Water Filters and Cleaners - Eastern

NU-PLUS ® by Everpure ®
Reduce water-related ice machine problems caused by dirt, objectionable tastes and odor and by scale buildup.
Pre-coat submicron filtration reduces particles as small as 1/2 micron along with chlorine and other
offensive contaminants, and the feed of 6R Micromet ® inhibits scale build-up caused by dissolved minerals.
NSF Certified under NSF/ANSI Standards 42 and 53.
Part # 4621-10 nu-i2000 2 :
Capacity: 9,000 gallons
750 lbs. for most cubers
1,500 lbs. for most flakers
Part # 4621-11 nu-i4000 2 :
Capacity: 12,000 gallons
1,000 lbs. for most cubers
2,000 lbs. for most flakers
nu-MC 2 & nu-XC
Reduces chlorine taste and odor and other offensive contaminants that can adversely affect the taste of
fountain beverages. Pre-coat submicron filtration reduces particles as small as 1/2 micron, and it helps retain
carbonation in drinks. NSF Certified under NSF/ANSI Standards 42 and 53.
Part # 4621-20 nu-MC 2 :
Capacity: 9,000 gallons
Part # 4321-21 nu-XC 2 :
Capacity:12,000
Micro-Plus – Water Treatment Products
The complete treatment program for commercial ice makers. Coffee urns, brewers, beverage machines and
other water-using equipment such as humidifiers, steamers, and residential refrigerator ice makers.
Eliminate lime scale formation. Remove silt, sediment and other suspended matter, chlorine and objectional
tastes and odors
* Complete treatment for up to six months.
* 1/4” FPT connections
Part # Gallons per day Ice Makers Coffee Makers
Per day
Per week
4615-W3 MICRO-PLUS 2 12.5 TO 125 LBS 25 LBS.WEEK
4615-W3 MICRO-PLUS 3 25 TO 250 LBS 50 LBS. WEEK
4615-Y8 MICRO-PLUS 8 50 TO 500 LBS 100 LBS WEEK
4614-Y8 MICRO-PLUS 16 100 TO 1000 LBS. 200 LBS.WEEK

NP Series – Water Filters
A customized or “problem specific” approach to correcting water related problems in ice machines, water
fountains, coffee urns, beverage machines, and other commercial and residential potable water applications:
Can be installed in series of two or three.
Part #
Description
4702-24 NP24DD Housing 3/8 FPT
4714-24 NP48DD Housing 1/2 FPT
4705-87* NP246R Micromet Cartridge
4715-87* NP486R Micromet Cartridge
4702-87* NP24S Sediment Cartridge
4712-87* NP48S Sediment Cartridge
4711-87* NP48C Carbon Cartridge
4706-87* NP24PC 6R Micromet/Carbon Cart.
4716-87* NP48PC 6R Micromet/Carbon Cart.
4707-87* NP24PS 6R Micromet/Sediment Cart.
4717-87* NP48PS 6R Micromet/Sediment Cart.
NP2BR Bracket for two NP housings in series
NP3BR Bracket for three NP housings in series
*NSF
CARTRIDGE TYPE
NP24 SERIES NP48 SERIES
S CARTRIDGE SEDIMENT 200 GAL 400 GAL
C CARTRIDGE SEDIMENT TASTE ODOR 200 GAL 400 GAL
6R CARTRIDGE SCALE 100 GAL 200 GAL
PC CARTRIDGE SEDIMENT TASTE ODOR SCALE 65 GAL 135 GAL
PS CARTRIDGE SEDIMENT SCALE N/A 60 GAL
Water Sample Kit: #W017-0
When to collect a water sample for testing purposes:
When you are not familiar with the water in the area.
When problems arise in a system that is undergoing water treatment. (Note: To analyze this condition,
send a sample of the recirculating water and the make up water.)
The sample will be sent to Nu-Calgon, a data sheet and recommended procedures will be sent to you after
testing. There is no charge for this service.

Ice Guard A Slime Control System
Ice Guard AP advanced protection slime control utilized Nano Titanium technology to inhibit the formation
of bacteria in ice machines. This material is in a stick form that can be placed in the sump of the ice machine.
As the water circulates across this advanced media, it destroys and absorbs slime producing organisms. The
ice Guard AP continuously treats the sump water for up to 6 months. Replace every 3-4 months in bread and
pastry baking environments. One stick will treated a machine producing up to 1200 lbs. of ice per day.
• One unit can protect up to a 1200 lb ice maker for up to 6 months.
• All components are NSF listed.
• Inhibits slime from waterborne bacteria.
• Enhances quality of ice.
Mini Ice Guard AP
Smaller verison of Ice Guard AP that is designed to fit in machines with smaller sumps. Provided 3-4 months
protection in machines up to 400 lbs.
Part # 4209-06 Ice Guard AP
4209-05 Mini Ice Guard A/
IMS-II Sanitizing Concentrate
IMS-II is a sanitizing concentrate formulated exclusively to sanitize hard,
non-porous surfaces to eliminate odors and slime growths. No rinsing is required.
Formulated for general use in ice machines, ice cream dispensing equipment
and other food processing equipment.
Part # 4211-34
Liquid Ice Machine Cleaner
Liquid Ice Machine Cleaner is formulated for 75% phosphoric acid
for removing scale deposits from ice machines and coffee urns.
It is a food-grade liquid acid that is fast acting yet safe to use in this equipment.
It does not give off any harsh fumes or contain chlorine or chlorides that would
attack stainless steel.
Part # 4207-47 8 fl.oz- 13.2 net wt. bottle
4207-08 4 liter
Nickel Safe Ice Machine Cleaner
A specially formulated product for removing scale deposits from ice machines
having nickel-plated or tin-plated evaporators. Acceptable for use on
Manitowoc and other manufacturers using nickel plated evaporators
4287-34 16 oz bottle
4287-08 1 Gallon

Aqua Pure AP 11T
Water Filter for Cold water.
3/4 in. pipe connections and Transparent sump.
AP110 filter cartridge and Wrench included.
Flow Rate: 8 gpm.
Part # AP11T
Replacement Cartridges
Dirt, taste, rust, odor
This filter also removes scale (white residue from your pipes).
Part # AP117
AP420
Dirt, Rust and Sediment Cartridges.
Part # AP110 2/pk
Dirt/Rust/Scale filter for cold water.
Part # AP420 2/pk
AP110
AP117