RayClic Components Brochure - INDUSTRIAL HEATER
RayClic Components Brochure - INDUSTRIAL HEATER
RayClic Components Brochure - INDUSTRIAL HEATER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
R<br />
<strong>RayClic</strong><br />
Connection System<br />
The quick-connect system for<br />
electric heating cable<br />
Raychem’s <strong>RayClic</strong> system is the<br />
simplest, fastest, most reliable set of<br />
connections ever developed for<br />
electric heating cable. There is no<br />
wire stripping needed because the<br />
insulation displacement connector<br />
makes the electrical connection.<br />
The <strong>RayClic</strong> system reduces<br />
installation time, eliminates<br />
callbacks, and lowers the total<br />
installed cost of a heating cable<br />
system for plumbers and<br />
electricians.<br />
Simple<br />
• No special tools<br />
• Three-step installation<br />
Reliable<br />
• Intuitive installation<br />
• Rugged, waterproof, UV resistant<br />
enclosure<br />
Cost-effective<br />
• Quick installation<br />
• No callbacks<br />
INSERT<br />
R<br />
LISTED<br />
718 K<br />
Pipe Heating<br />
Cable<br />
®<br />
Desig. 3A,<br />
877Z De-icing<br />
3B, 3C, 2E<br />
and Snow-melting<br />
equipment<br />
F M<br />
APPROVED<br />
TIGHTEN<br />
• No wire stripping.<br />
• No heat-shrinkable tubing.<br />
• Requires only a knife and screwdriver.<br />
SNAP!<br />
• No crimps or terminal blocks.<br />
• No loose wires or braid.<br />
• Screws make the connection.<br />
• No loose parts.<br />
• Less than 3 minutes per connection.<br />
• Visual and audible feedback for every step.
R<br />
<strong>RayClic</strong><br />
WARNING: SHOCK HAZARD<br />
Do not open whil energized<br />
3 1/8" R<br />
<strong>RayClic</strong><br />
WARNING: SHOCK HAZARD<br />
Do not open whil energized<br />
R<br />
R<br />
LISTED DESIG. 3A, 3B, 3C, 2E<br />
LISTED DESIG. 3A, 3B, 3C, 2E<br />
®<br />
®<br />
R<br />
<strong>RayClic</strong><br />
3 1/8"<br />
R<br />
<strong>RayClic</strong><br />
3 1/8"<br />
WARNING: SHOCK HAZARD<br />
Do not open whil energized<br />
WARNING: SHOCK HAZARD<br />
Do not open whil energized<br />
R<br />
R<br />
LISTED DESIG. 3A, 3B, 3C, 2E<br />
LISTED DESIG. 3A, 3B, 3C, 2E<br />
®<br />
®<br />
R<br />
<strong>RayClic</strong><br />
3 1/8"<br />
<strong>RayClic</strong><br />
WARNING: SHOCK HAZARD<br />
Do not open whil energized<br />
3 1/8"<br />
R<br />
LISTED DESIG. 3A, 3B, 3C, 2E<br />
WARNING: SHOCK HAZARD<br />
Do not open whil energized<br />
R<br />
LISTED DESIG. 3A, 3B, 3C, 2E<br />
®<br />
®<br />
<strong>RayClic</strong> Connection System<br />
Connection kits<br />
PC (Power Connection) PT (Powered Tee) PS (Powered Splice)<br />
3 1/8" R<br />
S (Splice) T (Tee) X (Cross)<br />
Accessories<br />
R<br />
E (End Seal) SB-02 (Wall Mounting Bracket) SB-04 (Pipe Mounting Bracket)<br />
Specifications<br />
Rated voltage<br />
Maximum circuit breaker size<br />
Maximum exposure temperature<br />
Minimum installation temperature<br />
Enclosure rating<br />
120-277 Vac<br />
30 A<br />
150°F (65°C)<br />
0°F (–18°C)<br />
NEMA 4X, 6P<br />
Applicable products<br />
XL-Trace<br />
IceStop<br />
HWAT-Plus<br />
5, 8 XL-CR/CT<br />
GM-1X, GM-2X<br />
HWAT-B2, HWAT-G2, HWAT-Y2,<br />
HWAT-P1, HWAT-R2<br />
Ordering information<br />
<strong>RayClic</strong>, HWAT-Plus, IceStop, and XL-Trace are<br />
trademarks of Raychem Corporation.<br />
Raychem Corporation<br />
Commercial & Industrial<br />
Infrastructure Division<br />
300 Constitution Drive<br />
Menlo Park, CA 94025-1164<br />
Tel (800) 545-6258<br />
Fax (800) 611-2323<br />
Fax-on-Demand (800) 329-4494<br />
ciinfo@raychem.com<br />
www.raychem.com<br />
Catalog Part Number Description<br />
<strong>RayClic</strong>-PC 233053 Power connection and end seal<br />
<strong>RayClic</strong>-PT 804231 Power tee and three end seals<br />
<strong>RayClic</strong>-PS 861247 Power splice and two end seals<br />
<strong>RayClic</strong>-S 559871 Splice<br />
<strong>RayClic</strong>-T 014023 Tee and end seal<br />
<strong>RayClic</strong>-X 546349 Cross and two end seals<br />
<strong>RayClic</strong>-E 805979 One end seal<br />
<strong>RayClic</strong>-SB–02 852001 Wall mounting bracket<br />
<strong>RayClic</strong>-SB–04 616809 Pipe mounting bracket<br />
All information, including illustrations, is believed to be reliable. Users, however, should<br />
independently evaluate the suitability of each product for their application. Raychem<br />
makes no warranties as to the accuracy or completeness of the information, and<br />
disclaims any liability regarding its use. Raychem’s only obligations are those in the<br />
Raychem Standard Terms and Conditions of Sale for this product, and in no case will<br />
Raychem be liable for any incidental, indirect, or consequential damages arising from<br />
the sale, resale, use, or misuse of the product. Specifications are subject to change<br />
without notice. In addition, Raychem reserves the right to make changes—without<br />
notification to Buyer—to materials or processing that do not affect compliance with any<br />
applicable specification.<br />
© 1996 Raychem Corporation Printed in USA (Y2668) H55234 4/97