General catalogue - Fluid Materials
General catalogue - Fluid Materials
General catalogue - Fluid Materials
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
M22 G HPA<br />
M22 SPRAY GUNS<br />
1 2 3 4 5 6 7<br />
<br />
<br />
FEATURES<br />
New ergonomics and body design<br />
Reduced trigger effort<br />
<br />
Unique aircap design<br />
<br />
E-Z adjust aircap<br />
Reduced number of components<br />
Choice of two 0.6 l cups available<br />
BENEFITS<br />
The gun is part of the operator's arm who can focus<br />
on the application and the spraying movement for an<br />
improved quality<br />
Compatible with water-based materials<br />
<br />
Fine control of the needle tightening torque for an<br />
improved sealing<br />
Allows adjustment without loosening the retaining<br />
ring<br />
Easy maintenance<br />
Polyacetal white cup for water and solvent-based<br />
materials<br />
PEHD grey cup for pre-catalysed or PU materials<br />
SPECIFICATIONS<br />
Sprayed materials<br />
Varnishes, lacquers, stains, polyurethans,<br />
two-component<br />
Body of the gun<br />
Anodized Forged Aluminum<br />
Maximum air inlet pressure (bar) 6<br />
Recommended atomization air pressure (bar) 2 - 4<br />
Air consumption (m 3 /h) 26.5<br />
Weight (with cup) (g) 680<br />
Maximum <strong>Fluid</strong> Temperature (°C) 50<br />
<br />
<br />
Nozzle<br />
Stainless steel<br />
Needle<br />
Stainless steel<br />
Wetted parts<br />
Stainless steel<br />
FITTINGS<br />
Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP)<br />
<strong>Fluid</strong> inlet (gravity cup) -<br />
AIRCAP<br />
EN 5<br />
CONFIGURATION OF THE M22 G HPA GRAVITY<br />
Max <strong>Fluid</strong><br />
viscosity in<br />
CA 4<br />
Projector type<br />
Nozzles<br />
Size (mm)<br />
<strong>Fluid</strong> output<br />
(cc/mn)<br />
Fan width<br />
at 20 cm (cm)<br />
Cup<br />
Part number<br />
- - - - - Polyacetal 0.6L (White) 136.135.100<br />
- - - - - PEHD 0.6L (Grey) 136.136.100<br />
12 EN 5 1.2 137 21.5<br />
Polyacetal 0.6L (White) 136.135.101<br />
PEHD 0.6L (Grey) 136.136.101<br />
< 20 s<br />
13 EN 5 1.3 173 23.5<br />
Polyacetal 0.6L (White) 136.135.102<br />
PEHD 0.6L (Grey) 136.136.102<br />
14 EN 5 1.4 234 27.5<br />
Polyacetal 0.6L (White) 136.135.103<br />
PEHD 0.6L (Grey) 136.136.103<br />
20 - 40 s<br />
15 EN 5 1.5 256 30<br />
Polyacetal 0.6L (White) 136.135.104<br />
PEHD 0.6L (Grey) 136.136.104<br />
18 EN 5 1.8 282 31<br />
Polyacetal 0.6L (White) 136.135.105<br />
PEHD 0.6L (Grey) 136.136.105<br />
> 40 s 22 EN 5 2.2 300 32<br />
Polyacetal 0.6L (White) 136.135.106<br />
PEHD 0.6L (Grey) 136.136.106<br />
18