Product Catalog - Grindwell Norton
Product Catalog - Grindwell Norton
Product Catalog - Grindwell Norton
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Construction <strong>Product</strong>s<br />
<strong>Catalog</strong> 2013<br />
We understand your needs better
Clear and dynamic<br />
packaging<br />
• The pack clearly indicates material groups for<br />
which it is most suitable.<br />
• The blade diameter is clearly displayed to avoid<br />
incorrect blade selection<br />
• Do’s amd Dont’s mentioned on each pack point<br />
out correct and appropriate usage of Clipper<br />
Diamond Blades.<br />
• The construction material for which the product<br />
can be used is prominently mentioned along the<br />
product pictogram, to reduce incorrect diamond<br />
blade selection.<br />
<strong>Norton</strong> Diamond Blade - Important Usage Information<br />
www.grindwellnorton.com<br />
DO<br />
Diamond Blades are safe<br />
if used correctly.<br />
• Ensure that the product is suitable for its purpose.<br />
• Disconnect the power to the machine before fitting<br />
the diamond blade.<br />
• Examine all products before mounting and<br />
periodically, for possible defects or damage (core<br />
flatness, fatigue cracks, undercutting, arbor<br />
damage.)<br />
• Check that correct mounting devices are used and<br />
that they are clean, undistorted and free from burrs.<br />
• Always use a correctly designed and adjusted guard<br />
(on the blade and belts).<br />
• Wear appropriate personal protective equipment at<br />
all times.<br />
• Ensure accordance between product direction<br />
arrow/ machine rotation.<br />
Diamond Blades are dangerous,<br />
if abused.<br />
DO NOT<br />
• Use a machine that is not in good working order or one with<br />
defective parts.<br />
• Force the abrasive onto the mounting device or modify the size<br />
of the mounting hole.<br />
• Exceed the maximum operating speed marked on the product.<br />
• Apply shock or excessive force to the product or let it overheat.<br />
• Use mounting flanges which are not clean and flat.<br />
• Tighten the mounting device excessively.<br />
• Start the machine until the guard is in place and fastened<br />
securely.<br />
• Grind material for which the product is not designed.<br />
• Stop the abrasive by applying pressure to its surface. Let it stop<br />
naturally.<br />
• Exceed permissible rotation speeds : refer to values mentioned<br />
on the product.<br />
Safety : The Number 1 Priority for NORTON<br />
Conformity to Safety Regulations: EN13236<br />
• NORTON is one of the first diamond tool manufacturers to comply with Safety and Quality Control<br />
regulations laid by European <strong>Product</strong> Code - EN13236.<br />
• NORTON certifies that all their diamond products fully comply with the requirements of EN13236.<br />
• NORTON strongly advises users not to use products that do not carry the marking of EN13236.<br />
Wear a respirator. Wear eye protection. Read the instructions.<br />
Wear gloves. Wear hearing protection. Not to be used for side grinding.
Professional Blades<br />
Professional Blades - Value for Money<br />
Good value for money laser-welded blade, for wet or dry cutting. Versatile product designed for petrol handheld<br />
saws, floor saws and masonry saws.<br />
<strong>Product</strong><br />
Code<br />
Type Application Size Brand<br />
Dia Bore Height<br />
CP1112 Segmented Marble & Natural Stone 300 50 12 Stone Cut<br />
CP2212 Continuos Rim Tiles and Marble 300 50 10 Stone Cut<br />
CP1114 Segmented Marble & Natural Stone 350 50 12 Stone Cut<br />
CP2614 Segmented Concrete / Asphalt 350 50 10 Concrete Super<br />
CP2814 Segmented Granite 350 50 10 Stone Cut<br />
CPK14C Segmented Concrete / Asphalt 350 50 10 Concrete Super<br />
CPK14G Segmented Granite 350 50 10 Stone Cut<br />
CPK14S Segmented Noise Less 350 50 10 Noiseless Blade<br />
CP1116 Segmented Marble & Stone 400 50 12 Stone Cut<br />
CP2616 Segmented Concrete / Asphalt 400 50 10 Concrete Super<br />
CP2618 Segmented Concrete / Asphalt 450 50 10 Concrete Super<br />
CP2620 Segmented Concrete / Asphalt 500 50 10 Concrete Super
Diamond Saw Blades<br />
Segmented Blade<br />
Segmented Blade has number of gullets which help in dirt removal and<br />
smooth cutting of the material. The segments are made up of optimum bond<br />
matrix which hold the diamonds and provide a faster cut rate and a longer<br />
blade life. This general purpose blade is ideal for cutting stones, bricks, blocks,<br />
cured concrete and masonry.<br />
Continuous Rim Blade<br />
Continuous Rim Blade is used to produce chip-free, clean cuts on a variety of<br />
hard, ceramic materials. The high quality diamond provide for a faster cut-rate<br />
and a longer blade life. The consistent diamond distribution and concentration<br />
combined with high-quality steel core reduces distortion at high operating<br />
temperatures, reduces the vibration and thus provide high performance.<br />
<strong>Product</strong> Application Size Color Brand<br />
Code<br />
Dia Bore Height<br />
CP1104 Natural Stones 105 20 8 Stone Cut<br />
CP2804 Granite 110 20 7.5 Clipper<br />
CP2904 Granite 110 20 9 Clipper<br />
CP8868 Granite and Concrete 110 20 9 Star<br />
CP1145 Granite/ Marble / Concrete 110 20 10 Samrat<br />
CP1140 Marble & Granite 110 20 10 Bear<br />
CP114A Granite / Marble / Concrete 110 20 10 Atlas<br />
CP2704 Marble and Granite 110 20 9 Clipper<br />
CPM004 Marble and Granite 110 20 7.5 Atlas<br />
CP1259 Marble and Granite 125 20/22.23 9 Samrat<br />
CP1549 Marble & Granite 154 20/22.23 9 Samrat<br />
CP1810 Marble & Granite 180 20/22.23 10 Samrat<br />
CP1010 Marble & Granite 250 22.23/25.4 10 Samrat<br />
www.grindwellnorton.com<br />
<strong>Product</strong> Application Size Color Brand<br />
Code<br />
Dia Bore Height<br />
CP8005 Marble and Granite 80 20 5 Stone Cut<br />
CP105C Tiles and Marble 105 20 5 Stone Cut Rim<br />
CP2204 Marble and Granite 105 20 5 Star Cut Rim<br />
CP2268 Granite and Concrete 110 20 9 Star Rim<br />
CP224A Tiles and Marble 110 20 10 Atlas<br />
CPM224 Marble and Granite 110 20 5 Atlas<br />
CP2724 Marble and Granite 110 20 9 Clipper<br />
CP2240 Tiles and Marble 110 20 10 Bear+<br />
Turbo and Thin Turbo Blades<br />
Sinter Turbo Blade combines the advantages of both Continuous Rim<br />
and Segmented Rim blade in cutting of bricks, blocks, tiles, concrete and<br />
masonry materials. Designed for fast cutting with less chipping, better<br />
cooling and excellent dust removal.<br />
<strong>Product</strong><br />
Code<br />
Turbo Blades<br />
Application Size Color Brand<br />
Dia Bore Height<br />
CP4068 Granite and Concrete 110 20 9 Star Turbo<br />
CPM404 Marble and Granite 110 20 7.5 Atlas<br />
CP2744 Marble and Granite 110 20 9 Clipper<br />
CP4040 Marble and Granite 110 20 10 Bear+<br />
Thin Turbo Blades<br />
CP117T Marble and Granite 110 20 9 Samrat
Flat Diamond Wheels<br />
Diamond Flat Wheels are mainly one-sided wheels used for calibrating,<br />
leveling, smoothing and sculpturing stones to adjust thickness and<br />
flatness of stone slabs and are featured with high removal, low noise and<br />
long life.<br />
<strong>Product</strong><br />
Code<br />
Size<br />
Dia Bore Height<br />
Brand<br />
CPM4F 105 20 8 Continuous<br />
CPM4FT / CPZ4FT 105 20 8 Turbo<br />
Cup Wheels<br />
Diamond Cup Wheels are mainly used for buffing, beveling,<br />
smoothing and sculpturing stones. Cup Wheels are designed<br />
for wet and dry grinding on concrete, brick, blocks, mediumto-hard<br />
stone and masonry.<br />
<strong>Product</strong><br />
Code<br />
Segment<br />
Diameter Bore Height Type<br />
CPX8s 80 20 10 Segmented<br />
CPX8c 80 20 10 Turbo<br />
CPX10s 100 20 10 Segmented<br />
CPX10c 100 20 10 Turbo<br />
Tuck Points<br />
Univeral Dry and Wet cutting Tuck Point Blades are used for making<br />
grooves on the surface of the construction materials and repairing<br />
grout, cleaning and routing cement morton joints. Thicker segments<br />
provide a faster cut-rate and longer blade life used for cutting green<br />
concrete, joints of bricks or blocks, masonry or granite.<br />
Available in 4” and 8” diameter Diamond Segmented Blades in<br />
5.5 mm segment thickness.
Wood Cutter Blades<br />
TCT Circular Saw Blade for wood<br />
cutting is a specially designed<br />
multipurpose diamond blade ideal<br />
for rip and crosscut application<br />
suitable for both hardwood and<br />
softwood. Its directional cut does<br />
not allow the wood dust and heat<br />
to accumulate, thereby giving a<br />
smooth and comfortable cut.<br />
Their sharp and tall teeth<br />
arrangement helps in fast, smooth<br />
and comfortable cutting for all<br />
wood cutting applications.<br />
www.grindwellnorton.com<br />
<strong>Product</strong><br />
Code<br />
Size<br />
Dia Bore Teeth<br />
Type<br />
CP416 110 20 16 Clipper Woodcutter<br />
CP430 110 20 30 Clipper Woodcutter<br />
CP440 110 20 40 Clipper Woodcutter<br />
CP440R 110 20 40 Clipper Woodcutter<br />
CP440A 110 20 40 Atlas Woodcutter<br />
CP440B 110 20 40 Bear Woodcutter<br />
CP440C 110 20 40 Clipper Woodcutter<br />
CP440T 110 20 40 Ultra Thin<br />
CP530 125 20 30 Clipper Woodcutter<br />
CP540 125 20 40 Clipper Woodcutter<br />
CP540A 125 20 40 Atlas Woodcutter<br />
CP540B 125 20 40 Bear Woodcutter<br />
CP540C 125 20 40 Clipper Woodcutter<br />
CP640 150 20 / 22.23 40 Clipper Woodcutter<br />
CP740 180 22.23/25.4 40 Clipper Woodcutter<br />
CP760 180 22.23/25.4 60 Clipper Woodcutter<br />
CP1840 180 22.23/25.4 40 Clipper Woodcutter<br />
CP1860 180 22.23/25.4 60 Clipper Woodcutter<br />
<strong>Product</strong><br />
Code<br />
Size<br />
Dia Bore Teeth<br />
Type<br />
CP2040 200 22.23 / 25.4 40 Clipper Woodcutter<br />
CP2060 200 22.23 / 25.4 60 Clipper Woodcutter<br />
CP2080 200 22.23 / 25.4 80 Clipper Woodcutter<br />
CP2540 250 22.23 / 25.4 40 Clipper Woodcutter<br />
CP2560 250 22.23 / 25.4 60 Clipper Woodcutter<br />
CP2580 250 22.23 / 25.4 80 Clipper Woodcutter<br />
CP2510 250 25.4 /30 100 Aluminum Wood Cutting<br />
CP2512 250 25.4 /30 120 Aluminum Wood Cutting<br />
CP3040 300 25.4 / 30 40 Clipper Woodcutter<br />
CP3060 300 25.4 / 30 60 Clipper Woodcutter<br />
CP3080 300 25.4 / 30 80 Clipper Woodcutter<br />
CP3010 300 25.4 /30 100 Aluminum Wood Cutting<br />
CP3012 300 25.4 /30 120 Aluminum Wood Cutting<br />
CP3510 350 25.4 /30 100 Aluminum Wood Cutting<br />
CP3512 350 25.4 /30 120 Aluminum Wood Cutting
Premium<br />
WoodCutter Blades<br />
<strong>Product</strong><br />
Code<br />
Application Size Brand<br />
Dia Bore Teeth<br />
CP430P Woodcutting 110 20 30 Clipper Premium<br />
CP440P Woodcutting 110 20 40 Clipper Premium<br />
CP540P Woodcutting 125 20 40 Clipper Premium<br />
Polishing Pads &<br />
Sponge Wheels<br />
Diamond Polishing Pads &<br />
Sponge Wheels<br />
These Diamond flexible polishing pads are<br />
suitable for shaping and polishing corner angle<br />
and the inside and outside arc of the stone<br />
surface. This Resin bond diamond polishing pads<br />
are made with top quality diamonds and resin.<br />
This is for high gloss finish on all the stones and is<br />
very economical.<br />
These pads are available with colour coded velcro<br />
backing and can be bent or distorted freely and<br />
are available in various mesh / grit sizes.<br />
<strong>Product</strong> Application Size Grit Availability Brand<br />
Code Dia Bore Thickness<br />
CPM Marble and Granite 100 20 2.5 50, 100, 200, 400, 800, 100, 1200, 1500, 2000, 3000 Clipper<br />
CPZ Marble and Granite 100 20 3 50, 100, 200, 400, 800, 100, 1200, 1500, 2000, 3000 Clipper Premium<br />
Diamond Polishing Pads are made available in Grits 5000, 8000 & 12000.
Diamond Core Drill Bits<br />
Diamond Core Drill Bits are used for drilling holes for airconditioned,<br />
water pipe, gas nozzle on the wall and floor and<br />
are also used for drilling wide range of hard to soft materials<br />
with or without steel reinforcing, cured and reinforced<br />
concrete, prestressed concrete, asphalt, brick, block, stone.<br />
<strong>Norton</strong> Diamond Core Bits are designed for fast drilling and<br />
maximum life with no damage on the wall.<br />
Availability<br />
• <strong>Product</strong> Code : CPK –<br />
6, 8, 10, 12, 16, 20, 25, 30, 35, 40, 45 mm Dia.<br />
with a length of 90 mm<br />
• <strong>Product</strong> Code : CPJ –<br />
52, 76, 102, 127, 152 and 200 mm Dia.<br />
with a length of 450 mm<br />
Adaptor can be made available based on requirement.<br />
Glass Cutter Blade<br />
www.grindwellnorton.com<br />
This Electroplated Diamond Glass Saw Blade is designed to give fast,<br />
clean & chip-free cutting of glass and tiles with the smoothest edge<br />
available. This blade is used for cutting hard and ceramic tiles. This<br />
blade has a thin kerf and utilizes a small diamond grit to make your<br />
Glass and Tile Cutting smooth whether on Decorative Glass, Plate<br />
Glass or cutting Glass Tile.<br />
<strong>Product</strong><br />
Code<br />
Type Application Size Brand<br />
Dia Bore Kerf<br />
CPG100 Glass Cutter Tiles and Glass 100 20 1 Clipper<br />
Construction <strong>Product</strong>s Division, Leela Business Park, 5th Level, Andheri-Kurla Road, Mumbai - 400 059. India. Tel: 40212121, 40212168<br />
Field Offices Phone Numbers: • Ahmedabad 66052564-65 • Bangalore 25587248, 25091145, 25585737<br />
• Chennai 28252370/ 0336/ 0797 • Jamshedpur 2228432, 2227337 • Kolkata 40037837-50 • Ludhiana 2423650, 2425851<br />
• Mumbai 40132578-97 • Noida 0120-4061800-99 • Pune 25510891-2-4, 25510876 • Secunderabad 27713040