USArmy-ApacheLongbow

TM 1-1520-251-10
3A.53.7 ALE Status Window. The ALE status window
displays the current ALE net number, name, call address,
and self address, when the HF radio is in ALE mode.
3A.54 HF ALE NETS PAGE
The HF ALE NETS page (fig 3A-77) provides up to 20
non-modifiable ALE nets for selection.
Al-
3A.54.2 PAGE Back and PAGE Forward Buttons.
low selection between two pages of HF ALE nets.
3A.55 HF PAGE - ECCM MODE
The HF ECCM Mode page (fig 3A-78) provides specific
controls and status when the HF radio is in the ECCM
mode. In ECCM operation the HF radio will frequency hop
on a set of frequencies. Each radio in the net must have
the same ECCM data fill and time of day to interchange
voice or data in this mode.
LBA5149
LBA5150A
Figure 3A-77.
HF ALE NETS Page
Figure 3A-78.
HF Page - ECCM Mode
The HF ALE NETS page contains the following unique
buttons:
• R2-R6
• L2-L6
NET (1-5) option buttons
NET (6-10) option buttons
• B2 PAGE Back button
• B3 PAGE Forward button
3A.54.1 NET (1-10) Option Buttons. Option buttons
provide the capability to select from up to 20 non-modifiable
ALE nets in the HF radio.
The HF ECCM Mode page contains the following unique
buttons:
• L3 ANTENNA TUNE button
• L4 SYNC button
• R2 NET ROLE button
3A.55.1 ANTENNA TUNE Button. Selecting the AN-
TENNA TUNE button initiates tuning of the ECCM scanset.
3A.55.2 SYNC Button. Selecting the SYNC button initiates
an ECCM time synchronization of the ECCM scanset.
Use or disclosure of this information is subject to the restriction(s) on the title page of this document.
Change 4 3A-67