where water ends and confidence begins - Sweeney Materials

WHERE WATER ENDS
AND CONFIDENCE BEGINS
TW 60 SHEET WATERPROOFING MEMBRANE*
TAMKO ® TW-60 is a flexible, self-adhering rubberized asphalt sheet waterproofing membrane with a polymer film on the surface, and a removable
treated release film on the adhesive side. TAMKO TW-60 is especially well suited for below-grade waterproofing of foundation walls, tunnels, earth shelters,
and similar structures. The TW-60 membrane is also suitable for waterproofing plaza decks, parking decks, balconies, and terraces.
TW MOISTURE WRAP
MOISTURE/AIR BARRIER MEMBRANE*
Designed for use as an above-ground moisture/air barrier suitable for application in cavity wall construction, sealing of window
and door perimeters, sealing of wall joints, corners, and other terminations. TW Moisture Wrap is a flexible 40-mil selfadhering
rubberized asphalt sheet membrane with a polymer film on the surface and a removable treated release film on
the adhesive side. It is suitable for application to concrete, block, gypsum, or wood surfaces. Available in factory pre-cut widths of
4”, 6”, 9”, 12”, 18”, 24”, 36” and 39-3/8” rolls.
TW Moisture Wrap
TW FLASH-N-WRAP ® 25
REFLECTIVE SHEET MEMBRANE*
Well suited for application in sealing window and door openings. TW Flash-n-Wrap 25 reflective sheet membrane is a 25-mil-thick
flexible self-adhering rubberized asphalt sheet membrane with a reflective aluminum top surface and a polymer film release
on the adhesive side. Available in factory pre-cut widths of 4”, 6”, 9”, 12” and 18”.
TW FLASH-N-WRAP ® 40
REFLECTIVE SHEET MEMBRANE*
TW Flash-n-Wrap 25
Well suited for application in cavity wall construction. Other uses include gutter repairs and flashing of vents and HVAC units.
TW Flash-n-Wrap 40 reflective sheet membrane is a 40-mil-thick flexible self-adhering rubberized asphalt sheet membrane with
a reflective aluminum top surface and a polymer film release on the adhesive side.
TW-THRU WALL
FLASHING MEMBRANE*
An in-wall flashing membrane designed for use with concrete, masonry, gypsum, or wood wall construction. TW-Thru Wall
Flashing Membrane is a flexible 40-mil self-adhering rubberized sheet membrane with a treated release film and high-density
8-mil polymer film top surface.
TW-Thru Wall
Flashing Membrane
*These products are covered by a 5-year limited warranty. For specific information regarding TAMKO limited warranties contact your local TAMKO representative or visit us at www.tamko.com

TAMKO pioneered America’s first SBS-modified asphalt products for commercial
roofing in 1978, raising the standard for protection against water infiltration.
Today, this same protective technology fortifies TAMKO’s line of
waterproofing products
TWP-1
QUICK DRY PRIMER
Helps promote bond to asphalt, concrete, masonry, and metal surfaces. TAMKO TWP-1 is a highquality
rubberized low-VOC primer formulated for the professional waterproofing contractor. It is ideal
for use in preparing surfaces to receive TAMKO TW-60 sheet waterproofing membranes.
TWP-2
WATER BASE PRIMER
Helps promote bond to asphalt, concrete, masonry, and metal surfaces. TAMKO TWP-2 is highquality
rubberized water-based primer formulated for the professional waterproofing contractor.
It is ideal for use in preparing surfaces to receive TAMKO TW-60 sheet waterproofing membranes.
TWM-1
MASTIC
Designed for mulitple uses, including sealing seams, overlaps, patches, and terminations of TAMKO
waterproofing membranes. TWM-1 mastic is a high-quality trowel-grade rubberized bitumen mastic
that dries to a durable pliable seal allowing for minor expansion and contraction.
TW-HOT MELT
HOT APPLIED LIQUID
MEMBRANE WATERPROOFING*
Used for waterproofing twin-slab construction projects such as plaza decks, bridge decks, podiums,
and pedestrian walkways. It is also suitable for use on tunnels. TW-Hot Melt is a single-component
hot-applied rubberized asphalt compound that forms a tough, flexible thick waterproofing
membrane. Its rubberlike properties and self-healing characteristics help
ensure waterproofing integrity.
TW-HOT MELT
FLASHING MEMBRANE*
Specifically designed to be used as a preformed flashing to ensure proper thickness on
vertical sections. TW-Hot Melt Flashing Membrane consists of a 65-mil rubberized
asphalt membrane with a mineral surfaced face and a removable release film on the
adhesive side.
TW HOT MELT
PRIMER
TW-Hot Melt Primer is a solvent-based polymer-modified asphalt
primer designed to promote adhesion of TAMKO TW-Hot Melt
hot-applied liquid membrane and to prepare the concrete surface. It is used on all concrete
surfaces to which TW-Hot Melt hot-applied membrane and/or TW-Hot Melt Flashing
Membrane is to be applied.
TWH-1
PROTECTION COURSE
Used for the construction of plaza decks, roof terrace decks, parking
decks, or any other horizontal surface as a protective cover for the
waterproofing membrane where moderate traffic is
anticipated. TWH-1 is a premium-quality protection
course roll constructed with a heavyweight TAMKO organic mat impregnated with hot
asphaltic saturant, coated on both sides with weathering-grade asphalt, and surfaced
with mineral granules for superior scuff and abrasion resistance.
TW UNDERLAYMENT
SELF ADHERING UNDERLAYMENT*
Designed for use as an underlayment where prevention of water
penetration is required. TW Underlayment is a 40-mil thick
flexible self-adhering rubberized asphalt sheet membrane with a
polymer film on the surface and removable treated release film
on the adhesive side.
BRIDGEGUARD
*
Provides a water barrier when used as the
waterproofing membrane in bridge deck
treatments prior to application of the paving asphalt top surfacing.
Bridgeguard is a flexible self-adhering sheet membrane
constructed from SBS-modified asphalt. It features a
removable topside "zip strip" and removable release sheet
on the adhesive side to make installation quick and easy.
WWW.TAMKO.COM 1-800-641-4691
JP51224 ©2005 TAMKO Roofing Products, Inc. 997330