Technical Data - Link-Belt Construction Equipment

14 5548 (supersedes 5491)---0409---N5
Working Weights
Based on basic crane including Mitsubishi 6D24---TLA2L diesel engine, turntable bearing,
independent hydraulic powered drums, boom hoist limiting device, independent hydraulic
swing and travel, counterweight, swing brake, drum rotation indicators, and crawler lower with
44 in (1.12m) wide track shoes, sealed track rollers, catwalks, hydraulic boom foot pin removal,
plus the following:
Lifting crane --- includes 50 ft (15.24m) basic tubular boom, 30 ft (9.14m) live mast, 1,050 ft
(320.04m) of 7/8 in (22mm) diameter wire rope, 850 ft (259.08m) of 7/8 in (22mm) diameter
boom hoist rope, 125 Ton (113.4mt) hook block, and basic pendants.
Ctwt “A” Ctwt “AB”
lb
(kg)
198,217
(89 910)
lb
(kg)
224,217
(101 703)
Ctwt “ABC” +
“A” Lower
Ctwt
lb
(kg)
298,217
(135 269)
Ctwt “ABCD”
+“A”Lower
Ctwt
lb
(kg)
324,217
(147 062)
Ground Bearing Pressure
psi
kg/cm
7.3 8.3 11.0 12.0
2 Transport Weights
0.51 0.58 0.77 0.84
Base Crane: Rigid boom backstops, 77 gal (291L) of fuel, catwalks (both sides), 30 ft (9.14m) live mast, bail, boom hoist rope, boom base section, 10 ft
(3.05m) self---assembly section, 1,050 ft (320.04m) of type “LB” front hoist rope, and 850 ft (259.08m) of type “RB” rear hoist rope.
Item Description
Base Crane 83,332 37 799 1
Gross Weight Transport Loads
AddSideFramewithWedgePacks---TwoRequired 36,410 16 515 1 1
lb (kg) #1 #2 #3 #4 #5 #6 #7 #8
Add “A” Base Counterweight 14,000 6 350 1
Add “A” Wing Counterweight --- Two Required 13,000 5 897 1 1
Add “B” Wing Counterweight --- Two Required 13,000 5 897 1 1
Add “C” Wing Counterweight --- Two Required 13,000 5 897 1 1
Add “D” Wing Counterweight --- Two Required 13,000 5 897 2
Add “A” Lower Counterweight --- Two Required 24,000 10 886 1 1
Add Hydraulic Third Drum without Rope 2,000 907
Add 30 ft (9.14m) Boom Top Section 4,488 2 036 1
Add 10 ft (3.05m) Extension w/Pins and Pendants 1,151 522
Add 20 ft (6.10m) Extension w/Pins and Pendants 1,862 845 1
Add 30 ft (9.14m) Extension w/Pins and Pendants 2,590 1 175 1 1
Add 40 ft (12.19m) Extension w/Pins and Pendants 3,292 1 493 1
Add 50 ft (15.24m) Extension w/Pins and Pendants 4,149 1 882 1 1
Add 30 ft (9.14m) Basic Jib 2,209 1 002 1
Add 10 ft (3.05m) Jib Extension w/Pins
and Pendants
254 115 1
Add 20 ft (6.10m) Jib Extension w/Pins
and Pendants
439 199 3
Add 5 ft (1.52m) Auxiliary Tip Extension 671 304
Add 15 Ton (13.6mt) Hook Ball (Non---swivel) 1,200 544 1
Add 15 Ton (13.6mt) Hook Ball (Swivel) 1,215 551
Add 175 Ton (158.8mt) Six --- sheave Hook Block 3,000 1 361 1
Remove 10 ft (3.05m) Self---Assembly Section 2,422 1 099
Remove 20 ft (6.10m) Boom Base Section ---4,479 --- 2 032
Remove Main Hoist Rope 1,943 881
Remove Rear Drum Auxiliary Wire Rope ---1,700 --- 771
Remove 50 gal (189L) of Fuel --- 362 --- 164
lb 83,332 43,549 41,759 40,590 28,452 42,292 29,780 43,488
Approximate Total Shipping Weight
kg 37 799 19 753 18 942 18 411 12 905 19 183 13 507 19 726
Notes:
Estimated weights vary by +/--- 2%. Numbers in the load columns (numbers 1 --- 8) represent quantities.
Estimated transport loads assume the load out consist of 280 ft (85.35m) of boom and 100 ft (33.48m) of jib and full counterweight.
Support loads were targeted at 45,000 lb (20 412kg),8.5ft(2.59m) wide, and 48 ft (14.63m) long trailer. This may vary depending on state laws, empty
truck/trailer weights, and style of trailer.
248 HYLAB 5 Link-Belt Cranes