04-31 F37 Klimaatregelaar MTT (GB) - Farmi Tilatech Oy

POULTRY
F37 CLIMATE CONTROLLER
Exhaust
• Maximum 10 relays controlled, optionally combined with a linear fan control (Combi or EC-
Combi).
• Linear Fan control enables to control controllable fans (via triac, frequency controller, EC-fans,
ITM) or modulating ON/OFF fans. Rotation (changing between fans) can be used with
modulating fans.
• Up to maximum 4 ITM’s can be controlled using the I/O network.
• Separate vortex damper control, linked to linear exhaust using a settable factor.
Inlet control
• 2 Inlet controls (2 zones) to control inlets or valves using the same setting. The valves can
mutually be corrected based on temperature difference.
• 1 Tunnel inlet. Separate inlet control to control a tunnel shutter or curtain.
Curve
• The following settings can be programmed in a curve (maximum 20 setpoints):
- Day number
- House temperature
- Extra temperature (e.g. for heating)
- Desired RH
- Animal weight
- Minimum ventilation (in m 3 /kg/h)
- Maximum ventilation (in % or a tunnel position)
Heating / cooling / humidification
• 3 Heating controls, ON/OFF, time modulating, analog, based on their own sensor and linked
to:
- the house temperature or
- an extra temperature
• 2 Cooling control, ON/OFF or time modulating, based on their own sensor and linked to:
- the house temperature or
- the house temperature + bandwidth or
- an extra temperature or
- the first tunnel position
• 1 Humidification control, ON/OFF or time modulating based on relative humidity in the house.
• Heat demand through F-Net; in combination with a central heating control (e.g. F21).
• OptiSec® control
Time clocks and registration
• 1 Feed clock enabling to enter maximum 24 start and stop times for feeding. Feed
consumption is registered for a settable time interval (Management & Monitoring ® ), of today,
yesterday, day before yesterday and total. A pulsed weighing system or external weighing
systems generating pulses (e.g. directly on an auger) can be used for registration. Feed flow
(under- and overflow) alarm and maximum runtime alarm.
• 1 Water clock enabling to enter maximum 24 start and stop times for water dosage. Water
consumption is registered for a settable time interval (Management & Monitoring ® ), of today,
yesterday, day before yesterday and total. A water meter can be used for the water
registration. Water flow (leakage, under- and overflow) alarm.
• 8 Light clocks enabling to enter maximum 24 start and stop times. Setting possibilities:
increase/decrease times (dimmer functions), settable light intensity (with light meter) and
connection to light curve.
• 4 Time clock enabling to enter maximum 24 start and stop times. This time clock has several
applications, but no registration functions.
4-4-12 / All rights reserved PAGE 04-31-2