Helvar Lighting Controls 2013/14
Helvar Lighting Controls 2013/14
Helvar Lighting Controls 2013/14
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Lighting</strong> <strong>Controls</strong> <strong>2013</strong>/<strong>14</strong>
<strong>Helvar</strong> has representatives all over the world.<br />
For additional information, please visit www.helvar.com
<strong>Helvar</strong> <strong>Lighting</strong> Systems<br />
Routers<br />
Introduction to <strong>Helvar</strong> lighting systems 4 1<br />
DIGIDIM standalone system 6<br />
DIGIDIM Router system 8<br />
Imagine Router system 10<br />
905, 910 DIGIDIM Router 12 2<br />
920 Imagine Router <strong>14</strong><br />
Load Interfaces<br />
452, 454, 455 DIN-rail dimmers 15 3<br />
472, 474, 478 Driver / Ballast controllers 18<br />
490, 491, 492, 493, 494, 498 Relay units 21<br />
458/-, DIM4, DIM8, UNI8, CTR8, SW8, OPT4 DIGIDIM 458-Series control modules 27<br />
458M/- DIGIDIM 458-Series chassis units 33<br />
HES<strong>14</strong>xxx, HES26xxx Imagine racks 38<br />
HES92020, HES92220, HES98020 Rack modules 40<br />
User Interfaces<br />
416S, 425S Wall mount dimmers 43<br />
1xx / 2xx, 13xx, 23xx Modular Panels, Control Modules and Frames 44 4<br />
18xx EnOcean Switches 47<br />
935, 939 4 & 8 Scene & Modifier Panels 48<br />
Sensors<br />
303 Infrared Remote 50<br />
311 Ceiling PIR Detector 51 5<br />
312 Multisensor 52<br />
313, 3<strong>14</strong> Microwave Detectors 53<br />
315 iDim System Sensor 55<br />
317 High Bay PIR Presence / Absence Detector 56<br />
318 Wall-Mounted PIR Presence / Absence Detector 57<br />
329 DALI External Light Sensor 58<br />
Input Devices<br />
441 Occupancy Detector Interface 60<br />
440, 444, 445, 942 Input Units 61<br />
LCD TouchPanel<br />
6<br />
924x LCD TouchPanel 65<br />
Integration<br />
7<br />
Introduction 66 8<br />
<strong>Helvar</strong> IP Driver 67<br />
uSee User Interface 68<br />
434 EnOcean Gateway 59<br />
503AV AV-Interface 70<br />
510 USB-to-DALI Interface Unit 71<br />
Software<br />
401, 402 DALI Power Supplies 72<br />
Designer Software Suite 74 9<br />
TouchStudio 76<br />
Toolbox Software 78<br />
Controllable LED Drivers and Electronic Ballasts<br />
LED Drivers 80 10<br />
Specifying Information<br />
Electronic ballasts 90<br />
System compatibility 95 11<br />
Installation notes 96<br />
Sensor Selection 97
freedom in lighting<br />
INTRODUCTION<br />
<strong>Helvar</strong> is an international lighting<br />
technologies company specialised<br />
in energy efficient components and<br />
solutions for lighting and lighting<br />
control systems. <strong>Helvar</strong> is a familyowned<br />
company established in 1921.<br />
In addition to luminaire manufacturers, our customer base<br />
comprises electrical and lighting designers and electrical<br />
contractors. Our wide understanding of both components and<br />
lighting systems enables us to design versatile and energy<br />
efficient lighting solutions.<br />
We serve our customers locally in over 40 countries. Our<br />
headquarters are located in Finland, as are our component<br />
product development and manufacturing operations. Our<br />
lighting control competence centre is in England. Worldwide,<br />
our customers are served by offices in eight countries and<br />
our global network of partners.<br />
Our <strong>Controls</strong> Business Line integrates our lighting control<br />
components into viable control applications and systems<br />
services. Our key areas consist of architectural projects<br />
as well as energy efficient lighting control solutions for<br />
commercial applications. <strong>Helvar</strong> is also the leading supplier<br />
of lighting systems for cruise liners.<br />
Our Components Business Line offers LED drivers, magnetic<br />
and electronic ballasts for fluorescent and high-intensity<br />
discharge lamps. <strong>Helvar</strong>’s components are known for<br />
their excellent reliability, energy efficiency and versatility.<br />
Environmental perspectives are integrated to all of our<br />
products through life-cycle and eco-design principles.<br />
Roca Gallery Showroom in London features<br />
<strong>Helvar</strong> lighting control system. It was awarded<br />
the Best Retail Project of the year 2012 in<br />
<strong>Lighting</strong> Design Awards.<br />
4 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
DIGIDIM for DALI<br />
<strong>Helvar</strong>’s DIGIDIM range gives you the products to fulfill any<br />
lighting control requirement. When using the PIR movement<br />
and Constant Light DIGIDIM can achieve maximum energy<br />
saving, prolonged lamp life and reduced cost of ownership.<br />
DIGIDIM KEY FEATURES<br />
• Dimmers and output units to suit any common load type<br />
• Flexible design with chassis based, DIN-rail & wall mount<br />
mounted enclosures<br />
• Standard mains cables for DALI<br />
• Cost effective with easy installation<br />
• Control panels available in a wide range of finishes<br />
• Infrared receiver on all control panels<br />
• Control panels fit into a standard UK and most European<br />
back boxes<br />
• All dimmers are voltage stabilised<br />
• Thermal cut-out protection on all dimmers in the event of<br />
overheating<br />
• User-friendly configuration software<br />
DIGIDIM Router<br />
DIGIDIM 905 / 910 Router system uses standard Ethernet<br />
communication to integrate DALI networks. Its modularity<br />
allows the user to design scalable systems, from a single<br />
office room to a large office building.<br />
Basic functionality is available “out-of-box” without any<br />
programming. Advanced functionality is programmed<br />
through <strong>Helvar</strong>’s Designer software. Each individual router<br />
can operate two DALI subnets containing a total of 128 control<br />
devices and load interfaces. The system enables energy<br />
saving via a combination of presence detection and constant<br />
light functionality. Further automation is achieved through<br />
scheduled time events. OPC server software and Ethernet I/O<br />
commands enable interfacing to third party systems such as<br />
Building Management Systems (BMS).<br />
KEY FEATURES<br />
• 1 or 2 powered DALI subnets (64 / 128 devices)<br />
• Ethernet port for network backbone<br />
• Universal mains supply for global use<br />
• Ethernet I/O commands<br />
• DALI-Emergency support<br />
• Astronomic time clock<br />
Imagine Router<br />
The 920 Imagine Router takes the features that have made<br />
Imagine an industry leader, and seamlessly integrates<br />
them with the latest technologies available within our<br />
DIGIDIM range; has allowed us to go even further, giving our<br />
customers the ability to create projects without compromise.<br />
A seamless blend of proven dimming technology and state of<br />
the art control... <strong>Helvar</strong> is - lighting the way forward.<br />
KEY FEATURES<br />
• 2 x powered DALI subnets (max. 128 devices)<br />
• DMX port (in or out)<br />
• S-DIM port for <strong>Helvar</strong> Imagine devices<br />
• Ethernet port for network backbone<br />
• Override port for S-DIM<br />
• Universal mains supply for global use<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
5
freedom in lighting<br />
DIGIDIM SYSTEM<br />
User Interfaces<br />
DIGIDIM stand-alone systems are typically small<br />
to mid-size applications that operate on a single<br />
DALI subnet, without the use of <strong>Helvar</strong> routers.<br />
User interfaces can be added to allow for manual<br />
scene setting, and multisensors can be used<br />
to increase energy efficiency in the application.<br />
Program and commission a DIGIDIM system<br />
using Toolbox Software.<br />
Modular Control Panels<br />
LCD Touchpanel<br />
STAND-ALONE SYSTEM<br />
BOUNDARIES<br />
• Up to 63 addresses per system<br />
• Up to 250 mA DALI supply per system<br />
• 10 mA per modular button panel<br />
• 10 - 40 mA per sensor<br />
• 2 mA per load interface<br />
• Each system may be configured with up to<br />
16 groups<br />
• Each load may be programmed with up to<br />
15 scenes<br />
See page 95 for additional information on system<br />
specification.<br />
Any latching or momentary switches via input units<br />
444<br />
440<br />
3rd party AV-systems via RS232 interface<br />
503AV<br />
Sensors<br />
312 315 441<br />
(3 rd party sensors)<br />
6<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
Dimmers<br />
455<br />
452<br />
416S / 425S<br />
458/DIM8 + 458M1/8S10<br />
Relay Units<br />
490 494 498<br />
458/SW8 + 458M1/8S10<br />
Ballasts, drivers and controllers<br />
458/CTR8 + 458M1/8S10<br />
472 474<br />
LED<br />
Accessories<br />
USB Interface<br />
System set-up<br />
and diagnosis with<br />
Toolbox-software<br />
(401) / (402)<br />
(510)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
7
freedom in lighting<br />
DIGIDIM ROUTER SYSTEM FOR DALI<br />
For larger applications <strong>Helvar</strong> routers provide an extension to increase the<br />
number of DALI subnets. Each router provides two powered DALI subnets<br />
supporting up to 128 DALI devices per router. Multiple routers can be<br />
networked together using standard Ethernet switches to accommodate for<br />
large network solutions. Ethernet provides a high speed system backbone<br />
through which the entire system can be monitored and controlled.<br />
910 DIGIDIM Router<br />
SINGLE ROUTER<br />
• Supports up to 128 DALI devices<br />
• Each load interface has 128 scenes<br />
• Integrated 250mA DALI power supply for each DALI subnet<br />
• 10/100Mbit/s Ethernet connection using internet protocol (TCP/IP)<br />
• Supports OPC, allowing connection to BMS<br />
• Supports Ethernet I/O communication<br />
• Supports DALI Emergency devices<br />
DALI<br />
DALI<br />
Ethernet<br />
NETWORKED ROUTERS<br />
• Up to 100 routers in a single cluster providing:<br />
• Up to 12.800 DALI devices<br />
• Up to 16.000 DALI groups<br />
• Networks may be further enlarged up to several 100’s of routers,<br />
if set up through multiple clusters.<br />
Relay Units<br />
498<br />
SYSTEM BOUNDARIES<br />
• 10 mA per modular button panel<br />
• 10 - 40 mA per sensor<br />
• 2 mA per load interface<br />
See page 95 for additional information on system specification.<br />
13x<br />
312<br />
EL-iDim<br />
315<br />
8<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
PanelPC with<br />
TouchStudio software<br />
BMS<br />
Tridium Jace<br />
esigner<br />
Software<br />
Ethernet<br />
Dimmers<br />
910 DIGIDIM Router<br />
490<br />
452<br />
455<br />
max. 64<br />
DALI<br />
DALI<br />
Ethernet<br />
905 DIGIDIM Router<br />
EL-iDim<br />
Ballasts and ballast controllers<br />
EL-iDim<br />
LED Driver<br />
474<br />
1-10V<br />
EL-sc<br />
458 Series<br />
DALI<br />
max. 64<br />
441<br />
445<br />
434 18x<br />
Interfaces<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
9
freedom in lighting<br />
IMAGINE ROUTER SYSTEM<br />
The Imagine 920 Router is a modular building<br />
block that allows scalable designs, from small to<br />
920 Imagine Router<br />
large networked solutions. The Imagine Router<br />
can be seamlessly integrated with the DIGIDIM<br />
910 Router to create the most economic solutions<br />
for providing ambience as well as energy saving<br />
functionality.<br />
The Imagine router allows the connection of<br />
input devices (such as control panels, input<br />
units and presence detectors) to a range of load<br />
interfaces. Either single or multiple routers<br />
may be networked to create virtually any kind of<br />
DALI<br />
DALI<br />
S-DIM<br />
DMX (in or out)<br />
Ethernet<br />
system. The system is easily programmed using<br />
the <strong>Helvar</strong> Designer configuration software<br />
LED<br />
running on a Windows based PC.<br />
SINGLE ROUTER<br />
• Supports up to 252 S-DIM channels<br />
• Supports up to 128 DALI devices<br />
• Supports up to 252 non-consecutive channels<br />
DMX (in or out)<br />
• Each load interface has 128 scenes<br />
• Integrated 250 mA DALI power supply for each<br />
DALI subnet<br />
• 10/100Mbit/s Ethernet connection using<br />
internet protocol (TCP/UDP/IP)<br />
• Supports OPC, allowing connection to BMS<br />
• Supports Ethernet I/O communication<br />
• Supports DALI Emergency devices<br />
(458) (HESxx)<br />
1-8 1-26<br />
Up to 252 channels<br />
1-26<br />
1-8<br />
(312) (135) (452)<br />
NETWORKED ROUTERS<br />
• Up to 100 routers in a single cluster providing:<br />
• Up to 25.200 S-DIM channels<br />
• Up to 12.800 DALI devices<br />
• Up to 16.000 DALI groups<br />
LED Drivers<br />
(498)<br />
• Networks may be further enlarged, up to<br />
(EL-ngn)<br />
several 100’s of routers, by use of multiple<br />
clusters.<br />
(474)<br />
max 64<br />
(EL-sc)<br />
10<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
Ethernet<br />
esigner<br />
Software<br />
920 Imagine Router<br />
DALI<br />
SDIM<br />
DMX<br />
Ethernet<br />
910 DIGIDIM Router<br />
Panel PC with <strong>Helvar</strong><br />
TouchStudio software<br />
DALI<br />
905 DIGIDIM Router<br />
Tridium Jace<br />
DALI<br />
BMS<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
11
DIGIDIM Router (905)<br />
The DIGIDIM Router uses standard Ethernet communication<br />
(TCP/IP) to combine multiple DALI networks. The router<br />
features one DALI subnet allowing for a total of 64 DALI<br />
control devices and load interfaces.<br />
Key Features<br />
• One DALI subnet, with 250 mA power supply<br />
• Ethernet port for network backbone<br />
• Supports OPC, allowing connection to BMS<br />
• Supports Ethernet I/O communication<br />
• Supports DALI Emergency devices<br />
Technical Data<br />
Dimensions<br />
Supply voltage: 85-264 VAC, 45 Hz-65 Hz<br />
External MCB protection: 6 A<br />
Stand-by power: N/A (active device)<br />
Power consumption: 13 VA (DALI subnet fully loaded)<br />
Max. total losses: 2.5 – 3.7 W (depending on loading)<br />
DALI power source: 250 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
158 mm<br />
58 mm<br />
45 mm<br />
100 mm<br />
DIN-rail case 9U-wide. Weight 250 g.<br />
Product Order Code: 905<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
905<br />
Digidim Router<br />
RJ45<br />
DA-<br />
DA+<br />
DALI 1<br />
Ethernet<br />
12<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 053 1 02/08/<strong>2013</strong>
DALI 1<br />
Power/Status<br />
Dali 1<br />
Dali 2<br />
Link/Activity<br />
www.helvar.com<br />
DIGIDIM Router (910)<br />
The DIGIDIM Router uses standard Ethernet communication<br />
(TCP/IP) to combine multiple DALI networks. The router<br />
features two DALI subnets allowing for a total of 128 DALI<br />
control devices and load interfaces.<br />
Key Features<br />
• Two DALI subnets, each with 250 mA power supply<br />
• Ethernet port for network backbone<br />
• Supports OPC, allowing connection to BMS<br />
• Supports Ethernet I/O communication<br />
• Supports DALI Emergency devices<br />
Technical Data<br />
Dimensions<br />
Supply voltage: 85-264 VAC, 45 Hz-65 Hz<br />
External MCB protection: 6 A<br />
Stand-by power: N/A (active device)<br />
Power consumption: 23 VA (with both DALI subnets<br />
fully loaded)<br />
Max. total losses: 2.5 – 4.2 W (Depending on loading)<br />
DALI power source: 2 X 250 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Digidim Router<br />
158 mm<br />
DIN-rail case 9U-wide. Weight 265 g.<br />
910<br />
58 mm<br />
45 mm<br />
100 mm<br />
Product Order Code: 910<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
910<br />
Digidim Router<br />
RJ45<br />
Ethernet<br />
DA-<br />
DA+<br />
DALI 1<br />
DALI 2<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 001 1 02/08/<strong>2013</strong> 13
Imagine Router (920)<br />
The 920 Imagine Router uses an Ethernet connection (TCP/IP)<br />
as a network backbone to combine DIGIDIM / DALI, DMX and<br />
S-DIM networks seamlessly together. A PC can be connected<br />
to the system for control, monitoring and logging purposes.<br />
Key Features<br />
• Two DALI subnets with 250 mA power supply<br />
• S-DIM port for <strong>Helvar</strong> Imagine systems<br />
• DMX-port (in or out)<br />
• Override port for S-DIM<br />
• Supports OPC, allowing connection to BMS<br />
• Supports Ethernet I/O communication<br />
• Supports DALI Emergency devices<br />
Technical Data<br />
Dimensions<br />
Supply voltage: 85 - 264 VAC, 45 Hz - 65 Hz<br />
External MCB protection: 6 A<br />
Stand-by power: N/A (active device)<br />
Power consumption: 23 VA (with both DALI subnets<br />
fully loaded)<br />
Max. total losses: 2.5 – 4.3 W (Depending on loading)<br />
DALI power source: 2 x 250 mA (built-in)<br />
Ambient temperature: 0 … 40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
158 mm<br />
DIN-rail case 9U-wide. Weight 260 g<br />
58 mm<br />
45 mm<br />
100 mm<br />
Product Order Code: 920<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
Imagine<br />
920<br />
Imagine Router<br />
RJ45<br />
DALI 1<br />
DA-<br />
DA+<br />
DA-<br />
DA+<br />
Source<br />
DALI 2<br />
OVR<br />
Sink<br />
Ethernet<br />
S-DIM<br />
DMX<br />
<strong>14</strong><br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 002 1 02/08/<strong>2013</strong>
1000 W, Universal Dimmer (452)<br />
Single-channel universal dimmer, suitable for leading<br />
or trailing-edge loads including mains-dimmable LED.<br />
The dimmer is a DIN-rail mounted unit that can control<br />
a maximum load of 1000 W. Out-of-box operation. No<br />
programming required when using DIGIDIM slider, rotary, or<br />
push button panels.<br />
Key Features<br />
• Status LED<br />
• Switch for load selection<br />
• Switch for manual DALI group selection<br />
• Over current, power and temperature protection<br />
Technical Data<br />
Supply voltage: 85 - 264 VAC, 45 Hz - 65 Hz<br />
External MCB protection: 6 A<br />
Minimum load: 5 W<br />
Maximum load: 1000 W<br />
Standby Power: 0.8 W<br />
Max. total losses: 7 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
70 mm 58 mm<br />
DIN-rail case 4U-wide. Weight 180 g<br />
45 mm<br />
90 mm<br />
Product Order Code: 452<br />
Connections<br />
L<br />
N<br />
L<br />
N<br />
Load<br />
max 1000 W (4.35 A)<br />
Group<br />
Selection<br />
Mode Selection<br />
Leading / Trailing edge<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 003 1 02/08/<strong>2013</strong> 15
4 x 500 W, Trailing Edge Dimmer (454)<br />
4 channel trailing edge dimmer suitable for capacitive<br />
and resistive loads, low voltage lamps with electronic<br />
transformers and some mains-dimmable LED. The dimmer<br />
is a DIN-rail mounted unit that can control a maximum load<br />
of 500 W per channel.<br />
Key Features<br />
• LED segment and push buttons for manual configuration<br />
• Capable of handling resistive and capacitive loads<br />
• Wired override input to allow for external triggers<br />
• Voltage and frequency compensation<br />
• Over current and temperature protection included<br />
• Power on to last level<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
External MCB protection: 10 A<br />
Minimum load: 5 W / channel<br />
Maximum load: 2.2 A per channel<br />
(2.2 A × 230 V × 4 = 2 kW)<br />
Standby Power: 2.3 W<br />
Max. total losses: 11 W with maximum load<br />
(resistive)<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
158 mm<br />
58 mm<br />
45 mm<br />
100 mm<br />
DIN-rail case 9U-wide. Weight 280 g<br />
Product Order Code: 454<br />
Connections<br />
L<br />
N<br />
E<br />
Override<br />
L<br />
N<br />
E<br />
DA-<br />
DA+<br />
DALI<br />
OVR<br />
0 V<br />
S-DIM<br />
16<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 044 1 02/08/<strong>2013</strong>
500 W, Thyristor Dimmer (455)<br />
Single-channel thyristor dimmer, suitable for leading edge<br />
loads and some mains-dimmable LED. The dimmer is a DINrail<br />
mounted unit that can control a maximum load of 500 W.<br />
Out-of-box operation. No programming required when using<br />
DIGIDIM slider, rotary, or push button panels.<br />
Key Features<br />
• Stabilised output<br />
• Over current and over temperature protection<br />
• Status LED<br />
Technical Data<br />
Supply voltage: 85 - 264 VAC, 45 - 65 Hz<br />
External MCB protection: 6 A<br />
Minimum load: 25 W<br />
Maximum load: 500 W<br />
Standby Power: 2 W<br />
Max. total losses: 4 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
455<br />
45 mm<br />
90 mm<br />
35 mm 58 mm<br />
DIN-rail case 2U-wide. Weight 110 g<br />
Product Order Code: 455<br />
Connections<br />
L<br />
N<br />
L<br />
N<br />
Load<br />
max 500 W<br />
455<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 004 1 02/08/<strong>2013</strong> 17
1-10 V / DSI Converter (472)<br />
DALI to 1-10 V / DSI ® converter. Switch a maximum of 15<br />
electronic ballasts or LED drivers. The analogue 1-10 V /<br />
digital DSI signal can control up to 50 electronic ballasts.<br />
Key Features<br />
• Switch for manual DALI group selection<br />
• 1-10 V & DSI ® output for 50 ballasts / LED drivers<br />
• Status LED<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
External MCB protection: 10 A<br />
Mains output:<br />
10 A resistive<br />
Load:<br />
15 x ballasts or LED drivers<br />
Standby Power: 1.1 W<br />
Max. total losses: 3 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
45 mm<br />
90 mm<br />
70 mm 58 mm<br />
DIN-rail case 4U-wide. Weight <strong>14</strong>0 g<br />
Product Order Code: 472<br />
Connections<br />
DSI ® is a registered trademark of Tridonic<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
1-10V<br />
C0(-)<br />
C1(+)<br />
DSI<br />
DSI<br />
N<br />
E<br />
L<br />
C0<br />
C1<br />
L<br />
N<br />
E<br />
Group<br />
Selection<br />
Group<br />
Selection<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
18<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 005 1 02/08/<strong>2013</strong>
4-Channel Ballast Controller (474)<br />
4-channel DALI to 0/1-10 V / DSI ® / PWM converter, suitable<br />
for controlling electronic ballasts and LED drivers, fitted with<br />
high inrush relays rated at 16 A per channel, which handle<br />
short-lived high peak currents during switch on of loads. The<br />
outputs can be configured independent of, or paired with relay<br />
channels.<br />
Key Features<br />
• High inrush relays<br />
• Wired override input to allow for external triggers<br />
• LED segment display and push buttons<br />
• Multiple output configurations of either:<br />
• 0 - 10 V source<br />
10 mA<br />
• 1 - 10 V sink<br />
100 mA<br />
• DALI-broadcast- / DSI ® - / PWM source 100 mA<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
External MCB Protection: 6 A (control circuit)<br />
Standby Power: 2.4 W<br />
Max. total losses: 13 W<br />
DALI consumption: 2 mA<br />
Load per channel: 50 x 1-10 V / DALI / DSI ® / PWM ballasts<br />
Max. load per relay: 16 A resistive / incandescent,<br />
10 A HID (cos y = 0.6)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Isolation:<br />
4 kV between every connector<br />
(apart from common C0 ballast<br />
output and S-DIM and Override<br />
connectors)<br />
Product Order Code: 474<br />
Dimensions<br />
158 mm<br />
DIN-rail case 9U-wide. Weight 280 g<br />
58 mm<br />
45 mm<br />
90 mm<br />
DSI ® is a registered trademark of Tridonic<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
BALLAST OUTPUTS<br />
C0 C1 C0 C2 C0 C3 C0 C4<br />
1<br />
2 3 4<br />
S-DIM<br />
Linkto<br />
terminate<br />
S-DIM<br />
OVERRIDE<br />
0V OVR C0 1C2<br />
C C0C0 C3C4<br />
3 1 2 4<br />
OVERRIDE<br />
Ballast Controller<br />
RELAYS<br />
474<br />
(85to264)VAC<br />
DALI<br />
L NE SC DA-DA+<br />
1 2<br />
RELAYOUTPUTS<br />
3 4<br />
1 2 3 4<br />
RELAY OUTPUTS<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 006 1 02/08/<strong>2013</strong> 19
8-Subnet DALI Controller (478)<br />
8-subnet DALI Controller, suitable for controlling ballasts/<br />
drivers when device addressing is not required. This reduces<br />
commissioning and maintenance cost, as failed devices<br />
can be simply replaced. The flexible control inputs support<br />
multiple protocols, by routing an input address/group to its<br />
corresponding subnet output.<br />
Key Features<br />
• Control using DALI Broadcast messages on each subnet<br />
• Integral DALI Power Supply – supports up to 512 DALI<br />
devices (2 mA per driver/ballast)<br />
• Lamp failure reporting per subnet<br />
• Lower commission costs - device addressing/grouping on<br />
subnet not required<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
External MCB Protection: 6 A (control circuit)<br />
Standby Power: N/A (active device)<br />
Max. total losses: 8 W<br />
Control Input:<br />
8 DALI/DMX addresses<br />
(one per subnet (output))<br />
DALI consumption: 2 mA (DALI system input)<br />
Max. load per output: 64 devices (128 mA)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Isolation:<br />
4 kV between DALI output and<br />
S-DIM/Override connectors)<br />
Dimensions<br />
158 mm<br />
DIN-rail case 9U-wide. Weight 250 g<br />
58 mm<br />
45 mm<br />
90 mm<br />
Product Order Code: 478 (available Q4 <strong>2013</strong>)<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
DALI CHANNELS 5-8<br />
SDIM<br />
OVERRIDE<br />
DALI CHANNELS 1-4<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
20<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 059 1 02/08/<strong>2013</strong>
2 Channel Blinds Controller (490)<br />
Two-channel blinds controller, designed for control of blinds<br />
and curtains. Two independent control channels each with<br />
two single pole, volt free contacts for switching up / down or<br />
power / direction motors. Programmable “blind travel time”.<br />
Key Features<br />
• “Break before Make” operation to prevent motor damage<br />
• Isolated mains rated relays, normally open and volt-free<br />
• Status LED<br />
Technical Data<br />
Supply voltage: 220-240 VAC, 50-60 Hz<br />
External MCB protection: 6 A<br />
Maximum load: 550 W per channel<br />
Standby Power: 1.3 W<br />
Max. total losses: 5.6 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
45 mm<br />
90 mm<br />
88 mm 58 mm<br />
Product Order Code: 490<br />
DIN-rail case 5U-wide. Weight 300 g<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
max 550 W<br />
max 550 W<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 007 1 02/08/<strong>2013</strong> 21
1 Channel Relay Unit (491)<br />
Single channel relay unit for, integration in luminaires or<br />
electrical cabinets. Designed to allow control of switched<br />
loads.<br />
Key Features<br />
• Switches up to 3 <strong>Helvar</strong> ballasts or drivers<br />
Technical Data<br />
Supply voltage: 200-265 V, 45-65 Hz<br />
External MCB protection: 2 A<br />
Power consumption: 1.3 W (max)<br />
Relay load:<br />
2 A (resistive),<br />
3 <strong>Helvar</strong> ballasts / drivers<br />
Standby Power: 0.7 W<br />
Max. total losses: 1.3 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…50 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
<strong>14</strong>6 mm<br />
131 mm<br />
21 mm 18.3 mm<br />
Luminaire mount. Weight 35 g.<br />
Product Order Code: 491<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
F<br />
2A<br />
LOAD<br />
max 2 A<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
22<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 008 1 02/08/<strong>2013</strong>
16 A 1-channel Relay Unit (492)<br />
Single channel relay unit, designed to allow control of non-<br />
DALI, non-dimmable loads. The relay is a latching, volt-free<br />
contact, high inrush type, with a contact rating of 16 A. The unit<br />
forms a DALI relay node with a typical current consumption<br />
of 2 mA, and is programmable as a single channel relay by<br />
<strong>Helvar</strong>’s lighting design software, Designer and Toolbox.<br />
Key Features<br />
• High power switching capability (16 A)<br />
• High inrush relay<br />
• Compact size for luminaire, electrical panel or in-line<br />
mounting<br />
• Secure strain relief<br />
Technical Data<br />
DALI consumption: 2 mA<br />
Relay contacts: High inrush, single-pole, singlethrow<br />
(SPST) latching relay<br />
Relay load:<br />
16 A (resistive)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
4.4<br />
110 mm<br />
40 mm 21.2 mm<br />
100 mm<br />
118 mm<br />
White plastic (Polycarbonate). Weight 52 g.<br />
Product Order Code: 492<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
16 A, max.<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 051 1 02/08/<strong>2013</strong> 23
1-Channel Signal Relay Unit (493)<br />
Single channel relay unit, designed to allow interfacing with<br />
other building control and management systems. The relay is<br />
a solid-state, normally open signal relay, with a contact rating<br />
of 60 VAC or VDC, at a maximum of 0.5 A. The unit forms a<br />
DALI relay node with a typical current consumption of 10 mA,<br />
and is programmable as a single channel relay by <strong>Helvar</strong>’s<br />
lighting design software, Designer and Toolbox.<br />
Key Features<br />
• Low power switching capability (0.1 mA to 0.5 A; 60 V)<br />
• Solid state low-current relay<br />
• Compact size for electrical panel or in-line mounting<br />
• Secure strain relief<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Relay contacts: Normally open signal solid state<br />
relay (SSR)<br />
Voltage:<br />
60 VAC or VDC<br />
Maximum load: 0.5 A<br />
Minimum load: 0.1 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
4.4<br />
110 mm<br />
40 mm 21.2 mm<br />
100 mm<br />
118 mm<br />
White plastic (Polycarbonate). Weight 38 g.<br />
Product Order Code: 493<br />
Connections<br />
493 Signal Relay Unit<br />
60 VAC<br />
SSR<br />
max 0.5 A<br />
Note: This unit must not<br />
be used to switch mains<br />
voltages.<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
24<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 052 1 02/08/<strong>2013</strong>
4 Channel Relay Unit (494)<br />
Four channel DALI Relay Unit, designed to allow control of<br />
non-dimmable loads. The relay unit is a DIN-rail mounted<br />
unit that has four individually programmable relays. The<br />
relays are ‘normally open’, volt free and can switch up to 10 A<br />
resistive loads.<br />
Key Features<br />
• Isolated relays, normally open and volt free<br />
• Manual override<br />
• Status LED<br />
Technical Data<br />
Supply voltage: 220-240 VAC, 50-60 Hz<br />
External MCB protection: 6 A (control circuit)<br />
Relay loads:<br />
10 A (resistive) (any phase)<br />
8 A (incandescent)<br />
5 A (inductive)<br />
15 pcs ballasts / drivers<br />
Standby Power: 1.3 W<br />
Max. total losses: 6 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
88 mm 58 mm<br />
DIN-rail case 5U-wide. Weight 300 g.<br />
45 mm<br />
90 mm<br />
Product Order Code: 494<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 009 1 02/08/<strong>2013</strong> 25
8 Channel Relay Unit (498)<br />
Eight-channel Relay Unit, fitted with individually<br />
programmable high-inrush relays to allow control of nondimmable<br />
loads. The relay unit is DIN-rail mounted. The<br />
relays are ‘normally open’, volt-free relays rated at 16 A per<br />
channel. The relay unit has DALI, DMX, and S-DIM ports.<br />
Key Features<br />
• LED display and control buttons<br />
• High-inrush relays<br />
• Override input for external triggers<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45Hz-65 Hz<br />
External MCB protection: 6 A (control circuit)<br />
Relay loads:<br />
16 A (any phase)<br />
Standby Power: 1.1 W<br />
Max. total losses: 7 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
45 mm<br />
90 mm<br />
158 mm<br />
58 mm<br />
DIN-rail case 9U-wide. Weight 400 g.<br />
Product Order Code: 498<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
5 6 7 8<br />
S-DIM<br />
OVERRIDE<br />
1 2 3 4<br />
DA+<br />
DA-<br />
DALI<br />
L<br />
L<br />
DALI<br />
DA+<br />
DA-<br />
26<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 010 1 02/08/<strong>2013</strong>
4-channel Thyristor dimmer module (458/DIM4)<br />
Four channel thyristor dimmer module, for leading-edge<br />
dimming of resistive and inductive loads. The module has 4<br />
channels rated at 10A each, with a total current capacity of<br />
40A. The module has DALI, DMX, and S-DIM interfaces for<br />
integration into DIGIDIM and Imagine systems. The optional<br />
458/OPT4 module allows 4 dimmed channels to be converted<br />
to 4 ballast control channels.<br />
Key Features<br />
• Module plugs into any 458 mechanical chassis<br />
• LCD display screen with navigation keys<br />
• Built-in power supplies for the LCD TouchPanel & DIGIDIM<br />
• Accepts options module 458/OPT4<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
Channels: 4<br />
Minimum load: 25 W / channel<br />
Max load per channel: 10 A<br />
Total supply current: 40 A<br />
DALI supply output: 250 mA (Selectable, Default OFF)<br />
TouchPanel supply: 250 mA<br />
Standby Power: 1.3 W<br />
Max. total losses: 78 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
360 mm<br />
105 mm<br />
170 mm<br />
Product Order Code: 458/DIM4<br />
Weight 5.0 kg<br />
Connections<br />
L<br />
N<br />
E<br />
1<br />
L<br />
N<br />
E<br />
1.<br />
2.<br />
1.<br />
2.<br />
E<br />
4<br />
3.<br />
3.<br />
DA-<br />
DA+<br />
DALI<br />
4.<br />
4.<br />
S-DIM<br />
Bypass<br />
Terminals<br />
458/DIM4<br />
458Mx/- chassis (sold separately)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 011 1 02/08/<strong>2013</strong> 27
8-channel Thyristor dimmer module (458/DIM8)<br />
Eight channel thyristor dimmer module, for leading-edge<br />
dimming of resistive and inductive loads. The module has 8<br />
channels rated at 10 A each, with a total current capacity of<br />
40 A. The module has DALI, DMX, and S-DIM interfaces for<br />
integration into DIGIDIM and Imagine systems. The optional<br />
458/OPT4 module allows 4 dimmed channels to be converted<br />
to 4 ballast control channels.<br />
Key Features<br />
• Module plugs into any 458 mechanical chassis<br />
• LCD display screen with navigation keys<br />
• Built-in power supplies for the LCD TouchPanel & DIGIDIM<br />
• Accepts options module 458/OPT4<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
Channels: 8<br />
Minimum load: 25 W / channel<br />
Maximum load / channel: 10 A<br />
Total supply current: 48 A<br />
DALI supply output: 250 mA (Selectable, Default OFF)<br />
TouchPanel supply: 250 mA<br />
Standby Power: 1.3 W<br />
Max. total losses: 78 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
360 mm<br />
105 mm<br />
170 mm<br />
Product Order Code: 458/DIM8<br />
Weight 5.7 kg<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
1<br />
E<br />
1.<br />
2.<br />
1.<br />
2.<br />
8<br />
3.<br />
3.<br />
DA-<br />
DA+<br />
DALI<br />
S-DIM<br />
4.<br />
5.<br />
6.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
7.<br />
Bypass<br />
Terminals<br />
8.<br />
458/DIM8<br />
458Mx/- chassis (sold separately)<br />
28<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 012 1 02/08/<strong>2013</strong>
8-channel Universal dimmer module (458/UNI8)<br />
Eight channel transistor dimmer module, for leading or<br />
trailing edge dimming of the majority of load types including<br />
Incandescent and dimmable LED’s.<br />
The module has 8 channels that can be individually selected<br />
as leading or trailing edge, rated at 6A each. The module has<br />
a DALI, S-DIM and DMX interface, for integration into DIGIDIM<br />
and Imagine systems.<br />
Key Features<br />
• Module plugs into any 458 mechanical chassis<br />
• LCD display screen with navigation keys<br />
• DALI / S-DIM / DMX<br />
Technical Data<br />
Supply voltage: 85-264 VAC<br />
Supply frequency: 45-65 Hz<br />
Channels:<br />
8 each Selectable leading or<br />
trailing edge<br />
Minimum load: No minimum (active load)<br />
Rating per channel 6 A<br />
Total supply current: 48 A<br />
Standby Power: 1.3 W<br />
Max. total losses: 78 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Storage temperature: -10 °C…+70 °C<br />
Dimensions<br />
360 mm<br />
105 mm<br />
170 mm<br />
Weight 5.7 kg<br />
Product Order Code: 458/UNI8 (available Q4 <strong>2013</strong>)<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
1<br />
E<br />
1.<br />
2.<br />
1.<br />
2.<br />
8<br />
3.<br />
3.<br />
DA-<br />
DA+<br />
DALI<br />
S-DIM<br />
4.<br />
5.<br />
6.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
7.<br />
Bypass<br />
Terminals<br />
8.<br />
458/UNI8<br />
458Mx/- chassis (sold separately)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com REF 23 0581 02/08/<strong>2013</strong> 29
8-channel Ballast control module (458/CTR8)<br />
Eight channel ballast control module, for control of common<br />
ballast loads. Capable of controlling 0-10 V (source), 1-10 V<br />
(sink), DSI ® , DALI- broadcast and PWM loads. Also included<br />
are 8 high inrush relays, rated at 16 A per channel. The<br />
module has DALI, DMX, and S-DIM interfaces for integration<br />
into DIGIDIM and Imagine systems.<br />
Key Features<br />
• Module plugs into any 458 mechanical chassis<br />
• LCD display screen with navigation keys<br />
• DALI / S-DIM / DMX control inputs<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
Channels: 8<br />
0-10 V output: Source 20 mA<br />
1-10 V output: Sink 100 mA (50 ballasts / drivers)<br />
DALI / DSI output: Source 100 mA (50 ballasts / drivers)<br />
PWM +/- output: Source 100 mA (50 ballasts / drivers)<br />
Max load:<br />
16 A max. per switched channel<br />
Total supply current: 63 A<br />
Standby Power: 1.5 W<br />
Max. total losses: 12.4 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Product Order Code: 458/CTR8<br />
Connections<br />
L<br />
N<br />
E<br />
Dimensions<br />
360 mm<br />
105 mm<br />
Weight 2.2 kg<br />
DSI ® is a registered trademark of Tridonic<br />
170 mm<br />
L<br />
N<br />
E<br />
L<br />
1-10V<br />
Ballast<br />
N<br />
C1<br />
C0<br />
1.<br />
2.<br />
3.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
1.<br />
2.<br />
3.<br />
1.<br />
2.<br />
3.<br />
DA-<br />
DA+<br />
DALI<br />
S-DIM OVR<br />
4.<br />
5.<br />
6.<br />
7.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
Bypass<br />
Terminals<br />
8.<br />
458/CTR8<br />
458Mx/- chassis (sold separately)<br />
30<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 013 1 02/08/<strong>2013</strong>
8-channel Switching module (458/SW8)<br />
Eight channel switching module. The module contains 8<br />
high inrush relay channels (normally open), for switching<br />
16 A per channel. The module has DALI, DMX, and S-DIM<br />
interfaces for integration into DIGIDIM and Imagine systems.<br />
The optional 458/OPT4 module provides a further 4 ballast<br />
control channels.<br />
Key Features<br />
• Module plugs into any 458 mechanical chassis<br />
• LCD display screen with navigation keys<br />
• DALI / S-DIM / DMX control inputs<br />
• Accepts options module 458/OPT4<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
Channels: 8<br />
Maximum load: 16 A max. per switched channel<br />
Total supply current: 63 A<br />
Standby Power: 1.5 W<br />
Max. total losses: 7 W<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
360 mm<br />
105 mm<br />
170 mm<br />
Product Order Code: 458/SW8<br />
Weight 2.1 kg<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
1<br />
E<br />
1.<br />
2.<br />
1.<br />
2.<br />
8<br />
3.<br />
3.<br />
DA-<br />
DA+<br />
DALI<br />
S-DIM<br />
4.<br />
5.<br />
6.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
7.<br />
Bypass<br />
Terminals<br />
8.<br />
458/SW8<br />
458Mx/- chassis (sold separately)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 0<strong>14</strong> 1 02/08/<strong>2013</strong> 31
4-channel Option module (458/OPT4)<br />
The options module is a 4-channel ballast control unit for use<br />
inside the dimmer module (458/DIM8 / 458DIM4) or switching<br />
module (458/SW8). It provides 4 channels of ballast control<br />
including 0-10 V, 1-10 V, DSI ® , DALI-broadcast and PWM.<br />
Key Features<br />
• DIN-rail mounted inside the 458 mechanical chassis<br />
• Simply plugs into module via a flat cable<br />
• Powered from the Dimmer or Switching module<br />
Technical Data<br />
Outputs<br />
0-10 V output: Source 2 mA<br />
1-10 V output: Sink 100 mA (50 ballasts / drivers)<br />
DALI / DSI output: 20 mA (10 ballasts / drivers)<br />
PWM output: 20 mA (10 ballasts / drivers)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
70 mm 58 mm<br />
Product Order Code: 458/OPT4<br />
Connections<br />
Weight 100 g<br />
90 mm<br />
DSI ® is a registered trademark of Tridonic<br />
L<br />
N<br />
0V<br />
1-10 V Ballast<br />
0V<br />
1 2 3 4<br />
Chassis<br />
C1(+)<br />
C0(-)<br />
458DIM8<br />
458SW8<br />
Options Module<br />
32<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 015 1 02/08/<strong>2013</strong>
Single Mechanical Chassis (458M1/4S10)<br />
The DIGIDIM 458M1/4S10 is a single mechanical chassis<br />
which can house one DIGIDIM 458/DIM4 control module, to<br />
provide 4 channels of control. The DIGIDIM 458/DIM4 control<br />
modules can be ordered separately.<br />
Key Features<br />
• Vertical wall-mounted and installer-friendly<br />
• By-pass connectors for operation without a module<br />
• S-DIM cable loom for easy module connection included<br />
Technical Data<br />
Mains supply voltage: 264 VAC (max)<br />
Protection:<br />
10 A for loads<br />
6 A MCB for control circuit<br />
(MCB type C 10 kA)<br />
Supply current: 40 A (max)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % (max), non-condensing<br />
IP Rating:<br />
20 (including module when fitted)<br />
Dimensions<br />
363 mm<br />
273 mm<br />
178 mm<br />
Wall-mounted. Weight 5.2 kg<br />
Product Order Code: 458M1/4S10 (MCBs: 4 x 10 A)<br />
Connections<br />
L<br />
N<br />
E<br />
1<br />
L<br />
N<br />
E<br />
E<br />
4<br />
Bypass<br />
Terminals<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 016 1 02/08/<strong>2013</strong> 33
Single Mechanical Chassis (458M1/)<br />
The DIGIDIM 458M1/ is a single mechanical chassis which<br />
can house any one DIGIDIM 458 control module, to provide 8<br />
channels of control.<br />
The chassis is provided with an MCB per channel.<br />
Key Features<br />
• Vertical wall-mounted and installer-friendly<br />
• By-pass connectors for operation without a module<br />
• S-DIM cable loom for easy module connection included<br />
Technical Data<br />
Mains supply voltage: 264 VAC (max)<br />
Protection:<br />
10 A / 6 A MCBs for loads<br />
6 A MCB for control circuit<br />
(MCB type C 10 kA)<br />
Supply current: 63 A (max)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % (max), non-condensing<br />
IP Rating:<br />
20 (including module when fitted)<br />
Dimensions<br />
363 mm<br />
273 mm<br />
178 mm<br />
Product Order Code:<br />
458M1/8S06 (MCBs: 8 x 6 A)<br />
458M1/8S10 (MCBs: 8 x 10 A)<br />
Connections<br />
L<br />
N<br />
E<br />
1.<br />
2.<br />
Wall-mounted. Weight 5.9 kg<br />
E<br />
1<br />
8<br />
L<br />
N<br />
E<br />
3.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
Bypass<br />
Terminals<br />
34<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com REF 23 017 1 02/08/<strong>2013</strong>
Double Mechanical Chassis (458M2/)<br />
The DIGIDIM 458M2/ is a double mechanical chassis which<br />
can house any two DIGIDIM 458 control modules, to provide<br />
up to 16 channels of control.<br />
The chassis is provided with an MCB per channel.<br />
Key Features<br />
• Vertical wall-mounted and installer-friendly<br />
• By-pass connectors for operation without a module<br />
• S-DIM cable loom for easy module connection included<br />
Technical Data<br />
Mains supply voltage: 440 VAC (max)<br />
Protection:<br />
10 A / 6 A MCBs for loads<br />
6 A MCB for control circuit<br />
(MCB type C 10 kA)<br />
Supply current: 63 A max. for each block of MCBs<br />
Single phase use: 125 A max.<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % (max), non-condensing<br />
IP Rating:<br />
20 (including module when fitted)<br />
Dimensions<br />
750 mm<br />
273 mm<br />
Product Order Codes:<br />
458M2/4S104S10 (MCBs: two 4 x 10 A blocks)<br />
458M2/4S108S06 (MCBs: 4 x 10 A and 8 x 6 A blocks)<br />
458M2/4S108S10 (MCBs: 4 x 10 A and 8 x 10 A blocks)<br />
458M2/8S068S06 (MCBs: two 8 x 6 A blocks)<br />
458M2/8S068S10 (MCBs: 8 x 6 A and 8 x 10 A blocks)<br />
458M2/8S108S10 (MCBs: two 8 x 10 A blocks)<br />
Connections<br />
178 mm<br />
Wall-mounted. Weight 12.2 kg<br />
L<br />
N<br />
E<br />
1<br />
(9)<br />
L<br />
N<br />
E<br />
E<br />
L1<br />
1.<br />
8 (16)<br />
2.<br />
3.<br />
4.<br />
5.<br />
6.<br />
7.<br />
L2<br />
8.<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 018 1 02/08/<strong>2013</strong> 35
Triple Mechanical Chassis (458M3/)<br />
The DIGIDIM 458M3/ is a triple mechanical chassis which can<br />
house any three DIGIDIM 458 control modules, to provide up<br />
to 24 channels of control.<br />
The chassis is provided with an MCB per channel.<br />
Key Features<br />
• Vertical wall-mounted and installer-friendly<br />
• By-pass connectors for operation without a module<br />
• S-DIM cable loom for easy module connection included<br />
Technical Data<br />
Mains supply voltage: 440 VAC (max)<br />
Protection:<br />
10 A / 6 A MCBs for loads<br />
6 A MCB for control circuit<br />
(MCB type C 10 kA)<br />
Supply current: 63 A max. for each block of MCBs<br />
Single phase use: 125 A max.<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % (max), non-condensing<br />
IP Rating:<br />
20 (including module when fitted)<br />
Product Order Codes:<br />
458M3/4S104S104S10 (MCBs: three 4 x 10 A blocks)<br />
458M3/4S104S108S06 (MCBs: two 4 x 10 A blocks + 8 x 6 A block)<br />
458M3/4S104S108S10 (MCBs: two 4 x 10 A blocks + 8 x 10 A block)<br />
458M3/4S108S068S06 (MCBs: 4 x 10 A block + two 8 x 6 A blocks)<br />
458M3/4S108S068S10 (MCBs: 4 x 10 A + 8 x 6 A + 8 x 10 A blocks)<br />
458M3/4S108S108S10 (MCBs: 4 x 10 A block + two 8 x 10 A blocks)<br />
458M3/8S068S068S06 (MCBs: three 8 x 6 A blocks)<br />
458M3/8S068S068S10 (MCBs: two 8 x 6 A blocks + 8 x 10 A block)<br />
458M3/8S068S108S10 (MCBs: 8 x 6 A block + two 8 x 10 A blocks)<br />
458M3/8S108S108S10 (MCBs: three 8 x 10 A blocks)<br />
Dimensions<br />
273 mm<br />
1139 mm<br />
178 mm<br />
Wall-mounted. Weight 18.0 kg<br />
Connections<br />
L<br />
N<br />
E<br />
1<br />
(9) (17)<br />
L<br />
N<br />
E<br />
E<br />
L1<br />
1.<br />
8 (16)(24)<br />
2.<br />
3.<br />
4.<br />
L2<br />
5.<br />
6.<br />
7.<br />
8.<br />
L3<br />
36<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 019 1 02/08/<strong>2013</strong>
458-Series Installation Information<br />
For detailed information please refer to 458-series intallation guides available at www.helvar.com/downloads<br />
Remove the cover of the 458 chassis.<br />
Mount the 458 chassis on the wall.<br />
*Note: Minimum clearance of 50 mm required ALL sides<br />
for ventilation and cooling (i)<br />
Make the mains input and channel load connections.<br />
The by-pass terminals provide default out-of-box<br />
operation to the channel loads.<br />
Place the blanking plate on the chassis.<br />
The 458 chassis is now ready and provides basic<br />
switching through its MCB’s.<br />
Remove the cover of the 458 chassis and connect the<br />
458 control module(s).<br />
Plug the by-pass connectors into the control module(s).<br />
Make the DALI or S-DIM data connection.<br />
Place the cover back on the chassis.<br />
Commission the basic settings of the 458 control<br />
module(s).<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 020 1 02/08/<strong>2013</strong> 37
Imagine <strong>14</strong> Channel Rack (HES<strong>14</strong>xxx)<br />
Imagine Dimmer Rack for 7 rack-mounted modules. The<br />
modules are installed in a stacker unit where they are tilted at<br />
an angle of 45 degrees. This greatly reduces the overall depth<br />
of the cabinet and ensures that the modules are properly<br />
cooled.<br />
Key Features<br />
• All internal connections are pre-wired<br />
• Dual MCB protection for each input circuit<br />
• Screwless terminals<br />
• Forced cooling available<br />
Technical Data<br />
Supply type:<br />
3-phase<br />
Supply voltage: 180-260 VAC, 45-65 Hz<br />
(90-130 VAC to order)<br />
Total input current: <strong>14</strong>0 A - 280 A<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
734 mm<br />
550 mm<br />
220 mm<br />
Product Order Code:<br />
HES<strong>14</strong>100 Fully Wired <strong>14</strong> x 10A Rack (no modules)<br />
HES<strong>14</strong>300 Fully Wired <strong>14</strong> x 20A Rack (no modules)<br />
Wall-mounted<br />
Connections<br />
1-6<br />
7-<strong>14</strong><br />
Load Outputs<br />
1 <strong>14</strong><br />
38<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 021 1 02/08/<strong>2013</strong>
Imagine 26 Channel Rack (HES26xxx)<br />
Imagine Dimmer Rack for 13 rack mounted modules. The<br />
modules are installed in a stacker unit where they are tilted at<br />
an angle of 45 degrees. This greatly reduces the overall depth<br />
of the cabinet and ensures that the modules are properly<br />
cooled.<br />
Key Features<br />
• All internal connections are pre-wired<br />
• Dual MCB protection for each input circuit<br />
• Screwless terminals<br />
• Forced cooling available<br />
Technical Data<br />
Supply type:<br />
3-phase<br />
Supply voltage: 180-260 VAC, 45-65 Hz<br />
(90-130 VAC to order)<br />
Total input current: 260 A - 520 A<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
1<strong>14</strong>1 mm<br />
550 mm<br />
Product Order Code:<br />
HES26100 Fully Wired 26 x 10A Rack (no modules)<br />
HES26300 Fully Wired 26 x 20A Rack (no modules)<br />
Wall-mounted<br />
220 mm<br />
Connections<br />
1-13<br />
<strong>14</strong>-26<br />
Load Outputs<br />
1 26<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 022 1 02/08/<strong>2013</strong> 39
2 Channel Thyristor Dimmer (HES92020)<br />
Dual-channel thyristor dimmer (leading edge), suitable for<br />
use with most loads, including tungsten, tungsten-halogen,<br />
wire-wound (inductive) fed low-voltage tungsten or neon<br />
lighting loads. Designed as an exchangeable module for<br />
fitting into the Imagine Rack System.<br />
Key Features<br />
• Status display<br />
• Dimmer status feedback<br />
• Override and analogue inputs<br />
• Selectable dimmer curves<br />
• S-DIM (2 channels)<br />
Technical Data<br />
Supply voltage:<br />
Standby Power:<br />
Power consumption:<br />
Minumum load:<br />
Maximum load:<br />
180-260 VAC, 45-65 Hz<br />
(90-130 VAC to order)<br />
2.1 W<br />
3 W at zero output<br />
35 W both channels loaded to 10 A<br />
100 W both channels loaded to 20 A<br />
40 W<br />
10 A convection cooled, per channel<br />
20 A forced ventilation, per channel<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
219 mm<br />
211 mm<br />
44 mm<br />
Installed in to Imagine rack<br />
Product Order Code: HES92020<br />
Connections<br />
CHB<br />
CHA<br />
Optional Analogue <strong>Controls</strong><br />
HESxx<br />
LA<br />
LB<br />
LA<br />
LB<br />
40<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 023 1 02/08/<strong>2013</strong>
2 Channel Transistor Dimmer (HES92220)<br />
Dual-channel transistor dimmer (trailing edge), suitable<br />
for use with tungsten, tungsten-halogen and electronic<br />
transformer fed low-voltage tungsten loads. Designed as<br />
an exchangeable module for fitting into the Imagine Rack<br />
System.<br />
Key Features<br />
• Status display<br />
• Dimmer status feedback<br />
• Override and analogue inputs<br />
• Selectable dimmer curves<br />
• S-DIM (2 channels)<br />
Technical Data<br />
Supply voltage:<br />
Standby Power:<br />
Power consumption:<br />
Minumum load:<br />
Maximum load:<br />
180-260 VAC, 45-65 Hz<br />
(90-130 VAC to order)<br />
3.8 W<br />
6 W at zero output<br />
40 W both channels loaded to 6 A<br />
130 W both channels loaded to 20 A<br />
40 W<br />
6 A convection cooled, per channel<br />
20 A forced ventilation, per channel<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
219 mm<br />
211 mm<br />
44 mm<br />
Installed in to Imagine rack<br />
Product Order Code: HES92220<br />
Connections<br />
CHB<br />
CHA<br />
Optional Analogue <strong>Controls</strong><br />
HESxx<br />
LA<br />
LB<br />
LA<br />
LB<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 024 1 02/08/<strong>2013</strong> 41
2 Channel Ballast Controller (HES98020)<br />
Dual-channel ballast controller suitable for electronic<br />
ballasts, DSI ballasts or other analogue control equipment.<br />
Designed as an exchangeable module for fitting into the<br />
Imagine Rack System.<br />
Key Features<br />
• Status display<br />
• Controller status feedback<br />
• Override input<br />
• Output type selection: 0-10 V, 1-10 V, DSI ® , PWM<br />
• S-DIM (2 channels)<br />
Technical Data<br />
Supply voltage: 180-260 VAC, 45-65 Hz<br />
(90-130 VAC to order)<br />
Standby Power: 8.4 W<br />
Max. total losses: 15 W<br />
Control output: 100 mA drive capable of driving<br />
up to 50 ballasts<br />
Output relay rating: Single pole 20 A resistive load<br />
(Max 15 EL-sc Ballasts)<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
219 mm<br />
211 mm<br />
44 mm<br />
Installed into Imagine rack<br />
Product Order Code: HES98020<br />
DSI ® is a registered trademark of Tridonic<br />
Connections<br />
CHB<br />
1-10 V<br />
Ballast<br />
1-10 V<br />
Ballast<br />
CHA<br />
Analogue Output<br />
0V<br />
CH2<br />
(C1)<br />
CH1<br />
(C1)<br />
HESxx<br />
LA<br />
LB<br />
LA<br />
LB<br />
42<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 025 1 02/08/<strong>2013</strong>
16 A Dimmer (416S) / 25 A Dimmer (425S)<br />
The DIGIDIM 416S (16 Amp) and 425S (25 Amp) are<br />
wall-mounted single-channel leading edge (thyristor)<br />
dimmers. Both units also include a 16 A relay circuit.<br />
Controllable by S-DIM, DMX, and Analogue, and fully<br />
DALI-compatible for use as Load Interface Units in a DIGIDIM<br />
lighting control system, the 416S and 425S can also function<br />
as stand-alone dimmers. They can be connected to mains<br />
voltage lamps directly, or to low voltage lamps via a wirewound<br />
transformer, and have a selectable, integral DALI<br />
power supply.<br />
Key Features<br />
• Stabilised output<br />
• Selectable, integral, 83 mA DALI power supply<br />
• Over-temperature protection<br />
Technical Data<br />
Supply voltage: 220-240 VAC, 50-60 Hz<br />
External MCB protection: 16 A (416S) / 25 A (425S)<br />
Minimum load: 40W (416S), 100W (425S)<br />
Maximum load: 16 A (416S) / 25 A (425S)<br />
Standby Power: 7.5 W (416S)<br />
7.5 W (425S)<br />
Max. total losses: 39 W (416S)<br />
67 W (425S)<br />
DALI supply output: 250 mA (Selectable, Default ON)<br />
DALI consumption: 2 mA<br />
Ambient temperature: 0...35°C<br />
Relative humidity: 90% max, non-condensing<br />
IP rating: 30<br />
Product Order Codes:<br />
Connections<br />
16 A Dimmer: 416S<br />
25 A Dimmer: 425S<br />
Analogue<br />
(0-10 V;<br />
1-10 V)<br />
S-DIM; Override<br />
DMX<br />
DALI<br />
(powered:<br />
83 mA)<br />
Dimensions<br />
104 mm<br />
DALI<br />
(non-powered)<br />
276 mm<br />
187 mm<br />
Wall mounted. Weight 416S: 2 kg; 425S: 2.6 kg<br />
185 mm<br />
DA- SC DA+ DA SC DA<br />
L N N SWL DIM<br />
max 16 A (416) /<br />
25 A (425)<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 026 1 02/08/<strong>2013</strong> 43
Modular Panels (1xx/2xx)<br />
Modular control panels are a fully DALI-compatible range of<br />
user interfaces that, allow basic control of the system. The<br />
range includes push button, rotary and slider controls in a<br />
range of panel finishes.<br />
Key Features<br />
• Indicator LED and an infrared receiver<br />
• Out of box operation<br />
• Designed to fit both DIN and UK standard back boxes<br />
• Double gang version can take up to 3 independent module<br />
types<br />
• DIGIDIM / DALI<br />
(200) Satin White Plastic (201) Polished Brass<br />
(202) Brushed Stainless Steel (203) Stainless Steel<br />
with Grey Insert<br />
Technical Data<br />
DALI supply input: 13 - 22.5 V<br />
DALI consumption: 10 mA<br />
Ambient temperature: 10 °C …35°C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Isolation from DALI: 4 kV<br />
Dimensions<br />
88 mm (86 mm)<br />
160 mm (160 mm)<br />
88 mm (86 mm)<br />
Module Finish Module 1 Module 2 Module 3 Finish<br />
Example: 100 200 126 150 121 200<br />
100200 126150121200<br />
( ) = Metal Finish Panel Dimensions<br />
Product Order Code: Refer to the pictures above<br />
Connections<br />
Standard Modules<br />
Rotary (100) 1 x Slider (110) 2 x Slider (111) On/Off (121)<br />
DA+ SC<br />
DA-<br />
Up/Down (122) 4 Scene (124)<br />
+ Off<br />
4 Scene, (125)<br />
Off + Up/Down<br />
7 Scene<br />
+ Off<br />
(126)<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
Blank (150) IR Module(170)<br />
44<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 027 1 02/08/<strong>2013</strong>
Control Modules (13xx)<br />
The 13xx panel modules are a customisable DALI compatible<br />
range of user interfaces that allow control of the system.<br />
Each module is fitted with indicator LEDs and an infrared<br />
receiver that gives the option of remote operation using<br />
DIGIDIM hand held remote controls.<br />
Key Features<br />
• Choice of black (B) or white (W) modules<br />
• Indicator LED and an infrared receiver<br />
• Out of box operation<br />
• DIGIDIM / DALI<br />
• Customisable button layout and frames available upon<br />
request<br />
Technical Data<br />
DALI supply input: 13 - 22.5 V<br />
DALI consumption: 10 mA<br />
Ambient temperature: 10 °C …35 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Isolation from DALI: 4 kV<br />
Dimensions<br />
48.40 mm<br />
35.40 mm 31.80 mm<br />
Weight 41 g<br />
Product Order Code: Please refer pictures below<br />
Connections<br />
Modules<br />
(131W)<br />
(132W)<br />
(134W)<br />
(135W)<br />
DA+ SC<br />
DA-<br />
(136W)<br />
(137W)<br />
(131B)<br />
(132B)<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
(134B)<br />
(135B)<br />
(136B)<br />
(137B)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 045 1 02/08/<strong>2013</strong> 45
Frames (23xx)<br />
Key Features<br />
• Designed to fit both DIN and UK standard back boxes<br />
• Double gang version can take up to 3 modules<br />
Frames<br />
The frame kits are available in range of finishes, which are<br />
shown below:<br />
Dimensions<br />
86 mm (<strong>14</strong>6 mm)<br />
88 mm (160 mm)<br />
Frame Finish Single gang code Double gang code<br />
White Plastic 230S 230D<br />
Polished Brass 231S 231D<br />
Stainless Steel 232S 232D<br />
White Metal 234S 234D<br />
Black plastic 235S 235D<br />
86 mm<br />
231x, 232x, 234x 230x, 235x<br />
Note: Frames are delivered complete with corresponding<br />
( ) = Double gang dimensions<br />
chassis. Weight 100 g (<strong>14</strong>4 g)<br />
88 mm<br />
Product Order Code: Refer to the table above<br />
Finishes<br />
(230) (231)<br />
(232) (234)<br />
(235)<br />
Frame and control module examples<br />
Single Frame<br />
Double Frame<br />
46<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 046 1 02/08/<strong>2013</strong>
EnOcean Switches (18xx)<br />
The 18xx wireless switch modules are an EnOceancompatible<br />
range of user interfaces that allow control of the<br />
system. Designed to work with the <strong>Helvar</strong> EnOcean Gateway,<br />
each switch is fully programmable in Designer or Toolbox<br />
Key Features<br />
• Choice of single or dual rocker, and black (B) or white (W)<br />
modules<br />
• Self powered batteryless and wireless<br />
• EnOcean RF technology<br />
• Designed to fit UK standard backboxes or surface mounted<br />
• Stainless Steel frame<br />
Technical Data<br />
Operating frequency: 868 MHz ISM band (Europe)<br />
Ambient temperature: -25 °C…+65 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Operating Range: 30 m (unobstructed space)<br />
Dimensions<br />
86 mm<br />
86 mm<br />
15 mm<br />
Product Order Code: (Available Q4/<strong>2013</strong>)<br />
Dual Rocker Switch: 182B (black)<br />
182W (white)<br />
Single Rocker Switch: 181B (black)<br />
181W (white)<br />
Weight 150 g<br />
Operation<br />
DALI<br />
434 EnOcean Gateway<br />
182x<br />
Dual-rocker<br />
switch<br />
0<br />
Up to 30 meters<br />
181x<br />
Single-rocker<br />
switch<br />
0<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 061 1 02/08/<strong>2013</strong> 47
4 Scene & Modifier Panel (935)<br />
The 4 Scene and Modifier Panel is a DALI compatible user<br />
interface. The panel is fitted with rear illuminated scene<br />
selection buttons and scene identification labels, providing a<br />
visual indication of the selected scene.<br />
Key Features<br />
• Out of box operation<br />
• Fits standard single back boxes<br />
• The panel is fitted with an infrared receiver<br />
Technical Data<br />
DALI consumption: 20 mA<br />
Label illumination supply: 24 V optional, externally supplied<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP Rating: 30<br />
Dimensions<br />
1<strong>14</strong> mm<br />
89 mm<br />
19 mm<br />
Wall-mounted. Weight 100 g<br />
Product Order Code: 935<br />
Connections<br />
24V(-)<br />
DA-<br />
DA-<br />
SC<br />
DA+<br />
DA+<br />
24V(+)<br />
48<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 028 1 02/08/<strong>2013</strong>
8 Scene & Modifier Panel (939)<br />
The 8 Scene and Modifier Panel is a DALI compatible user<br />
interface. The panel is fitted with rear illuminated scene<br />
selection buttons and scene identification labels, providing a<br />
visual indication of the selected scene.<br />
Key Features<br />
• Out of box operation<br />
• Fits standard single single or double back boxes<br />
• The panel is fitted with an infrared receiver<br />
Technical Data<br />
DALI consumption: 22 mA<br />
Label illumination supply: 24 V optional, externally supplied<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP Rating: 30<br />
Dimensions<br />
1<strong>14</strong> mm<br />
189 mm<br />
19 mm<br />
Wall-mounted. Weight 245 g<br />
Product Order Code: 939<br />
Connections<br />
24V(-)<br />
DA-<br />
DA-<br />
SC<br />
DA+<br />
DA+<br />
24V(+)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 029 1 02/08/<strong>2013</strong> 49
Infrared Remote (303)<br />
The Infrared Remote is a handheld unit that can be used to<br />
control basic system functions such as on/off, raising and<br />
lowering the general light level and the selection of four<br />
scenes.<br />
Key Features<br />
• On / Off button<br />
• Raise / Lower buttons<br />
• Four scene recall buttons<br />
• For use with:<br />
• Modular panels<br />
• 935 / 939 panels<br />
• LCD TouchPanel<br />
• 3xx sensors<br />
Technical Data<br />
Power supply:<br />
2 x IEC, LR03/AAA 1.5 V Battery<br />
Operating range: 5 m<br />
Operating frequency: 36 kHz<br />
Ambient temperature: 0 °C …40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
119 mm<br />
Product Order Code: 303<br />
57 mm<br />
28 mm deep<br />
Non-flammable polycarbonate, halogen free. Weight 50 g<br />
Features<br />
A. LED Indicator (flashes as each<br />
message is transmitted)<br />
B. Scene Recall/Configuration<br />
C. On/Off/Shift<br />
D. Modifier Keys<br />
E. Transmitter<br />
F. Battery Cover<br />
G. Rotary Switch (Normal position 0)<br />
A<br />
B<br />
E<br />
F<br />
C<br />
D<br />
G<br />
50<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 030 1 02/08/<strong>2013</strong>
Ceiling PIR Detector (311)<br />
The 311 Ceiling PIR Detector is a compact, flush-mounted<br />
ceiling unit which provides energy-saving functions when<br />
used in a DALI system.<br />
The unit contains these sensors:<br />
• Passive infra-red detector (PIR)<br />
• Infra-red receiver for 303 handset<br />
Key Features<br />
• The PIR Sensor detects movement within the unit’s detection<br />
range allowing load control in response to changes in room<br />
occupancy<br />
• Status LEDs<br />
• Surface-mount box available<br />
Technical Data<br />
DALI consumption: 15 mA<br />
Ambient temperature: 0 …35 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
Storage temperature: -10 °C … 70 °C<br />
IP rating: 30<br />
PIR detection area: 7 m, 2.8 m mounting height<br />
Dimensions<br />
3.7 mm<br />
3.6 mm<br />
67 mm<br />
Motion detection area<br />
58 mm<br />
2.8 m<br />
61.2 mm ø 76 mm<br />
7 m<br />
Product Order Code: 311<br />
Hole diameter: ø 64 mm<br />
Satin white plastic. Weight 58 g<br />
Connections<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA+<br />
DA-<br />
DA-<br />
DALI<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 047 1 02/08/<strong>2013</strong> 51
Multisensor (312)<br />
The Multisensor is a compact unit containing the necessary<br />
sensors to provide energy saving functions. It has a constant<br />
light sensor, a passive infra-red detector (PIR) and an infrared<br />
receiver for the Infrared Remote. The Multisensor is<br />
designed to push fit into a ceiling or luminaire housing.<br />
Key Features<br />
• Programmable constant light<br />
• Presence detection<br />
• Control using the 303 Infrared Remote<br />
• Switch-Control input<br />
• Surface-mount box available<br />
• DIGIDIM DALI<br />
Technical Data<br />
DALI consumption: 15 mA<br />
Ambient temperature: 0 …50 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
IP rating: 30<br />
Constant light reception area PIR detection area:<br />
(40° restrictor also provided):<br />
3.0 m<br />
3.0m<br />
Dimensions<br />
26.4 mm<br />
65 mm<br />
51.4 mm<br />
100 O<br />
85 O<br />
Satin white plastic. Weight 48 / 54 g<br />
0.8m<br />
0.5m<br />
5.2 m<br />
7.1 m<br />
Product Order Code: 312<br />
4.5m<br />
Connections<br />
DA+ SC<br />
DA-<br />
Optional Switch-Control<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
52<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 031 1 02/08/<strong>2013</strong>
Low Profile Microwave Detector (313)<br />
The 313 Low Profile Microwave Detector provides occupancy<br />
detection for the automatic control of DALI lighting loads.<br />
Key Features<br />
• Microwave sensor detects movement within the detection<br />
range allowing load control in response to changes in room<br />
occupancy<br />
• Infra-red receiver for 303 handset<br />
• Surface-mount box available<br />
• Status LEDs<br />
Technical Data<br />
DALI consumption: 20 mA<br />
Ambient temperature: 0 …35°C<br />
Relative humidity: 90 % maximum, non-condensing<br />
Storage temperature: -10 °C … 70 °C<br />
IP rating: 30<br />
Detection area: 12 - 16 m, 2.8 m mounting height<br />
2.8 m<br />
* with sensitivity set to maximum<br />
Dimensions<br />
3.7 mm<br />
3.6 mm<br />
67 mm<br />
58 mm<br />
12 - 16 m<br />
Product Order Code: 313<br />
61.2 mm<br />
Hole diameter: ø 64 mm<br />
Satin white plastic. Weight 90 g<br />
ø 76 mm<br />
Connections<br />
+ -<br />
Optional input for external power supply 12 V to 24 V.<br />
<strong>Helvar</strong> power supply recommended.<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA+<br />
DA-<br />
DA-<br />
DALI<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com REF 23 048 1 02/08/<strong>2013</strong> 53
Tilting Microwave Detector (3<strong>14</strong>)<br />
The 3<strong>14</strong> Tilting Microwave Detector provides occupancy<br />
detection for the automatic control of DALI lighting loads. The<br />
3<strong>14</strong> detects movement using its highly sensitive microwave<br />
detector. It works by emitting low-power microwave signals<br />
and measuring the reflections as the signals bounce off<br />
moving objects.<br />
Key Features<br />
• Microwave sensor detects movement within the detection<br />
range allowing load control in response to changes in room<br />
occupancy<br />
• Adjustable sensitivity<br />
• Infra-red receiver for 303 handset<br />
• Surface-mount box available<br />
• Status LEDs<br />
Technical Data<br />
DALI consumption: 40 mA<br />
Ambient temperature: 0 …35 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
IP rating: 30<br />
Detection area: ceiling Detection area: wall mount<br />
Dimensions<br />
3.5 mm 3.5 mm<br />
78 mm<br />
70 mm<br />
2.8 m<br />
2.8 m<br />
85 mm 92 mm<br />
Hole diameter: ø 74 mm<br />
Satin white plastic. Weight 124 g<br />
6 m<br />
6 m<br />
30 m<br />
22 m<br />
Product Order Code: 3<strong>14</strong>, 3<strong>14</strong>/R2, 3<strong>14</strong>/R3, 3<strong>14</strong>/R4, 3<strong>14</strong>/R5 (depending on the region)<br />
Connections<br />
Microwave Operating Frequency<br />
+ -<br />
Optional input for external<br />
power supply 12 V to 24 V.<br />
<strong>Helvar</strong> power supply<br />
recommended.<br />
Model Frequency Territories<br />
3<strong>14</strong> 10.687 GHz<br />
UK, China, Hong Kong, India, Malaysia,<br />
Middle East, Singapore<br />
3<strong>14</strong>/R2 10.525 GHz<br />
Australia, and Europe, except for:<br />
UK, France, Portugal, Germany,<br />
Switzerland, Austria, Slovak Republic,<br />
Republic of Ireland<br />
3<strong>14</strong>/R3 9.900 GHz France, Portugal, Switzerland<br />
3<strong>14</strong>/R4 9.350 GHz Austria, Germany, Slovak Republic<br />
3<strong>14</strong>/R5 10.41 GHz Republic of Ireland<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA+<br />
DA-<br />
DA-<br />
DALI<br />
54<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 049 1 02/08/<strong>2013</strong>
i Dim<br />
iDim System Sensor (315)<br />
The iDim Sense is a luminaire based DALI sensor. It combines<br />
a movement detector (PIR), remote control receiver (IR) and<br />
photocell (CL) in one enclosure and a manual mode selector<br />
which allows the user to easily select one of the 6 out-of-box<br />
application modes. It also benefits from additional system<br />
functionality when used with DIGIDIM Toolbox or Designer<br />
and 910/920 Routers.<br />
Key Features<br />
• Easy to select application modes<br />
• Clip-on fascia in different colours<br />
• Clip-on PIR Restrictor<br />
• Mode selector with LED feedback<br />
• Network compatible with DIGIDIM Toolbox and <strong>Helvar</strong><br />
905/910/920 Router systems<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Ambient temperature: 10 …50 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
Dimensions<br />
20 mm<br />
iDim Sense without Fascia<br />
12.3 mm<br />
7.3<br />
Constant light<br />
reception area:<br />
PIR detection area:<br />
(Clip-on PIR Restrictor exluded)<br />
55 mm<br />
25 mm<br />
3.0 m<br />
3.0 m<br />
iDim Sense with Fascia<br />
60 °<br />
85 °<br />
58 mm<br />
28.5 mm<br />
0.8 m<br />
2.5 m<br />
3.5 m<br />
Product Order Code: 315<br />
0.5 m<br />
4.5 m<br />
21.4 mm<br />
Luminaire mounted. Weight 15 g<br />
Connections<br />
Only one wire<br />
per terminal<br />
DA-<br />
DA+<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 032 1 02/08/<strong>2013</strong> 55
High Bay PIR Presence / Absence Detector (317)<br />
The 317 High Bay PIR Presence / Absence Detector, as part of<br />
a <strong>Helvar</strong> lighting control system, provides automatic control<br />
of lighting loads in buildings and interior spaces with high<br />
ceilings.<br />
Key Features<br />
• <strong>Controls</strong> lighting loads based on presence / absence<br />
detection<br />
• Clip-on masks to customise the detection area<br />
• Simple connection and integration into a <strong>Helvar</strong> DALI<br />
control network<br />
• Programmable in Designer and DIGIDIM Toolbox<br />
• Sensitivity can be adjusted<br />
• Infra-red receiver for 303 handset<br />
• Surface-mount box available<br />
Technical Data<br />
DALI consumption: 20 mA<br />
Ambient temperature: 10 …35 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
IP rating:<br />
IP 40 without gasket<br />
PIR detection area:<br />
IP 44 with gasket<br />
Dimensions<br />
88 mm 49 mm 63 mm<br />
15 m<br />
6 m<br />
10 m<br />
16 m<br />
26 m<br />
Flame retardant ABS and PC/ABS. Weight 120 g<br />
Protective<br />
cover<br />
Product Order Code: 317<br />
40 m<br />
Connections<br />
Detection area masking<br />
Two clip-on shielding masks are supplied with the 317. Each<br />
can cover half of the sensor lens. Lateral or radial strips can<br />
be cut out of the masks to customise the detection area.<br />
Narrow areas<br />
Aisles / corridors<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA+<br />
DA-<br />
DA-<br />
DALI<br />
56<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 054 1 02/08/<strong>2013</strong>
Wall-Mounted PIR Presence / Absence Detector (318)<br />
The 318 Wall Mounted PIR Presence / Absence Detector, used<br />
in conjunction with a <strong>Helvar</strong> lighting control system, provides<br />
automatic control of lighting loads in individual room spaces.<br />
The 318 is in the format of a standard <strong>Helvar</strong> panel module.<br />
Key Features<br />
• <strong>Controls</strong> lighting loads based on presence/absence<br />
detection<br />
• Manual Override/Dimming button built in<br />
• For wall mounting using <strong>Helvar</strong> panel surrounds<br />
• Available in black or white finish to match the <strong>Helvar</strong> button<br />
panel range<br />
• Simple connection and integration into a <strong>Helvar</strong> DALI<br />
control network<br />
• Programmable in Designer and DIGIDIM Toolbox<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Ambient temperature: 0 °C …40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Isolation:<br />
Double isolation from DALI network<br />
IP rating: 30<br />
Dimensions<br />
35.40 mm 31.80 mm<br />
PIR detection area:<br />
48.40 mm<br />
85 °<br />
Weight 35 g<br />
5 m<br />
Product Order Code: 318W or 318B<br />
Connections<br />
Finishes<br />
White finish (318W)<br />
Black finish (318B)<br />
DA+ SC<br />
DA-<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 055 1 02/08/<strong>2013</strong> 57
DALI External Light Sensor (329)<br />
The 329 DALI External Light Sensor, when used in conjunction<br />
with a <strong>Helvar</strong> <strong>Lighting</strong> Router based controls system, can<br />
provide energy savings by adjusting light levels based on<br />
the available daylight. The 329 is for mounting outdoors. The<br />
unit head assembly is waterproof when correctly installed<br />
and mounted vertically, and can tolerate a wide range of<br />
operating temperatures and conditions.<br />
Key Features<br />
• Open loop light control<br />
• Light range of 1 - 100,000 LUX<br />
• Simple mounting<br />
• Easy connection to <strong>Helvar</strong> router system<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Ambient temperature: -35…75 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
IP rating: IP 65<br />
Light sensing angle: When mounted vertically:<br />
85° from vertical;<br />
Horizontal plane: 360°<br />
Working light range: 1 - 100,000 Lux<br />
Light level reading output: 0 - 200<br />
Dimensions<br />
93 mm<br />
82 mm<br />
68 mm<br />
<strong>14</strong>8 mm<br />
Weight 250 g<br />
87 mm<br />
29 mm<br />
Product Order Code: 329<br />
Connections<br />
Terminal Function<br />
N (DA+) DALI +<br />
L0 (DA -) DALI -<br />
L Do not connect<br />
L<br />
L0<br />
N<br />
DA-<br />
DA+<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
DALI<br />
58<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF23 056 1 02/08/<strong>2013</strong>
EnOcean Gateway (434)<br />
The 434 EnOcean Gateway lets you connect wireless and<br />
battery-less EnOcean controls to a <strong>Helvar</strong> DALI lighting<br />
network. The 434 is for mounting on the ceiling or on walls,<br />
and requires only a single electrical connection to a DALI<br />
network.<br />
Key Features<br />
• Integrate wireless, battery-less switches into DALI network<br />
• Simple installation<br />
• Gateway is powered by the DALI network<br />
• Up to 20 switches can be integrated via one gateway<br />
Technical Data<br />
DALI consumption: 20 mA<br />
Ambient temperature: 0…50 °C<br />
Relative humidity: 90 % maximum, non-condensing<br />
IP rating: IP 30<br />
Operating frequency: 868 MHz ISM band (Europe)<br />
Range (switches): Typical EnOcean Switches: 35 m<br />
(unobstructed space)<br />
Maximum number of<br />
Switch units per gateway: 20<br />
Dimensions<br />
Ø 110 mm<br />
73 mm<br />
16<br />
7<br />
58 mm<br />
Weight 75 g<br />
Product Order Code: 434<br />
System overview<br />
DALI ballasts and LED drivers<br />
ToolBox<br />
182W<br />
Dual-rocker<br />
switch<br />
434<br />
510<br />
0<br />
DALI ballasts and LED drivers<br />
DALI<br />
esigner<br />
182W<br />
Dual-rocker<br />
switch<br />
Ethernet<br />
0<br />
434<br />
Ethernet switch<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 057 1 02/08/<strong>2013</strong> 59
Occupancy Detector Interface (441)<br />
The 441 Occupancy Detector Interface allows connection of<br />
a customer specified occupancy sensor to a DIGIDIM-DALI<br />
system. The input accepts a volt free normally closed contact.<br />
The pre-wired encapsulated circuit board is intended for<br />
mounting inside the wiring space of the sensor.<br />
Key Features<br />
• Includes a 12 Volt DC supply (15 mA max) to power the<br />
sensor<br />
• Fits into the wiring space behind the sensor<br />
• Input for normally closed (NC) switch supports alarm<br />
conditions<br />
• Fully programmable using DIGIDIM Toolbox and Designer<br />
software.<br />
Technical Data<br />
DALI consumption: 10 mA + sensor supply < 25 mA max<br />
Sensor supply:<br />
12 V @ 15 mA maximum<br />
(non-isolated)<br />
Overload protection: ±7 V<br />
Short-circuit current: 0.5 mA maximum<br />
Debounce period: 50 ms<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 40<br />
Dimensions<br />
20 mm<br />
30 mm<br />
170 mm<br />
50 mm<br />
mm<br />
10<br />
Encapsulated printed circuit board, weight 12 g<br />
Product Order Code: 441<br />
Connections<br />
0V<br />
1<br />
2<br />
+12V<br />
0V<br />
DA+<br />
DA-<br />
Input e.g. Alarm (normally closed)<br />
Unused<br />
Sensor supply<br />
DALI<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA-<br />
60<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 033 1 02/08/<strong>2013</strong>
Input Unit (440)<br />
The Input Unit is a fully DALI-compatible interface, designed<br />
to allow customer specified switches, sensors, time clocks or<br />
other on/off control devices to be incorporated into a DIGIDIM<br />
lighting control system. It has 8 volt-free inputs which may<br />
be either momentary or latching, permitting the selection of<br />
DALI commands.<br />
Key Features<br />
• Status LED<br />
• Out of box operation<br />
• Physical/Mode selection switch<br />
• Can be used with momentary or latching switches<br />
• DIGIDIM / DALI<br />
Note: Not compatible with 905, 910 or 920 Routers.<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Overload protection: ±35 V<br />
Short-circuit current: 0.5 mA maximum<br />
Debounce period: 50 ms<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Isolation:<br />
4 kV (from DALI)<br />
Dimensions<br />
45 mm<br />
90 mm<br />
70 mm 58 mm<br />
Product Order Code: 440<br />
DIN-rail case 4U-wide. Weight 110 g<br />
Connections<br />
* 50 m max cable length<br />
DA+<br />
DA-<br />
DALI<br />
The screen (SC) connection must be<br />
connected to earth to ensure correct<br />
operation.<br />
DA+<br />
DALI<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 034 1 02/08/<strong>2013</strong> 61
Mini-Input Unit (444)<br />
The Mini-Input Unit is designed to allow customer-specified<br />
switches, sensors, time clocks or other on/off control devices<br />
to be incorporated into a DIGIDIM lighting control system. The<br />
Mini-Input Unit is suitable for inclusion into all standard size<br />
back boxes, together with a suitable mains rated switch.<br />
Key Features<br />
• Touch dimming with a momentary push switch<br />
• Can be used with momentary or latching switches<br />
• DIGIDIM / DALI<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Overload protection: ±7 V<br />
Short-circuit current: 0.5 mA maximum<br />
Debounce period: 50 ms<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 40<br />
Dimensions<br />
20 mm<br />
30 mm<br />
170 mm<br />
50 mm<br />
mm<br />
10<br />
Encapsulated printed circuit board. Weight 10 g<br />
Product Order Code: 444<br />
Connections<br />
BLACK<br />
RED<br />
ORANGE<br />
YELLOW<br />
GREEN<br />
BLUE<br />
PURPLE<br />
C<br />
1<br />
2<br />
3<br />
4<br />
D<br />
D<br />
COM<br />
IP1<br />
IP2<br />
IP3<br />
IP4<br />
DALI<br />
Common<br />
Recall/Store Scene 1<br />
Recall/Store Scene 2<br />
Recall/Store Scene 3<br />
Touch Switch Control<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA-<br />
62<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 035 1 02/08/<strong>2013</strong>
Switch Interface Unit with LED Tellback (445)<br />
The DIGIDIM 445 is a very compact interface unit suitable for<br />
the conversion of 3rd party switches or button panels, to be<br />
compatible with a <strong>Helvar</strong> lighting control system. The unit<br />
provides four switch inputs for use with volt free contacts,<br />
and four LED output drivers for indicator LEDs. The compact<br />
design means that the unit can be mounted within a 3 rd party<br />
switch/button module or back box.<br />
Key Features<br />
• Compact design<br />
• 4 Switch inputs<br />
• 4 LED Driver outputs<br />
• DIGIDIM / DALI<br />
Technical Data<br />
DALI consumption: 15 mA<br />
Overload protection: ±7 V<br />
Short-circuit current: 0.5 mA maximum<br />
Debounce period: 50 ms<br />
Isolation:<br />
No isolation from DALI network:<br />
Switches must provide user protection<br />
LED output:<br />
5 V source, 1 kΩ source impedance<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 00<br />
Dimensions<br />
23 mm<br />
30 mm <strong>14</strong> mm<br />
Product Order Code: 445<br />
Weight 10 g<br />
Connections<br />
Switches<br />
LED feedback<br />
* Also common cathode<br />
connection possible, please refer<br />
to 455 documentation<br />
DALI<br />
DA+<br />
DA-<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 050 1 02/08/<strong>2013</strong> 63
Imagine Input Unit (942)<br />
The Input Unit is an interface allowing customer-specified<br />
switches, sensors and time clocks to be incorporated into<br />
Imagine and DIGIDIM Router systems. It has 8 volt-free<br />
switch inputs which can be momentary or latching. Inputs 1 -<br />
4 may be configured as 0 - 10 V analogue inputs.<br />
Key Features<br />
• Status led<br />
• Can be used with momentary or latching switches<br />
• Can be used with 0-10 V analogue devices<br />
• DIGIDIM / DALI<br />
Note: Compatible with 905, 910 or 920 Routers.<br />
Technical Data<br />
DALI consumption: 10 mA<br />
Ambient temperature: 0…35 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Storage temperature: -10 °C…+70 °C<br />
Isolation:<br />
4 kV<br />
Voltage-free Switched Inputs<br />
Overload protection: ±35 V<br />
Short-circuit current: 0.5 mA maximum<br />
Dimensions<br />
45 mm<br />
90 mm<br />
Analogue Inputs<br />
Input range:<br />
Over voltage protection:<br />
Input impedance:<br />
0-10 V<br />
±15 V<br />
7.5 kΩ<br />
70 mm 58 mm<br />
DIN-rail case 4U-wide. Weight 110 g<br />
Product Order Code: 942<br />
Connections<br />
max. 50 m<br />
1 2 3 4<br />
5 6 7 8<br />
COM<br />
10V<br />
942<br />
0V<br />
1 2 3 4<br />
COM<br />
0-10V<br />
DA+<br />
DA-<br />
DALI<br />
0V-10V<br />
0V<br />
max. 50 m<br />
The screen (SC) connection must be<br />
connected to earth to ensure correct<br />
operation.<br />
DA+<br />
DALI<br />
DA-<br />
64<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 036 1 02/08/<strong>2013</strong>
LCD TouchPanel (924x)<br />
The TouchPanel (924) is a 3.5” touch sensitive 65,000 colour<br />
LCD screen that can be used for controlling and programming<br />
a <strong>Helvar</strong> lighting control system.<br />
Key Features<br />
• Built-in astronomic real-time clock<br />
• Automatic scene changing (sequences and cycles)<br />
• Integral infrared receiver<br />
• Customisable graphics and user language selection<br />
• Compatible with <strong>Helvar</strong> DIGIDIM Router system via DALI<br />
• Can be powered by 458 Dimmer<br />
Technical Data<br />
Power supply:<br />
<strong>14</strong>-50 VDC, externally supplied,<br />
(401 or 402 recommended)<br />
Ambient temperature: 0…35 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
64 mm<br />
<strong>14</strong>6 mm<br />
88 mm<br />
* Requires Double gang UK backbox (provided in the<br />
package)<br />
29 mm<br />
6 mm<br />
Product Order Code:<br />
9240 White<br />
9241 Polished Brass<br />
9242 Brushed Stainless Steel<br />
113 mm<br />
Wall-mounted. Weight 350 g<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
924<br />
402<br />
S-DIM<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 038 1 02/08/<strong>2013</strong> 65
freedom in lighting<br />
INTEGRATION<br />
Energy saving is a key benefit from<br />
any control system and modern<br />
building management is increasingly<br />
required to deliver those savings.<br />
Integration plays a key role in this as<br />
more and more facilities managers<br />
and owners are choosing systems<br />
that not only report their own usage,<br />
but are able to communicate with<br />
other building systems and deliver<br />
cross system automation.<br />
It is now essential for a commercial lighting control system<br />
to be able to report on its energy usage, emergency testing<br />
and lighting faults to the user. With integration this is<br />
possible, whether it is on a web-enabled device, BMS, or<br />
other system.<br />
Integration of open protocols, such as DALI, DMX, BACnet,<br />
EnOcean, Ethernet is now possible. <strong>Helvar</strong> is a member<br />
of DALI AG, EnOcean Alliance, and a partner of Tridium’s<br />
Niagara AX framework, which provides our customers<br />
with a vast opportunity to integrate different systems in an<br />
intelligent manner.<br />
<strong>Helvar</strong>’s continuing investment in integration capabilities<br />
extends beyond our free-to-license Niagara drivers and<br />
<strong>Helvar</strong>Net protocol. We are dedicated to developing products<br />
that facilitate integration and deliver the efficiency savings<br />
our clients require. Please check the <strong>Helvar</strong> website for the<br />
latest information - www.helvar.com.<br />
66 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
<strong>Helvar</strong> IP Driver<br />
As one of the originators of DALI our experience and<br />
knowledge of lighting protocols is world class.<br />
Our Niagara driver provides a clear advantage to our<br />
customers and freedom of choice for integration.<br />
Benefits of the <strong>Helvar</strong> IP Driver<br />
• Intergrates all DALI & EnOcean devices<br />
• Control of 1280 devices per JACE<br />
• Only 1 Ethernet port required<br />
• Automatic Discovery - devices/points<br />
• Widgets - easy creation of PX graphic for luminaires, button<br />
panels, PIR sensor and Emergency DALI Ballasts<br />
• Component Creator - runtime<br />
FULL DALI CONTROL VIA A HELVAR ROUTER<br />
Command & Query Messages<br />
• DeviceState<br />
• LampFailure<br />
• Missing<br />
• Faulty<br />
• OutputLevel<br />
• PowerConsumption<br />
Direct Actions<br />
• Recall Scene<br />
• Direct Level<br />
• Direct/Modify Proportion<br />
Group Actions<br />
• Recall Scene<br />
• Store Scene<br />
• Direct level<br />
• Direct/Modify Proportion<br />
• Emergency Function Test<br />
• Emergency Duration Test<br />
• Stop Emergency Test<br />
• Reset Battery Total Lamp Time<br />
For more information including how to download and apply for a licence for the driver visit www.helvar.com/downloads/tools<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 062 02/08/<strong>2013</strong> 1/1 67
freedom in lighting<br />
USER INTERFACE<br />
END-USER LIGHTING SYSTEM<br />
CONTROL AND ENERGY<br />
MONITORING INTERFACE<br />
uSee is a web-based lighting system management interface<br />
that allows end-users to monitor their energy usage and<br />
adjust scene levels via any web accessing device be it a PC<br />
or tablet.<br />
uSee Interface puts the management of a lighting system<br />
in the hand of end-users, without any need for Designer<br />
programming software knowledge. The Interface’s<br />
contemporary and intuitive design allows end users to call up<br />
real-time energy usage reports a few easy steps.<br />
uSee works by automatically scanning your lighting system’s<br />
Designer programme settings and interpretting them into<br />
plain English so that the people who use the system day to<br />
day can make adjustments to their scene setting levels and<br />
rename label fields to suite their need.<br />
68 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
uSee User Interface<br />
ENERGY MONITORING KEY FEATURES<br />
• Real-time energy usage reporting<br />
• Historical reporting<br />
• Easily defined schedules<br />
• Compatible with most web enabled devices<br />
• Ideal for Facilities Managers<br />
SCENE RECALL AND EDIT KEY FEATURES<br />
• Recall scenes<br />
• View channel levels<br />
• Check group status<br />
• Set channel levels<br />
• Record new scene levels<br />
• Access by authorised users only<br />
MAINTENANCE KEY FEATURES<br />
• Monitors lamp failures<br />
• Schedule lamp replacement<br />
• Sends alarms by email<br />
EMERGENCY LIGHTING TEST KEY FEATURES<br />
• Function & Duration tests<br />
• Automatic scheduling of tests<br />
• Logging & Reporting<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
69
AV-Interface (503AV)<br />
The AV-Interface is a DIN-rail mounted unit that permits<br />
the connection of a DIGIDIM system to the RS232 port on a<br />
personal computer/AV-system. There is full optical isolation<br />
between the DIGIDIM system and the RS232 I/O (input /<br />
output port).<br />
Key Features<br />
• Status LED<br />
• 4 kV isolation between DALI and the RS232 port<br />
• Terminal blocks for wiring<br />
• DIGIDIM /DALI<br />
Technical Data<br />
DALI consumption: 15 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
45 mm<br />
90 mm<br />
35 mm 58 mm<br />
DIN-rail case 2U-wide. Weight 100 g<br />
Product Order Code: 503AV<br />
Connections<br />
RS232<br />
RX<br />
TX<br />
GND<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
70<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 037 1 02/08/<strong>2013</strong>
USB-to-DALI Interface Unit (510)<br />
USB to DALI interface connecting a PC, running <strong>Helvar</strong><br />
Toolbox programming software, to a <strong>Helvar</strong> DIGIDIM DALI<br />
network. The 510 Interface unit is housed in a standard <strong>Helvar</strong><br />
panel module.<br />
Key Features<br />
• Simple insertion into DIGIDIM modular panels<br />
• Quick and simple PC-to-DALI connection<br />
• Black and white fascias included<br />
• Standard mini-B USB connector<br />
• Powered from DALI network<br />
Technical Data<br />
DALI consumption: 4 mA<br />
Ambient temperature: 0 °C …40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Isolation:<br />
Double isolation from DALI network<br />
IP rating: 20<br />
USB:<br />
Mini-B socket<br />
Max. USB cable length 5 m<br />
Dimensions<br />
48.40 mm<br />
35.40 mm 31.80 mm<br />
Product Order Code: 510<br />
Weight 30 g<br />
Connections<br />
DA+ SC<br />
DA-<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com REF 23 060 1 02/08/<strong>2013</strong> 71
Power Supply (ceiling mount) (401)<br />
Fully DALI compatible Power Supply Unit, designed to provide<br />
a DIGIDIM system with the required supply of up to 250 mA.<br />
Key Features<br />
• Status LED<br />
• DALI short circuit and over temperature protected<br />
• DIN-rail or wall mounted with brackets supplied<br />
• DIGIDIM / DALI<br />
• Clips for optional DIN-rail mounting<br />
Technical Data<br />
Supply voltage: 220-240 VAC, 50-60 Hz<br />
External MCB protection: 6 A<br />
Standby Power: 1.7 W<br />
Max. total losses: 4 W<br />
DALI supply:<br />
250 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
IP rating: 30<br />
Dimensions<br />
401<br />
63 mm<br />
100 mm 51 mm<br />
Wall or DIN-rail mounted. Weight 450 g<br />
Product Order Code: 401<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
401<br />
white<br />
black<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
72<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 041 1 02/08/<strong>2013</strong>
Power Supply (402)<br />
Fully DALI compatible Power Supply Unit, designed to<br />
provide a DIGIDIM system with the required supply of up to<br />
250 mA. Unit is DIN-rail mounted.<br />
Key Features<br />
• Status LED<br />
• DALI short circuit and over-temperature protected<br />
• DIGIDIM / DALI<br />
Technical Data<br />
Supply voltage: 85-264 VAC, 45-65 Hz<br />
External MCB protection: 6 A<br />
Standby Power: 0.6 W<br />
Max. total losses: 1.6 W<br />
DALI supply: 20 VDC (nominal) 250 mA<br />
Ambient temperature: 0…40 °C<br />
Relative humidity: 90 % max, non-condensing<br />
Dimensions<br />
402<br />
45 mm<br />
90 mm<br />
Product Order Code: 402<br />
35 mm 58 mm<br />
DIN-rail case 2U-wide. Weight 80 g<br />
Connections<br />
L<br />
N<br />
E<br />
L<br />
N<br />
E<br />
402<br />
DA+<br />
DA-<br />
DALI<br />
DALI<br />
DA+<br />
DA-<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 042 1 02/08/<strong>2013</strong> 73
freedom in lighting<br />
DESIGNER SOFTWARE SUITE<br />
<strong>Helvar</strong> Designer is a Microsoft® compatible software suite. It<br />
provides an intuitive tool for engineers to design, commission<br />
and program both <strong>Helvar</strong> 905, 910 & 920 router systems.<br />
<strong>Helvar</strong>’s ongoing software and hardware development<br />
ensures that all system components are compatible and<br />
perform reliably.<br />
DESIGN<br />
With Designer it is possible to create off-line designs from<br />
the office, or program on-line to create or fine tune the<br />
lighting system design. Three levels of password protection<br />
are available to secure the system data. Scene data can be<br />
transferred to and from other Microsoft® packages such as<br />
Excel.<br />
COMMISSIONING<br />
An important function of Designer software is the<br />
commissioning of <strong>Helvar</strong> system devices. This is typically a<br />
one-off exercise done upon completion of the physical device<br />
installation. During this first stage, all system devices are<br />
identified, tested, named and grouped.<br />
74 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
PROGRAMMING<br />
During this stage the intelligence of the system devices is programmed.<br />
The programmed functionality is determined by the demands of the<br />
lighting designer or end user.<br />
Functions include:<br />
• Scenes and fade times<br />
• Links, sequences and conditional logic<br />
• Multisensor intelligence<br />
• Room partition functionality<br />
MONITORING, LOGGING AND REPORTING<br />
Designer also features functionality to monitor and log system events. It<br />
allows diagnostic reports of device behaviour and facilitates fault finding.<br />
• Live monitoring of scenes or load levels<br />
• Logging of emergency test results<br />
• Log entries are automatically time stamped<br />
• Log to hard disk (CSV file format, MS Excel compatible)<br />
INTEGRATION - OPC & ETHERNET I/O (HELVARNET)<br />
Many building systems are converging and require some level of<br />
integration. For this the following integration options are available:<br />
• The OPC module offers an interface (OPC server) for open connectivity,<br />
interactive control and data exchange between <strong>Helvar</strong> router systems<br />
and external host systems such as an HVAC (OPC client).<br />
• The Ethernet I/O module offers a tool for direct router system access.<br />
Ethernet commands (either TCP or UDP) can be used to control and<br />
monitor the router system. Alternatively, a <strong>Helvar</strong> router can send<br />
Ethernet commands to external Ethernet enabled devices. Applications<br />
include direct PC access to <strong>Helvar</strong>’s system for custom front-end<br />
software solutions; Panel PC for intuitive user interfacing and control<br />
of e.g. Ethernet enabled Audio/Video gateway. For more information on<br />
how to use Ethernet I/O commands please refer to Designer help file.<br />
DALI EMERGENCY<br />
The DALI Emergency module is used to monitor and test DALI Emergency<br />
devices.<br />
• Out-of-box functionality & auto EM device grouping<br />
• Manual tests & automatically scheduled test<br />
• Functional tests (short operational test)<br />
• Duration tests (comprehensive test)<br />
• Live or logged reporting (CSV file format)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
75
freedom in lighting<br />
TOUCHSTUDIO SOFTWARE<br />
TouchStudio allows an Ethernet enabled Windows® PC or<br />
XP-based panel PC to easily access <strong>Helvar</strong> router systems<br />
(905 / 910 / 920). Customized graphical user interfaces can<br />
be created with <strong>Helvar</strong> TouchStudio Editor (free), and these<br />
can then be used with <strong>Helvar</strong> TouchStudio Runtime (licensed)<br />
to provide intuitive control and monitoring of a <strong>Helvar</strong> lighting<br />
system.<br />
Applications include easy facility-manager access in<br />
museums, meeting rooms, hotel reception desks and<br />
shopping malls. In office applications, a small graphical<br />
application can run on the employees’ PCs, putting them in<br />
control of their personal lighting and avoiding the need for<br />
hardware panels and cabling.<br />
The TouchStudio software provides the programmer with a<br />
library of graphical components to choose from, to assist<br />
creating simple and user-friendly Touch Panel designs.<br />
Examples include buttons, sliders, text fields, passwords<br />
and backgrounds. Editing is done via familiar “drag & drop”<br />
functionality. And project designs can be saved and opened<br />
at a later stage to make changes or enhancements to the<br />
design.<br />
Download latest version of TouchStudio software from www.helvar.com/downloads/tools<br />
76 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 043 1 02/08/<strong>2013</strong>
WORKFLOW<br />
The TouchStudio Editor produces a project folder that can be uploaded to 3rd party Windows based PC peripherals. The<br />
TouchStudio Runtime application ensures the execution of the graphical project folder on the physical device. Included in<br />
the Editor is a simulator that allows the programmer to test the graphical design before uploading it to the physical user<br />
interface. Once the runtime is installed and configured the graphical user interface will communicate via the Ethernet<br />
backbone to the <strong>Helvar</strong> router system (905, 910 and 920).<br />
TouchStudio Editor<br />
Project folder<br />
905 / 910 / 920 Router<br />
-Configuration<br />
-Simulation<br />
- Connected via Ethernet<br />
- Translates user actions to<br />
control commands<br />
Ethernet<br />
Panel PC<br />
USB key<br />
DALI SDIM<br />
DMX<br />
TouchStudio Editor<br />
PC workgroup<br />
905 / 910 / 920 Router<br />
-Configuration<br />
-Simulation<br />
- Connected via Ethernet<br />
- Translates user actions to<br />
control commands<br />
Ethernet<br />
DALI SDIM<br />
DMX<br />
Server PC<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
77
freedom in lighting<br />
ToolBox<br />
TOOLBOX SOFTWARE<br />
The DIGIDIM Toolbox Software Package is a complete<br />
Windows®-based application for designing, programming<br />
and maintaining a DIGIDIM lighting control system.<br />
The <strong>Helvar</strong> Toolbox Software is available for download from<br />
the Download section of the <strong>Helvar</strong> website www.helvar.com<br />
Key Features<br />
• Online and off-line programming<br />
• System backup and restore<br />
• Off-line system simulation<br />
Note: Requires DALI Serial Interface (505) or USB/DALI Interface (510)<br />
to connect to lighting system.<br />
DIGIDIM <strong>Lighting</strong> Control System<br />
(510)<br />
78<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
REF 23 039 1 02/08/<strong>2013</strong>
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
79
freedom in lighting<br />
LED DRIVERS<br />
<strong>Helvar</strong>’s LED offering includes a<br />
range of Constant Current drivers<br />
including dimmable and nondimmable<br />
solutions. The LED drivers<br />
can be used for indoor and outdoor<br />
applications for spot lights, down<br />
lights, flood lights and linear strip<br />
lighting.<br />
The <strong>Helvar</strong> LED range is designed for easy installation and<br />
long life. All drivers provide power with high efficiency. The<br />
dimmable drivers ensure reliable and smooth dimming from<br />
1 % - 100 %. <strong>Helvar</strong>’s LED drivers are complemented by a full<br />
and compatible range of <strong>Helvar</strong> controls and sensor solutions,<br />
suitable for both luminaire based (μDim, iDim, MIMO3) and<br />
networked applications (DIGIDIM Router).<br />
OUTLOOK<br />
Further exciting LED product developments are in the pipeline<br />
for <strong>2013</strong>, showing <strong>Helvar</strong>’s continuous commitment to<br />
supporting luminaire manufacturers in making a successful<br />
transition to LED. Stay in tune with our website for continuous<br />
new LED products.<br />
80 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
<strong>Helvar</strong>’s LED drivers have been developed based on our<br />
expertise and knowledge of the key LED applications in the<br />
lighting market. Following look-up table provides an easy<br />
LED driver summary. The table links each LED driver to its<br />
typical application area. In addition it lists it control interface<br />
and maximum power rating. More detail can be found in the<br />
component catalogue or www.helvar.com<br />
Driver type<br />
Switching<br />
1 - 10 V<br />
DALI<br />
DMX<br />
Max.output<br />
Power<br />
LL6-U-CC - - - 7<br />
LL20-U-CC - - - 20<br />
LL1x20-E-DA - - - 20<br />
LC1x30-E-CC - - - 30<br />
LC1x30-E-AN - - - 30<br />
LC1x30-E-DA - - - 30<br />
LL1x40-E-CC - - - 40<br />
LL1x40-E-DA - - - 40<br />
LL2x35-E-CC - - - 2x35<br />
LL2x35-E-DA - - - 2x35<br />
LL1x70-E-CC - - - 70<br />
LL1x70-E-DA - - - 70<br />
OL1x60-E-CC - - - 63<br />
OL1x100-E-CC1 - - - 105<br />
OL1x100-E-CC2 - - - 101<br />
LC50-U-DX3 - - - 50<br />
To download the <strong>Helvar</strong> LEDesign calculator go to:<br />
http://www.helvar.com/downloads/ledesign-standalone<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
81
LL1x20-E-DA *<br />
1x20 W Dimmable DALI LED driver<br />
• Selectable constant current output: 350 / 500 / 700 mA<br />
• Maximum 20 W load<br />
20 W 220 - 240 V, 50 - 60 Hz<br />
• DALI control input, 1 %-100 % dimming range<br />
• Low stand-by power 0.3 W<br />
• Protected up to 4 kV power network fast transients<br />
• High efficiency, ≥ 0.86<br />
* Preliminary information. For availability please check with your sales representative<br />
Connections<br />
Alternative<br />
parallel connection<br />
L<br />
N<br />
(+)<br />
I n<br />
Switch-Control<br />
DALI<br />
(-)<br />
I tot = 350 / 500 / 700 mA<br />
I 2<br />
I 1<br />
Note: Not suitable for load side switching operation.<br />
I fv = I 1 + I 2 + ... + I n<br />
= 350 / 500 / 700 mA +/- 5%<br />
Mains Characteristics<br />
Voltage range<br />
DC range<br />
198 - 264 VAC<br />
176 - 280 VDC,<br />
starting voltage > 190 VDC<br />
Max mains current at full load 0.09 - 0.12 A<br />
Frequency<br />
0 / 50 - 60 Hz<br />
U-OUTmax (abnormal) 80 V<br />
Stand-by power<br />
0.3 W<br />
Load Output<br />
Output current<br />
350 / 500 / 700 mA<br />
Max output power<br />
20 W<br />
Efficiency, at full load, typical ≥ 0.86<br />
I-OUT 350 mA 500 mA 700 mA<br />
P-out (max) 20 W 20 W 19.6 W<br />
U-OUT 10-57 V 10-40 V 10-28 V<br />
λ 0.89c 0.92c 0.92c<br />
max 0.86 0.86 0.86<br />
Operating Conditions and Characteristics<br />
Max.temperature at tc point 75 °C<br />
Ambient temperature range -20…+50 °C<br />
Storage temperature range -40…+80 °C<br />
Maximum relative humidity no condensation<br />
Life time<br />
50 000 h, at TC max<br />
(90 % survival rate)<br />
Connections and Mechanical Data<br />
Wire size 0.5 - 1.5 mm 2<br />
Wire type<br />
solid core and fine-stranded<br />
Maximum driver to LED wire length 5 m<br />
Weight<br />
110 g<br />
IP rating<br />
IP20<br />
Conformity & Standards<br />
General and safety requirements EN 61347-1<br />
Particular safety requirements for d.c. or a.c. supplied<br />
electronic controlgear for LED modules, acc. to EN 61347-2-13<br />
Thermal protection class<br />
EN61347, C5e<br />
Mains current harmonics, acc. to EN 61000-3-2<br />
Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3<br />
Radio Frequency Interference, acc. to EN 55015<br />
Immunity standard, acc. to EN 61547<br />
Performance requirements, acc to EN 62384<br />
Digital adressing lighting interface (DALI) ** EN62386-207<br />
Compliant with relevant EU directives<br />
ENEC, CE & SELV marked<br />
** with additional extensions<br />
Note: See page 88 for dimensions, (no. 1)<br />
82<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
02.08.<strong>2013</strong> 1/1
LC1x30-E-DA<br />
1x30 W Dimmable DALI LED driver<br />
• Selectable constant current output: 350 / 500 / 700 mA<br />
(custom currents on request)<br />
• Maximum 30 W load<br />
• DALI control input, 1 %-100 % dimming range<br />
• Low stand-by power 0.3 W<br />
• Protected up to 4 kV power network fast transients<br />
• High efficiency, 0.86<br />
• Optional click-on strain relief for independent use<br />
• External NTC thermal input<br />
• iDim compatible<br />
30 W 220-240 VAC, 50-60 Hz<br />
Connections<br />
L<br />
N<br />
DALI<br />
Switch-Control<br />
Alternative<br />
parallel connection<br />
I n<br />
NTC<br />
I 2<br />
(-)<br />
(+)<br />
I fv = 350 / 500 / 700 mA<br />
I 1<br />
I fv<br />
I fv = I 1 + I 2 + ... + I n<br />
= 350 / 500 / 700 mA +/- 5%<br />
Note: Not suitable for load side switching operation.<br />
Mains Characteristics<br />
Voltage range<br />
DC range<br />
198 - 264 VAC<br />
176 - 280 VDC,<br />
starting voltage > 190 VDC<br />
Max mains current at full load 0.<strong>14</strong>-0.18 A<br />
Frequency<br />
0 / 50 - 60 Hz<br />
U-OUT max<br />
(abnormal) 80 V<br />
Stand-by power<br />
0.3 W<br />
Load Output<br />
Output current (I-OUT) 350 / 500 / 700 mA<br />
(custom output currents 245-700 mA on request)<br />
Max output power<br />
30 W<br />
Efficiency, at full load, typical ≥ 0.86<br />
I-OUT 350 mA 500 mA 700 mA<br />
P-out (max) 21 W 30 W 30 W<br />
U-OUT 10 - 60 V 10 - 60 V 10 - 43 V<br />
λ 0.90c 0.94c 0.94c<br />
max 0.86 0.86 0.86<br />
Operating Conditions and Characteristics<br />
Max.temperature at tc point 75 °C<br />
Ambient temperature range -20…+50 °C *<br />
(* Independent use t a max<br />
= +45 °C)<br />
Storage temperature range -40…+80 °C<br />
Maximum relative humidity no condensation<br />
Life time<br />
50 000 h, at TC max<br />
(90 % survival rate)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
Connections and Mechanical Data<br />
Wire size 0.5 - 1.5 mm 2<br />
Wire type<br />
solid core and fine-stranded<br />
Maximum driver to LED wire length 5 m (1 m with NTC)<br />
Weight<br />
123 g<br />
(+17 g, strain relief LC1x30-SR)<br />
Thermal sensor input<br />
Input for external<br />
NTC thermal sensor<br />
NTC trigger point<br />
8.2 kΩ<br />
IP rating<br />
IP20<br />
Conformity & Standards<br />
General and safety requirements EN 61347-1<br />
Particular safety requirements for d.c. or a.c. supplied<br />
electronic controlgear for LED modules, acc. to EN 61347-2-13<br />
Thermal protection class<br />
EN61347, C5e<br />
Mains current harmonics, acc. to EN 61000-3-2<br />
Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3<br />
Radio Frequency Interference, acc. to EN 55015<br />
Immunity standard, acc. to EN 61547<br />
Performance requirements, acc to EN 62384<br />
Digital adressing lighting interface (DALI) ** EN62386-207<br />
Compliant with relevant EU directives<br />
ENEC, CE & SELV marked<br />
** with additional extensions<br />
Note: See page 88 for dimensions, (no. 2 & 3)<br />
17.04.<strong>2013</strong> 1/1<br />
83
LL1x40-E-DA1 / LL1x40-E-DA2 *<br />
1x40 W Dimmable DALI LED driver<br />
• Adjustable constant current output:<br />
• DA1: 350 mA (default) - 700 mA<br />
• DA2: 700 mA (default) - 1050 mA<br />
• DALI control input 1 % - 100 % dimming range<br />
• Low standby power 0.4 W<br />
• Protected up to 4 kV power network fast transients<br />
• High efficiency, 0.89<br />
• Overload, open & short circuit protection<br />
• Suitable for Class I, II or SELV luminaire<br />
• External NTC thermal input<br />
• Current setting resistor input<br />
• Optional click-on strain relief for independent use<br />
40 W 220-240 VAC, 50-60 Hz<br />
* Preliminary information. For availability please check with your sales representative<br />
Connections<br />
Alternative<br />
parallel connection<br />
In<br />
I2<br />
I fv = 350 - 1050 mA<br />
I1<br />
Switch-Control<br />
I fv = I 1 + I 2 + ... + I n<br />
L<br />
N<br />
DALI<br />
NTC<br />
R<br />
Note: Not suitable for load side switching operation.<br />
Mains Characteristics<br />
Voltage range<br />
DC range<br />
Max mains current at full load<br />
Frequency<br />
U-OUT max<br />
(abnormal)<br />
Stand-by power<br />
Load Output<br />
198 - 264 VAC<br />
176 - 280 VDC,<br />
starting voltage > 190 VDC<br />
0.18-0.23 A<br />
0 / 50 - 60 Hz<br />
100 V<br />
0.4 W<br />
Output current (I-OUT) DA1: 350 mA (default) - 700 mA<br />
DA2: 700 mA (default) - 1050 mA<br />
Max output power<br />
40 W<br />
Efficiency, at full load, typical ≥ 0.89<br />
I-OUT 350 mA 700 mA 1050 mA<br />
28 W 40 W 40 W<br />
U-OUT 20 - 80 V 20-57 V 20 - 38 V<br />
0.95 0.95 0.97<br />
0.89 0.87 0.86<br />
Operating Conditions and Characteristics<br />
Max.temperature at tc point 75 °C<br />
Ambient temperature range -20…+50 °C *<br />
Storage temperature range -40…+80 °C<br />
Maximum relative humidity<br />
no condensation<br />
Life time<br />
50 000h, at TC max (90 % survival<br />
rate)<br />
Connections and Mechanical Data<br />
Wire size 0.5 - 1.5 mm 2<br />
Wire type<br />
solid core and fine-stranded<br />
Maximum driver to LED wire length 5 m (1 m with NTC)<br />
Weight<br />
150 g<br />
(+10 g, strain relief LL1x40-SR)<br />
Thermal sensor input<br />
Input for external<br />
NTC thermal sensor<br />
NTC trigger point<br />
8.2 kΩ<br />
IP rating<br />
IP20<br />
Conformity & Standards<br />
General and safety requirements EN 61347-1<br />
Particular safety requirements for d.c. or a.c. supplied<br />
electronic controlgear for LED modules, acc. to EN 61347-2-13<br />
Thermal protection class<br />
EN61347, C5e<br />
Mains current harmonics, acc. to EN 61000-3-2<br />
Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3<br />
Radio Frequency Interference, acc. to EN 55015<br />
Immunity standard, acc. to EN 61547<br />
Performance requirements, acc to EN 62384<br />
Digital adressing lighting interface (DALI) ** EN62386-207<br />
Compliant with relevant EU directives<br />
ENEC, CE & SELV marked<br />
** with additional extensions<br />
Note: See page 88 for dimensions, (no. 5)<br />
84<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
02.08.<strong>2013</strong> 1/1
LL1x70-E-DA<br />
1x70 W Dimmable DALI LED driver<br />
• Adjustable constant current output:<br />
• 350 mA (default) - 700 mA<br />
• Dali control input 1 %-100 % dimming range<br />
• Low standby power 0,4 W<br />
• Protected up to 4 kV power network fast transients<br />
• Overload, short & open circuit protection<br />
• Accept DC mains in case of central emergency battery<br />
• High efficiency, > 0.91<br />
• Suitable for class I luminaires<br />
• Current setting resistor input<br />
70 W 220-240 VAC 50-60 Hz<br />
Connections<br />
I fv = 350 - 700 mA<br />
L<br />
N<br />
R<br />
DA<br />
Switch-Control<br />
Note:<br />
• Not suitable for load side switching operation.<br />
• Driver output and current setting circuit are not isolated from mains<br />
Mains Characteristics<br />
Voltage range<br />
DC range<br />
Max mains current at full load<br />
Frequency<br />
U-OUT max<br />
(abnormal)<br />
Stand-by power<br />
Load Output<br />
198 - 264 VAC<br />
176 - 280 VDC,<br />
starting voltage > 195 VDC<br />
0.33- 0.42 A<br />
0 / 50 - 60 Hz<br />
400 V<br />
0.4 W<br />
Output current (I-OUT)<br />
350 mA (default) - 700 mA<br />
Max output power<br />
70 W<br />
Efficiency, at full load, typical ≥ 0.91<br />
I-OUT 350 mA 700 mA<br />
P-out (max) 70 W 70 W<br />
U-OUT 50 - 200 V 50 - 100 V<br />
λ 0.98 0.98<br />
max 0.91 0.91<br />
Operating Conditions and Characteristics<br />
Max.temperature at tc point 75 °C<br />
Ambient temperature range -20…+50 °C *<br />
Storage temperature range -40…+80 °C<br />
Maximum relative humidity<br />
no condensation<br />
Life time<br />
50 000h, at TC max<br />
(90 % survival rate)<br />
Connections and Mechanical Data<br />
Maximum driver to LED wire length<br />
Weight<br />
IP rating<br />
Conformity & Standards<br />
5 m<br />
242 g<br />
IP20<br />
General and safety requirements EN 61347-1<br />
Particular safety requirements for d.c. or a.c. supplied<br />
electronic controlgear for LED modules, acc. to EN 61347-2-13<br />
Thermal protection class<br />
EN61347, C5e<br />
Mains current harmonics, acc. to EN 61000-3-2<br />
Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3<br />
Radio Frequency Interference, acc. to EN 55015<br />
Immunity standard, acc. to EN 61547<br />
Performance requirements, acc to EN 62384<br />
Digital adressing lighting interface (DALI) *<br />
EN62386-207<br />
Compliant with relevant EU directives<br />
ENEC & CE marked<br />
* with additional extensions<br />
Note: See page 89 for dimensions, (no. 6)<br />
Current setting (p. 21)<br />
Resistor R output I fv<br />
open<br />
350mA<br />
8.2 kΩ 500mA<br />
0 Ω 700mA<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
17.04.<strong>2013</strong> 1/1<br />
85
LL2x35-E-DA *<br />
2x35 W Dimmable DALI LED driver<br />
• Adjustable constant current output:<br />
• 350 mA (default) - 700 mA<br />
• Two independent SELV rated output channels<br />
• DALI control input 1 % - 100 % dimming range<br />
• Low standby power 0,4 W<br />
• Protected up to 4kV power network fast transients<br />
• High efficiency, ≥ 0.88<br />
• Overload open & short circuit protection<br />
• Suitable for Class I or II luminaire<br />
• Current setting resistor input<br />
2x35 W 220-240 VAC 50-60 Hz<br />
* Preliminary information. For availability please check with your sales representative<br />
Connections<br />
I fv = 350 - 700 mA<br />
L<br />
N<br />
DA<br />
R<br />
Switch-Control<br />
Note: Not suitable for load side switching operation.<br />
Mains Characteristics<br />
Voltage range<br />
DC range<br />
Max mains current at full load<br />
Frequency<br />
U-OUT max<br />
(abnormal)<br />
Stand-by power<br />
Load Output<br />
198 - 264 VAC<br />
176 - 280 VDC,<br />
starting voltage > 190 VDC<br />
0.33- 0.42 A<br />
0 / 50 - 60 Hz<br />
120 V<br />
0.4 W<br />
Output current (I-OUT)<br />
350 mA (default) - 700 mA<br />
Max output power<br />
35 W / channel<br />
Efficiency, at full load, typical ≥ 0.91<br />
I-OUT 350 mA 700 mA<br />
P-out (max) / channel 35 W / ch 35 W / ch<br />
U-OUT 25-100 V 25-50 V<br />
λ (both channels loaded) 0.98 0.98<br />
(both ch loaded max) 0.88 0.86<br />
Operating Conditions and Characteristics<br />
Max.temperature at tc point 80 °C<br />
Ambient temperature range -20…+50 °C<br />
Storage temperature range -40…+80 °C<br />
Maximum relative humidity<br />
no condensation<br />
Life time<br />
50 000h, at TC max<br />
(90 % survival rate)<br />
Connections and Mechanical Data<br />
Maximum driver to LED wire length<br />
Weight<br />
IP rating<br />
NTC trigger point<br />
Conformity & Standards<br />
NTC<br />
Current setting (p. 21)<br />
Resistor R output I fv<br />
open<br />
350mA<br />
0 Ω 700mA<br />
5 m<br />
365 g<br />
IP20<br />
8.2 kΩ<br />
General and safety requirements EN 61347-1<br />
Particular safety requirements for d.c. or a.c. supplied<br />
electronic controlgear for LED modules, acc. to EN 61347-2-13<br />
Thermal protection class<br />
EN61347, C5e<br />
Mains current harmonics, acc. to EN 61000-3-2<br />
Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3<br />
Radio Frequency Interference, acc. to EN 55015<br />
Immunity standard, acc. to EN 61547<br />
Performance requirements, acc to EN 62384<br />
Digital adressing lighting interface (DALI) ** EN62386-207<br />
Compliant with relevant EU directives<br />
ENEC,CE & SELV marked<br />
** with additional extensions<br />
Note: See page 89 for dimensions, (no. 7)<br />
86<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
02.08.<strong>2013</strong> 1/1
LC50-U-DX3<br />
3 channel DMX LED driver 50 W<br />
• Max. total output power 50 W<br />
• Smooth dimming range 0.1 % - 100 %<br />
50 W 120 - 250 V, 50-60 Hz<br />
• Default output current 350 mA<br />
• Programmable output current (350 – 1050 mA)<br />
• Programmable DMX512 start address<br />
• Optional DMX programming dongle (LC50-PR)<br />
• High efficiency, 0.89 (at full load, 230 VAC)<br />
• High power factor > 0.97c (at full load, 230 VAC)<br />
Connections<br />
(+)<br />
Ch1<br />
(-)<br />
(+)<br />
Ch2<br />
(-)<br />
(+)<br />
Ch3<br />
(-)<br />
(+)<br />
NTC<br />
(-)<br />
(+)<br />
DMX in (-)<br />
(shield)<br />
GND<br />
L<br />
N<br />
NTC<br />
DMX in (+)<br />
DMX in (-)<br />
DMX in (shield)<br />
L<br />
N<br />
Note: Not suitable for load side switching operation.<br />
Mains Characteristics<br />
Voltage range<br />
Max mains current at full load<br />
Frequency<br />
U-OUT max<br />
(abnormal)<br />
Load Output<br />
90 - 305 VAC<br />
0.30 - 0.60 A<br />
50 / 60 Hz<br />
60 V<br />
Output current (default)<br />
350 mA<br />
Output current range (programmable) 350-1050 mA<br />
Max. total output power<br />
50 W<br />
Max. individual channel power 50 W<br />
Efficiency, at full load, typical 0.89<br />
I-OUT 350 mA 350 - 1050 mA<br />
P-out (max) 50 W 50 W<br />
U-OUT 10 - 55 V 10 - 55 V<br />
λ > 0.9c > 0.9c<br />
max 0.89 0.89<br />
Operating Conditions and Characteristics<br />
Max.temperature at tc point 85 °C<br />
Ambient temperature range -20…+50 °C<br />
Storage temperature range -40…+80 °C<br />
Maximum relative humidity<br />
no condensation<br />
Life time<br />
30 000 h, at tc max.<br />
(90 % survival rate)<br />
Connections and Mechanical Data<br />
Wire size 0.5 - 1.5 mm 2<br />
Wire type<br />
solid core and fine-stranded<br />
Maximum driver to LED wire length 5 m<br />
Weight<br />
350 g<br />
IP rating 20<br />
Conformity & Standards<br />
General and safety requirements EN 61347-1<br />
Particular safety requirements for d.c. or a.c. supplied<br />
electronic controlgear for LED modules, acc. to EN 61347-2-13<br />
Thermal protection class<br />
EN 61347, C5e<br />
Mains current harmonics, acc. to EN 61000-3-2<br />
Radio Frequency Interference, acc. to EN 55015<br />
Immunity standard, acc. to EN 61547<br />
Performance requirements, acc to EN 62384<br />
Compliant with relevant EU directives<br />
CE, UL pending, VDE & ENEC pending, SELV<br />
Optional<br />
USB to DMX programming dongle LC50-PR<br />
Note: See page 88 for dimensions, (no. 4)<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
17.04.<strong>2013</strong> 1/1<br />
87
Dimensions<br />
1<br />
4.4<br />
175<br />
40 25.2<br />
165<br />
184<br />
2 3<br />
106<br />
103<br />
93.5<br />
4.2<br />
4.2<br />
67<br />
57.5<br />
57.5<br />
127<br />
4<br />
130 30<br />
119<br />
76<br />
66.5<br />
5<br />
With strain relief (LL1x40-SR)<br />
46.5 28<br />
168<br />
36.5<br />
36.5<br />
184 225<br />
88<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
T22 0<strong>14</strong> 1A 02/08/<strong>2013</strong> 1/2
6<br />
7<br />
35 21<br />
370<br />
380<br />
1 LL1x20-E-DA<br />
2 LC1x30-E-DA, LC1x30-E-AN<br />
3 LC1x30-E-DA, LC1x30-E-AN (+ LC1x30-SR)<br />
4 LC50-U-DX3<br />
5 LL1x40-E-DA1 / LL1x40-E-DA2 (+ LL1x40-SR)<br />
6 LL1x70-E-DA<br />
7 LL2x35-E-DA<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com T22 0<strong>14</strong> 1A 02/08/<strong>2013</strong> 2/2<br />
89
freedom in lighting<br />
ELECTRONIC BALLASTS<br />
One of the first companies to develop<br />
and manufacture electronic ballasts,<br />
<strong>Helvar</strong>’s history in these products<br />
extends back to the early 1980s.<br />
Since that time, <strong>Helvar</strong> has remained at the forefront, offering<br />
a comprehensive range of innovative electronic ballasts<br />
covering all relevant applications with T5, T8 and compact<br />
fluorescent lamps. The tables below show lamp categories<br />
where ballast combinations are found.<br />
For T5 lamps<br />
For T8 lamps<br />
For compact<br />
lamps<br />
For HID lamps<br />
DIGITAL DALI ELECTRONIC BALLASTS<br />
EL-iDim -<br />
EL-iDim-c - -<br />
ANALOGUE CONTROLLABLE ELECTRONIC BALLASTS<br />
EL-sc -<br />
STANDARD ELECTRONIC BALLASTS<br />
EL-s -<br />
EL-su -<br />
EL-ngn - - -<br />
EL-ngn5 - -<br />
EL-es - - -<br />
EL-TCs -<br />
EP-h - - -<br />
Please refer to <strong>Helvar</strong> component catalogue for full details.<br />
www.helvar.com<br />
90 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
DALI ELECTRONIC BALLASTS<br />
EL-iDim / EL-iDim-c DALI ballasts are designed for a<br />
broad range of applications from the smallest intelligent<br />
luminaires to major lighting installations in large building<br />
complexes. What’s more, they offer the important advantage<br />
of enabling everything to be achieved with the same ballasts.<br />
EL-iDim / EL-iDim-c DALI ballasts are also fully compatible<br />
with <strong>Helvar</strong> iDim sensors, the combination creating the latest<br />
high-tech innovation available to the lighting market. With<br />
out-of-box functionality, the <strong>Helvar</strong> system is moreover, easy<br />
to install and use, and maintenance costs are always kept to<br />
a minimum.<br />
In the design of EL-iDim / EL-iDim-c, customer input played a<br />
crucial role – leading to superior features such as:<br />
• OCC technology, guaranteeing the highest possible EEI<br />
= A1 BAT<br />
• Remarkable low stand-by power<br />
• Smooth and stepless dimming from 100 % to 1 %<br />
• Multi-lamp operation, allowing one ballast to drive all<br />
HE-T5 lamps<br />
• Multi-lamp operation between several compact lamps<br />
• EL-iDim-c ballast are suitable for use both in single and<br />
twin lamp operation<br />
• The ballasts also have an in-built data register capable<br />
of storing information on running hours, energy consumption,<br />
mains voltage, lamp voltage etc. This can<br />
be very useful in large installations where the lighting<br />
management and maintenance is centralized in one<br />
monitoring room.<br />
OCC TM - OPTIMUM CATHODE CONTROL<br />
The proven OCC TM - Optimum Cathode Control<br />
technology is used in <strong>Helvar</strong> EL-s, EL-sc, EL-iDim and<br />
EL- TCs electronic ballast ranges.<br />
OCC TM ensures that the electrical parameters supplied to<br />
the lamp are always optimum, minimising system losses<br />
and maximising lamp lifetime. The achieved energy<br />
saving is considerable compared to existing ballasts on<br />
the market.<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
91
EL-iDim<br />
Digital DALI electronic ballasts for T5 fluorescent lamps<br />
• Digital DALI control<br />
• Switch-Control<br />
<strong>14</strong>-80 W 220-240 V, 50-60 Hz<br />
• Stand-by consumption 0.3 W<br />
• Dimming range 1-100 % *)<br />
• Only 21 mm high<br />
• Microprocessor controlled<br />
• Standard & sidemount possibilities<br />
• User friendly, quick release connectors<br />
<br />
Lamp<br />
type **<br />
Wattage<br />
No. of<br />
lamps<br />
Ballast EEI Dimensions Weight Circuit power Mains<br />
current<br />
Lamp power<br />
T5<br />
(g) (W) (A) (W)<br />
<strong>14</strong> 1 EL1x<strong>14</strong>-35iDim A1 BAT 1 250 17 0.08-0.07 13.7<br />
<strong>14</strong> 2 EL2x<strong>14</strong>-35iDim A1 BAT 2 330 32.5 0.15-0.<strong>14</strong> 13.7<br />
<strong>14</strong> 3 EL3x<strong>14</strong>iDim A1 BAT 2 310 47.5 0.22-0.20 13.7<br />
<strong>14</strong> 4 EL4x<strong>14</strong>iDim A1 BAT 2 330 62 0.29-0.27 13.7<br />
21 1 EL1x<strong>14</strong>-35iDim A1 BAT 1 250 23.5 0.11-0.10 20.7<br />
21 2 EL2x<strong>14</strong>-35iDim A1 BAT 2 330 46 0.22-0.20 20.7<br />
24 1 EL1x24iDim A1 BAT 1 250 25.5 0.12-0.10 22.5<br />
24 2 EL2x24iDim A1 BAT 2 330 50.5 0.23-0.21 22.5<br />
28 1 EL1x<strong>14</strong>-35iDim A1 BAT 1 250 32 0.15-0.<strong>14</strong> 27.8<br />
28 2 EL2x<strong>14</strong>-35iDim A1 BAT 2 330 62 0.28-0.26 27.8<br />
35 1 EL1x<strong>14</strong>-35iDim A1 BAT 1 250 39 0.18-0.17 34.7<br />
35 2 EL2x<strong>14</strong>-35iDim A1 BAT 2 330 73.5 0.36-0.30 34.7<br />
39 1 EL1x39iDim A1 BAT 1 250 42.5 0.20-0.18 38<br />
39 2 EL2x39iDim A1 BAT 2 330 82.5 0.38-0.35 38<br />
49 1 EL1x49iDim A1 BAT 1 250 55 0.25-0.23 49.3<br />
49 2 EL2x49iDim A1 BAT 2 330 107.5 0.49-0.45 49.3<br />
54 1 EL1x54iDim A1 BAT 1 250 59 0.27-0.25 53.8<br />
54 2 EL2x54iDim A1 BAT 2 330 117 0.53-0.49 53.8<br />
80 1 EL1x80iDim A1 BAT 1 250 86 0.39-0.36 80<br />
80 2 EL2x80iDim A1 BAT 2 365 170 0.78-0.70 80<br />
Note: Please see <strong>Helvar</strong> Component Catalogue for connection diagrams and additional characteristics.<br />
* Dimming range 3-100 % for EL3x<strong>14</strong>iDim & EL4x<strong>14</strong>iDim<br />
** Also compatible with T5-eco lamps, please see <strong>Helvar</strong> Component Catalogue for full details<br />
Dimensions 1 2<br />
Length 'a' (mm) 360 430<br />
Width 'b' (mm) 30 30<br />
Height 'c' (mm) 21 21<br />
'd' (mm) 350 420<br />
d<br />
a<br />
d<br />
c<br />
b<br />
92<br />
Delivery information<br />
Ballast Unit package Transportation package<br />
Minimum<br />
delivery<br />
amount<br />
Plastic<br />
binding<br />
strip<br />
EUR pallet<br />
1200 x 800<br />
Pallet<br />
weight<br />
Pallet<br />
height<br />
(pcs.) (kg) (cm)<br />
EL1 x iDim 10 980 300 40<br />
EL2 x iDim 10 840 325 43<br />
EL3 x iDim 10 840 325 43<br />
EL4 x iDim 10 840 325 43<br />
Right to use German patent DE19757295 of Tridonic Atco<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
26.03.<strong>2013</strong> 1/1
EL-iDim<br />
Digital DALI electronic ballasts for fluorescent lamps<br />
• Digital DALI control<br />
• Switch-Control<br />
24 - 80 W 220-240 V, 50-60 Hz<br />
• Stand-by consumption 0.3 W<br />
• Dimming range 1-100 %<br />
• Only 21 mm high<br />
• Microprocessor controlled<br />
• Standard & sidemount possibilities<br />
• User friendly, quick release connectors<br />
<br />
Lamp<br />
type<br />
Wattage<br />
No. of<br />
lamps<br />
Ballast EEI Dimensions Weight Circuit power Mains<br />
current<br />
Lamp power<br />
T8<br />
TC-L<br />
(g) (W) (A) (W)<br />
36 1 EL1x36iDim A1 BAT 1 250 35.5 0.17-0.15 32<br />
36 2 EL2x36iDim A1 BAT 2 330 70.5 0.32-0.30 32<br />
24 1 EL1x24iDim A1 BAT 1 250 25.5 0.12-0.10 22.5<br />
24 2 EL2x24iDim A1 BAT 2 330 50.5 0.23-0.21 22.5<br />
26 1 EL1x<strong>14</strong>-35iDim * A1 BAT 1 250 29.3 0.13 26<br />
26 2 EL2x<strong>14</strong>-35iDim * A1 BAT 2 330 56 0.25 26<br />
28 1 EL1x<strong>14</strong>-35iDim * A1 BAT 1 250 29.3 0.13 26<br />
28 2 EL2x<strong>14</strong>-35iDim * A1 BAT 2 330 56 0.25 26<br />
36 1 EL1x36iDim A1 BAT 1 250 35.5 0.17-0.15 32<br />
36 2 EL2x36iDim A1 BAT 2 330 70.5 0.32-0.30 32<br />
55 1 EL1x55iDim A1 BAT 1 250 59.5 0.27-0.25 55<br />
55 2 EL2x55iDim A1 BAT 2 330 119.5 0.55-0.50 55<br />
80 1 EL1x80iDim A1 BAT 1 250 86 0.39-0.36 80<br />
80 2 EL2x80iDim A1 BAT 2 365 170 0.78-0.70 80<br />
Note: Please see <strong>Helvar</strong> Component Catalogue for connection diagrams and additional characteristics.<br />
*) Dimming range 3-100 %<br />
Dimensions 1 2<br />
Length 'a' (mm) 360 430<br />
Width 'b' (mm) 30 30<br />
Height 'c' (mm) 21 21<br />
'd' (mm) 350 420<br />
d<br />
a<br />
d<br />
c<br />
b<br />
Delivery information<br />
Ballast Unit package Transportation package<br />
Minimum<br />
delivery<br />
amount<br />
Plastic<br />
binding<br />
strip<br />
EUR pallet<br />
1200 x 800<br />
Pallet<br />
weight<br />
Pallet<br />
height<br />
(pcs.) (kg) (cm)<br />
EL1 x iDim 10 980 300 40<br />
EL2 x iDim 10 840 325 43<br />
Right to use German patent DE19757295 of Tridonic Atco<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
12.03.2012 1/1<br />
93
EL-iDim-c<br />
Digital DALI electronic ballasts for compact fluorescent lamps<br />
• Digital DALI control<br />
• Switch-Control<br />
• Stand-by consumption 0.3 W<br />
• Dimming range 3-100 %<br />
• Multilamp operation<br />
• Single and twin lamp operation<br />
18 - 42 W 220-240 V, 50-60 Hz<br />
<br />
Lamp<br />
type<br />
Wattage<br />
No. of<br />
lamps<br />
Ballast EEI Weight Circuit power Mains current Lamp power<br />
TC-L /<br />
TC-F<br />
T5c<br />
TC-DE /<br />
TC-TE<br />
(g) (W) (A) (W)<br />
18 1 EL1/2x18/24iDim-c A1 BAT 155 18 0.09 16<br />
18 2 EL1/2x18/24iDim-c A1 BAT 155 35.5 0.16 16<br />
24 1 EL1/2x18/24iDim-c A1 BAT 155 26 0.12 22<br />
24 2 EL1/2x18/24iDim-c A1 BAT 155 50 0.23 22<br />
22 1 EL1/2x18/24iDim-c A1 BAT 155 26 0.12 22<br />
40 1 EL1/2x18/24iDim-c A1 BAT 155 44.5 0.20 40<br />
18 1 EL1/2x18iDim-c A1 BAT 155 20 0.09 16.5<br />
18 2 EL1/2x18iDim-c A1 BAT 155 38 0.17 16.5<br />
26 1 EL1/2x26-42iDim-c A1 BAT 155 28 0.13 23<br />
26 2 EL1/2x26-42iDim-c A1 BAT 155 56 0.25 23.5<br />
26 2 EL2x26-42iDim-c A1 BAT 176 56 0.25 25<br />
32 1 EL1/2x26-42iDim-c A1 BAT 155 35 0.16 31<br />
32 2 EL2x26-42iDim-c A1 BAT 176 70.5 0.32 32<br />
42 1 EL1/2x26-42iDim-c A1 BAT 155 46 0.2 41.5<br />
42 2 EL2x26-42iDim-c A1 BAT 176 93 0.42 43<br />
57 1 EL1/2x26-42iDim-c 1)2) A1 BAT 155 61 0.27 56<br />
Note: Please see <strong>Helvar</strong> Component Catalogue for connection diagrams and additional characteristics.<br />
1) Tested and recommended by <strong>Helvar</strong>, not ENEC approved<br />
2) U IN<br />
> 220 V, T a<br />
> 18 °C<br />
Dimensions<br />
Length 'a' (mm) 123.0<br />
Width 'b' (mm) 79.0<br />
Height 'c' (mm) 28.0<br />
'd' (mm) 100.5<br />
‘e’ (mm) 65.0<br />
‘f’ (mm) 111.0<br />
‘g’ (mm) 25.5<br />
Delivery information<br />
Ballast Unit package Transportation package<br />
Minimum<br />
delivery<br />
amount<br />
Carton<br />
Box<br />
Pallet<br />
820 x 1280<br />
Pallet<br />
weight<br />
Pallet<br />
height<br />
(pcs.) (kg) (cm)<br />
EL-iDim-c 10 40 800 <strong>14</strong>8 48<br />
Right to use German patent DE19757295 of Tridonic Atco<br />
94<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
T07 120 1F 13.02.2012 1/1
SPECIFYING INFORMATION<br />
System Compatibility<br />
Part No.<br />
Description<br />
DIGIDIM<br />
Standalone<br />
DIGIDIM<br />
Router<br />
Imagine<br />
Router<br />
page<br />
no.<br />
1xx / 2xx Modular Panels 44<br />
13xx / 23xx Control modules / frames 45-46<br />
18xx EnOcean Switces with 434 with 434 with 434 47<br />
303 Infrared Remote 50<br />
311 Ceiling PIR Detector 51<br />
312 Multi Sensor 52<br />
313 Low Profile Microwave Detector 53<br />
3<strong>14</strong> Tilting Microwave Detector 54<br />
315 iDim Sense (Standalone & System) 55<br />
317 High Bay PIR Presence / Absence Detector 56<br />
318 Wall-Mounted PIR Presence / Absence Detector 57<br />
329 DALI External Light Sensor 58<br />
401 Power Supply (ceiling mount) - - 72<br />
402 Power Supply (DIN Rail) - - 73<br />
416S / 425S Thyristor Dimmer (Wall Mount) 43<br />
434 EnOcean Gateway 59<br />
440 Input Unit - - 61<br />
441 Occupancy Detector Interface 60<br />
444 Mini Input Unit 62<br />
445 Switch Interface Unit with LED Tellback 63<br />
452 Universal Dimmer (DIN Rail) 15<br />
454 4 x 500 W, Trailing Edge Dimmer 16<br />
455 Thyristor Dimmer (DIN Rail) 17<br />
458x Chassis System 27-37<br />
472 / 474 1 / 4 Ch Ballast Controller (DIN Rail) 18-19<br />
478 8-Channel DALI Controller 20<br />
490 Blinds Controller (DIN Rail) 21<br />
491 1 Ch Relay Unit 22<br />
492 16 A 1-channel Relay Unit 23<br />
493 1-Channel Signal Relay Unit 24<br />
494 / 498 4 / 8 Ch Relay Unit (DIN Rail) 25-26<br />
503 AV-interface 70<br />
510 USB Interface - - 71<br />
905 Router (DIN Rail) - 12<br />
910 Router (DIN Rail) - 13<br />
920 Router (DIN Rail) - <strong>14</strong><br />
924x LCD Touchpanel 65<br />
935 / 939 4 / 8 Scene & Modifier Panels - 48<br />
942 Input Unit - 64<br />
HESxx / HES9x Rack System - - 38-42<br />
Designer Software - 74<br />
TouchStudio Software - 76<br />
Toolbox Software - - 78<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
95
SPECIFYING INFORMATION<br />
Installation notes<br />
When Designing, Specifying and Installing a <strong>Helvar</strong> lighting control system always refer to latest technical information<br />
(Installation guides, User and configuration manuals) found from the product packagings and online from www.helvar.com.<br />
Cable Requirements<br />
• DALI connections of up to 300 m can be made with any 2 wire 0.5 - 1.5 mm 2 mains rated cable<br />
• The DIGIDIM panels must be earthed as shown in the installation instructions<br />
• In rare instances where the environment may be electrically noisy, due to adjacent circuits carrying high switching currents,<br />
we recommend a 2 wire twisted pair screened and sheathed cable.<br />
• DALI cable must be mains-rated and the maximum voltage drop along the length of the cable must not exceed 2V.<br />
Connection Cable Type Cable Length<br />
DALI 0.5 mm² to 1.5 mm² max. 300 m @ 1.5 mm 2<br />
mains rated cable (recommended)<br />
Note: Supply output 250 mA (nom)<br />
S-DIM Low loss RS485 type; multi-stranded, max. 1000 m (without repeater)<br />
twisted and shielded; 3 or 4 core plus screen;<br />
0.22 mm 2 to 1.5 mm 2<br />
Recommended: one or two twisted pairs<br />
(screened and earthed) e.g. ‘Belden 8102’<br />
96 <strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com
SPECIFYING INFORMATION<br />
Sensor selection<br />
Features<br />
DIGIDIM System Sensors<br />
Control output<br />
Motion<br />
Detector<br />
Constant<br />
Light<br />
Bright Out<br />
IR<br />
Receiver<br />
Dimming<br />
Relay<br />
Output<br />
Page<br />
311 Ceiling PIR DALI PIR - - - 51<br />
312 Multisensor DALI PIR - - 52<br />
313 Low Profile MW DALI Microwave - - - 53<br />
3<strong>14</strong> Tilting MW DALI Microwave - - - 54<br />
315 iDim System sensor DALI PIR - - 55<br />
317 High Bay sensor DALI PIR - - - 56<br />
318 Wall Mounted PIR DALI PIR - - - 57<br />
329 External Light Sensor DALI - - - - 58<br />
Features<br />
Standalone Sensors<br />
Control output<br />
Motion<br />
Detector<br />
Constant<br />
Light<br />
Bright Out<br />
IR<br />
Receiver<br />
Dimming<br />
Relay<br />
Output<br />
Page<br />
Minisensor3 DALI * PIR - -<br />
iDim Sense 316 DALI * PIR - -<br />
μDim SL-MW-DA DALI * Microwave -<br />
μDim SL-MW-AN 1 - 10 V Microwave -<br />
μDim SL-MW-SW Switching Microwave - -<br />
μDim SS-PIR-AN 1 - 10 V PIR -<br />
μDim SS-PIR-SW Switching PIR - -<br />
MIMO3 1 - 10 V - - - -<br />
MIMO2 1 - 10 V - - - -<br />
Please refer to <strong>Helvar</strong> component catalogue for full<br />
details. www.helvar.com<br />
* DALI broadcast, for standalone luminaire use<br />
<strong>Helvar</strong> | Data is subject to change without notice. More information at: www.helvar.com<br />
97
i Dim<br />
do you?<br />
Who are <strong>Helvar</strong><br />
<strong>Helvar</strong> is an international lighting technology company specialising<br />
in energy-efficient components and solutions for lighting and lighting<br />
control systems.<br />
Our independence and understanding of lighting components,<br />
electronics and control systems gives a clear advantage to our<br />
customers by providing real freedom of choice.<br />
Our customer base comprises of luminaire manufacturers, electrical<br />
and lighting designers, electrical contractors and specifiers. <strong>Helvar</strong> is<br />
an independent partner that seeks to build long-lasting cooperation<br />
with its customers.<br />
www.helvar.com<br />
<strong>Helvar</strong> has representatives all over the world.<br />
For additional information, please visit www.helvar.com<br />
REF MAC 25 013 1A English 02/08/<strong>2013</strong><br />
Due to a policy of continuous improvement, <strong>Helvar</strong> reserve the right to alter specifications without notice at anytime.<br />
Cover image: Statoil Headquarters in Fornebu, Norway, photographed by Doan Dominico Mortensen Nguyen.