm flat on panel<br />
Order example:<br />
SCALE 1:1<br />
Square<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Step Splay<br />
Flat Panel Veneer or Flat Panel Solid<br />
SPLAY ON<br />
VERTICAL AND<br />
HORIZONTAL<br />
RAILS<br />
STEP SPLAY<br />
RAIL<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
NOT<br />
AVAILABLE<br />
IN STEP<br />
SPLAY<br />
Square<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
PANEL - ‘V’ Groove Solid<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
SCALE 1:1<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Step Splay<br />
‘V’ Groove Veneer or ‘V’ Groove Solid<br />
For Edges see Page 37<br />
l SCALE 1:1 drawings are approximate sizes only<br />
35 <strong>Tesrol</strong> 1300 837 765 - August 2011
SOLID <strong>TIMBER</strong> - Shaker Rail Designs<br />
SCALE 1:1<br />
Min Height: Square 200mm. Leaves 20mm flat on panel<br />
PANEL - Raised Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN SHAKER<br />
NOT<br />
AVAILABLE<br />
IN SHAKER<br />
Min Width: Square 200mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Shaker<br />
Raised Panel Solid<br />
Square<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
PANEL - Flat Panel Solid<br />
NOT<br />
AVAILABLE<br />
IN SHAKER<br />
NOT<br />
AVAILABLE<br />
IN SHAKER<br />
SCALE 1:1<br />
Square<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 150mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Shaker<br />
Flat Panel Veneer or Flat Panel Solid<br />
SHAKER<br />
RAIL<br />
NOT<br />
AVAILABLE<br />
IN SHAKER<br />
NOT<br />
AVAILABLE<br />
IN SHAKER<br />
Square<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
PANEL - ‘V’ Groove Solid<br />
SCALE 1:1<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Shaker<br />
‘V’ Groove Veneer or ‘V’ Groove Solid<br />
For Edges see Page 37<br />
<strong>Tesrol</strong> 1300 837 765 - August 2011<br />
36<br />
l SCALE 1:1 drawings are approximate sizes only
SOLID <strong>TIMBER</strong> - Victorian Rail Designs<br />
8<br />
29<br />
Solid Timber<br />
BOLECTION MOULD<br />
Also sold separately<br />
Square<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
PANEL - Flat Panel Veneer<br />
SCALE 1:1<br />
Min Height: Square 210mm. Leaves 20mm flat on panel<br />
Min Width: Square 210mm. Leaves 20mm flat on panel<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Victorian<br />
Flat Panel Veneer<br />
NOTE: Victorian is<br />
only available with<br />
veneer centre panel.<br />
VICTORIAN<br />
RAIL<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
Square<br />
PANEL - ‘V’ Groove Veneer<br />
SCALE 1:1<br />
Min Height: Square 210mm. Leaves 20mm flat on panel<br />
Min Width: Square 235mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
Design Square<br />
Rail Victorian<br />
Panel ‘V’ Groove Panel Veneer<br />
NOTE: Victorian is<br />
only available with<br />
veneer centre panel.<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
EDGES<br />
EP 2 EP 3S EP 3 EP 7<br />
SCALE 1:1 SCALE 1:1 SCALE 1:1 SCALE 1:1<br />
Approximate<br />
Thickness<br />
20mm.<br />
l SCALE 1:1 drawings are approximate sizes only<br />
37 <strong>Tesrol</strong> 1300 837 765 - August 2011
<strong>TIMBER</strong> VENEER - SQ0 Veneer<br />
SQUARE<br />
VENEER<br />
RAIL<br />
NOT<br />
AVAILABLE<br />
IN VENEER<br />
NOT<br />
AVAILABLE<br />
IN VENEER<br />
Square<br />
EDGING: Only available with 0.4mm edging.<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 150mm. Leaves 20mm flat on panel<br />
MDF - MR<br />
PANEL - Flat Panel Veneer<br />
Order example:<br />
Design<br />
Rail<br />
Square<br />
SQ 0 Veneer<br />
Panel<br />
Flat Panel Veneer or Flat Panel Solid<br />
MDF - MR<br />
PANEL - ‘V’ Groove Veneer<br />
Min Height: Square 150mm. Leaves 20mm flat on panel<br />
Min Width: Square 175mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
NOTE: ‘V’ Grooves approximately 5mm wide and 60mm apart.<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
SQ 0 Veneer<br />
‘V’ Groove Veneer or ‘V’ Groove Solid<br />
Full Width Edging<br />
on all veneer<br />
doors<br />
NOT<br />
AVAILABLE<br />
IN VENEER<br />
NOT<br />
AVAILABLE<br />
IN VENEER<br />
Square<br />
VENEER DOOR<br />
WITH CROSS<br />
RAILS<br />
This custom effect with grain<br />
running in two directions<br />
can be achieved in the<br />
same species or in different<br />
contrasting species.<br />
<strong>Tesrol</strong> 1300 837 765 - August 2011<br />
38<br />
l SCALE 1:1 drawings are approximate sizes only
<strong>TIMBER</strong> VENEER - Victorian Veneer<br />
8<br />
29<br />
Solid Timber<br />
BOLECTION MOULD<br />
Also sold separately<br />
Square<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
EDGING: Only available with 0.4mm edging.<br />
MDF - MR<br />
PANEL - Flat Panel Veneer<br />
NOTE: Victorian is<br />
only available with<br />
veneer centre panel.<br />
Min Height: Square 210mm. Leaves 20mm flat on panel<br />
Min Width: Square 210mm. Leaves 20mm flat on panel<br />
Full Width Edging<br />
on all veneer<br />
doors<br />
Order example:<br />
Design<br />
Rail<br />
Panel<br />
Square<br />
Victorian Veneer<br />
Flat Panel Veneer<br />
VICTORIAN<br />
RAIL<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
NOT<br />
AVAILABLE<br />
IN<br />
VICTORIAN<br />
Square<br />
EDGING: Only available with 0.4mm edging.<br />
PANEL - ‘V’ Groove Veneer<br />
MDF - MR<br />
Min Height: Square 210mm. Leaves 20mm flat on panel<br />
Min Width: Square 235mm. Leaves 45mm flat on panel, includes ‘V’ Groove<br />
Order example:<br />
Design Square<br />
NOTE: Victorian is<br />
Rail Victorian Veneer<br />
only available with<br />
Panel ‘V’ Groove Panel Veneer<br />
veneer centre panel.<br />
Full Width Edging<br />
on all veneer<br />
doors<br />
NOTE: ‘V’ Grooves<br />
approximately<br />
5mm wide and<br />
60mm apart.<br />
l SCALE 1:1 drawings are approximate sizes only<br />
39 <strong>Tesrol</strong> 1300 837 765 - August 2011
TESROL HEAD OFFICE<br />
405 Victoria Street<br />
Wetherill Park, NSW 2164 Australia<br />
T: 1300 83 77 65<br />
F: 1300 83 77 75<br />
E: sales@tesrol.com.au<br />
W: www.tesrol.com.au<br />
OUR GUARANTEE<br />
<strong>Tesrol</strong>’s commitment to quality guarantees all our Vacuum Formed<br />
products for a period of 7 years against manufacturing or material faults.<br />
Copyright <strong>Tesrol</strong> Joinery Pty Ltd. All photographs and information in this<br />
publication are the sole property of <strong>Tesrol</strong> Joinery Pty Ltd and cannot<br />
be reproduced or copied for any other advertising purpose in any form<br />
without written permission from <strong>Tesrol</strong> Joinery Pty Ltd.<br />
<strong>Tesrol</strong> is a division of <strong>Tesrol</strong> Joinery Pty Ltd.<br />
ACN 003 111 224 ABN 32 181 159 886<br />
www.tesrol.com.au
Change language