Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SCIENTIFIC COMMITTEE<br />
• Prof. Dr.-Ing. Prof. h.c. Dieter Böhme - SLV Munich, Germany<br />
• Prof. Dr. Ing. Dragoş Dumitru Cioclov - CE Consulting Saarbrücken,<br />
Germany<br />
• Prof. Dr. Ing. Emil Constantin - Ovidius University, Constanţa,<br />
Romania<br />
• Prof. Dr. Luisa Coutinho – Technical University of Lisbon, Portugal<br />
• Dr.-Ing. Heidi Cramer - SLV Munich, Germany<br />
• Dr. Ing. Ştefan Tudor Crăciunoiu - ICTCM, Bucharest, Romania<br />
• Prof. Dr. Ing. Dorin Dehelean - Romanian Welding Society,<br />
Romania<br />
• Prof. Dr. Bilal Dogan - EPRI – Charlotte, SUA<br />
• Dr.-Ing. Jorge F. dos Santos - GKSS - Research Centre Gestaacht,<br />
Germany<br />
• Dr. Nicolae Farbaş - ISIM Timişoara, Romania<br />
• Prof. Dr. Ing. Traian Fleşer - Politehnica University of Timişoara,<br />
Romania<br />
• Dr. Vencislav Grabulov - Institute for Materials Testing, Belgrade,<br />
Serbia<br />
• Prof. Dr. Ing. Radu Iovănaş - Transilvania University of Braşov,<br />
Romania<br />
• Prof. Dr. Wilhelm Kappel - ICPE-CA, Bucharest, Romania<br />
• Dr. Marina Kutin – Gosa Institute, Belgrad,Serbia<br />
• Prof. Dr. Ing. Mihail Mangra - University of Craiova, Romania<br />
• Prof. Dr. Jan Pilarczyk - Instytut Spawalnictwa Gliwice, Poland<br />
• Prof. Dr. Ing. Voicu Safta - Romanian Academy of Technical<br />
Sciences – Timişoara Subsidiary, Romania<br />
• Prof. Dr. Américo Scotti - Uberlândia University, Brazil<br />
• Prof. Dr. Aleksandar Sedmak - Technical University of Belgrade,<br />
Serbia<br />
• Prof. Dr. Ing. Viorel-Aurel Şerban - Politehnica University of<br />
Timişoara, Romania<br />
• Prof. Dr. László Tóth - Bay Zoltán Foundation for Applied Research,<br />
Miskolc, Hungary<br />
• Prof. Dr. Ing. Marin Truşculescu – Romanian Academy of Technical<br />
Sciences – Timişoara Subsidiary, Romania
Since the year 2007, ISIM Timişoara has organized the annual international<br />
conference on welding under the topic Innovative technologies for joining<br />
advanced materials, a very important field, involved in all industrial sectors<br />
and where research plays an avant-garde role.<br />
This year 31 papers were enrolled in the programme. Papers with absolute<br />
<strong>scientific</strong> value will cover following topics:<br />
‣ New joining and microwelding technologies<br />
‣ Modelling and simulation of welding processes<br />
‣ Specific problems in advanced material joining<br />
‣ Quality of welded joints and welded structures<br />
The event will offer the framework for dialogue between participants,<br />
meant to open new directions in <strong>scientific</strong> research.<br />
One workshop is organized in the eve of the conference opening, free of<br />
charge for all the conference participants:<br />
• Welding quality management<br />
Researchers, academic staff, students interested on the conference topic as<br />
well as specialists from industry are warmly invited to take part in the<br />
event that is an attractive mean for information on the most recent<br />
achievements in the field.<br />
ORGANISATION<br />
Venue:<br />
‣ Workshop (15.06.2011) – ISIM Timişoara (30 Mihai Viteazu Bv.)<br />
‣ Conference (16.06.2011) – Adam Müller Guttenbrunn House<br />
(10-12, Gh. Lazăr Str.)<br />
‣ Conference (17.06.2011) – Mechanical Engineering Faculty, room 150<br />
(1 Mihai Viteazu Bv.)<br />
Official languages: English, Romanian<br />
Registration to the event will be made by filling in the attached<br />
Registration Form and sending it to the conference secretariat.<br />
Participation fees: 100 Euros<br />
Participation fee includes conference documents, attendance at the <strong>scientific</strong><br />
sessions, workshop, refreshments, cocktail, and proceedings on CD.<br />
Accommodation: can be booked by EXIMTUR Agency, filling in the<br />
attached form.
PROGRAMME<br />
16.06.2011<br />
09.00-09.20 Conference opening<br />
09.20-11.30 Plenary Session<br />
• On failure risk simulation in pressure vessels and pipe systems.<br />
Static Analysis.<br />
D.D. Cioclov – Germany<br />
• The training and qualification of personel involved in the<br />
adhesives field<br />
J. Piquer – Spain<br />
• Diagnosing stress state of the welded structure P frame rotary<br />
excavator obtained by thermography and tensometry and<br />
fracture mechanical method<br />
M. Prokolab, Z. Milutinovic, N. Markovic, D. Jovanovic, M. Prvulovic,<br />
J. Ignjatovic, I. Vasovic – Serbia<br />
• Short circuit GMA welding process quality assessment based on<br />
electric arc acoustic emissions<br />
E.H. Cayo, S.C. Absi Alfaro Alfaro – Brazil<br />
11.30-12.00 Coffee break<br />
12.00-14.00 Session I – Quality of welded joints and welded<br />
structures<br />
• Joining in the automotive industrie - special know how in<br />
SLV Munich<br />
H. Cramer – Germany<br />
• Phisical model of the fused fluxes granulation with air<br />
D. Pérez Pérez, C.R. Gómez Pérez; F.A. Ruiz Martínez, R.F. Pérez<br />
Santana, J.V. Miguel Oria, R. Quintana Puchol, L. Perdomo González,<br />
A. Cruz Crespo, E. Pérez Zapico – Cuba<br />
• Causes of hydrogen embrittlement in the case of drawn-arc<br />
stud welding<br />
H. Cramer, D. Böhme, A. Jenicek - Germany<br />
• Structural and mechanical properties of different hard welded<br />
coatings for impact plate for ventilation mill<br />
A. Alil, B. Katavić, M. Ristić, D. Jovanović, M. Prokolab, S. Budimir,<br />
M. Kočić – Serbia<br />
14.00-15.30 Lunch break
15.30-17.30 Session II – New joining and microwelding<br />
technologies (I)<br />
• Usage of Aluminium at realization of current conductors<br />
K. Gombos, H. Daşcău - Germany, Romania<br />
• Laser welding process of stainless steel used for biomedical<br />
applications<br />
K. Colic, S. Petronic, A. Sedmak, A. Milosavljevic, Z. Kovacević – Serbia<br />
• Picosecond laser surface hardening of welded Nimonic 263 sheets<br />
S. Petronic, A. Milosavljevic, D. Milanovic, B. Grujic, V. Grabulov – Serbia<br />
• Dissimilar Friction Stir Welding of EN AW 6082 – EN AW 5083<br />
aluminium alloys<br />
R. Gabor, R. Cojocaru, C. Ciucă, L. Boţilă – Romania<br />
• Pulsed LASER-TIG hybrid welding of coated unalloyed steel<br />
thin sheets<br />
A.V. Bîrdeanu, C. Ciucă, M. Iacob – Romania<br />
• Influence of the welding tool’s geometry on productivity on<br />
friction stir welding process<br />
A. Živković, M. Mijajlović, H. Daşcău, A. Sedmak, I. Radisavljević,<br />
D. Milčić, D. Veljić – Serbia, România<br />
17.30-18.00 Coffee break<br />
18.00-20.00 Session III – New joining and microwelding<br />
technologies (II)<br />
• Numerical simulation of the plunge stage in friction stir<br />
welding – different tools<br />
H. Daşcău, A. Sedmak, M. Rakin, D. Veljić, M. Perović, B. Medjo, N. Bajić –<br />
Romania, Serbia<br />
• Advanced GMAW of AlMg4,5Mn alloy using different mixture of<br />
gases<br />
G. Buyukildirim, A. Sedmak, R. Prokić-Cvetković, O. Popović, V. Grabulov,<br />
R. Jovicić, M. Burzić – Serbia<br />
• About some energies which could be applied in joining processes<br />
I. Isarie, C. Bokor, S. M. Itu, M. Wienecke, C. Isarie – Romania<br />
• Research regarding the reconditioning of active components of<br />
agricultural equipment<br />
I. Voiculescu; V. Geantă; H. Binchiciu – Romania<br />
• Microwave Activation Process for Eutectic Microjoining<br />
S.V. Savu – Romania<br />
• Compared characteristics of the overlaying processes<br />
V. Verbiţchi – Romania<br />
20.00-22.00 Cocktail
17.06.2011<br />
09.00-10.40 Session IV – Specific problems in advanced<br />
material joining (I)<br />
• Al-Al 2 O 3 metallic composites consolidated by spark plasma<br />
sintering<br />
V. Tsakiris, E. Enescu, M. Lungu, M. Lucaci, D. Savu, V. Marinescu,<br />
F. Albu, G. Alecu – Romania<br />
• Application of full factorial design for defocusing effects in<br />
laser welding<br />
R. Boboescu – Romania<br />
• Design of experiments and nonlinear modelling to determine<br />
optimum conditions for welding thermoplastic pipes<br />
M. Cocard – Romania<br />
• Friction stir welding behaviour of S420MC steel<br />
R. Cojocaru, L. Boţilă, C. Ciucă – Romania<br />
• Solid-state diffusion bonding<br />
C. Voican, C. Stănescu – Romania<br />
10.40-11.00 Coffee break<br />
11.00-13.00 Session V – Specific problems in advanced<br />
material joining (II)<br />
• Characteristics of friction stir welding tools for high hardness<br />
materials<br />
L. Boţilă, R. Cojocaru, C. Ciucă – Romania<br />
• Welding behaviour of W1.4301 alloyed steel from the<br />
construction of the flat welded table cutting meat from food<br />
industry<br />
D.R. Pascu, R.A. Roşu, S. Drăgoi – Romania<br />
• Research on the accomplishment of lanthanides microalloys for<br />
loading by welding<br />
H. Binchiciu, D.R. Pascu, E. Binchiciu – Romania<br />
• Transient Liquid Phase (TLP) Diffusion Bonding<br />
C. Voican, C. Stănescu – Romania<br />
• A new method to obtain the diploma of International Welding<br />
Engineer (IWE) by distance learning<br />
P. Câneparu – Romania<br />
• New developments in the european system for qualification<br />
and certification in the field of the thermoplastics' welding<br />
I. D. Savu, L. Domuţa – Romania<br />
13.00 Conference closing
Conference Secretariat<br />
National R&D Institute for Welding and Material Testing<br />
30 Mihai Viteazu Bv. 300222 Timişoara, ROMANIA<br />
Tel.: +40 256 491835 ; Fax: +40 256 492797<br />
E-mail: isim@isim.ro