Brochure (PDF File) - Pinnacle Architectural Lighting

®
®

QuickShip
10 Day Quick Ship
Fast track projects are becoming more
of the norm rather than the exception.
Both Adeo and Adeo Shallow can ship
in 10 days or less.
Over 90% Efficient
Captive Enclosed Lens
Adeo’s exclusive enclosed lens remains attached
to the fixture. No more lost pieces or
hardware during routine fixture maintenance.
Clean, Uniform Aesthetic
Adeo’s one-piece, co-extruded satine lens
creates a soft glow down the center of the
fixture while the ribbed side projects light to
the side panels for a fully luminous look.
Sustainable
Qu
Adeo has over 25 configurations
with 90% plus efficiencies
allowing for power densities as
low as 0.50 W/sq. ft. making it
an ideal solution for LEED or Rebate
Qualified projects.
30% less Material
Pinnacle Architectural Lighting is committed
to being a good steward to our
environment. Adeo is manufactured using
partially recycled content and utilizes
30% less material than your average 20
gauge troffer.
Ideal for Shallow Plenum Installations
With heights as low as 1-3/4”, Adeo T5 and Adeo Shallow are the perfect solution for
projects with limited plenum space. A mere 4” is all that is required for installation.
Shielding and Lamping Options
Adeo offers multiple lamping and shielding options.
Choose from T5, T5HO, T8 or Biax and pair
it with one of Adeo’s 4 distinct appearances. Select
from the standard satine lens, internal baffle
(shown above), round perf or linear slot.
2-7/8”
Adeo T5 (AD)
Satine Lens (A) Round Perf (R) Linear Slot (L)
Adeo Shallow (AS)
1-3/4”

®
®

Pinnacle Architectural Lighting’s Adeo creates a soft natural light while providing efficiencies as high as
90%. The unique one-piece, co-extruded lens evenly illuminates the center while minimizing lamp imaging.
The lens’ ribbed sides project light across the curved surface of the fixture creating the appearance
of a fully luminous fixture. The fully enclosed lens assembly swings open and remains captive during
routine maintenance.
2 x 2 Luminaire
Adeo 2x2 (AD22)
4-3/8”
2-7/8” (T8)
(T5)
Adeo S
24"
Side View
1-7/8”
4-3/8”
(T8) 2-7/8”
(T5)
24"
2” (T8)
S
1-7/8”
LAMP OPTIONS
1 and 2 lamp Biax 1, 2, 3 T5 / T5HO 1, 2, 3 T8
2 x 4 Luminaire
Adeo 2x4 (AD24)
24"
4-3/8”
(T8) 2-7/8”
(T5)
Adeo S
Side View
1-7/8”
4-3/8”
(T8) 2-7/8”
(T5)
48"
2” (T8)
1-7/8”
LAMP OPTIONS
1, 2, 3 T5 / T5HO 1, 2, 3 T8
1 x 4 Luminaire
Adeo 1x4 (AD14)
4-3/8”
(T8) 2-7/8”
(T5)
12"
®
4-3/8”
(T8) 2-7/8”
(T5)
Side View
48"
2” (T8)
Adeo S
1-7/8”
LAMP OPTIONS
1, 2 T5 / T5HO
1, 2 T8
1-7/8”
®

4”
4”
4”
Side View
28"
Side View
28"
Side View
16"
28"
4”
At a depth of 1-3/4”, Adeo Shallow is the ideal lighting solution for projects with low plenum
52"
52"
restrictions. Available in 2 lamp T5 and T5HO with all three housing sizes.
4”
Adeo Shallow 2x2 (AS22) Adeo Shallow 2x4 (AS24) Adeo Shallow 1x4 (AS14)
1-3/4”
Adeo 2x2 Surface Mount (AD22) 1-3/4”
24"
4”
24"
Adeo 2x2 and 2x4 Surface 1-3/4” Mount (AD22 and AD24)
12"
3-1/8”
1-3/4”
Side View
24"
Side View
28"
28"
1-3/4”
Side View
4”
48"
Side View
25-1/2"
1-3/4”
25-1/2" (2x2)
49-1/2” (2x4)
Side View
3-1/8” 48"
Adeo 2x4 Surface Mount (AD24)
Adeo 1x4 Surface Mount (AD14)
28"
Side View
52"
Adeo 1x4 Surface Mount (AD14)
4”
16"
4”
4”
13-1/2"
Surface Mount
Side View
3-1/8”
Adeo’s surface mount allows for design consistency 3-1/8” in spaces where
recessed lighting is not an option. The 20 gauge steel frame creates
49-1/2"
a dramatic look without sacrificing performance. The frame easily
secures to the ceiling. Surface mount is available on all Adeo sizes
and all lamping options.
Adeo T5, T5HO 2x2, 2x4 and 1x4 Surface Mount
Side View
3-1/8”
3-1/8”
4”
25-1/2"
13-1/2"
52"
Side View
3-1/8”
25-1/2" (2x2)
49-1/2” (2x4 and 1X4)
Adeo T8 2x2, 2x4 and 1x4 Surface Mount
4-1/2”
4-1/2”
25-1/2"
13-1/2"
Side View
4-1/2”
25-1/2” (2x2)
49-1/2" (2x4 and 1x4)
Mounting Detail
Adeo installs seamlessly into any standard grid ceiling system. The flexible mounting system allows customers to select based on the fixture installed
either flush with or above the ceiling tile.
G1 (1”Ceiling Grid) Mounting Options G9 (9/16”Ceiling Grid) Mounting Options GS (Screw Slot Grid) Mounting Options
1” Ceiling Grid
with Standard Tile
1” Ceiling Grid
with Tegular Tile
9/16” Ceiling Grid
with Standard Tile
9/16” Ceiling Grid
with Tegular Tile
Screw Slot Ceiling Grid
9/16” Ceiling Grid with
Tegular Tile (fixture flush
with tile)

Air Return (AR)
Air Return is an alternative method for allowing air to access the plenum. Optional Air
Return blends into ceiling grid with minimal slot visibility.
Antimicrobial Paint (AM)
Antimicrobial paint finish is available on both Adeo and Adeo Shallow. An antimicrobial
additive is added into the powder coating that suppresses the growth and spread of
microorganisms such as bacteria
and mold. Choose the antimicrobial
option for healthcare projects
where clean environments are a
necessity.
®

integration. Taking advantage
of daylight harvesting
potential to save energy and
Daylight Harvestingcreate smarter, more
responsible environments is
Integrated Daylight Sensor (DSM and DSS) easily achieved through use of
the integrated daylight sensor
Today's option building for Adeo. environments
In addition to inherent green benefits, the integrated require daylight thoughtful sensor is choices a turnkey
solution with no extra control wires to the fixture. Easily from specified planning with through fixtures final and by
simply following the recommended best practices integration. regards Taking to placement advantage of the
daylight sensor, you can add daylight harvesting of to your daylight project's list harvesting of energy
saving green potential.
Technical
- Controls up to 20 dimming ballasts
- +1.5v to +10.5v input control to ballast
- Sensor adjustable from 1/3 to 3x light output
potential to save energy and
create smarter, more
responsible environments is
easily achieved through use of
the integrated daylight sensor
option for Adeo.
In addition to inherent green benefits, the integrated daylight sensor is a turnkey
solution with no extra control wires to the fixture. Easily specified with fixtures and by
simply Sensor following Setupthe recommended best practices in regards to placement of the
daylight
No additional
sensor,
commissioning
you can add
is
daylight
required.
harvesting
To adjust
to
light
your
levels
project's
in spaces
list of
that
energy
require
saving
more
green
or less
potential.
fluorescent light, simply rotate the sensor aperture in the fixture.
Technical
Default factory
- Controls up to 20 dimming ballasts preset for 45fc
- +1.5v to +10.5v input control to ballast at work surface
- Sensor adjustable from 1/3 to 3x light output
Rotate the aperture
Sensor Setup
clockwise for
less fixture light
No additional commissioning is required. To adjust light levels in spaces that require
Rotate the aperture
more or less fluorescent light, simply rotate the counter sensor clockwise aperture in the fixture.
+
for more fixture light
Default factory
preset for 45fc
at work surface
-
-
+
Rotate the aperture
clockwise for
less fixture light
Rotate the aperture
counter clockwise
for more fixture light
Energy Savings
45fc
Help reduce overall energy usage on a project and contribute to the sustainability of the
building with easily achieved energy savings. Depending on location and season,
savings can be as significant as 15-45% annually.
0fc
Design Placement
While 45fc the daylight sensor is flexible and easy to specify, key guidelines for sensor
placement within your project or space should be followed to maximize Energy Savings daylight
harvesting potential.
0fc
Fixture Contribution
Design Placement 3
Fixture Contribution
Total Light with Sensor
Excess Light without Sensor
As daylight increases, the Daylight Sensor will compensate for
50% or more of additional contribution as shown above.
Daylight Contribution
As daylight increases, the Daylight Sensor will compensate for
50% or more of additional contribution as shown above.
While the daylight sensor is flexible and easy to specify, key guidelines for sensor
placement within your project or space should 2 be followed to maximize daylight
harvesting potential.
5
1
1
3
5
Excess Light without Sensor
4
4
Typical Sensor placement
Satellite Fixture connection
Follow these guidelines for optimal results:
1
2
3
4
5
Daylight Contribution
Follow these guidelines for optimal results:
Energy Savings
1 Sensor should be within 6'-10' from windows
2 Typical daylighting zone from windows is 15'
3 Sensors should not be placed within 5' of each other
4 Sensor should be placed over typical work area
5 Recommended mounting height for sensor is 8'-10'
2
Sensor should be within 6'-10' from windows
Typical daylighting zone from windows is 15'
Sensors should not be placed within 5' of each other
Sensor should be placed over typical work area
Recommended mounting height for sensor is 8'-10'
Maintenance
Typical Sensor placement
Satellite Fixture connection
A notch in the fixture end cap denotes
which side of the lens to pull from. Gently
pull down on side of lens to release.
Adeo lens easily opens and remains captive
during routine maintenance.
For ballast maintenance, remove screws
and gently pull on lamp socket to release
the ballast tray from the fixture.
Ballast tray swings down for easy access
during ballast maintenance. Once
completed, push ballast tray back into
fixture cavity. Secure the ballast tray with
screws, install lamps and close lens.

LUMINAIRE SPECIFICATION
Sample Catalog #: AD22A-2T5HO-G1-120-1C-W
AD___- _____- __- ___- __- W- ___
HOUSING LAMPS MOUNTING VOLTAGE CIRCUIT/WIRING FINISH OPTIONS
AD22A- 2X2 Adeo 2x2 only Acoustical Grid Ceiling 120- 120V 1C- Single Circuit, Normal W- White QS- Quick Ship 5
with Satine Lens 1BX25- (1) 25W Biax G1- 1” Ceiling Grid 277- 277V 2C- Dual Circuit, Normal 3,7
G9- 9/16” Ceiling Grid 347- 347V 1 Single Circuit Dimming 7
TW- Through-Wired 6
AD22R- 2X2 2BX25- (2) 25W Biax
1D-
GS- Screw Slot Ceiling Grid UNV-UNV 2D- Dual Circuit Dimming 3,7
SW- Step Switching 7
with Round Perf 1BX40- (1) 40W Biax
DSM- Integral Daylight Sensor Master - Sensor
AD22L- 2X2 2BX40- (2) 40W Biax
(120/277) 1E- Single Circuit with
Emergency Circuit 4,7
Included 7
with Linear Slot 1BX55- (1) 55W Biax Inaccessible Ceiling
DSS- Integral Daylight Sensor Satellite - Sensor
AD22B- 2X2
1B- Single Circuit with
Battery Pack 4,7
Not Included
Adeo 2x2 and 2x4 FL- Standard Flange
7
with Baffle
GLR- Internal Fast-Blow Fuse
1T5- (1) T5
(Separate Flange Kit)
2B- Dual Circuit with
2T5- (2) T5
One Battery Pack 3,4,7
AR- Air Return
AD24A- 2X4
S- Surface Mount
CP- Chicago Plenum
with Satine Lens 3T5- (3) T5
FW6- 6’, 18-gauge, Flex Whip
AD24R- 2X4 1T5HO- (1) T5HO
FW12-12’, 18-gauge, Flex Whip
with Round Perf 2T5HO- (2) T5HO
AM- Antimicrobial Paint
AD24L- 2X4 3T5HO- (3) T5HO
SI- Seismic Clips
with Linear Slot 1T8- (1) T8
AD24B- 2X4 2T8- (2) T8
with Baffle 3T8- (3) T8
AD14A- 1X4
Adeo 1x4
with Satine Lens
AD14R- 1X4
with Round Perf
AD14L- 1X4
with Linear Slot
AD14B- 1X4
with Baffle
1T5- (1) T5
2T5- (2) T5
1T5HO- (1) T5HO
2T5HO- (2) T5HO
1T8- (1) T8
2T8- (2) T8
1 Consult factory for 347 volt ballast.
4 Emergency circuit or battery pack to be on center lamp with 3 lamp configurations.
2 Not available for use with a battery pack.
5 Quick Ship includes universal voltage, white finish, Chicago Plenum, single (1C) and dual circuit
3 Dual circuit available for 2 (side-by-side) and 3 (inboard/outboard)
lamp configurations.
(2C).
6 Individual fixtures are through-wired for continuous pattern. Fixtures cannot be joined.
7 Some configurations will not accommodate all options. Consult factory.
Sample Catalog #: AS22A-2T5HO-G1-120-1C-W
AS___- 2T5__- __- ___- __- W- ___
AS24R- 2X4
with Round Perf
AS24L- 2X4
with Linear Slot
AS24B- 2X4
with Baffle
AS14A- 1X4
with Satine Lens
AS14R- 1X4
with Round Perf
AS14L- 1X4
with Linear Slot
AS14B- 1X4
with Baffle
Quick Ship 4
Through-Wired 5
Step Switching (T5) 6
Integral Daylight Sensor Master - Sensor
Included 6
Integral Daylight Sensor Satellite - Sensor
Not Included 6
Internal Fast-Blow Fuse
Air Return
Chicago Plenum
6’, 18-gauge, Flex Whip
HOUSING LAMPS MOUNTING VOLTAGE CIRCUIT/WIRING FINISH OPTIONS
AS22A- 2X2 2T5- (2) T5 Acoustical Grid Ceiling 120- 120V 1C- Single Circuit, Normal W- White
G1- 1” Ceiling Grid 277- 277V Dual Circuit, Normal 3,6
QSwith
Satine Lens 2T5HO- (2) T5HO
2C-
G9- 9/16” Ceiling Grid 347- 347V 1 Single Circuit Dimming 6
TW-
AS22R- 2X2
1D-
GS- Screw Slot Ceiling Grid UNV-UNV 2 2D- Dual Circuit Dimming 3,6
SWwith
Round Perf
DSM-
AS22L- 2X2
(120/277) 1E- Single Circuit with
with Linear Slot
Emergency Circuit
Inaccessible Ceiling
6
DSS-
AS22B- 2X2
1B- Single Circuit with
FL- Standard Flange
with Baffle
Battery Pack 6
GLR-
(Separate Flange Kit)
AR-
AS24A- 2X4
S- Surface Mount
CPwith
Satine Lens
FW6-
FW12-12’, 18-gauge, Flex Whip
AM- Antimicrobial Paint
SI- Seismic Clips
1 Consult factory for 347 volt ballast.
4 Quick Ship includes universal voltage, white finish, Chicago Plenum, single (1C) and dual circuit
2 Not available for use with a battery pack
(2C).
5
3 Individual fixtures are through-wired for continuous pattern. Fixtures cannot be joined.
Dual circuit available for 2 (side-by-side) lamp configurations.
6 Some configurations will not accommodate all options. Consult factory.
12655 East 42 nd Avenue, Suite 50
Denver, CO 80239
Phone: 303.322.5570
Fax: 303.322.5568
www.pinnacle-ltg.com
August 2010 ®