Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Online at use-enco.com<br />
Save with Our Concentrated Formulas<br />
• Extends sump life • Protects against rust<br />
• Machining and grinding on ferrous materials<br />
• Prevents rancidity<br />
• Reduces coolant disposal by 100%<br />
and consumption by up to 50%<br />
Reg. Sale<br />
Size Model # Price Price<br />
1 gal. PD505-2068 $25.98 $21.95<br />
5 PD505-2069 108.98 98.00<br />
Vytron-N Superior Synthetic Coolant<br />
Quality<br />
Coolants At<br />
An Affordable<br />
Price!<br />
TRIM ® Metalworking Fluids<br />
E206 Soluble Oil<br />
• Designed as a general-purpose, multi-metal coolant for<br />
general machining of ferrous and nonferrous metals<br />
• EP additive controls built-up edge<br />
• Fine-emulsion particle size reduces carry-off and<br />
facilitates getting fluid to point of cut<br />
• Leaves a fluid, oily, non-gumming film<br />
SOL ® Heavy-Duty Soluble Oil<br />
• Excellent for the machining of aluminum<br />
and aluminum alloys<br />
• Leaves a fluid residue that will not varnish up<br />
• Wide applications range from 3 to 25%<br />
SC200 Semi-Synthetic Cutting &<br />
Grinding Fluid<br />
• Good for ferrous and nonferrous materials<br />
and aluminum<br />
• No smoke under normal conditions<br />
Metalworking Fluids<br />
5 Gallon Pails<br />
Recommended starting dilution of 5% for all.<br />
DSS 700 & DSS 800— Semi-Synthetic<br />
• Ideal for general-purpose machining and grinding<br />
• Suited for ferrous and most nonferrous materials<br />
DSS 700 Cutting/Grinding Fluid<br />
• For light- to moderate-duty applications, such as<br />
milling, turning, drilling and surface grinding<br />
DSS Cutting/Grinding Fluid<br />
• Designed for moderate- to heavy-duty applications,<br />
such as deep hole drilling, boring, reaming, tapping,<br />
internal and/or grinding<br />
DSS T-TECH—Synthetic<br />
• Duty range: moderate- to heavy-duty operations<br />
• Recommended for machining and grinding<br />
aluminum, iron and steel<br />
• Excellent lubricity, rancidity and mold control<br />
DSY 4100—Synthetic<br />
• Ideal for roll and surface grinding<br />
• For light- to moderate-duty operations<br />
• Exceptionally good bacteria, mold, foam, and rust control<br />
• Best suited for cast iron, nodular iron, and carbon steels<br />
As Low As<br />
$<br />
19 95<br />
Each Case<br />
Qty.: 4+<br />
<strong>SAVE</strong><br />
UP TO<br />
15%<br />
As Low As<br />
$<br />
21 95<br />
Price Each<br />
Case Less Than Case<br />
Desc. Size Qty. Model # Case Qty.<br />
TRIM ® E206 1 gal. Jug 1 PD319-3910 — $22.00<br />
TRIM ® E206 5 gal. Pail 1 PD319-3911 — 96.89<br />
TRIM ® SOL 1 gal. Bottle 4 PD319-3899 $25.98 21.95<br />
TRIM ® SOL 5 gal. Pail 1 PD319-3900 — 92.95<br />
TRIM ® SC200 1 gal. Bottle 4 PD319-3906 24.40 19.95<br />
TRIM ® SC200 5 gal. Pail 1 PD319-3907 — 79.00<br />
100%<br />
Compatible<br />
with the<br />
Original<br />
VALCOOL ®<br />
OAKWASH ® DSC AL<br />
• Recommended for cleaning individual machine and central system<br />
reservoirs, metalworking fluid lines, premix tanks, machines and parts<br />
• Improves rancidity control by removing dirt, grit,<br />
insoluble soaps and oils<br />
• Removes insoluble soaps from dirty central systems in hard water<br />
areas. Does not redeposit soil<br />
• Can also be used at 4% to 5% for aluminum quenching<br />
• Thoroughly removes chip deposits and tramp oil from<br />
central systems and machines<br />
• Contains corrosion-inhibiting ingredients to protect<br />
machines and parts, both ferrous and nonferrous,<br />
from rusting during cleaning<br />
Starting At<br />
$<br />
52 95<br />
Oak Signature VALCOOL® Reg. Sale<br />
Model No. Equivalent Model # Price Price<br />
DSY 4100 VNT 920 PD893-1987 $61.09 $52.95<br />
DSS 700 VNT 700 PD893-1986 99.35 65.99<br />
DSS 800 VNT 800 PD893-1985 118.59 79.95<br />
DSS T-Tech Turn Tech PD893-1984 110.50 78.99<br />
Sale Price<br />
Model # PD893-1988<br />
$<br />
62 95<br />
Regular Price: $92.62<br />
Fluids & Lubricants<br />
Vactra ® No. 1, 2, 3<br />
& 4 Way Oil<br />
For all combinations of cast iron, steel<br />
and nonmetallic way materials on<br />
small-to-medium machine tools; flood<br />
application in large machines.<br />
• Additives eliminate stick-slip and chatter<br />
under thin-film lubrication conditions;<br />
allows smooth, uniform motion<br />
even at low table speeds<br />
• Contains no Class 1<br />
ozone-depleting chemicals<br />
As Low As<br />
$<br />
14 99<br />
<strong>SAVE</strong><br />
UP TO<br />
25%<br />
Reg. Sale<br />
Size Model # Price Price<br />
No. 1<br />
5 gal. PD893-2096 $102.44 $75.99<br />
No. 2<br />
1 gal. PD505-1987 20.10 14.99<br />
5 PD505-1988 81.98 65.99<br />
No. 3<br />
5 gal. PD328-1135 88.98 72.95<br />
No. 4<br />
1 gal. PD505-1989 20.10 14.99<br />
5 PD505-1990 82.98 72.00<br />
Cutting & Tapping Fluid<br />
A New Safer Biodegradable Formula –<br />
Not a Cutting Oil. Does Not Contain<br />
1,1,1-Trichloroethane. Contains No Class<br />
1 Ozone-Depleting Chemicals.<br />
Unique HYDRO-LUBE ® formulation<br />
quickly penetrates to the cutting edge<br />
and instantly breaks down the<br />
metal-to-metal bonds formed<br />
during severe machining<br />
operations. Just a few drops<br />
give dramatic results such as<br />
precise machining, superior<br />
surface finish<br />
and extended<br />
tool life.<br />
As Low As<br />
$<br />
3 89<br />
Price Each<br />
Case<br />
Less Than Case<br />
Size Qty. Model # Case Qty.<br />
8 oz. Spout Top 12 PD325-5965 $4.69 $3.89<br />
1 pt. Spout Top 12 PD505-2022 7.99 6.49<br />
1 gal. Can 4 PD505-2023 45.98 39.98<br />
5 gal. Pail 1 PD505-2024 222.98 159.95<br />
PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 57
Change language