SAVE - Enco

Online at use-enco.com
Features:
• Full-length splashguard
• 2 hp, 220v, 1-ph. motor
• Bed is hardened and ground
with reinforced cross ribs
• D1-4 camlock spindle
• 3-year warranty on DRO
14" x 40" Geared Head Gap Bed Bench Lathes
Lathes
SAVE
UP TO $
797
As Low As
$
4,699
Standard Equipment
• 6" 3-Jaw Chuck
• 8" 4-Jaw Chuck
• 10" Faceplate
• Steady Rest
• Follow Rest
• 3 MT Dead Center
• 4-Way Tool Post
• Chip Pan
• Toolbox
• Threading Dial
Wt. Reg. Sale
Description Lbs. Model # Price Price
Bench Lathe Only 1,100 PD328-6153 $5,496.98 $4,699.00
Bench Lathe with Cabinet Stand 1,270 PD328-6135 5,796.98 4,999.00
Bench Lathe with ACU-RITE ® VUE 2-Axis
DRO System Installed and Cabinet Stand 1,320 PD328-6134 7,196.98 6,199.00
Big Bore Geared-Head Engine Lathes
1 year limited warranty!
1-YEAR
LIMITED
WARRANTY
Specifications
Swing Over Bed: 14"
Swing Over Cross Slide: 8"
Distance Between Centers: 40"
Swing Over Gap: 20"
Spindle Bore Taper:
5 MT
Center Taper:
3 MT
18 Spindle Speeds: 70-1500 rpm
Longitudinal Feeds: .002-.024"
Cross Feeds: .001-.012"
40 Inch Threads: 4-112 tpi
22 Metric Threads: .25-6mm
Cross-Slide Travel: 6"
Tailstock
Spindle Travel: 4"
Center Taper:
3 MT
Bed Width: 7 1 ⁄8"
Gap Width: 8"
As Low As
$
8,994 98
Reg. Sale
Description Model # Price Price
Lathes ONLY
14" x 40" PD328-1312 $10,694.98 $8,994.98
16" x 60" PD328-1313 11,694.98 9,494.98
Big Bore Lathe Pkg., PLUS Installed
ACU-RITE ® VUE 2-Axis DRO System
14" x 40" PD328-6126 11,694.98 9,694.98
16" x 60" PD328-6127 12,994.98 10,994.98
3 1 ⁄8" Spindle Bore
• Spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Univeral gearbox allows inch, metric, diametral and module pitch threads,
no change gears required
• Carriage features
one-shot lubrication
and Turcite-B on bed
sliding surfaces
• High-quality ANSI
Class 50 wear-resistant,
cast-iron bed ways are
hardened and ground
• Removable gap allows
up to 23 5 ⁄8" diameter
• Five-position automatic
carriage stop
increases productivity
• T-slotted compound
slide featuring a
four-way tool post
Standard Equipment
• 10" 3-jaw chuck with top reversing jaws
• 12" 4-jaw chuck
• 12" faceplate
• 4-way tool post
• Follow rest
• Large capacity steady rest
• Fully integrated coolant system
• Full length splashguard and coolant return
• Large easy-to-use foot brake
• Articulating halogen work lamp
• Centrally located controls with jog button
• Threading dial
• Mounting pads and levelers
• Dead center
• Live center
• Toolbox and adjusting tools
Specifications 14" x 40" 16" x 60"
Swing Over Bed: 14" 16"
Swing Through Gap: 23 5 ⁄8" 25 7 ⁄8"
Length of Gap: 12 1 ⁄4" 12 1 ⁄4"
Swing Over Cross Slide: 7 5 ⁄8" 10"
Distance Between Centers: 40" 60"
Max. Carriage Travel: 35" 55"
Range of Longitudinal Feeds (In./Rev.): .0015-0.0913" .0015-0.0913"
Max. Cross-Slide Travel: 9" 9"
Range of Cross Feed (In./Rev.): .0006-0.0365" .0006-0.0365"
Max. Compound Slide Travel: 5 1 ⁄8" 5 1 ⁄8"
61 Inch Threads: 1 5 ⁄8-72 tpi 1 5 ⁄8-72 tpi
24 Metric Threads: .05-20mm tpi .05-20mm tpi
Tailstock Spindle Travel: 5" 5"
Tailstock Taper: 4 MT 4 MT
Spindle Mount: D1-8 D1-8
Spindle Bore: 3 1 ⁄8" 3 1 ⁄8"
Spindle Taper (with sleeve): 7 MT (5 MT) 7 MT (5 MT)
12 Spindle Speeds: 42-1800 rpm 25-1800 rpm
Overall Dimensions: 97 1 ⁄2L x 40W x 46 7 ⁄8"H 116 1 ⁄2L x 40W x 48"H
Motor & Electrics: 7 1 ⁄2 hp, 230/460V, 7 1 ⁄2 hp, 230/460V,
3 ph., Prewired 230V 3 ph., Prewired 230V
Wt.: 4,987 lbs. 5,595 lbs.
PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 17