Ceracube® Dental CAD/CAM System - ECHO Specialized Center in ...

More Than Digital Dentistry - Ceracube
Ceracube ®
Dental CAD/CAM System

More Than Digital Dentistry - Ceracube
Ceracube ®
Dental CAD/CAM System
Scan
Ceracube ® 3DS
White light scanning
Twin-camera technology
Texture scanning
Design
Ceracube ® CAD
More Than Digital Dentistry
The complete dental CAD solution
Fast and easy to use
Wide range of indications
Powerful
Ceracube CAD/CAM system uses the best components to deliver full satisfaction
to users.
Reliable
Having deep knowledge and experience in digital dentistry, Ceracube CAD/CAM
provides seamless workflow to users. All components have gone through careful
optimization process.
Make
Ceracube ® M5
5-Axis simultaneous
Optimized for zirconia
Compact
30,000 RPM / 450W power spindle
Optimized
From the early R&D stage the Ceracube CAD/CAM system has been conducted
with thorough testing, which means that labs can count on our system for their
everyday use.
Material BruxZir ®
High-translucency full crown zirconia
Strength that can withstand hammer test
Approved by US FDA and Europe CE

Ceracube ®
3D measurement for quality and speed
3DS - White Light Scanner
Accuracy where it all starts
in CAD/CAM
Ceracube 3DS,
The most powerful dental scanner on the market,
boasts supreme precision, reliabilty, processing speed
and user-friendliness
White light scanning
The white light 3D scanning technology allows the user to obtain data
that are much clearer than the conventional laser type. This feature
realizes clearer (noise-free) 3D data.
Twin-camera technology
Ceracube 3DS obtains digital images with two cameras. Precision of
the data obtained by Ceracube 3DS is highly superior when compared
with other scanners which obtain data with a single camera.
High accuracy
Exceptionally better margin accuracy when compared to that of
conventional scanners.
Texture Superimposition
The most tedious job in CAD/CAM is to set the margin line virtually.
By using Texture Superimposition, the pencil marking on the actual
stone model can be visualized on the 3D model to help technicians
easily identify margin lines and other markings.
This will not only speed up the modeling process but also help create
margin lines very accurately as intended.
» User-friendly GUI
Easy step by step process that is
intuitive and easy to use
Specification
Size (wxdxh)
Weight (kg)
Scan area (mm)
Accuracy (mm)
Scanning Principle
» High speed scannig
Able to scan single-die in 1 min.,
full-arch in 3mins 30sec
212 x 370 x 449
16.6
80 x 60 x 60
± 0.01mm
Phase-shifting optical triangulation, twin camera
» Auto calibraiton
Simple and fast calibration process
» Multi-die scanning
Scans upto 8 individual dies at the
same time
Ceracube CAD/CAM System_ 05

Ceracube ®
Setting new standards in usability and productivity
CAD - Designing Software
The most intuitive CAD
in the market
» Implant module
Ceracube® CAD add-on for the design of abutments and
screw-retained bridges.
Implant module
Ceracube’s Implant Module is available as an add-on for our CAD
platform. With this module, custom abutments and screw-retained
bridges can be designed.
Custom abutment design
With Ceracube‘s implant module, the construction of custom
abutments is easy and straight-forward.
SCRP (screw-cement retained prosthesis)
SCRP can be done with Ceracube CAD by creating screw holes.
The complete dental CAD solution
Ceracube CAD is an advanced CAD system for dental applications, targeted at the
OEM market. From work flow management to CAD construction and preparation
of production, Ceracube CAD provides an integrated solution for dental technicians.
» Virtual articulator
Ceracube® CAD add-on for
considering dynamic occlusion
» Bar module
Ceracube® CAD add-on for
advanced dental bar design
» Bite splint module
Therapeutic night guards can be
designed quickly and in high quality
» TruSmile technology
Realistic rendering of dental
restorations in real-time
Fast and easy to use
Ceracube’s CAD platform is known for its speedy operation and ease of use - helping
you minimize training costs and maximize productivity. It is reliable and robust even
when dealing with complex cases on a daily basis.
Specification
Basic indications
- Anatomic crowns
- Anatomic copings
- Offset copings
- Bridge frameworks
- Inlays
- Onlays
- Veneers
- Waxup digital copy milling
- Waxup-based frameworks
- Primary telescopes
Add on
- Implant module
- Virtual articulator
- Bar module
- Bite splint module
- TruSmile technology
Inlay bridge
Ceracube CAD/CAM System_ 07

Ceracube ®
M5- The 5 Axis Mill
A compact, yet powerful mill that can suit everyday lab use
» Head Tilting 5-Axis
The M5 5-axis uses the head-tilting
technolgy that rotates the spindle,
which provides more internal space
» Milling Burs
Diverse use of burs of Ø0.5 ~ Ø2 mm
in diameter
» Intuitive UI
Provides easy-to-use user interface
that has low learning curve
» Auto Tool Change
Can switch between 4 tools
automatically
The CAM Technololgy of Ceracube M5
A breakthrough
for compact 5-Axis Mill
hyperDENT®
Ceracube M5 has implemented the cutting-edge CAM module, hyperDENT®, from Open Mind in
Germany that has been developing high-end industrial CAM for nearly 20 years. hyperDENT® is based
on routines in dental laboratories and enables accurate digital manufacturing of dental prostheses.
Highly automated
Ceracube CAM is a highly automated programming system. Only a few mouse clicks and keystrokes
are needed to create entire NC programs. This is made possible through an automated menu design,
easy-to-use interface and a host of automated functions.
Optimized for Zirconia
The whole system is designed and optimized to mill zirconium oxide (ZrO2)
which is the most popular material in CAD/CAM applications. Ceracube M5
has gone through full integration process with the leading CAM software,
hyperDent, which provides zirconia milling strategies for various indications.
Simultaneous 5-Axis Machining
Ceracube M5 can mill high complexity zirconia prosthetics with simultaneous
5-axis movement and the head axis can tilt up to 25 degrees for maximum
freedom. Its compact, high frequency spindle boasts 30,000 RPM and 450W
power output.
Amazingly Compact
450 x 490 x 382mm size is by far the smallest dental 5-axis machine in the
market and is perfect for small to medium sized labs.
Everything is possible
With Ceracube CAM, a broad range of dental prostheses can be milled reliably and economically.
Being able to save machining templates reduces programming effort and ensures the highest
possible process reliability.
Finish an NC program in only a few short steps:
Automatic operator guidance, a clear user interface and many fully automated functions ensure the
program is reliable and easy to use. CAM and milling expertise aren’t required. The use of well-known
technical terms ensures fast learning. With the basic version, users with little CAM experience can
produce milling programs quickly and easily.
Specification
Size(wxdxh)
Weight (kg)
Spindle
Axis
Driver motor
450 x 490 x 382
35
30,000 RPM / 450W
Simultaneous 5 axis
Step motor
Ceracube CAD/CAM System_ 09

BruxZir ® *
BruxZir Solid Zirconia Crowns & Bridges
>> Scientific Validation
BruxZir Solid Zirconia crowns & bridges are made from the highest quality zirconia powder from Japan. We chemically and physically reprocess
the powder to further reduce the zirconia particle sizes. BruxZir milling blanks are then created through a unique patent-pending process.
Unlike conventional high-pressure milling blank manufacture, our processing gives BruxZir zirconia improved light transmission, which
provides a lower, more natural shade value.
>> Light Transmission vs. Color Wavelength
55
Light Transmission vs. Color Wavelength
50
zirconia
Light Transmission (%)
45
40
Other full-contour zirconia materials
SEM of sintered isostatically
pressed zirconia
SEM of sintered
BruxZir Solid zirconia
35
Spectrophotometer: PerkinElmer LAMBDA 35 UV/Vis System
National Institute Standards (NIST) calibrated.
20 mm x 20 mm x .60 mm sample.
The Zirconia that stands out from
other zirconia
30
400 425 450 475 500 525 550 575 600 625 650 675 700
Color Wavelength (nm)
zirconia exhibits higher translucency in the warm color spectral
wavelength (>550 nanometers), allowing for more natural-looking restorations.
Bruxzir zirconia exhibits higher translucency in the warm color
spectral wavelength (>550 nanometers), allowing for more
natural-looking restorations
The 50% smaller average grain size of BruxZir zirconia improves its
physical properties.
Volume (mm 3 )
Volume (mm 3 )
Forget about your typical full crown zirconia.
Strength of zirconia, shade of porcelain,
... it‘s the dream restoration.
BruxZir restoration was made to recreate the natural esthetics
- Superb esthetics that recreates natural dentition
- Enamel based on high-translucency.
- Strength that can withstand hammer test.
- Approved by US FDA and Europe CE.
>> Wear Compatibility
In a recent study* to measure the volumetric loss of enamel,
glazed BruxZir zirconia was found to wear compatible with
enamel and virtually identical to glazed IPS e.max.
* Wear of Enamel on Polished and Glazed Zirconia: Shah S, Michelson C, Beck P,
et al. 2010; Washington, DC: AADR. Abstract #129615.
Specification
Diameter
Height
>> Antagonist Wear
The antagonistic (Steatite balls) wear shows BruxZir
zirconia only with 72±21 microns, which is significantly
lower than Ceramco®3 (110±48 microns).
The University of Tübingen study was run using an
eight chamber Willytec Chewing Simulator at 1.2
million cycles.
No Step
With Step
Z - Type
98mm
98mm
95mm
12 / 15 / 20 / 25 (mm)
12 / 15 / 20 / 25 (mm)
10 / 14 / 18 / 22 (mm)
* BruxZir is a registered trademark of Glidewell Laboratories in USA
Ceracube CAD/CAM System_ 11

T : +82-2-2193-9670 sales@ceracube.com www.ceracube.com