B-4050 Multi-Purpose Tile Adhesive - Prospec

Conforms to OSHA HazCom 2012, CPR & NOM-018-STPS-2000 Standards
SAFETY DATA SHEET
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 CONTROL PARAMETERS
Exposure Guidelines
Occupational Exposure Limits
Ingredient OSHA-PEL ACGIH-TLV
Silica, crystalline, quartz
((10 mg/m 3 )/(%SiO 2 +2) TWA (resp))
((30 mg/m 3 )/(%SiO 2 +2) TWA (total))
((250)/(%SiO 2 +5) mppcf TWA (resp)) 0.025 mg/m³
Formaldehyde 0.75 ppm 0.3 ppm
Ethyl acrylate 5 ppm 5 ppm
Methyl alcohol 200 ppm 200 ppm
8.2 EXPOSURE CONTROLS
Engineering Controls:
8.3 INDIVIDUAL PROTECTIVE MEASSURES
Personal Protective Equipment:
Eye/Face Protection:
Skin Protection:
Hand Protection:
Body Protection:
Respiratory Protection:
General Health and Safety
Measures:
Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Wear eye/face protection.
Wear suitable gloves.
Wear suitable protective clothing.
In case of insufficient ventilation, wear suitable respiratory equipment.
Do not eat, smoke or drink where material is handled, processed or
stored. Wash hands carefully before eating or smoking.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1 INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Mastic.
Color:
Not available.
Odor:
Not available.
Odor Threshold:
Not available.
Physical State:
Solid.
pH: 8.5
Melting Point/Freezing Point:
Not available.
Initial Boiling Point and Boiling Range: Not available.
Flash Point:
Not available.
Evaporation Rate:
Not available.
Flammability:
Not Flammable.
Lower Flammability/Explosive Limit: Not available.
Page 4 of 3