Graphic Operator Interface New 5.7" models ... - Tech-System

Smooth development and design “Realizing added values and cost reduction”
The GP3000 Series adds more value to applications,
reducing costs and labor-hours.
Technique guides
packed full of tips for
increasing added-value
and reducing costs.
* Can be downloaded from the
Otasuke Pro! website.
Record machine status and analyze causes of errors [Event Recorder]
Reduce number of monitors with Video Unit [Video Unit]
Error logs from video recording can be saved and analyzed.
Wide lineup of display
sizes from 5.7" to 15"
Error!
Event Occurrence
0 30 60 90 120 (seconds)
60 seconds 60 seconds
Records and saves up to 60 seconds both before and after
occurrence of an event.
Previously...
The display and image
processing monitor
were separate...
GP
PC
Now...
Combined display and Video Unit can be connected
directly to cameras, image processors, computers, and
other devices. This enables the number of necessary
monitors to be reduced, saving space and reducing costs.
In addition
Computer can be
operated from the GP
Series unit, eliminating
the need for a mouse
or keyboard.
Smooth development and design
In addition
Identify errors by combining
with trend graphs and alarm
logs.
Trend Graph
Monitor the entire manufacturing process [Alarm Function]
Support for up to 32,767 alarms! A single display can monitor alarms
for the entire factory, even for devices and systems that use multiple
PLCs and therefore require huge numbers of alarm messages.
Alarm Monitoring
32,767alarms
Alarm Log
Alarm data for all equipment can can be be handled in by a single a single GP3000 Series unit
UPGRADED
3 types of
Video Units to
suit different
applications
Connect to multiple devices to reduce costs and labor-hours [Multi-Driver/Multi-Ethernet]
Multiple drivers enable central management of
multiple controllers. Link cards are no longer
required, and up to four types of communication
devices can be connected to one display unit.
Previously...
PLC
VM Unit
GP3000-VM01
DVI Input Unit
GP3000-DVI01
Link Ethernet
card card
NEW
RGB Input Unit
GP3000-RGB201
NEW
Connect different devices to the
GP3000 Series and save costs
With GP3000
The gateway for a variety of
communications
devices.
Neither an
Ethernet card,
link card, nor
converter is
necessary.
Application
All-in-one model capable of video
input and DVI input/output
Displays video from a computer
via DVI interface
Displays video from a computer
via analog RGB (2 ch)
Multiple GP3000 Series units can be connected to a
single PLC over an Ethernet. The GP3000 Series can
even be connected directly to a CPU, making it easy
to add new terminals and providing significant cost
savings.
CPU port
Ethernet
Input
Video input x 4 ch (NTSC/PAL)
DVI input x 1 ch
DVI input x 1 ch
Analog RGB input x 2 ch
Slave GP
HUB
Ethernet
Slave GP
Output
DVI output x 1 ch
-
-
Simply add GP3000 Series
units to an Ethernet network
Master GP
Dramatically improved production efficiency
Improve debugging and maintenance
Converter
GP
PLC
When multiple units are connected, lockout
control enables you to prevent multiple operators
from performing operations at the same time.
* Requires function expansion memory (sold separately).
Supported on GP3000 Series of 7.5" and above.
Mounting method differs according to model.
Controller
Controller
PLC
* Available with devices equipped with an Ethernet port.
* GP3300 Series Rev. 4 or higher is required. Please contact your sales agent for details.
* In using the 5.7 inch or smaller size as a master GP, the performance may deteriorate.
Please test the response before using.
13
14