Lubricants & Chemical Products - Who-sells-it.com

Fault Detection
Freezer
A rapid cooling agent for instant
fault-finding on electronic
equipment. Reduces component
temperature to –50°C.
Non-flammable, low toxicity and
odourless in use. Ideal fault
finder for use on PCBs,
transistors, resistors, condensers
and intermittent dry joints. Cools
thermally sensitive parts during
soldering or calibration. Can be
used as a ‘shrink fit’ on close
tolerance metal assemblies.
Product Aerosol Order Code List Offer
Name Size AMB-701 Price/1 Price/1
Freezer 400ml -0750T £12.52 £11.27
Leak Detector
Spray
LD-90
White fluid, designed to identify
even the smallest gaseous leak.
Bubbles in the applied film
indicate location of the leak.
Suitable for use with most
common industrial gases.
NOW also
available!
LD-90 Gel
A brush on non-drip
gel for detecting
leaks on vertical
pipework.
Order Code
Description Size
List Offer
ACN-732 Price/1 Price/1
LD-90 Spray 400ml -6200K £8.27 £6.62
LD90 Gel 250ml -6190K £5.35 £4.28
Anti-Spatter Spray
AS-90
Prevents build up of
weld spatter on work,
nozzles, jigs and
fixtures. Fast acting.
Silicone and CFC-free.
Product Aerosol Order Code List Offer
Number Size ACN-732 Price/1 Price/1
AS-90 400ml -1000K £8.14 £6.51
Bioweld Weld
Anti-Spatter
Water-based, with no harmful
solvents, silicones or mineral
oils. Odourless, non-flammable
and safe in use. Fine spray
ensures total control and
economical coverage. Film is
easily wiped away and leaves no
residues. Allows post welding
operations, painting, plating,
galvanising etc to be undertaken
without interference. Contains a
rust inhibiting agent.
Size
Order Code
AMB-701
List
Price/1
Offer
Price/1
400ml -1400H £3.20 £2.88
MAINTENANCE SPRAYS & LUBRICANTS
Leak Detector Spray
SL1-400A
A specially formulated, performance
white fluid, designed to identify even
the smallest gaseous leak. Applies a
thin uniform film of surface active
agents which identifies any leak or
bleeding of joints, bubbles in the film
indicate the location of the leak. Will
not give a false reading if mechanical
sensing equipment is used. Suitable
for use with most common gases
including compressed air, acetylene,
butane, propane, chlorine, hydrogen
and natural gas.
Product Order Code List Offer
Number
Size
SOL-732 Price/1 Price/1
SL1-400A 400ml -0340K £10.75 £8.60
Leak Detector
Spray
Specially formulated for the rapid
detection of positive pressure gas
leaks. Tested to ensure plastic
and copper pipe compatibility.
Suitable for use with most positive
pressure gas systems.
For use on pipework carrying
natural gas and LPG. Noncorrosive
360°C valve for use in
difficult to reach areas. Meets
the requirements of
EN14291:2004.
Product Aerosol Order Code List Offer
Number Size ROC-770 Price/1 Price/1
32030 300ml -6716L £11.24 £9.67
Leak Detector
Spray
LDA500
For checking for the most minute
leaks in any gas or air
pressurised systems including
commercial vehicle air brakes
and pressure vessels. Contains
no alcohols or solvents, is not
caustic and contains a rust
inhibitor. Spray directly onto the
suspect area using the extension
tube and examine for bubbling
which will indicate leakage.
Size: 500ml aerosol.
Container
Order Code List Offer
Type
Size
SSF-732 Price/1 Price/1
Aerosol 500ml -3340K £5.45 £4.25
Welders’ Anti-Spatter
Spray
Solvent-based coating applied to
metal before welding. During
welding small blobs of molten
metal fall either side of the weld. These
blobs are called spatter, this
coating is applied before welding
to prevent spatter from sticking
to the metal. CO2 propelled
aerosol. Non-flammable. Siliconefree
and removable with solvents
prior to galvanising or painting.
Product Order Code List Offer
Number
Size
SOL-732 Price/1 Price/1
SW1-400C 400ml -0840K £5.66 £4.53
GROUP
732
3-Part Flaw Inspection System
Fast reliable method for visually inspecting
and spot-checking surfaces of welds, exotic
alloys or standard metals, highly stressed
structural members, critical castings,
shafts, gears, spindles, and any other hard
part where identification of surface flaws is
essential. Detects flaws such as cracks,
pin holes, welding laps and porousness
either during manufacture or on-site.
BIG VALUE
500ml Cans!
Flaw Detector Cleaner Spray
SF1-500B
Quick drying, powerful solvent for cleaning
surfaces prior to testing.
Removes contaminants including oils,
greases and grime.
Product
Number
Size
Order Code List Offer
SOL-732 Price/1 Price/1
SF1-500B 500ml -0240K £14.32 £11.46
Flaw Detector Dye Penetrant
SF2-500B
Highly sensitive red dye, for use when
detecting flaws on metal components under
normal lighting conditions.
Product
Number
Size
Order Code List Offer
SOL-732 Price/1 Price/1
SF2-500B 500ml -0260K £18.26 £14.61
Flaw Detector Developer
SF3-500B
White film to highlight any faults which have
been detected when using Flaw Detector
Penetrant. The product should be removed
using Flaw Detector Cleaner Spray once
cracks have been found and marked.
Product
Number
Size
Order Code List Offer
SOL-732 Price/1 Price/1
SF3-500B 500ml -0280K £16.01 £12.81
Maintenance Welders’
Anti-Spatter Fluid
Reduces the risk of joint
puddling and greatly
reduces preparation
time prior to final painting.
Does not affect any
subsequent galvanising or
painting operations.
Evaporates under normal
weld temperatures.
Dichloromethane and silicone-free.
Non-flammable, non-toxic, non-corrosive and
biodegradable.
Order Code
Size
List Offer
SOL-732 Price/1 Price/1
5ltr -9300K £6.44 £5.15
20ltr -9310K £22.79 £18.23
Page1263
Lubricants & Chemical Products