Andrew Greenall & Bill Green, Castings Technology International

ePAPER READ

DOWNLOAD ePAPER

castingstechnology.com

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Waste

sand

Disused sludge

lagoon

Abatement

dust spillage

Leak from

“empty drum

David Brierley, Bridge Insurance Brokers Ltd - Castings Technology ...

The Replicast Process* - Castings Technology International

Risk-Based Management of Land Contamination at Foundry Sites

Risk Assessment of Contamination at Foundry Sites - Castings ...

e-News - Castings Technology International

3D Modelling allows Severn Glocon to Improve Market - Castings ...

Rapid Manufacture Rings the Bell for Brass Founders - Castings ...

Recommendations for Foundry Owners and Operators - Castings ...

APPENDIX II Detailed Lists of Potential Contaminants at Foundry Sites

8 REMEDIATION OPTIONS - Castings Technology International

Cti e-News - Castings Technology International

Verbatim transcript of presentation by Dr. Mike Ashton, Chief ...

Glossary of Foundry Terms and Abbreviations - Castings ...

Peglers Tap into Rapid Manufacturing Technology - Castings ...

Waste sand Disused sludge lagoon Abatement dust spillage Leak from “empty drum

Non-direct pathways Deposition from air emissions - melting • Metals melted and their alloy constituents • Contaminants from scrap – PAH, PCDD/F from combustion, PCB. • Refractories, fluxing agents – fluorides and chlorides Also from • Finishing, fettling etc – metals and their oxides • Sand plants, knock out, reclamation – silica, binders, coal dust.

Page 1 and 2: LAND CONTAMINATION AT FOUNDRY SITES
Page 3 and 4: Section through F E Caster and Sons
Page 5 and 6: Raw materials Metallic inputs •In
Page 7 and 8: Mould and coremaking materials Sand
Page 9 and 10: Oils/Fuels • Coke - Cupolas • G
Page 11: Wastes Abatement wastes • Cupola
Page 15 and 16: HISTORIC DEPOSITION 12 tonnes/hour
Page 17 and 18: Groundwater Made ground Natural str

Andrew Greenall & Bill Green, Castings Technology International

Create successful ePaper yourself

Delete template?

Save as template?