product list - Texas Knifemaker's Supply

PRODUCT LIST 

Texas Knifemaker’s Supply 2009 

A 

Abrasive Materials.....30,32,34-37 

Acrylester..................................17 

Adhesive, Spray........................36 

Amber, Alternative.....................12 

Amber, Copal Beads.................12 

Anvils..........................................5 

Arkansas Stone.........................30 

Apron........................................27 

Awl-Leather...............................46 

B 

Bader Grinders..........................33 

Baldor Buffers...........................36 

Bandsaw Blades.........................9 

Belt Cleaner..............................36 

Belt Grinder...............................33 

Belt Sanding Equipment......32-33 

Belts.....................................34-35 

Blades..................................49-77 

Blade Kits.............................49-61 

Blesbok.....................................22 

Blue Layout Fluid Spray.........2,25 

Blueing Supplies.......................24 

Bolsters................. 11,58,60-63,66 

Bolts, Handle............................. 11 

Bone (Jigged and Picked).........22 

Bone (Natural, Smooth).......22,23 

Books...............25,31,39-41,46,78 

Boot Clips..................................28 

Bowie Blades............................68 

Brass Barstock & Rod.................7 

Brass Black...............................24 

Brass Sheet, & Tubing................7 

Brush, File Cleaning..................28 

Buffers.......................................36 

Buffing Compound..........32,36-37 

Buffing Wheels..........................37 

Buffing Wheel Rake..................36 

Burrs.........................................29 

Bushings, Arbor.........................36 

Bushings, Pivot.........................54 

C 

Calipers.....................................28 

Camel Bone..............................23 

Camp & Kitchen Blades.......72-76 

Cane & Stick Supplies..............78 

Carbide Drill Bits.........................9 

Carbide Taper..............................9 

Carbide Scribe..........................28 

Carbon Damascus Steel..........3-4 

Carbon Fiber Concealex...........47 

Carbon Steel Blades..69-71,76-77 

Cases for Knives..................48,53 

Cast Iron Spear Point Blade.....77 

Celluloid Sheet Material............16 

Center Punch............................27 

Chicago Screw..........................47 

Cleaners...............................24-26 

Clamps......................................28 

Cobalt Drill Bits...........................9 

Concealex.................................47 

Conchos....................................10 

Contact Wheels.........................33 

Cool Tool II................................24 

Coral (Fire & Tiger)....................20 

Corrosion X...............................24 

Countersink...............................55 

Cryogenic Tempering..................1 

Cutting Edge Majic....................24 

D 

Damascus Blades...........52,69-71 

Damascus (Mosaic Bolsters)......3 

Damascus Barstock.................3-4 

DVD’s...................................41-43 

DeburringTool............................28 

Disc Spray Adhesive.................36 

Display Cases for Knives.....48,53 

Drill Bits.......................................9 

Drill Size Chart..........................28 

Drum Sander Mandrels.............35 

“Dymondwood”.....................14-15 

E 

Ear Muff.....................................26 

Epoxy........................................38 

Epoxy Colorants........................38 

Etching Equipment......................6 

Eye Loupe.................................27 

Eyelets.................................46-47 

Ear Plugs.............................26,32 

F 

Fasteners, Handle..................... 11 

File Guide..................................29 

File Holder.................................29 

Files...........................................29 

Fillet Blades.........................56-57 

Flitz............................................25 

Flux, Flux Brush........................26 

Foil Wrap.....................................6 

Folder Hardware..................54-55 

Folder Knife Pouches................48 

Folder Knife Kits...................49-53 

Forging Steel...............................2 

Forks...............................72,74-75 

G 

G-10.....................................13,17 

Glasses, Safety......................5,26 

Gloves, Heat Treat......................5 

Glue..........................................38 

Graphite Material-Flat Platen......33 

Grinders....................................33 

Grinding Wheel Dia. Chart........33 

Groover, Leather.......................46 

Guards.............10,56,59,60-61,68 

Gun Stock Wax.........................25 

Gun Blue Pen............................24 

H 

Hammers, Blacksmith.................5 

Handle Materials..................12-23 

Hardness Tester..........................6 

Hatchets....................................64 

Head Spinner..............................9 

Heat Absorbing Paste...............26 

Heat Treat Fire Brick Supports....5 

Heat Treat Fork...........................5 

Heat Treat Knife Holders.............5 

Heat Treat Ovens.....................5,6 

Heat Treat Tongs.........................6 

Heat Treating Service.................1 

Hippo Tusks..............................23 

Honing Oil.................................30 

Horn Material............................22 

I 

Imistag......................................22 

Impala Jigged Bone..................22 

Inlace Products.........................17 

Inlay Kit, Liquid..........................17 

Ivory, Alternative........................16 

Ivory, Synthetic..........................16 

J 

Jigged Bone..............................22 

K 

Kitchen & Camp Blades.......72-76 

Knife Blade Kits.....56,58-61,63-65 

Knife Cases..........................48,53 

Knife Grinding Magnet..............33 

Knife Making Steel......................2 

Knife Scribe............................2,28 

Knife Sheaths............................44 

Kydex, Kydex Press.............47,65 

Kydex Eyelets......................46-47 

Kydex Foam..............................47 

Kydex Sheath Material.........47,65 

L 

Laminated Wood..................14-15 

Laminated Blades.....................77 

Lansky Sharpeners...................31 

Lanyards...................................27 

Layout Fluid..............................25 

Leather......................................45 

Leather Cement........................45 

Leather Dyes & Stains..............45 

Leather Knife Cases.................48 

Leather Ring Spacers...............45 

Leather Wheels.........................30 

Letter Opener Blades................75 

Liner Lock Kits.....................50-51 

Loupe (Magnifier)......................27 

Lubricants............................24-26 

M 

Magnetic Pickup........................27 

Mammoth Ivory.........................21 

Mandrels...................................35 

Marine Metal Polish..................26 

Marking Gauge.........................27 

Metal Dust for Inlay...................17 

Metal Prep............................24-26 

Micarta Handle Material............13 

Micarta Rod.................................7 

Micarta Tubing............................7 

Micrometers..............................28 

Miracle Cloth.............................25 

Mokume......................................3 

Mosaic Damascus.......................3 

Mosaic Pins.................................8 

Multi-Tool Belts..........................35 

N 

Neatsfoot Oil.............................45 

Neoprene Handle Material........13 

Nickel/Silver Barstock.................7 

Nickel/Silver Rod.........................7 

Nickel/Silver Sheet......................7 

Nickel/Silver Tubing....................7 

Norwegian Blades.....................77 

O 

O1 Toolsteel................................2 

Oosik.........................................23 

Opti-Visor..................................26 

Ovens, Heat Treat....................5-6 

Optic Rods, Clear.....................7,8 

P 

PaleoBond................................20 

Pearl - White, Gold Lipped, 

Black Lipped, Laminate..........21 

Picked Bone..............................22 

Pin Vise.....................................28 

Pivot Pins..................................55 

Pocket Clip Assembly Kit..........49 

Pocket Clip Blanks....................54 

Polish...................................25-27 

Polishing Cloths...................27,36 

Polyester Pearl..........................16 

Pommels................................... 11 

Punch Plier for Leather.............45 

R 

Reamers.....................................9 

Reconstituted Stone..................16 

Rivets, Handle........................... 11 

Rouge-Polishing Compounds... 37 

Russell Knives..........................76 

S 

Sand Paper (wet-dry)................35 

Sanding Disc-Steel...................36 

Sanding Rings for Mandrels......35 

Sanding Sponge.......................36 

Satin Finish 6” Wheel................36 

Screw Gage..............................27 

Screws, Folder..........................54 

Scribes..............................2,27,28 

Scrimshaw Kits..........................25 

Sealer, Wood...................18,24,26 

Seals, Texas.............................. 11 

Sharpening Equipment........30,31 

Sheaths...........................44,56,57 

Sheep Horn...............................22 

Shop Rolls.................................35 

Snapsets...................................46 

Snap Setters........................46,65 

Solder (Stay-Brite)....................26 

Solingen Blades........................77 

Spacer Material....................12,78 

Spring Material..........................54 

Stabilized Wood........................19 

Stainless Steel Blades.........56-67 

Stainless Steel Cleaner.............25 

Stainless Steel Rod & Sheet.......7 

Stainless Steel Tubing................7 

Standoff (Stainless)...................55 

Step Drills...............................9,55 

Stick & Cane Supplies..............78 

Sting Ray Pouches..............48,53 

Sting Ray Skin..........................45 

Stop Pins...................................54 

Super Glue................................38 

T 

Tang Nuts.................................. 11 

Tap & Tap Wrench.....................55 

Tape, Blue Masking...................38 

Taps............................................9 

Thong Hole Tubing......................7 

Thread Locker...........................55 

Thumb Bob...............................55 

Tiger Stripe Resinwood.............15 

Titanium Sheet............................7 

Tomahawks...............................75 

Torx Wrenches..........................54 

Tuf-Cloth...................................25 

Tuf-Glide Pen............................26 

V 

Videos.............................31,41-42 

Vises.........................................28 

W 

Washers-Nylotron & Bronze......55 

Wart Hog Tusks.........................23 

Water Buffalo .................12,20,78 

Wax...........................................27 

Wheel Rake..............................36 

Wood Handle Material.....18-19,71 

Wool Swabs..............................45 

Z 

Zam......................................32,37

SERVICES 

HEAT TREATING & TEMPERING SERVICES FOR AIR QUENCHABLE BLADES 

aIR QUENCH ONLY-NO OIL QUENCH 

We offer the service of heat treating and tempering of handmade blades in our shop. This service is scheduled for every Tuesday (except on major 

holidays, in which case it will be done on the nearest full workday). Usually all blades are shipped out on the following Tuesday. We can do almost 

any air hardening material as long as we have the instructions or the customer sends them with the blades. Blades must be in our shop by Monday 

at 5:00 PM. We use custom built electric furnaces with digital controls. All air-hardening blades are double wrapped in stainless foil which eliminates 

most of the scale usually encountered in heat treating these items. The small amount of scale or discoloration is usually easily buffed off, but 

occasionally more scale is encountered and heavier buffing is required. Our intent is to temper the blades to a Rockwell “C” hardness of 58 or 59. 

Folder springs will be tempered to 43-45 Rockwell “C” unless otherwise requested. We heat treat and temper only air quenchable steels such as 

440C, 440V, 154CM, ATS34, D2, A2, etc. 

CAT. NO. ITEM PRICE/EACH 

HTT1-7 

Heat Treating & Tempering. 1-7 blades under 10” in overall length……......................….......................................................$5.50 

HTT8 + 

Discount Heat Treating & Tempering on 8 or more blades under 10” overall length......................................................................4.95 

HTT>10” Heat Treating & Tempering. Blade length between 10-20”…………….……..............................................................................10.00 

HTTVAS 

HTTSP 

Heat Treating & Tempering of VASCOWEAR, CRUWEAR, BG42, 420V, CPM10V, etc...............................................................15.00 

Heat Treating & Tempering of Folder Springs and Rockers….….....……................................................................................4.00 

(*Call for pricing for blades over 20” and for other exotic steels) 

SUB-ZERO QUENCH (-305F) 

We are offering Deep Cryogenic Tempering to blades along with our normal heat treating and tempering. This will add one day to the usual heat 

treating and tempering sequence. This service is also available for our factory finished blades. Deep Cryogenic Tempering is a one-time process 

that removes all of the retained austensite (large unstable particles of carbon carbide) from the steel and transforms it to martinsite. Edge holding 

properties are greatly enhanced by this process. When adding this service to heat treating & tempering, blades will usually be shipped out 

on Wednesday of the following week. 

CAT. NO. ITEM........................................................................................................................................................................... PRICE/EACH 

SUBZ Deep Cryogenic Tempering................................................................................................................................................... $4.00 

SUBZOR Deep Cryogenic Tempering Gun Barrel...................................................................................................................... Call for price 

OUR GUARANTEE 

We make every possible effort to give each blade the best combination of hardness and toughness that we can through the proper use of our 

equipment. However, if a blade is damaged due to our handling or equipment malfunction, our liability is limited to the replacement of an equal 

amount of the same steel used in the damaged item. Any further responsibility will not be accepted nor will we be responsible for warpage due to 

unequal grinding of the blade or item. We also reserve the right to refuse any blade that could have serious heat treating or warpage problems we 

could not correct. Non-magnetic stainless steel does not harden. You can check stainless properties with a magnet. 

OUR REQUIREMENTS FOR BLADES 

For information about preparing and shipping blades, please read and fill out the heat treat and cryo form located on the last page of the catalog. 

There are many new products in our 

2009 Catalog. Look for the New! tag. We are a 

full service knifemaking supply business. Just 

about all of the products in our catalog have 

been tested or used in our shop. 

We appreciate your business, and we 

are committed to providing you with the best 

service. Our employees will be glad to help you 

with any knifemaking question. 

We also provide heat treating services, 

and an on-line shopping cart at www.texasknife.com. 

Call us toll-free at 888-461-8632. 

We would like to hear from you. Or, drop by 

and see us at our shop located off of Beltway 8 

West and I-10 in Houston, Texas. 

We would like to thank Houston, Texas 

knifemakers, Bob Merz and Rendon Griffon for 

allowing us to use pictures of their knives on 

our cover. 

The lever lock release automatic folder by 

Rendon Griffin has a stainless Damascus blade 

and bolsters. The blade is 3-1/2” long. The folder 

overall is almost 5”. The handle material is 

made of a dark blue, dyed giraffe bone. You can 

contact Rendon at www.griffinknives.com. 

The “boot shaped” knife by Bob Merz has 

a blade made of ATS-34 steel. The overall length 

is 7-1/2” and the blade is 3-1/4”. Bolsters and 

liners are 303 stainless steel and the liners are 

file worked. The scales are stag jigged bone, 

and the thumb stud inset is red Swarovski 

crystal. Bob’s website is www.merzknives. 

com. 

Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 1

KNIFEMAKING STEEL 

STEEL BARSTOCK & SHEET STOCK 

The steel we presently offer is as it comes from the 

mill and is not precision ground except when indicated 

by a PG after the catalog number. Some sizes 

are pre-sanded to remove mill scale. It is annealed, 

but still needs to be heat-treated and tempered, which 

is a service we offer. (See Services) You may order 

as little as one foot of steel. We do not charge for the 

first cut. For custom cuts on bar stock we charge 

$.50 per cut. PG = PRECISION GROUND 

440C STAINLESS STEEL 

CAT.NO. SIZES IN INCHES PRICE/FOOT 

SS004.....................3/32” x 6” .......................................................$35.40 

SS010.....................1/8” x 1-1/4”..................................................... 8.95 

SS010PG................1/8” x 1-1/4”.....................................................12.95 

SS011.....................1/8” x 1-1/2”..................................................... 9.95 

SS011PG................1/8” x 1-1/2” ....................................................13.95 

SS012.....................5/32” x 1-1/2” ..................................................12.95 

SS015.....................3/16” x 1-1/2” ..................................................13.95 

SS018.....................1/4” x 2”............................................................19.50 

ATS34 STAINLESS STEEL 


SS330.................... 1/8” x 1-1/4”.................................................... $10.95 

SS328.................... 1/8” x 1-1/2”...................................................... 11.50 

SS328PG............... 1/8” x 1-1/2”...................................................... 14.95 

SS329.................... 5/32” x 1-1/2”.................................................... 14.95 

SS331.................... 3/16” x 1-1/2”.................................................... 15.95 

D2 STEEL 


D2001.....................1/8” x 1-1/4”..................................................... $9.50 

D2002.....................1/8” x 1-1/2”..................................................... 10.50 

D2004.....................3/16” x 1-1/2”................................................... 12.95 

CPM high-performance tool and specialty steels 

are premier products of Crucible Specialty Metals 

Division. The process of producing CPM products 

involves gas atomization of pre-alloyed molten steel 

to form powder that is then isostatically compressed 

into 100% dense compacts, which creates among 

other things, extremely uniform carbide distribution. 

This process creates a product that offers improved 

grind ability, toughness, and wear-resistance 

CPM 154 STEEL 

CAT.NO. SIZES IN INCHES PRICE/BAR 

CPM1....................... CPM154 .103/.113” x 1-1/2”X 3’................... $54.95 

CPM2....................... CPM154 .135/.149” x 1-1/2”X 3’..................... 64.95 

CPM3....................... CPM154 .180/.200” x 1-1/2”X 3’..................... 74.95 

PRECISION GROUND O1 TOOLSTEEL 


O1-1........................1/8” x 1-1/4”.................................................... $10.95 

O1-2........................1/8” x 1-1/2”...................................................... 12.95 

O1-3........................5/32” x 1-1/2” ................................................... 14.95 

O1-6........................3/16” x 1-1/4”.................................................... 14.95 

O1-4........................3/16” x 1-1/2” ................................................... 15.95 

O1-5........................1/4” x 2” ........................................................... 20.95 

FORGING STEELS 


1080........................1/8” x 1-1/4” ....................................................$6.95 

1095........................1/8” x 1-1/2” ..................................................... 7.95 

5160........................1/4” x 1-3/4” ....................................................10.95 

HI CONTRAST MATERIAL FOR MAKING DAMASCUS 

Cat. No. TYPE SIZE PRICE/FT 

15N5.................15N20..........058” x 1-1/2” x 12”............................ $4.50 

15N6.................15N20..........065” x 1-1/2” x 12”........................... $4.50 

15N7.................15N20..........095” x 1-1/2” x 12”............................ $6.50 

KNIFEMAKER’S SCRIBE 

CAT. NO. 

PRICE 

SCRIBE1....................................................................................... $29.95 

BLUE LAYOUT FLUID SPRAY 

This blue fluid spray helps in laying out patterns on 

steel and other metals. Also effective as an anti-flux 

plus anti-heat paste. 

NOTE: This product can be shipped 

ground only 

CAT. NO. ITEM PRICE 

BLUE1..........12 oz can....................................$7.95 

Gift Certicates from 

Texas Knifemaker’s 

Supply. Get yours 

today!! 

texasknife.com 

CPM D2 STEEL 

CAT.NO. SIZES IN INCHES PRICE/BAR 

CPM4....................... CPMD2 .103/.113” x 1-1/2”X 3’..................... $54.95 

CPM5....................... CPMD2 .135/.149” x 1-1/2”X 3’...................... 64.95 

CPM6....................... CPMD2 .180/.2” x 1-1/2”X 3’.......................... 74.95 

2 

Texas knifemaker’s supply order on-line www.texasknife.com fax (713) 461-8221

Devin Thomas DAMASCUS 

Ladder 

Reptilian 


MOKUME By Mike Sakmar 

Mokume makes beautiful bolster and/or 

guard material. We stock two bold and 

distinguishing patterns, Raindrop and 

Ladder, made from a couple of combinations 

of copper and brass or copper, brass 

and nickel-silver. The size we stock is 1/8” 

x 1-1/2” but other sizes are available. 

Interested in 3/16” or 1/4” thicknesses 

or other widths? Call us for prices and 

availability. 

LADDER 

RAINDROP 

Fireball 

Shark Tooth 

CAT.NO. Thickness-Width & Pattern PRICE/INCH 

MOK1......................1/8” Thickness X 1-1/2” - Ladder................... $19.00 

MOK2 .....................1/8” Thickness X 1-1/2” - Raindrop................. 19.00 

EGGERLING BOLSTERS - MOSAIC DAMASCUS 

Raindrop 

Stainless Patterns 

LADDER, RAINDROP, SPIROGRAPH, VINES AND ROSES, SHARK 

TOOTH, REPTILIAN, & FIREBALL. Call for availability. 

Carbon Damascus Patterns 

LADDER, RAINDROP, VINES AND ROSES, SHARK TOOTH, REPTIL- 

IAN, & FIREBALL. Call for availability. 

Stainless Patterns 

CAT. NO. Size PRICE /IN 

DTSD1........................... 1/8” x 1-1/4”.............................................$17.50 

DTSD2........................... 5/32” x 1-1/4”............................................ 21.00 

DTSD3........................... 3/16” x 1-1/4”............................................ 25.00 

DTSD4........................... 1/8” x 1-1/2”.............................................. 21.00 

DTSD5........................... 5/32” x 1-1/2”............................................ 25.00 

DTSD6........................... 3/16” x 1-1/2”............................................ 28.00 

Carbon Damascus Patterns 

CAT. NO. Size PRICE /IN 

DTCD7........................... 1/8” x 1-1/4”.............................................$15.00 

DTCD8........................... 5/32” x 1-1/4”............................................ 18.00 

DTCD9........................... 3/16” x 1-1/4”............................................ 21.50 

DTCD10......................... 1/8” x 1-1/2”.............................................. 18.00 

DTCD11......................... 5/32” x 1-1/2”............................................ 21.50 

DTCD12......................... 3/16” x 1-1/2”............................................ 28.00 

EXPEDITED 

SHIPPING 

Spirograph 

If you would like expedited shipping 

of your order, please do the 

following: Call us at our toll-free 

number, 888-461-8632 before 

12 noon, Central Time. Place 

your order and tell us that you 

would like your order to go out 

that day. We will verify that the 

product is in stock and we will 

ship it to you the same day. 

EGMD1 EGMD2 EDMG3 

EGMD4 EGMD5 EDMG6 

The size of each piece is 1-1/8” x 1-3/8” x 1/8”. Made of Nickel and 

Carbon Steel. 

CAT.NO. Thickness & Pattern PRICE/PAIR 

EGMD1...................1/8” Thickness - Leaf.....................................$55.00 

EGMD2 ..................1/8” Thickness - Windmill................................ 55.00 

EGMD3...................1/8” Thickness - Checkerboard....................... 55.00 

EGMD4...................1/8” Thickness - Cross Roads......................... 55.00 

EGMD5...................1/8” Thickness - Tulip...................................... 55.00 

EGMD6...................1/8” Thickness - Diamond............................... 55.00 

MOSAIC DAMASCUS BY CHAD NICHOLS 

X-CALIBER SPIDER WEB WALKER 

RHAMBA 

CIRCUS 

NEMESIS 

The size of each piece is 1-1/8” x 1-1/4” x 1/8”. 

CAT.NO. Thickness & Pattern PRICE/PAIR 

CNMD7...................1/8” Thickness - X-Caliber............................. $49.95 

CNMD8 ..................1/8” Thickness - Spider Web........................... 49.95 

CNMD9...................1/8” Thickness - Rhamba................................ 49.95 

CNMD10 ................1/8” Thickness - Circus................................... 49.95 

CNMD11.................1/8” Thickness - Nemesis............................... 49.95 

CNMD12.................1/8” Thickness - Walker.................................. 49.95 



Chad Nichols Carbon Damascus 

LADDER 

Lizard 

TWIST 

CROC SKIN 

HAILSTORM 

EGGS 

Hirohito 

HAZMAT 

Chad Nichols Carbon Damascus c o n t i n u e d 

CNCD31612TW........... 3/16” x 1-1/2” x12”....Twist pattern...........................$219.95 

CNCD31612CS............ 3/16” x 1-1/2” x12”....Croc Skin pattern.................... 219.95 

CNCD31612HS............ 3/16” x 1-1/2” x12”....Hailstorm pattern..................... 219.95 

CNCD31612EG........... 3/16” x 1-1/2” x12”....Eggs pattern............................ 219.95 

CNCD31612HR........... 3/16” x 1-1/2” x12”....Hirohito pattern........................ 219.95 

CNCD31612HM........... 3/16” x 1-1/2” x12”....Haz Mat pattern....................... 219.95 

CNCD31634LD............ 3/16” x 1-3/4” x12”....Ladder pattern......................... 269.95 

CNCD31634LS............ 3/16” x 1-3/4” x12”....Lizard Skin pattern.................. 269.95 

CNCD31634TW........... 3/16” x 1-3/4” x12”....Twist pattern............................ 269.95 






Chad Nichols Stainless Damascus 

CATALOG NO. DESCRIPTION PATTERN PRICE 

CNCD1814LD.............. 1/8” x 1-1/4” x12”......Ladder pattern........................$144.95 

CNCD1814LS.............. 1/8” x 1-1/4” x12”......Lizard Skin pattern...................144.95 

CNCD1814TW............. 1/8” x 1-1/4” x12”......Twist pattern.............................144.95 

CNCD1814CS.............. 1/8” x 1-1/4” x12”......Croc Skin pattern.....................144.95 

CNCD1814HS.............. 1/8” x 1-1/4” x12”......Hailstorm pattern .....................144.95 

CNCD1814EG............. 1/8” x 1-1/4” x12”......Eggs pattern.............................144.95 

CNCD1814HR............. 1/8” x 1-1/4” x12”......Hirohito pattern.........................144.95 

CNCD1814HM............. 1/8” x 1-1/4” x12”......Haz Mat pattern........................144.95 

CNCD1812LD.............. 1/8” x 1-1/2” x12”......Ladder pattern......................... 174.95 

CNCD1812LS.............. 1/8” x 1-1/2” x12”......Lizard Skin pattern.................. 174.95 

CNCD1812TW............. 1/8” x 1-1/2” x12”......Twist pattern............................ 174.95 

CNCD1812CS.............. 1/8” x 1-1/2” x12”......Croc Skin pattern.................... 174.95 

CNCD1812HS.............. 1/8” x 1-1/2” x12”......Hailstorm pattern..................... 174.95 

CNCD1812EG............. 1/8” x 1-1/2” x12”......Eggs pattern............................ 174.95 

CNCD1812HR............. 1/8” x 1-1/2” x12”......Hirohito pattern........................ 174.95 

CNCD1812HM............. 1/8” x 1-1/2” x12”......Haz Mat pattern....................... 174.95 

CNCD1834LD.............. 1/8” x 1-3/4” x12”......Ladder pattern......................... 209.95 

CNCD1834LS.............. 1/8” x 1-3/4” x12”......Lizard Skin pattern................. 209.95 

CNCD1834TW............. 1/8” x 1-3/4” x12”......Twist pattern............................ 209.95 

CNCD1834CS.............. 1/8” x 1-3/4” x12”......Croc Skin pattern.................... 209.95 

CNCD1834HS.............. 1/8” x 1-3/4” x12”......Hailstorm pattern..................... 209.95 

CNCD1834EG............. 1/8” x 1-3/4” x12”......Eggs pattern............................ 209.95 

CNCD1834HR............. 1/8” x 1-3/4” x12”......Hirohito pattern........................ 209.95 

CNCD1834HM............. 1/8” x 1-3/4” x12”......Haz Mat pattern....................... 209.95 



































4 

LADDER 

ROLL ON 

LADDER.COM 

RAINDROP 

KALIPSO 

CATALOG NO. DESCRIPTION PATTERN PRICE 

CNSD1814LD............. 1/8” x 1-1/4” x 12”........Ladder pattern..................... $159.95 

CNSD1814RD............. 1/8” x 1-1/4” x 12”........Raindrop pattern................... 159.95 

CNSD1814RO............ 1/8” x 1-1/4” x 12”........Roll On pattern...................... 199.95 

CNSD1814KA............. 1/8” x 1-1/4” x 12”........Kalipso pattern...................... 199.95 

CNSD1814LDC.......... 1/8” x 1-1/4” x 12”........Ladder.com pattern............... 199.95 

CNSD1812LD............. 1/8” x 1-1/2” x 12”........Ladder pattern....................... 199.95 





CNSD1834LD............. 1/8” x 1-3/4” x 12”........Ladder pattern....................... 239.95 





CNSD53214LD........... 5/32” x 1-1/4” x 12”......Ladder pattern....................... 169.95 

CNSD53214RD........... 5/32” x 1-1/4” x 12”......Raindrop pattern................... 169.95 

CNSD53214RO.......... 5/32” x 1-1/4” x 12”......Roll On pattern...................... 209.95 

CNSD53214KA........... 5/32” x 1-1/4” x 12”......Kalipso pattern...................... 209.95 

CNSD53214LDC........ 5/32” x 1-1/4” x 12”......Ladder.com pattern............... 209.95 













CNSD31614LRO........ 3/16” x 1-1/4” x 12”......Roll On pattern...................... 274.95 














HEAT TREAT OVENS & SUPPLIES 

PARAGON OVENS 

CAT. NO. 

PRICE 

KM-14D.....................................................................$1275.00 

Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high 

x 14-1/2” deep. Maximum temperature is 2000 degrees. 120 

volts, 10 amps, 1200 watts. Includes complete instructions. 

Approx. shipping weight is 100 lbs. 

CAT. NO. 

PRICE 

KM-24D.....................................................................$1540.00 

Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high 

x 24” deep. Maximum temperature is 2000 degrees. 240 volts, 

7.5 amps, 1800 watts. Includes complete instructions. Approx. 

shipping weight is 140 lbs. 

CAT. NO. 

PRICE 

KM-36D...................................................................................... $1775.00 

Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high x 36” deep. 

Maximum temperature is 2000 degrees. 240 volts, 11 amps, 2700 watts. 

Includes complete instructions. Approx. shipping weight is 190 lbs. 

CAT. NO. 

PRICE 

HTKIT............................$74.95 

Knifemaker’s heat treating kit 

contains 1 pair of hot gloves 

(only for handling objects up to 

400 degrees), 1 heat treating 

fork, 4 knife holders, and 8 fire 

brick supports. 

HEAT TREATING KIT 

HEAT TREATING FORK 


HTFORK................................ Heat Treating Fork.......................... $29.00 

Easily removes knife holders and blocks from the hot furnace. A sliding 

wooden handle allows you the most comfortable position for holding the 

fork. 31” long. 

HEAT TREATING GLOVES 

CAT. NO. 

PRICE 

HTGLOVES............................ $41.00 

For intermittent handling of hot objects 

up to 400 degrees. Sold in pairs. Not 

intended for handling hot blades! 

CAT. NO. 

PRICE 

HTKH...............$10.50 EACH 

High temperature pins pressed 

into a ceramic base. They hold 

the foil wrapped blades on 

edge so that heat can circulate 

around the blade. Sold per 

each knife holder. 

KNIFE HOLDER FOR OVEN 

SAFETY GLASSES FOR HEAT TREATING 

CAT. NO. 

PRICE 

HTSG................................................$19.95 each 

Protect your eyes with firing glasses. They are 

coated to filter infra-red and ultra-violet light and 

also to protect your eyes from heat and glare. 

ANVIL STAND 

ANVIL 

Made in the USA 

All anvils are designed by Dilton Emerson. The anvils are made of 41/40 

tool steel and the entire anvil is heat treated to 48-50c Rockwell. 

CAT. # SIZE PRICE 

ANVL-TR1 100 LB $585.00 

Face - 12-5/8” x 4” 

Horn – 8-1/2” 

Height – 10” 

Base – 8-3/4” x 9” 


ANVL-TR 150 LB $795.00 

Face - 16-3/4” x 4-3/16” 

Horn – 10-3/16” 

Height – 11-3/8” 

Base – 10-3/8” x 9-7/16” 

CAT. # 

PRICE 

ANST-TRH.........................$200.00 

This stand is built to support the 

100, 150 and 200 lb. anvils made 

by Dilton Emerson. 


ANVL-TR2 200 LB $1060.00 

Face - 17-1/2” x 4-1/4” 

Horn - 10-1/2” 

Height - 12” 

Base - 10-1/4 x 12-1/2” 

CAT. NO. PRICE/EA 

HTFIRE...........................$5.00 

Sold per each support. Position 

each firebrick support under the 

knifeholders inside the furnace, 

so that you can slide the fork 

under the holders. 

FIRE BRICK SUPPORTS 

BLACKSMITH HAMMER 

The blacksmith hammer is made by Plumb ® and is available in a 40 oz. 

and 48 oz. weight. The handle is hickory. 


BLAC-2.................................. 40 oz................................................$29.95 

BLAC-3.................................. 48 oz..................................................34.95 


HEAT TREAT OVENS & SUPPLIES 

DIGITAL HEAT TREAT OVEN 

HARDNESS TESTER / FILE SET 

This new, innovative file set provides 

a quick, inexpensive and simple way 

to check material hardness. The files 

are marked with different colored 

handles indicating different hardness 

ranges. The files range from 40 HRC 

to 65 HRC.The file that is able to mark 

the material is the approximate hardness 

of the material. 


HTF................................. FILE SET............................................ $ 144.95 

This is a great oven for the knifemaker. Available only in 240 volt, 13 amps, 

3120 watts. It heats up very fast to the highest temperatures needed for the 

knifemaker. Chamber size is 13-1/2” deep, 10” wide and 6-1/2” high. Available 

in other sizes. See below. Complete with a DIGITAL CONTROLLER. 

Plenty of space to heat-treat and temper almost all blades. Shipping weight 

is 70 pounds. Easy side opening door for quick loading and unloading. 

Complete with two fire bricks to use as holders for your blades. You can slot 

one for holding your blades and slot the other for cooling down outside the 

oven. The ovens have performed nicely for our shop and our customers. 

We use three of these ovens weekly to heat treat your blades. 

Custom size ovens available. Please call for price. 

CAT. NO. SIZE PRICE 

OVEN13..............13-1/2” DEEP, DIGITAL CONTROLLER......... $ 985.00 

OVEN18..............18” DEEP......................................................... 1040.00 

OVEN22..............22” DEEP......................................................... 1095.00 

OVENTHEMO.....THERMOCOUPLER............................................ 39.00 

OVENHEATEL....HEATING ELEMENTS......................................... 48.00 

STAINLESS STEEL FOIL WRAP 

ELECTRO CHEM ETCHING EQUIPMENT 

THE “PERSONALIZER TM ” 

An easy, fast way to etch any metal surface. 12 volt transformer,120V/AC, 

with fuse, 60 Hz. Compact. Basic accessories, cord, applicator, felt pads, 

stencil roll, and electrolyte. Power light. 

CAT/NO. ITEM PRICE 

ETCH1....................THE “PERSONALIZER”............................. $145.00 

Note: There is a $40.00 upgrade fee for International customers. 

THE “PERSONALIZER TM PLUS” 

This foil protects blades when heat-treating. Leaves your blades nearly 

scale free. The foil is available by the roll and measures .002” x 24” x 50’. 

If you don’t want to buy the whole roll, then buy foil by the running foot. 

This is 2 square feet. 


FOIL1................................ 5 FT.................................................... $29.95 

FOIL2................................ 10 FT...................................................... 44.95 

FOIL2................................ 50 FT.................................................... 169.95 

6 

HEAT TREAT TONGS 

These are a necessity for removing hot knives from the oven. With these 

tongs, you can grip one foil packet easily, and remove it from the oven. We 

use them every week when we heat treat blades. Tongs are 23” long. 


TONGS...............Heat Treat Tongs (23”)....................................... $29.95 

More power and speed than the “Personalizer”. Full 18 volt transformer, 

120V/AC, with fuse, 60 Hz. Compact. State of the art SCR control. Basic 

accessories, cord, applicator, felt pads, stencil roll, and electrolyte. Power 

light, and AC/DC light. 

CAT/NO. ITEM PRICE 

ETCH2....................THE “PERSONALIZER PLUS”.................. $225.00 

Note: There is a $40.00 upgrade fee for International customers. 

ETCHING SUPPLIES 


ETCH10..................SCE-10 Electrolyte, Universal....................... $13.95 

Good for most metals. 

ETCH11..................AMC Cleaner...................................................13.95 

ETCH12..................Electrolyte SC-E1 for Alum..............................13.95 

Stainless, and Mild Steel. 

ETCH13..................Stencil Roll.......................................................16.95 

ETCH14..................Package of 15 replacement pads....................13.95 


BARSTOCK, SHEET & ROD MATERIALS 

BRASS 

BRASS BARSTOCK 


BB001........ 1/16” x 1-1/2” x 12”............... $4.25 

BB002........ 1/8” x 3/4” x 12” ..................... 4.95 

BB003........ 1/8” x 1” x 12”......................... 6.95 

BB004........ 1/8” x 2” x 12”....................... 12.95 

BB005........ 3/16” x 3/4” x 12”.................... 5.95 

BB006........ 3/16” x 1” x 12”....................... 7.50 

BB007........ 3/16” x 2” x 12”..................... 13.50 

BB008........ 1/4” x 1/2” x 12”...................... 6.95 

BB009........ 1/4”x 3/4” x 12”....................... 7.50 

BB010........ 1/4” x 1” x 12”....................... 12.50 

BB011........ 1/4” x 2” x 12”....................... 18.00 

BB012........ 5/16” x 1” x 12”..................... 18.00 

BB013........ 3/8” x 3/4” x 12”.................... 12.00 

BB014........ 3/8” x 1” x 12”....................... 14.50 

BB015........ 3/8” x 1-1/2” x 12”................. 22.50 

BB016........ 1/2” x 3/4” x 12”.................... 15.00 

BB017........ 1/2” x 1” x 12”....................... 19.00 

BB018........ 1/2” x 1-1/2” x 12”................. 29.50 

BB019........ 3/4” x 1” x 12”....................... 29.50 

BB020........ 1” x 1” x 12”.......................... 42.00 

BRASS ROD 


BR002........ 1/16” Dia. x 12”..................... $0.65 

BR003........ 3/32” Dia. x 12”....................... 0.95 

BR004........ 1/8” Dia. x 12”......................... 1.15 

BR005........ 5/32” Dia. x 12” ...................... 1.45 

BR006........ 3/16” Dia x 12”........................ 1.60 

BR007........ 1/4” Dia. x 12”......................... 2.10 

BR008........ 3/8” Dia. x 12”......................... 4.50 

BR009........ 1/2” Dia. x 12”......................... 7.95 

BR010........ 1-1/8” Dia. x1/2” POMMEL...... 3.45 

BR0101...... 1-1/8” Dia. x 3/4” POMMEL...... 3.95 

BR011........ 1-1/8” Dia. x 3” ...................... 7.95 

BR012........ 1-1/8” Dia. x 12” .................. 28.95 

BR013........ 1-1/4” Dia. x 1/2” POMMEL...... 4.50 

BR0131...... 1-1/4” Dia. x 3/4” POMMEL...... 4.95 

BR014........ 1-1/4” Dia. x 3” ...................... 9.95 

BR015........ 1-1/4” Dia. x 12”................... 39.95 

BR016........ 1-1/2” Dia. x 1/2” POMMEL...... 6.00 

BR0161...... 1-1/2” Dia. x 3/4” POMMEL...... 6.50 

BR017........ 1-1/2” Dia. x 3” .................... 12.50 

BR018........ 1-1/2” Dia. x 12”................... 44.95 

BRASS SHEET 


BS001 ....... 0.020” x 6” x 12” .................. $6.95 

BS002 ....... 0.020” x 12” x 12” .............. 13.95 

BS003 ....... 0.032” x 6” x 12” ................. 7.95 

BS004 ....... 0.032” x 12” x 12” .............. 17.95 

BS005 ....... 0.040” x 6” x 12” ................. 8.95 

BS006 ....... 0.040” x 12” x 12” ............... 21.95 

BS007 ....... 0.050” x 6” x 12” ................ 12.95 

BS008 ....... 0.050” x 12” x 12” ............... 24.95 

BS009 ....... 0.062” x 6” x 12” ................ 13.95 

BS010 ....... 0.062” x 12” x 12” ............... 27.95 

BS011 ....... 0.090” x 6” x 12” ................. 24.95 

BS012 ....... 0.125” x 6” x 12” ................. 32.95 

BRASS THONG HOLE TUBING 


TU101........3/16” O.D. x 12”.................... $2.25 

TU102........1/4” O.D. x 12”........................ 2.50 

TU103........5/16” O.D. x 12”...................... 2.75 

NICKEL/SILVER 

NICKEL/SILVER BARSTOCK 

CAT. NO. SIZE 

PRICE 

NSB02......3/8” x 3/4” x 12”....................$34.95 

NSB03......1/4” x 3/4” x 12”......................21.95 

NSB04......1/4” x 1” x 12”.........................34.95 

NICKEL/SILVER ROD 18% NI 

CAT. NO. SIZE 

PRICE 

NSR01......1/16” Dia. x 12”...................... $1.75 

NSR02......3/32” Dia. x 12”....................... 2.15 

NSR03......1/8” Dia. x 12”......................... 2.50 

NSR04......5/32” Dia x 12”........................ 3.25 

NSR05......3/16” Dia. x 12”....................... 4.15 

NICKEL/SILVER SHEET: 18% NI 

CAT. NO. SIZE 

PRICE 

NSS01.......0.016” x 6” x 12” (1/64”)......... $7.95 

NSS02.......0.016” x 12” x 12”................... 13.95 

NSS03.......0.020” x 6” x 12”.................... 9.95 

NSS04.......0.032” x 6” x 12”.................... 14.95 

NSS05.......0.040” x 6” x 12”.................... 16.95 

NSS06.......0.064” x 6” x 6” (1/16”).......... 12.95 

NSS07.......0.064” x 6” x 12”.................... 23.95 

NSS09.......0.093” x 6” x 6” (3/32”).......... 18.95 

NSS10.......0.093” x 6” x 12”.................... 39.95 

NSS11.......1/8” x 6” x 6”.......................... 39.95 

NSS12.......1/8” x 6” x 12”........................ 59.95 

NSS13.......1/4” x 6” x 6”.......................... 90.00 

NSS14.......1/4” x 6” x 12”....................... 160.00 

N/S THONG HOLE TUBING 

CAT. NO. SIZE 

PRICE 

TU107....... 1/4”x 12” ............................... $4.50 

TITANIUM 

TITANIUM SHEET: Type 6AL4V 

CAT. NO. SIZE 

PRICE 

TS101.......0.030” x 6” x 12” .................$29.95 

TS103.......0.040” x 6” x 12”.....................39.95 

TS105.......0.050” x 6” x 12” ....................47.95 

TS107.......0.060” x 6” x 12” ....................59.95 

TS109.......0.100” x 6” x 12” ....................96.95 

MICARTA 

MICARTA ROD 

CAT. NO. SIZE 

PRICE 

MIR01...... Black 1/8” Dia. x 12” ............. $ 2.25 

MIR02.......Natural 1/8” Dia. x 12”.............. 2.25 

MIR03.......Black 5/32” Dia x 12” ............... 2.50 

MIR04.......Natural 5/32” Dia x 12” ............ 2.50 

MIR05.......Black 3/16” Dia x 12” ............... 3.00 

MIR06.......Natural 3/16” Dia x 12”............. 3.00 

MICARTA THONG HOLE TUBING 


TU106.......1/4” x 12”............................... $ 2.95 

CLEAR OPTIC RODS 

CAT. NO. SIZE 

PRICE 

CR125...... 1/8” dia. x 12”......................... $0.65 

CR187...... 3/16” dia. x 12”......................... 0.75 

STAINLESS STEEL 

303 STAINLESS STEEL 

BARSTOCK – RED TIP 

CAT. NO. SIZE 

PRICE 

SB001.......1/8” x 1” x 12”......................... $8.50 

SB003.......1/4” x 3/4” x 12”........................ 9.50 

SB004.......1/4” x 1” x 12”........................... 9.50 

SB005.......1/4” x 2” x 12”......................... 17.95 

SB006.......5/16” x 3/4” x 12”.................... 11.50 

SB007.......5/16” x 1” x 12”....................... 12.50 

SB008.......3/8” x 3/4” x 12”...................... 11.95 

SB009.......3/8” x 1” x 12”......................... 14.50 

SB010.......1/2” x 3/4” x 12”...................... 16.95 

SB011.......1/2” x 1” x 12”......................... 19.95 


ROD– RED TIP 

CAT. NO. SIZE 

PRICE 

SR001.......1/16” Dia. x 12”...................... $0.85 

SR002.......3/32” Dia. x 12”........................ 0.95 

SR003.......1/8” Dia. x 12”.......................... 1.15 

SR004.......5/32” Dia. x 12”........................ 1.35 

SR005.......3/16” Dia. x 12”........................ 1.65 

SR006.......1/4” Dia. x 12”.......................... 1.95 

SR007.......1-1/8” Dia. x 1/2” POMMEL.........3.50 

SR0071.....1-1/8” Dia. x 3/4” POMMEL.........3.75 

SR008.......1-1/8” Dia. x 3”......................... 9.95 

SR009.......1-1/8” Dia.x 12”...................... 24.75 

SR010.......1-1/4” Dia. x 1/2” POMMEL.........3.95 

SR0101.....1-1/4” Dia. x 3/4” POMMEL.........4.20 

SR011.......1-1/4” Dia. x 3”....................... 10.95 

SR012.......1-1/4” Dia. x 12”..................... 27.95 

SR013.......1-1/2” Dia. x 1/2” POMMEL.........4.75 

SR0131.....1-1/2” Dia. x 3/4” POMMEL.........5.00 

SR014.......1-1/2” Dia. x 3”....................... 16.95 

SR015.......1-1/2” Dia. x 12”..................... 34.95 


BARSTOCK 

CAT. NO. SIZE 

PRICE 

SB401.......3/16” x 1-1/2” x 12”............... $17.95 

SB402.......1/4” x 1” x 12”....................... 16.95 

SB403.......1/8” x 1” x 12”....................... 13.95 

SB404.......3/8” x 1” x 12”....................... 19.95 

416 STAINLESS STEEL ROD 

CAT. NO. SIZE 

PRICE 

SR401.......3/32” x 12”.............................. $0.85 

SR402.......1/8” x 12”.................................. 0.95 

SR403.......3/16” x 12”................................ 1.50 

304 STAINLESS STEEL SHEET 

CAT. NO. SIZE 

PRICE 

SSS11.......0.032 x 6” x 12” ..................... $6.25 

SSS12.......0.032 x 12” x 12” .................. 9.95 

SSS13.......0.048 x 6” x 12” .................... 8.95 

SSS14.......0.048 x 12” x 12” .................. 14.95 

SSS15.......0.120 x 6” x 12” .................... 17.50 

410 STAINLESS STEEL SHEET 

CAT. NO. SIZE 

PRICE 

SSS41.......0.040 x 6” x 12”.................... $12.95 

SSS42.......0.060 x 6” x 12”...................... 14.95 

304 S.S. THONG HOLE TUBING 

CAT. NO. SIZE 

PRICE 

TU104.......1/4” x 12” ............................... $3.75 


MOSAIC PIN MATERIALS 

MOSAIC PINS BY BARRY POSNER 

METAL METAL 

CAT NO. SIZE OUTSIDE INSIDE PRICE 

MPP10-12...........1/4” X 12”............ BRASS................NS, BRASS....................................$32.50 

MPP10-06 ..........1/4” X 6” ............. BRASS ...............NS, BRASS.................................... 18.00 

MPP11-12 ..........1/4” X 12” ........... BRASS ...............NS, COPPER................................. 32.50 

MPP11-06 ..........1/4” X 6”.............. BRASS ...............NS, COPPER................................. 18.00 

MPP12-12 ..........1/4” X 12”............ BRASS ...............NS, BRASS, COPPER................... 32.50 

MPP12-06...........1/4” X 6”.............. BRASS ...............NS, BRASS, COPPER................... 18.00 

MPP13-12...........1/4” X 12”............ BRASS ...............NS, BRASS, COPPER................... 32.50 

MPP13-06...........1/4” X 6” ............. BRASS ...............NS, BRASS, COPPER................... 18.00 

MPP14-12...........1/4” X 12”............ BRASS ...............NS, BRASS.................................... 32.50 

MPP14-06...........1/4” X 6”.............. BRASS ...............NS, BRASS.................................... 18.00 


MPP15-06...........1/4” X 6”.............. BRASS ...............NS, BRASS.................................... 18.00 

MPP16-12...........1/4” X 12”............ BRASS ...............NS, BRASS, COPPER................... 32.50 

MPP16-06...........1/4” X 6”.............. BRASS ...............NS, BRASS, COPPER................... 18.00 


MPP17-06...........1/4” X 6”.............. BRASS ...............NS, BRASS ................................... 18.00 

MPP31-12...........1/4” X 12”............ SS .......................NS, COPPER................................. 35.50 

MPP31-06...........1/4” X 6”.............. SS........................NS, COPPER................................. 19.95 

MPP32-12...........1/4” X 12”............ SS .......................NS, BRASS.................................... 35.50 

MPP32-06...........1/4” X 6”.............. SS .......................NS, BRASS.................................... 19.95 

MPP50-12...........1/4” X 12”............ NS ......................NS, COPPER................................. 35.50 

MPP50-06...........1/4” X 6” ............. NS ......................NS, COPPER................................. 19.95 

MPP200-12.........1/8” X 12” ........... BRASS................NS.................................................. 19.95 

MPP200-06.........1/8” X 6”.............. BRASS ...............NS ................................................ 10.95 

MPP201-12.........1/8” X 12”............ BRASS ...............NS.................................................. 19.95 

MPP201-06.........1/8” X 6” ............. BRASS ...............NS................................................. 10.95 

MPP400-12.........1/8” X 12 ............ SS .......................COPPER, NS................................. 19.95 

MPP400-06.........1/8” X 6” ............. SS .......................COPPER, NS................................ 10.95 

MPP401-12.........1/8” X 12”............ SS .......................NS, COPPER................................. 19.95 

MPP401-06.........1/8” X 6” ............. SS .......................NS, COPPER................................ 10.95 

MPP402-12.........1/8” X 12”............ SS .......................COPPER........................................ 19.95 

MPP402-06.........1/8” X 6”.............. SS .......................COPPER....................................... 10.95 

MOSAIC PINS BY sheila reed 

METAL METAL 

CAT NO. SIZE OUTSIDE INSIDE PRICE 

MP470B12..............7/32” X 12” ........ BRASS........ BRASS & BLACK.............................$ 21.95 

MP470B6................7/32” X 6” .......... BRASS ..... BRASS & BLACK............................. 12.95 

MP470R12..............7/32” X 12” ........ BRASS ....... BRASS & RED................................. 21.95 

MP470R6................7/32” X 6” .......... BRASS ....... BRASS & RED................................. 12.95 

MP520B12..............7/32” X 12”......... BRASS........ BRASS & BLACK............................. 16.95 

MP520B6................7/32” X 6” .......... BRASS ....... BRASS & BLACK............................ 10.50 

MP520R12..............7/32” X 12”......... BRASS ....... BRASS & RED................................. 16.95 

MP520R6................7/32” X 6” .......... BRASS........ BRASS & RED................................ 10.50 

MP80B12................1/4” X 12” .......... BRASS ....... BRASS & BLACK............................. 26.95 

MP80B6..................1/4” X 6” ............ BRASS ....... BRASS & BLACK ............................ 15.50 

MP80R12................1/4” X 12” .......... BRASS........ BRASS & RED................................. 26.95 

MP80R6 .................1/4” X 6” ............ BRASS........ BRASS & RED................................. 15.50 

MP83-12.................1/4” X 12” .......... BRASS........ BRASS & BLK,WHT,RED................. 28.95 

MP83-6...................1/4” X 6” ............ BRASS........ BRASS & BLK,WHT,RED................. 16.50 

MP81-12 ................1/4” X 12” .......... BRASS........ BRASS & BLK,WHT......................... 28.95 

MP81-6...................1/4” X 6” ............ BRASS........ BRASS & BLK,WHT......................... 16.50 

MP84-12 ................1/4” X 12”........... BRASS........ BRASS & RED,WHT....................... 28.95 

MP84-6...................1/4” X 6” ............ BRASS........ BRASS & RED,WHT........................ 16.50 

Back by popular demand, these are clear acrylic 

rods. They are excellent for a see through illusion 

and they are clearly fun to use. 

CAT. NO. SIZE 

PRICE 

CR125...... 1/8” dia. x 12”......................... $0.65 

CR187...... 3/16” dia. x 12”......................... 0.75 

CLEAR optic RODS 

Pictures of Mosaic pins are not to scale. 

Refer to pictures for patterns only. 

MP470B MP470R MP520B MP520R 

MP80B MP80R MP83 MP84 MP81 

Pictures of Mosaic pins are not to scale. 

Refer to pictures for patterns only. 

8 


DRILL BITS, REAMERS, BAND SAW BLADES 

REAMERS FOR PRECISION HOLES 

These are for perfecting the surfaces inside holes. They are an 

absolute must for precision folder making. 


REM1..............Straight Reamer 3/32” diameter.............................. $8.95 

REM2..............Straight Reamer 1/8” diameter.................................. 9.95 

REM3..............Straight Reamer 1/4” diameter................................ 10.95 

REM4..............Straight Reamer .1885 diameter.............................. 12.95 

TAPERED REAMER 

Great to chamfer holes for peening pins for bolsters and guards. 


REMTA1.................. 3/32” OD........................................................ $17.95 

REMTA2.................. 1/8” OD............................................................ 18.95 

SOLID CARBIDE TAPER 

Great to chamfer holes for peening pins for bolsters and guards. 


DRTAP.................... 1/4” OD.......................................................... $13.95 

SOLID CARBIDE DRILL BITS 

METAL CUTTING BAND SAW BLADES 

Bi-metal blade, cryogenically treated for longer 

life and durabililty. 


BAND1....... 93” x 1/2” x 18 TPI..............$ 59.95 

BAND2....... 64-1/2” x 1/2” x 18 TPI...........49.95 

STEP DRILLS* 

*For bolts and rivets 

These drill bits are designed to drill out holes 

in scales to fit the fasteners and rivets listed 

in the INDEX. 

#1-Use for setting the 600SB, 700SB, and 

800SB bolts and rivets. 

It drills a stepped hole with a 5/32” dia. 

pilot and 5/16” dia. step shoulder. This tool 

makes a tough job easy and makes a square 

shoulder too. 

#2-Use for setting the 300B, 400B, and 

500B hidden bolts. 

It drills a 7/32” dia. pilot and 5/16” dia. 

stepped shoulder. 

#3-Use for setting the 350B, 450B, and 

550B hidden bolts. 

It drills a stepped hole with a 3/16” dia. pilot 

and a 1/4” dia. stepped shoulder. 

COBALT DRILL BITS 

Note: 

These drills are not for drilling 

in metal, but they will drill just 

about any kind of bone, wood, 

or synthetic material used to 

make scales. 


DRST1.................... STEP DRILL #1............................................. $17.95 

DRST2.................... STEP DRILL #2............................................... 17.95 

DRST3.................... STEP DRILL #3............................................... 17.95 


DR009..................................... 1/16”.............................................. $10.95 

DR010..................................... #44 (.086)........................................ 11.25 

DR011..................................... 3/32”................................................ 12.25 

DR012..................................... 1/8”.................................................. 13.75 

DR013..................................... 5/32”................................................ 15.75 

DR014..................................... 3/16”................................................ 17.95 

DR015..................................... 1/4”.................................................. 29.95 

PRECISION TAPS 

These are the taps we recommend for clip assembly, scale assembly, 

liner tapping and repairs. 

TAP080 

TAP256 

TAP1-72 

TAP440 

TAP632 

CAT. NO SIZE PRICE 

TAP080................................. 0-80................................................. $10.95 

TAP172 ................................ 1-72................................................... 10.95 

TAP256................................. 2-56................................................... 10.95 

TAP440................................. 4-40................................................... 10.95 

TAP632 ................................ 6-32................................................... 10.95 


DR003................................... 1/16”..................................................$2.10 

DR#52................................... (0.0635”)(use for 1/16” pinhole)...........2.10 

DR#51................................... (use for pilot holes for 2-56 TAP).........2.10 

DR#50................................... (0.070”)................................................2.10 

DR#47................................... (0.0785”)..............................................2.10 

DR044 .................................. (0.086).................................................2.10 

DR004................................... (0.09375) 3/32”...................................2.10 

DR#41................................... (0.096”) (use for 3/32” pinhole)....................2.10 

DR#40................................... (0.098”)................................................2.10 

DR#31................................... (0.120”)................................................2.10 

DR005 .................................. (0.125”) 1/8”.........................................2.45 

DR#30................................... (0.1285”)(use for 1/8” pinhole).....................2.45 

DR006 .................................. (0.15625”) 5/32”..................................2.75 

DR#21................................... (0.159”)(use for 5/32” pinhole)......................2.75 

DR007 .................................. (0.1875”) 3/16”....................................3.15 

DR#12................................... (0.189”)(use for 3/16” pinhole)......................3.15 

DR#8..................................... (0.199”)................................................3.15 

DR008 .................................. (0.25”) 1/4”...........................................4.45 

HEAD SPINNER 

Will spin round heads on 1/16”, 3/32”,and 

1/8” pinstock. 

CAT.NO. ITEM PRICE 

HSP1...........HEADSPINNER........$15.95 


GUARDS 

TWO BRANCH GUARDS 

TEAR DROP GUARD 

PATTERN GUARDS 

g142-B 

g120-B 

GHKGS 

GTD 

GTD2 

g116-B 

Large two branch are 3-7/8” x 1” x 7/32”. 

Medium two branch are 3-1/2” x 3/4” x 7/32”. 

Small two branch are 2-7/8” x 11/16” x 3/16”. 

CAT. NO. TYPE SIZE PRICE 

G142-B.......BRASS.........Lg.................... $7.50 

G142-NS.....NICK/SIL...... Lg...................... 8.50 

G120-B.......BRASS......... Med................... 6.50 

G116-B........BRASS......... Sm.................... 5.95 

G116-NS.....NICK/SIL...... Sm.................... 7.50 

CONCHOS 

g116-NS 

SINGLE BRANCH GUARDS 

g141 

g121 

g115 

Large single branch are 2-3/4” x 1” x 7/32” 

Med. single branch are 1-7/8” x 7/8” x 7/32” 

Small single branch are 1-3/4” x 11/16” x 3/16” 


G141-B.......BRASS.........Lg.................... $4.95 

G141-NS.....NICK/SIL...... Lg...................... 7.95 

G121-B.......BRASS......... Med................... 4.95 

G115-B........BRASS......... Sm.................... 4.95 

G115-NS.....NICK/SIL...... Sm.................... 6.95 

Texas star, 3D concho. Gold-plated 

star, engraved antique silver plated 

ring, screwback, 3/4 “ diameter. 

Gold star, barbed wire concho. Gold 

-plated star and barbed wire, silver 

plated ring, screwback, 1” diameter. 

CAT. NO ITEM PRICE 

CONCHO1..............1............................... $3.50 

CONCHO2..............1................................. 4.50 

JIM’S BOWIE GUARD 

The GHKGS is a 1-3/4” x 1” wide x 5/16” thick 

sand cast guard. The tang hole is 1/8” wide and 

1/2” long. The brass GTD tear drop guard is 1-3/4” 

long, 1” wide, 1/8” thick with a 5/32” x 3/8” slot. 

The brass GTD2 tear drop guard is 1-3/4” long, 

1” wide, 1/4” thick with a 5/32” x 3/8” slot. 

CAT. NO. TYPE 

PRICE 

GHKGS.....303 STAINLESS ..................$ 8.95 

GTD...........BRASS.....................................5.50 

GTD2........BRASS.....................................7.50 

GMO 

OVAL GUARDS 

G114 

Medium Oval Guards are 2” x 1” x 7/32”. Small 

Oval Guards are 1-5/8” x 11/16” x 1/8”. They 

either come in Brass or Nickel/Silver. 


GMOB.......BRASS.................. Medium... $ 7.50 

GMONS.....NICKEL/SILVER... Medium...... 8.50 

G114B.......BRASS.................. Small.......... 6.50 

G114NS....NICKEL/SILVER... Small.......... 7.50 

PRE-SLOTTED GUARDS 

GKGB125 

GKGB156 

3/8” thick X 3/4” wide X 1-3/4” long. 

CAT. NO. SLOT MATERIAL PRICE 

GKGB125...1/8” X 1.... BRASS..............$ 7.50 

GKGS125...1/8” X 1.... STAINLESS..........7.50 

GKGB156...5/32” X 1.. BRASS................ 7.50 

GKGS156...5/32” X 1.. STAINLESS..........7.50 

CROWNED LUGGED GUARD 

GBGL GBGM GBGS 

GBGS Guard is 2-1/8” long, 5/32” thick, and 

11/16” wide. Slot is 1/2” long and 5/32” wide. 

Brass only. 

GBGM Guard is 2-3/4” long, 13/16” wide, and 

5/32” thick. Slot is 1/2” long and 3/16” wide. 

Brass only. 

CAT. NO. TYPE/SIZE PRICE 

GBGS............ BRASS S GUARD............$9.95 

2-1/8” LONG 

GBGM............ BRASS S GUARD............ 11.95 

2-3/4” LONG 

GBGLBR The two ends of this guard turn toward 

the tip of the blade. The guard is 3-1/8” long, 

15/16” wide, 5/32” thick. Slot is 1-1/4” long and 

3/16” wide. Fits larger blades like BL471 and 

BL148. Brass and N/S. 

CAT. NO. TYPE PRICE 

GBGLBR........BRASS C GUARD..........$15.95 

CROWNED GUARD 

This guard is machined from solid barstock 

1/2” x 1” x 4”. It is made for bowies, fighters, and 

daggers with the crown or raised portion facing 

the rear of the handle. Upper and lower ears 

may be bent slightly and made oval to create a 

really sharp appearance. Also has a machined 

out center to start your work. 


GNCG2B.........BRASS........................... $14.95 

LUGGED GUARD 

Machined from solid barstock 1/2” x 1” x 4” into 

a great guard for those large bowies and fighting 

knives. 


GNLG2B.........BRASS.......................... $14.95 

BOLSTER SET 

Guard available in brass and nickel silver. Fits 

BL720C. 1/4” thick, 3/4” wide, and 4” long. 


GB720.............BRASS............................. $9.95 

GN720.............NICKEL /SILVER............. 15.95 

Guard is machined from brass. 3/4” x 1” x 4” 

long. 


GNCLG2B.......BRASS........................... $18.95 

Molded on top edges and flat on handle,1/4” 

thick X 1-1/4” X 1-1/8”. 


BOBR............BRASS............................... $9.95 

10 


HANDLE FASTENERS, RIVETS, POMMELS 

TEXAS SEALS 

TANG NUTS 

BRASS POMMELS 

TXSEAL1 TXSEAL2 TXSEAL3 

TXSEAL4 TXSEAL5 TXSEAL6 

These seals are available in several different 

sizes and finishes. They are generally used on 

the handle material as an inlay. TXSEAL1. 2. 3. 

4 amd 5 have “The State of Texas” inscribed on 

the surface of the seal. TXSEAL6 has “Texas 

Rangers” inscribed on the surface of the seal. 

The seals are approximately 1/16” thick. 


TXSEAL1.... Gold Finish 7/16”.................$5.00 

TXSEAL2.... Silver Finish 7/16”..................5.00 

TXSEAL3.... Black & Gold Finish 3/4”........8.95 

TXSEAL4.... Black & Silver Finish 3/4”......8.95 

TXSEAL5.... Gold Star on Silver 11/16”.....8.95 

TXSEAL6.... “Texas Rangers” Gold 3/4”....8.95 

200B 

300B 

CORBY FASTENERS 

250B 

350B 

Sold as one bolt plus one nut. Heads are slotted 

1/4” and 5/16” diameter with 7/32” diameter 

shaft. These look like pins when finished. Use 

step drill #3 for the 1/4” and step drill #2 for the 

5/16”. 

CAT. NO. ITEM 

PRICE 

200B.........ALUMINUM 5/16”.................. $2.00 

250B.........ALUMINUM 1/4”...................... 2.00 

300B.........BRASS 5/16”........................... 2.00 

350B.........BRASS 1/4”............................. 2.00 

400B.........STAINLESS STEEL 5/16”........ 2.25 

450B.........STAINLESS STEEL 1/4”.......... 2.25 

500B.........NICKEL/SILVER 5/16”............. 3.50 

550B.........NICKEL/SILVER 1/4”............... 3.50 

SCREW TYPE FASTENERS 

600SB 

700SB 

Sold as one bolt plus one nut. These are probably 

the easiest to use of the bolts. Bolt heads 

are 5/16” diameter with 5/32” diameter threaded 

shafts. Slotted. Use step drill #1. 

CAT. NO. ITEM 

PRICE 

600SB.......BRASS BOLT......................... $1.75 

700SB.......NICKEL/SILVER...................... 2.65 

800SB.......STAINLESS STEEL................. 1.75 

#1 #2 

TN101 TN102 

#1 This little brass nut fits most of the high 

carbon steel hidden tang blades. Threaded 

10/24. It is slotted on one end for tightening up 

the handle. 


TN101.........10mm dia., 8mm tal............. $0.95 

#2 This is the little brass nut that fits the Japanese 

blades that are threaded 10/32 as in blade 

numbers 527, 525, and 452. This one has a slot 

on one end for tightening up the handle. 


TN102..........3/8” dia., 1/4” long.............. $0.95 

LOVELESS FASTENERS 

Sold as one stainless steel screw and two brass 

nuts. Screw is 1-3/16” long and nuts are 5/16” 

diameter. Use step drill #1. When assembled just 

grind off the screw head and whatever is left of 

the other end. You should end up with a stainless 

dot inside a brass ring. 

CAT. NO ITEM PRICE 

BBS1........... 1.......................................... $1.50 

RIVETS 

Sold in a pair of one male part and one female 

part. Brass rivets with 5/16” diameter head and 

5/8” long shaft. Usually for use on kitchen or 

patch knives. Use #1 step drill for correct head 

setting. Nickel/silver rivets have 5/16” diameter 

head and 1/2” long shaft. 

BRASS (5/8” long shaft) 

CAT. NO. PAIR / 1 F,1 M PRICE 

R800R........................... 1......................... $0.16 

R800R50..................... 50.......................... 7.50 

R800R100.................. 100....................... 12.95 

R800R500.................. 500....................... 56.00 

NICKEL/SILVER (1/2” long shaft) 

CAT. NO. PAIR / 1 F,1 M PRICE 

R900R........................... 1 $0.35 

R900R50.................... 50......................... 15.95 

R900R100.................. 100....................... 28.95 

R900R500.................. 500..................... 122.50 

KNIFE SHOWS 

See the shows we will be attending 

at texasknife.com. 

We hope to see you there! 

301 302 303 304 305 

These beautiful brass pommels have a center 

drilled base threaded with a 1/4” x 20 tap. 


POM301......BRASS POMMEL............. $10.95 

POM302......BRASS POMMEL............. 10.95 




POMMELS 1” DIA. 

These solid pommels are not tapped. They 

have a 1” diameter base. The pointed pommel 

is 1-1/8” in height. The oval pommel is 3/4” in 

height and the ball pommel is 1-1/8” in height. 


POM153......BRASS POINTED......................$9.95 

POM154......BRASS OVAL...............................9.95 

POM155......BRASS BALL...............................9.95 

POM163......NICKEL/SILVER POINTED.......12.95 

POM164......NICKEL/SILVER OVAL.............12.95 

POM165......NICKEL/SILVER BALL...............12.95 

BRASS POMMELS 

POM203 POM202 POM201 

These brass pommels are precision turned. 

They fit hidden tang blades. (Need 10mm “tang 

nuts”). 


POM201...... SM BRASS POMMEL.........$5.95 

POM202......MED BRASS POMMEL.........6.95 

POM203......LG BRASS POMMEL............7.95 

CAST POMMELS 

POM151 POM152 POM161 POM162 

The large pommel is 5/8” high by 1-1/8” at 

its base tapering to 3/4” at the top. The small 

pommel is 3/8” high by 7/8” diameter at its base 

tapering to 3/4” at the top. 


POM151 ...........BRASS SMALL.............. $4.95 

POM152 ...........BRASS LARGE................ 5.95 

POM161............N/S SMALL...................... 5.50 

POM162............N/S LARGE...................... 5.95 


SPACER MATERIALS 

HIGH TECH PLASTIC SPACER 

Spacer material is made from engraving stock. This material is only .024” 

thick. The colors are super bright and this spacer is waterproof. Colors 

now available are: Yellow, Green, Black, Red, White, and Blue. 

CAT. NO. COLOR SIZE PRICE 

SPR24B..................BLACK............................ 6” x 12”.................... $7.95 

SPR24G..................GREEN........................... 6” x 12”...................... 7.95 

SPR24R..................RED................................ 6” x 12”...................... 7.95 

SPR24W.................WHITE............................ 6” x 12”...................... 7.95 

SPR24Y..................YELLOW......................... 6” x 12” ..................... 7.95 

SPR24BU...............BLUE.............................. 6” x 12....................... 7.95 

5-LAYER SPACER 

This material is available in 0.1” thickness. 

It is five layers of colored material (plastic) 

all laminated together. It is waterproof and 

colorfast. Layers are about .02” thick. Looks 

good on the hidden tang knives. Available in 

sizes and color combinations listed below. 


SPR5LAY1 ...Red-white-black-white-red...............12” x 12” ......... $29.95 

SPR5LAY2 ...Red-white-black-white-red...............6” x 12”.............. 16.95 

SPR5LAY3 ...Red-white-black-white-red...............1-1/2” x 12”.......... 7.95 

SPR5LAY4 ...Black-white-black-white-black..........12” x 12”............ 29.95 

SPR5LAY5 ...Black-white-black-white-black..........6” x 12”.............. 16.95 

SPR5LAY6 ...Black-white-black-white-black..........1-1/2” x 12”.......... 7.95 

3-LAYER SPACER 

This material is available in .100” thickness. 

It is three layers of colored material (plastic) 

all laminated together to save you the time. 

It is waterproof and colorfast. It is available 

in three-color layers of red-white-blue, blackyellow-black, 

and yellow-black-yellow. 

VULCANIZED SPACER 

In sheet form to use under scales and behind guards to enhance the handle 

or to use as fill in as needed. Available in two thicknesses. 

CAT. NO. THICKNESS COLOR SIZE PRICE 

SPR03B........0.02” ....... BLACK.............................6” x 4”................ $0.75 

SPR03W.......0.02” ....... WHITE.............................6” x 4”.................. 0.75 

SPR04B........0.02” ....... BLACK.............................12” x 12” ............. 1.95 

SPR04W.......0.02” ....... WHITE.............................12” x 12”.............. 1.75 

SPR05B........0.03” ....... BLUE...............................6” x 4” ................. 1.00 

SPR05R........0.03” ....... RED.................................6” x 4”.................. 1.00 

SPR06B........0.03” ....... BLUE...............................12” x 12” ............. 2.95 

SPR06R........0.03” ....... RED.................................12” x 12” ............. 2.95 

SPR07R........0.03”........ BRICK RED.....................12” x 12” ............. 2.95 

SPR08R........0.03”........ BRICK,BLK,BRICK..........12” x 12”.............. 2.95 

1/16” 3-LAYER MULTICOLOR SPACERS 

Spacer material is made from engraving stock. The colors are super bright 

and this spacer is waterproof. The total thickness of the spacer is .0625”. 

The center color is approximately .040” thick and the outer colors are 

approximately .011” thick. 


SPR3LAY10............Red-white-red..........................6” x 12”.......... $10.95 

SPR3LAY11............White-black-white.....................6” x 12”............ 10.95 

SPR3LAY12............Black-white-black.....................6” x 12”............ 10.95 

ALTERNATIVE AMBER SPACER 

Amber cylinder that 

measures 1-1/2” 

diameter x 1” thick. 

COPAL AMBER BEADS 

CAT. NO. 

PRICE 

AA01C........................... $5.95 


SPR3LAY1 .......Red-white-blue...................... 12” x 12”................ $29.95 

SPR3LAY2 .......Red-white-blue...................... 6” x 12” ................... 16.95 

SPR3LAY3 .......Red-white-blue...................... 1-1/2” x 12” ............... 7.95 

SPR3LAY4 .......Black-yellow-black................ 12” x 12” ................. 29.95 

SPR3LAY5 .......Black-yellow-black................ 6” x 12” ................... 16.95 

SPR3LAY6 .......Black-yellow-black................ 1-1/2” x 12”................ 7.95 

SPR3LAY7........Yellow-black-yellow............... 12” x 12”.................. 29.95 

SPR3LAY8........Yellow-black-yellow............... 6” x 12” ................... 16.95 

SPR3LAY9........Yellow-black-yellow............... 1-1/2” x 12”................ 7.95 

SPACER PACK 

This spacer pack is particularly handy for beginning 

knifemakers. It consists of a variety of sizes and 

colors and types of spacers that we carry. The pack 

will contain (5) vulcanized spacers approximately 

4” x 6”, (5) high tech plastic spacers approximately 

1-1/2” x 12”, and a mixture of (5) 3-layer and 5-layer 

spacers that are approx. 1-1/2” x 12”. Prepackaged 

in an assortment of colors. We cannot guarantee any 

certain colors or layer configurations. 


SPRPACK1 ............Assorted...................... Assorted.................... $29.95 

12 

WATER BUFFALO THICK SPACERS 

These spacers are 1-1/2” diameter and 

1” thick. Used as a black, natural horn 

spacer, they can really dress up those 

knife handles. 

CAT. NO. AMOUNT PRICE 

WBSP22.............1..........................$3.25 

WBSPDOZ..........DOZEN............... 34.95 

Example of knife with 

COPAL AMBER BEAD 

There are two sizes.The large bead 

measures approx. 1-1/4” x 1-1/2”. The 

small bead measures approx. 1-1/8” 

x 1-1/8”. 

CAT. NO. 

PRICE 

CAB-SM......................$11.95 

CAB-LG....................... 12.95 

NICKEL SILVER & BRASS SPACERS 

These spacers make an excellent color 

contrast on hidden tang knives. They are 

1” in diameter with a 3/16” hole. 

CAT. NO. MATERIAL THICKNESS PRICE 

NBP201................Brass............................... .032........................... $2.50 

NBP202................Brass............................... .047............................. 2.50 

NBP203................Brass............................... .062............................. 2.50 

NSP202.................Nickel/Silver.................... .047............................. 2.50 



WATER BUFFALO SPACERS 

1-1/2” diameter and ¼” thick flat black or red 

button. Sold individually or by the dozen. 

CAT. NO. COLOR AMOUNT PRICE 

WBSP11.......BLACK...... 1...................... $1.50 

WBSP12.......BLACK...... DOZEN........... 16.50 

WBSP13.......RED.......... 1........................ 2.50 

WBSP14.......RED.......... DOZEN........... 27.50 


MICARTA 

SCALES are sold in pairs that are approx. 1-1/2” wide 

x 5” long x thickness indicated in item description. 

PIECES are 5” wide x 12” long x indicated thickness. 

BLOCKS are 1-1/2” wide x 5” long x 1-1/8” thick. 

BLOCK PIECES are 5” wide x 12” long x 1-1/8” thick. 

Normal cutting should produce 4 pairs of scales from a “piece” 

or 8 blocks from a “block piece”. This usually amounts to a 25% 

discount if you buy the pieces and do the cutting yourself. 

PAPER BASED MICARTA 

This Micarta comes in Ivory, Black, and Butterscotch. The “Ivory” Micarta 

resembles ivory in color. It is also a very good material for Scrimshaw 

because its texture does not vary vastly as does the natural material. This 

material does not yellow with age. See inside back cover of the catalog 

for a picture of Micarta. 

CAT.NO. ITEM 

PRICE 

MI001......IVORY MICARTA SCALES1/16” thick..............................$4.00 

MI002......IVORY MICARTA PIECES 1/16” thick..............................14.00 

MI003......IVORY MICARTA SCALES 1/8” thick.................................4.95 

MI004......IVORY MICARTA PIECES 1/8” thick................................17.95 

MI005......IVORY MICARTA SCALES 1/4” thick.................................7.95 


MI007......IVORY MICARTA SCALES 3/8” thick...............................10.95 


MI009......IVORY MICARTA SCALES 1/2” thick...............................12.95 


MI013......BLACK PB MICARTA SCALES 1/4” thick...........................2.95 

MI014......BLACK PB MICARTA PIECES 1/4” thick............................8.95 

MI015......BLACK PB MICARTA SCALES 3/8” thick...........................3.95 

MI016......BLACK PB MICARTA PIECES 3/8” thick..........................10.95 

MI017......BUTTERSCOTCH PB SCALES 3/8” thick..........................5.95 

MI018......BUTTERSCOTCH PB PIECES 3/8” thick.........................16.00 

LINEN BASED MICARTA 

A linen-based material, which is very durable and shows some pattern 

due to the layers of fine cloth. See inside back cover of the catalog for a 

picture of Micarta. 


MI019 .......BLACK LINEN MICARTA SCALES 1/8” thick.................$2.00 

MI020 .......BLACK LINEN MICARTA PIECE 1/8” thick .....................6.50 

MI023 .......BLACK LINEN MICARTA SCALES 1/4” thick ..................4.50 

MI024 .......BLACK LINEN MICARTA PIECE 1/4” thick ...................13.95 

MI025 .......BLACK LINEN MICARTA SCALES 3/8” thick ..................5.95 

MI026 .......BLACK LINEN MICARTA PIECE 3/8” thick ...................17.95 

MI027 .......BLACK LINEN MICARTA BLOCK 1-1/8” thick .................7.95 

MI028 .......BLACK LINEN MICARTA BLOCK PIECE 1-1/8” thick....49.95 

MI029 .......MAROON LINEN MICARTA SCALES 1/8” thick ..............7.95 

MI030 .......MAROON LINEN MICARTA PIECE 1/8” thick ...............21.95 

MI031 .......MAROON LINEN MICARTA SCALES 1/4” thick ............13.50 


MI033 .......MAROON LINEN MICARTA SCALES 3/8” thick ............15.50 


MI035 .......RED LINEN MICARTA SCALES 1/8” thick ......................4.00 

MI036 .......RED LINEN MICARTA PIECE 1/8” thick ........................11.00 

MI037 .......RED LINEN MICARTA SCALES 1/4” thick ......................6.00 

MI038 .......RED LINEN MICARTA PIECE 1/4” thick ......................18.95 

MI039 .......RED LINEN MICARTA SCALES 3/8” thick.......................8.00 

MI040 .......RED LINEN MICARTA PIECE 3/8” thick.........................28.95 

MI041 .......RED LINEN MICARTA BLOCK 1-1/8” thick....................10.50 

MI042 .......RED LINEN MICARTA BLOCK PIECE 1-1/8” thick........62.50 

MI043 .......WHITE LINEN MICARTA SCALES 3/8” thick...................9.95 

MI044 .......WHITE LINEN MICARTA PIECE 3/8” thick.....................34.95 

HANDLE MATERIALS 

CANVAS BASED MICARTA 

Canvas Micarta shows a coarse pattern that resembles canvas. 

CAT.NO. ITEM 

PRICE 

MI045......BROWN CANVAS MICARTA SCALES 3/8” thick............$7.95 

MI046......BROWN CANVAS MICARTA PIECES 3/8” thick.............24.95 

MI047......GREEN CANVAS MICARTA SCALES 3/8” thick...............7.95 

MI048......GREEN CANVAS MICARTA PIECES 3/8” thick..............24.95 

MI051......BLACK CANVAS MICARTA SCALES 3/8” thick................7.95 

MI052......BLACK CANVAS MICARTA PIECES 3/8” thick...............24.95 

FIBER GLASS/PHENOLIC LAMINATE 

This material is a very dense material. Since 

it is a glass fiber product, do not forget to 

wear your respirator. This new material can 

be sawed, drilled, sanded or polished. Ideal 

for light weight folders without bolsters. This 

is tough stuff that is good looking. 

TEX-TUFF 


TXTBL01 ............... 5/32” SCALES BLACK................................... $7.95 

TXTBL02 ............... 5/32” PIECE BLACK....................................... 16.95 

TXTBL03 ............... 1/4” SCALES BLACK....................................... 8.95 

TXTBL04 ............... 1/4” PIECE BLACK......................................... 22.95 

G10 


G10-1S....................BLACK SCALES - 1/8”....................................$3.95 

G10-1P....................BLACK PIECES - 1/8”.....................................10.95 

G10-2S....................BLACKSCALES - 1/4”.......................................4.95 

G10-2P....................BLACK PIECES - 1/4”.....................................20.95 

G10-3S....................ORANGE SCALES - 1/8”...................................6.95 

G10-3P....................ORANGE PIECES - 1/8”..................................19.95 


G109S.....................ORANGE SCALES - 1/4”...................................8.95 

G109P.....................ORANGE PIECES - 1/4”..................................29.95 


G10-5S....................RED SCALES - 1/8”...........................................6.95 

G10-5P....................RED PIECES - 1/8”..........................................19.95 

G10-6S....................RED SCALES - 1/4”...........................................8.95 

G10-6P....................RED PIECES - 1/4”..........................................29.95 

G10-7S....................BLUE SCALES - 1/8”.........................................6.95 

G10-7P....................BLUE PIECES - 1/8”........................................19.95 

G10-8S....................BLUE SCALES - 1/4”.........................................8.95 

G10-8P....................BLUE PIECES - 1/4”........................................29.95 

SOFT GRIP NEOPRENE HANDLES 

Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 13 

G10 

This is a rubber-like material made of neoprene. 

It has a soft warm grip, even in cold 

weather. It works very well as a knife handle 

that is easy to grip when wet. Simply sand 

to shape with 120 grit and hand finish with 

320 grit. DO NOT POLISH! It does not look 

very good. Also, it seems to work best with 

Linen Micarta Rods available in black and tan colors on page 4 . Handles are 

available in 5/16” thickness only. Pieces are 5” x 12”. Pairs are 1-1/2” x 5”. 


NEO1P....................NEOPRENE BLACK PIECE.........................$14.95 

NEO1S....................NEOPRENE BLACK SCALES..........................5.95 

NEOPRENE RUBBER HANDLES 

Originally this neoprene rubber was 

made for horse stalls. Now it is very 

popular as a handle material. The 

material is non-slip and when used 

as a handle material, it makes perfect 

handles for fillet knives, kitchen cutlery, 

and cutting competitions. Dimensions: 

12” long x 5” wide x 3/4” thick. 


NEO2P....................NEOPRENE RUBBER PIECE..................... $19.95

SYNTHETIC HANDLE MATERIALS 

LAMINATED WOODS “DYMONDWOOD” 

Laminated wood is manufactured to produce a very unique material, which 

has the natural beauty of finished wood and still provides a high resistance 

to heat and moisture. Compressed under high pressure, impregnated with 

clear resin, the wood then becomes dimensionally stable. The only finishing 

required is shaping, sanding, and buffing with non-coloring rouge (CAT. No. 

ABR51). Scales come as a pair and are 1-1/2”W x 5”L x 3/8” thick. Pieces 

are 5”W x 12”L x 3/8” thick. 

Dymondwood cylinders are 1-1/2”dia. x 4-1/2” long and make great handles 

for hidden tang type blades. These cylinders are also available in their 

full length of 48”. The 48” cylinders make handsome and durable walking 

sticks. 

COLORS 

AUTUMN CAMO--------------------- BLACK/GREEN/CHERRY 

AGATEWOOD------------------------ NATURAL/COCOBOLO/BLUE 

BLACK---------------------------------- SILVER BLACK 

BRIGHT EARTH--------------------- CHERRY/WALNUT/BLACK 

CAMOFLAGE------------------------- BLACK-1/GREEN-2/WALNUT-1 

CHERRY-------------------------------- BRIGHT RED 

COCOBOLO-------------------------- CINNAMON 

DESERT CAMO---------------------- WALNUT/BROWN/WINEWOOD 

EARTH---------------------------------- WINEWOOD/BROWN/BLACK 

FIELD & STREAM------------------- GREEN/WALNUT/BLACK/BLUE 

GREEN--------------------------------- EMERALD 

KINGSNAKE-------------------------- CHERRY/YELLOW/BLACK 

MAGNUM------------------------------ WINEWOOD/BLK/YEL/COCOBOLO/ 

WALNUT 

OLYMPIC------------------------------- CHERRY/NATURAL/BLUE 

RIO GRANDE-APPLEWOOD---- NATURAL/WALNUT/CHESTNUT 

SPECTRUM--------------------------- BLUE/BROWN/GREEN/BROWN/CHERRY 

WALNUT------------------------------- DARK BROWN 

WINEWOOD--------------------------- RED WINE COLOR 

1 COLOR 

CAT. NO. 

PRICE 

DW102S.............. WINEWOOD SCALES.......................................................$ 3.50 

DW102P.............. WINEWOOD PIECE.......................................................... 10.50 

DW202S.............. BLACK SCALES................................................................ 3.50 

DW202P.............. BLACK PIECE.................................................................... 10.50 

DW302S.............. WALNUT SCALES............................................................. 3.50 

DW302P.............. WALNUT PIECE................................................................ 10.50 

DW402S.............. COCOBOLO SCALES....................................................... 3.50 

DW402P.............. COCOBOLO PIECE........................................................... 10.50 

DW502S.............. BLUE SCALES................................................................... 3.50 

DW502P.............. BLUE PIECE...................................................................... 10.50 

DW602S.............. CHERRY SCALES............................................................. 3.50 

DW602P.............. CHERRY PIECE................................................................ 10.50 

DW702S.............. GREEN SCALES............................................................... 3.50 

DW702P.............. GREEN PIECE................................................................... 10.50 

DW802S.............. TURQUOISE SCALES....................................................... 3.50 

DW802P.............. TURQUOISE PIECE.......................................................... 10.50 

2 COLORS 

CAT. NO. 

PRICE 

DW10S................ WINEWOOD/BLACK SCALES..........................................$ 3.50 

DW10P................ WINEWOOD/BLACK PIECE ............................................. 10.50 

DW11S................ WALNUT/BLACK SCALES................................................ 3.50 

DW11P................ WALNUT/BLACK PIECE.................................................... 10.50 

DW12S................ COCOBOLO/BLACK SCALES.......................................... 3.50 

DW12P................ COCOBOLO/BLACK PIECE.............................................. 10.50 

DW13S................ WINEWOOD/WALNUT SCALES....................................... 3.50 

DW13P................ WINEWOOD/WALNUT PIECE.......................................... 10.50 

DW14S................ WALNUT/CHERRY SCALES............................................. 3.50 

DW14P................ WALNUT/CHERRY PIECE ............................................... 10.50 

DW15S................ YELLOW/BLACK SCALES ............................................... 3.50 

DW15P................ YELLOW/BLACK PIECE.................................................... 10.50 

DW17S................ GREEN-1/WALNUT-2 SCALES ........................................ 3.50 

DW17P................ GREEN-1/WALNUT-2 PIECE............................................ 10.50 

DW18S................ COCOBOLO-2/BLUE-1 SCALES ..................................... 3.50 

DW18P................ COCOBOLO-2/BLUE-1 PIECE.......................................... 10.50 

DW22S................ CHERRY/BLACK - SCALES ............................................. 3.50 

DW22P................ CHERRYBLACK - PIECE.................................................. 10.50 

DW23S................ PURPLE-2/BLACK-1 - SCALES ....................................... 3.50 

DW23P................ PURPLE-2/BLACK-1 - PIECE............................................ 10.50 

DW24S................ PURPLE-2/WALNUT-1 - SCALES..................................... 3.50 

DW24P................ PURPLE-2/WALNUT-1 - PIECE......................................... 10.50 

DW25S................ BLACK/OAK - SCALES..................................................... 3.50 

DW25P................ BLACK/OAK - PIECE......................................................... 10.50 

DW10-WINEWOOD/BLACK 

DW12-COCOBOLO/BLACK 

DW14-WALNUT/CHERRY 

DW17-GREEN-1/WALNUT-2 

DW11-WALNUT/BLACK 

DW13-WINEWOOD/WALNUT 

DW15-YELLOW-BLACK 

DW18-COCOBOLO-2/BLUE-1 

DW22-CHERRY/BLACK 

DW23-PURPLE-2/BLACK-1 

DW102-WINEWOOD 

DW202-BLACK 

14 

DW302-WALNUT 

DW502-BLUE 

DW702-GREEN 

DW402-COCOBOLO 

DW602-CHERRY 

DW802-TURQUOISE 

DW24-PURPLE-2/WALNUT-1 

3 COLORS 

DW25-BLACK/OAK 

CAT. NO. 

PRICE 

DW26S............... RIO GRANDE APPLEWOOD -SCALES.......................... $ 3.50 

DW26P............... RIO GRANDE APPLEWOOD -PIECE............................... 10.50 

DW27S .............. OLYMPIC - SCALES............................................................ 3.50 

DW27P .............. OLYMPIC - PIECE.............................................................. 10.50 

DW28S .............. AGATEWOOD - SCALES................................................... 3.50 

DW28P .............. AGATEWOOD - PIECE..................................................... 10.50 

DW29S .............. BLACK/OAK/CHERRY - SCALES....................................... 3.50 

DW29P .............. BLACK/OAK/CHERRY - PIECE........................................ 10.50 

DW30S .............. EARTH - SCALES................................................................ 3.50 

DW30P .............. EARTH - PIECE................................................................. 10.50 

DW32S .............. BRIGHT EARTH - SCALES................................................. 3.50 

DW32P .............. BRIGHT EARTH - PIECE.................................................. 10.50 



3 COLORS-CONT’D 

DW33S .............. CAMOFLAGE - SCALES ....................................................$ 3.50 

DW33P .............. CAMOFLAGE - PIECE......................................................... 10.50 

DW34S .............. BROWN/BLUE/WALNUT - SCALES..................................... 3.50 

DW34P .............. BROWN/BLUE/WALNUT - PIECE....................................... 10.50 

DW35S .............. CHERRY/BLUE/WALNUT - SCALES................................... 3.50 

DW35P .............. CHERRY/BLUE/WALNUT - PIECE...................................... 10.50 

DW36S .............. KINGSNAKE - SCALES........................................................ 3.50 

DW36P .............. KINGSNAKE - PIECE.......................................................... 10.50 

DW37S .............. YELLOW/BLUE/WALNUT - SCALES.................................... 3.50 

DW37P .............. YELLOW/BLUE/WALNUT - PIECE...................................... 10.50 

DW38S .............. AUTUMN CAMO. - SCALES................................................. 3.50 

DW38P .............. AUTUMN CAMO. - PIECE................................................... 10.50 

DW39S .............. SPECTRUM - SCALES......................................................... 3.50 

DW39P .............. SPECTRUM - PIECE........................................................... 10.50 

DW40S .............. MAGNUM - SCALES............................................................. 3.50 

DW40P .............. MAGNUM - PIECE............................................................... 10.50 

DW41S .............. FIELD & STREAM - SCALES............................................... 3.50 

DW41P .............. FIELD & STREAM - PIECE.................................................. 10.50 

DW42S .............. BLUE/BLACK/WALNUT - SCALES....................................... 3.50 

DW42P .............. BLUE/BLACK/WALNUT - PIECE......................................... 10.50 

DW43S .............. BLUE/BLACK/OAK - SCALES.............................................. 3.50 

DW43P .............. BLUE/BLACK/OAK - PIECE................................................. 10.50 

DW44S .............. DESERT CAMO - SCALES................................................... 3.50 

DW44P .............. DESERT CAMO - PIECE..................................................... 10.50 

MULTI-COLOR CYLINDERS (1-1/2” DIA.) 

4-1/2” CYLINDER 

CAT. NO. 1 COLOR PRICE 

DW102C ........... WINEWOOD - CYLINDER...................................................$ 4.95 

DW202C ........... BLACK - CYLINDER............................................................ 4.95 

DW302C ........... WALNUT - CYLINDER......................................................... 4.95 

CAT. NO. 2 COLORS PRICE 

DW11C .............. WALNUT/BLACK - CYLINDER............................................$ 4.95 

DW15C .............. YELLOW/BLACK - CYLINDER............................................ 4.95 


DW32C .............. BRIGHT EARTH - CYLINDER.............................................$ 4.95 

DW33C .............. CAMOUFLAGE - CYLINDER............................................... 4.95 

DW43C .............. BLUE/BLACK/OAK - CYLINDER......................................... 4.95 

DW41C .............. FIELD & STREAM - CYLINDER.......................................... 4.95 

48” CYLINDER (1-1/2” DIA.) 

CAT. NO. 1 COLOR PRICE 

DW102CFL....... WINEWOOD - CYLINDER...................................................$39.50 

DW202CFL....... BLACK - CYLINDER............................................................ 39.50 

DW302CFL....... WALNUT - CYLINDER......................................................... 39.50 


DW11CFL......... WALNUT/BLACK - CYLINDER............................................$39.50 

DW15CFL......... YELLOW/BLACK - CYLINDER............................................ 39.50 

DW26-RIO GRANDE APPLEWOOD 

DW28-AGATEWOOD 

DW30-EARTH 

DW33-CAMOFLAGE 

DW27-OLYMPIC 

DW29-BLACK/OAK/CHERRY 

DW32-BRIGHT EARTH 

DW34-BROWN/BLUE/WALNUT 


DW32CFL......... BRIGHT EARTH - CYLINDER.............................................$39.50 

DW33CFL......... CAMOUFLAGE - CYLINDER............................................... 39.50 

DW43CFL......... BLUE/BLACK/OAK - CYLINDER......................................... 39.50 

DW41CFL......... FIELD & STREAM - CYLINDER.......................................... 39.50 

TIGER STRIPE RESINWOOD 

Resinwood made from resin impregnated natural wood with beautiful 

depth and color, easy to work, and polish. Available only as scales 

which are 3/8” thick. 

CAT. NO. SINGLE COLOR PRICE 

DW80S................WINEWOOD - SCALES....................................$11.95 

DW81S ...............WALNUT - SCALES.......................................... 11.95 

DW82S ...............COCOBOLO - SCALES..................................... 11.95 

CAT. NO. MULTI COLOR PRICE 

DW83S ............... DESERT CAMO - SCALES...............................$11.95 

DW84S................ RIO GRANDE APPLEWOOD - SCALES.......... 11.95 

DW85S................ BLUE LAGOON - SCALES............................... 11.95 

DW35-CHERRY/BLUE/WALNUT 

DW36-KINGSNAKE 

DW80S WINEWOOD 

DW83S-DESERT CAMO 

DW37-YELLOW/BLUE/WALNUT 

DW38-AUTUMN CAMO 

DW81S-WALNUT 

DW84S-RIO GRANDE APPLEWOOD 

DW39-SPECTRM 

DW41-FIELD & STREAM 

DW43-BLUE/BLACK/OAK 

DW40-MAGNUM 

DW42-BLUE/BLACK/WALNUT 

DW44-DESERT CAMO 

DW82S-COCOBOLO 

DW85S-BLUE LAGOON 

www.texasknife.com 

There is a lot of information on our 

website including new products, items 

on sale, show schedules, a downloadable 

catalog and much more. 



POLYESTER PEARL 

This material is pure plastic (polyester), but looks like mother of pearl. It is available 

in black, white, and other colors. It is very decorative on a set of knives. 

Knives and letter openers look elegant when a white spacer is placed under the 

white poly pearl, and a contrasting spacer is placed between the white spacer 

and the handle. Sands, saws and drills like other materials, and polishes with 

the Jackson 51 white rouge. Scales are sold as a pair and are 1-1/2” wide x 5” 

long x 3/8” thick. Pieces are 5” wide x 12” long x 3/8” thick. 

CAT. NO. ITEM/SIZE PRICE 

POL02P.................WHITE PIECE 3/8”......................................... $30.95 

POL02S.................WHITE SCALES 3/8”.......................................... 8.95 

POL04P.................BLACK PIECE 3/8” .......................................... 30.95 

POL04S.................BLACK SCALES 3/8””........................................ 8.95 

POL10P.................BLACK CHERRY PIECE 3/8” .......................... 30.95 

POL10S.................BLACK CHERRY SCALES 3/8” ........................ 8.95 

POL11P.................COPPER PIECE 3/8” ....................................... 30.95 

POL11S.................COPPER SCALES 3/8” ..................................... 8.95 

POL14P.................EMERALD GREEN PIECE 3/8” ....................... 30.95 

POL14S.................EMERALD GREEN SCALES 3/8” ..................... 8.95 

POL17P.................ABALONE PIECE 3/8” ..................................... 30.95 

POL17S.................ABALONE SCALES 3/8” ................................... 8.95 

POL19P.................SILK BLUE PIECE 3/8” .................................... 30.95 

POL19S.................SILK BLUE SCALES 3/8” .................................. 8.95 

POL20P.................ANTIQUE GOLD PIECE 3/8” ........................... 30.95 

POL20S.................ANTIQUE GOLD SCALES 3/8” ......................... 8.95 

POL22P.................PURPLE PASSION PIECE 3/8” ....................... 30.95 

POL22S.................PURPLE PASSION SCALES 3/8” ..................... 8.95 

POL23P.................FEATHERED MACAW...................................... 30.95 

POL23S.................FEATHERED MACAW........................................ 8.95 

POL26P................. STAR SPANGLED BANNER PIECE 3/8”......... 30.95 

POL26S................. STAR SPANGLED BANNER SCALES 3/8”........ 8.95 

RECONSTITUTED STONE 

The size of each piece is approx. 1/4” x 1-1/2” x 5”. The reconstituted 

stone is sold per piece. 

CAT. NO. COLOR PRICE/EACH 

RECON1.........Turquoise Pattern (Black Web).............................. $12.95 

RECON2.........Malachite (Green).................................................. 12.95 

CELLULOID MATERIAL 

The size of each sheet is approx. 4” X 6”. The scales are 1-1/8” wide x 

4” long x 0.143” thick. 

CAT. NO. COLOR/SIZE PRICE/EA 

CELL1.......................Tortoise Sheet (4” x 6”)................................ $14.95 

CELL3.......................Abalone Sheet (4” x 6”).................................. 14.95 

CELL6.......................Black Lip Snail Sheet (4” x 6”)....................... 14.95 

CELLS9....................Black Lip Snail Scales (1-1/8” x 4”).................. 7.50 

CELLS10..................Abalone Scales (1-1/8” x 4”)............................ 7.50 

CELLS12..................Tortoise Scales (1-1/8” x 4”)............................. 7.50 

POL02 - WHITE 

POL14 - EMERALD GREEN 

Black Lipped Snail Abalone Tortoise 

CELLS9 CELLS10 CELLS12 

ALTERNATIVE IVORY 

POL04 - BLACK 

POL17 - ABALONE 

POL10 - BLACK CHERRY 

POL11 - COPPER 

POL19 - SILK BLUE 

POL20 - ANTIQUE GOLD 

The best looking alternative ivory that we’ve seen. 

CAT. NO. ITEM SIZE PRICE 

ALIVS.................SCALES.................. 5” x 1-1/2” x 3/8”................ $28.95 

ALIVB.................BLOCKS................. 5” x 1-1/2” x 1”................... $28.95 

SYNTHETIC IVORY 

POL22 - PURPLE 

POL23 - FEATHERED MACAW 

Our cylinders are 1-1/2’ in dia. and come in two lengths. The full length is 

23”. The other size we carry is 4-1/2”. 

CAT. NO. ITEM SIZE/INCHES PRICE 

POL10C-4............. BLACK CHERRY............4-1/2”.....................$10.95 

POL10C-22.......... BLACK CHERRY............22-1/2”.....................49.95 

POL04C-4............. BLACK.........................4-1/2”.......................10.95 

POL04C-22.......... BLACK.........................22-1/2”.....................49.95 

POL02C-4............. WHITE........................4-1/2”.......................10.95 

POL02C-22.......... WHITE........................22-1/2”.....................49.95 

POL19C-4............. SILK BLUE...................4-1/2”.......................10.95 

POL19C-22.......... SILK BLUE...................22-1/2”.....................49.95 

POL22C-4............. PURPLE PASSION.........4-1/2”.......................10.95 

POL22C-22.......... PURPLE PASSION.........22-1/2”.....................49.95 

16 

POL26 - STAR SPANGLED BANNER 

POLYESTER PEARL CYLINDERS 

Mastidon Antique White 

Beautiful characteristic swirls and veining make it hard to tell the difference 

between this synthetic ivory and the real thing. 


MAS01...................... 3/16” x 1-1/4” x 3” ............................... $11.95 

MAS02...................... 3/16” x 1-1/4” x 4”.................................. 17.95 

MAS03...................... 1/4” x 1-1/2” x 5”.................................... 24.95 

ANT01...................... 3/16” x 1-1/4” x 3”.................................. 11.95 

ANT02...................... 3/16” x 1-1/4” x 4”.................................. 17.95 

ANT03...................... 1/4” x 1-1/2” x 5”.................................... 24.95 

WHI01..................... 3/16” x 1-1/4” x 3”.................................. 11.95 

WHI02..................... 3/16” x 1-1/4” x 4”.................................. 17.95 

WHI03..................... 1/4” x 1-1/2” x 5”.................................... 24.95 



INLACE ACRYLESTER 

Acrylester is a new material that looks great and drills, sands and polishes 

extremely well. It works down at the same rate as horn, bone and wood. 

Each set of 3/8” scales is cut from a single block producing perfect mirror 

image patterns. The size of each scale is 1-1/2”W x 5”L 3/8”T and each 

block is 1-1/2”W x 5”L x 1”. 

CAT. NO. ITEM PRICE/PR. 

IN01S...................... BRONZE ORANGE SCALES........................ $9.95 

IN01B...................... BRONZE ORANGE BLOCK............................ 8.95 

IN06S...................... BRONZE VIOLET SCALES............................. 9.95 

IN06B...................... BRONZE VIOLET BLOCK............................... 8.95 

IN07S...................... BLACK PEARL SCALES.................................. 9.95 

IN07B...................... BLACK PEARL BLOCK.................................... 8.95 

IN08S...................... WHITE PEARL SCALES.................................. 9.95 

IN08B...................... WHITE PEARL BLOCK.................................... 8.95 

IN09S...................... WHITE & BLACK PEARL SCALES.................. 9.95 

IN09B...................... WHITE & BLACK PEARL BLOCK.................... 8.95 

IN11S...................... BRONZE SCALES........................................... 9.95 

IN11B...................... BRONZE BLOCK............................................. 8.95 

IN12S...................... BLACK VIOLET SCALES................................ 9.95 

IN12B...................... BLACK VIOLET BLOCK.................................. 8.95 

IN13S...................... RED RUSSET SCALES................................... 9.95 

IN13B...................... RED RUSSET BLOCK..................................... 8.95 

IN14S...................... CRUSHED MUDD SCALES............................ 9.95 

IN14B...................... CRUSHED MUDD BLOCK.............................. 8.95 

IN15S...................... Molten Metal.............................................. 9.95 

IN15B...................... Molten Metal.............................................. 8.95 

INLACE LIQUID INLAY KIT 

Inlace is a liquid the consistency of syrup that can be poured into a 

carved, routed or drilled area, allowed to set up and then sanded and 

polished. The 8 oz. kit includes everything needed to finish approx. 60 

feet of 1/8” x 1/8” inlay. It comes in the colors listed below. They can be 

combined with dyes and/or metal dust. 


INKIT1.....................CLEAR........................................................... $29.95 

INKIT7.....................TURQUOISE STONE.................................... 29.95 

INLACE METAL DUST 

This material is a finely ground holographic polyester material that can 

be used with epoxies and super glue to produce a metallic inlay in wood, 

bone, horn or metal. 


IMD1...............DARK BLUE................... 1 OZ. PKG.....................$10.95 

IMD2...............EMERALD GREEN......... 1 OZ. PKG..................... 10.95 

IMD4...............SILVER........................... 1 OZ. PKG..................... 10.95 

IMD5...............GOLD.............................. 1 OZ. PKG..................... 10.95 

IMD6...............TURQUOISE.................. 1 OZ. PKG..................... 10.95 

IMD7...............Maroon........................ 1 OZ. PKG..................... 10.95 

IMD1-DK BLUE IMD2-EMERALD IMD4-Silver 

G10 COMPOSITE 

SILVER TWILL 

CARBON FIBER 

High tech G10 composite. It works well on folders. The dimensions are 

1/8” x 3” x 12”. 


SD3X12................... SILVER TWILL G10...................................... $29.95 

CF3X12................... CARBON FIBER G10..................................... 69.95 

IMD5 Gold IMD6-TURQUOISE IMD7-Maroon 


WOOD HANDLE MATERIALS 

NATURAL WOOD MATERIAL 

All of our woods are selected for their color, 

texture, grain consistency or general 

appearance. We stock mainly hardwoods 

and as we find other suitable woods, we 

will stock them. Scales are always cut 

from one block and taped together to assure 

an exact matching pair. Scales will 

be approximately 1-1/2” x 3/8” x 5” each 

side. Blocks will be approximately 

1-1/2” x 1-1/8” x 5”. 

AMARANTH (PURPLE HEART) 

Purple-violet color, dense-use sealer. 

CAT. NO. DESCRIPTION PRICE 

WOAMS............. SCALES....................... $5.95 

WOAMB............. BLOCKS......................... 5.50 

BOIS D’ARC (OSAGE ORANGE, 

HEDGE, etc.) 

Yellow and hard-use sealer. 


WOBOIS............ SCALES....................... $5.50 

WOBOIB............ BLOCKS......................... 5.00 

COCOBOLO 

Reddish orange with dark stripes, dense, oily 

and hard. Toxic to some people-use sealer. 


WOCOS............. SCALES.......................$6.50 

WOCOB............. BLOCKS.........................6.00 

EBONY (MACASSAR GOLDEN) 

Black with tan irregular streaks, marble effect. 

Hard and dense-use sealer. 


WOEBMS........... SCALES....................... $7.50 

WOEBMB.......... BLOCKS......................... 7.00 

EBONY (GABOON) 

Black with sometimes lighter streaks, very 

dense-use sealer. 


WOEGS............. SCALES....................... $7.50 

WOEGB............. BLOCKS......................... 7.00 

KINGWOOD (PARA) 

Dark purple over black and tan streaks, hard 

and dense-use sealer. 


WOKIS............... SCALES....................... $8.50 

WOKIB............... BLOCKS......................... 8.00 

BOCOTE (CORDIA BARISINA) 

Dark brown with yellow gold stripes and black 

stripes, dense-use sealer. 


WOBOCS........... SCALES....................... $6.50 

WOBOCB.......... BLOCKS......................... 6.00 

BLACK PALM 

Black tubes surrounded by tan. Unusual-use 

sealer. 


WOBPS.............. SCALES...................... $7.50 

WOBPB............. BLOCKS........................ 7.00 

DESERT IRONWOOD 

Nutmeg brown with bold steaks or flecks, very 

dense. 


WOARS..............SCALES..................... $16.00 

WOARB..............BLOCKS...................... 16.00 

DESERT IRONWOOD 

EXHIBITION GRADE 

There are two grades of select. Select 2 has 

more pattern and grain than Select 1. 


WOASE1S..........SCALES..................... $25.00 

WOASE1B..........BLOCKS...................... 25.00 

WOASE2S..........SCALES....................... 40.00 

WOASE2B..........BLOCKS...................... 40.00 

MAPLE (BIRDSEYE) 

Tan with little eyes everywhere. Hard. Looks 

best when stained dark brown-use sealer. 


WOMABS.......... SCALES....................... $5.50 

WOMABB.......... BLOCKS......................... 5.00 

MAPLE (CANADIAN CURLY) 

Tan and chatoyant. Looks best when stained 

dark brown-use sealer. 


WOMCS............. SCALES....................... $4.50 

WOMCB............. BLOCKS......................... 4.00 

BLACKWOOD 

Black with lighter streaks and very dense. Blocks 

are 1 3/8” wide x 1” thick-use heavy sealer. 


WOBLAS............SCALES..................... $11.50 

WOBLAB............BLOCKS...................... 10.95 

BLOODWOOD 

Dark orange with lighter streaks-use sealer. 


WOBLS.............. SCALES....................... $5.50 

WOBLB.............. BLOCKS......................... 5.00 

WOASE1-Select 1 

Gloss SEALER 

This product can be used to seal 

wood, laminated wood, etc. It 

gives a high gloss protective 

coating which dries quickly and 

stays clear. 

WOASE2-Select 2 

These are examples only. Patterns vary. 


GLOSS1............ 11 OZ........................... $9.50 

18 


WOOD HANDLE MATERIALS 

MESQUITE, NATIVE 

Brown to dark pink, dense and very hard. Texas 

wood-use sealer. 


WOMES............. SCALES........................$5.95 

WOMEB............. BLOCKS..........................5.50 

SNAKEWOOD 

Rich looking with dark bars across reddish 

brown background. This wood is very hard and 

looks good. Exhibition grade. 


WOSNS...............SCALES.....................$44.50 

WOSNB..............BLOCKS......................43.50 

TULIP 

Dark and medium pink with nice ivory colored 

streaks, smells great when cut-dense-use sealer. 

Blocks are 1” thick. 


WOTUS.............. SCALES........................$7.50 

WOTUB.............. BLOCKS..........................7.00 

OLIVEWOOD 

Marble tan with dark streaks-use sealer. 


WOOLS.............. SCALES.......................$6.95 

WOOLB............. BLOCKS.........................6.50 

ROSEWOOD (BOLIVIAN) 

Some purple with tan streaks, some black with 

tan, purple with yellow-variable. Dense and 

hard-use sealer. 


WORBS............. SCALES.......................$5.95 

WORBB............. BLOCKS.........................5.50 

ROSEWOOD (EAST INDIAN) 

Dark purple with almost black streaks. Dense 

and oily-use sealer. 


WORES.............. SCALES.......................$5.95 

WOREB............. BLOCKS.........................5.50 

THUYA BURL 

Nice rich brown with lots of eyes and a rich 

cedar type odor, oily-use sealer. 


WOTHS.............. SCALES.....................$25.00 

WOTHB.............. BLOCKS.......................24.50 

WESTERN WALNUT 

Curly and really nice, medium hard gunstock 

wood-use sealer. 


WOWAWS.......... SCALES...................... $6.50 

WOWAWB......... BLOCKS...................... 6.00 

ZEBRA 

Light tan with dark brown stripes-use 

sealer. 


WOZES.............. SCALES....................... $5.50 

WOZEB.............. BLOCKS......................... 5.00 

ZIRICOTE 

Dark gray to black with lighter gray to tan layers, 

scenic type usually, very hard and dense-use 

sealer. 


WOZIS............... SCALES...................... $8.50 

WOZIB............... BLOCKS........................ 8.00 

STABILIZED WOOD-EXHIBITION GRADE 

There are lots of beautiful woods in exotic colors 

to choose from. Blocks are approximately 

1-1/2” x 1” x 5” and scales are approx. 1-1/2” x 

3/8” x 5” and are sold as a pair. These are representative 

samples. The burl and color may vary 

because of variation in the natural wood. BLACK 

ASH and MAPLE BURL (sometimes availabe in blue, red 

MAPLE BURL-SW01 

REDWOOD-SW05 

or green) Call for color availability. 


SW01S.....MAPLE BURL SCALES..............$29.95 

SW01B.....MAPLE BURL BLOCK..................29.95 

SW02S.....BOX ELDER SCALES..................29.95 

SW02B.....BOX ELDER BLOCK....................29.95 

BOX ELDER-SW02 

SW03S.....BLACK ASH BURL SCALES........29.95 

CALIFORNIA BUCKEYE-SW06 

SW03B.....BLACK ASH BURL BLOCK..........29.95 

SW04S.....AMBOYNA BURL SCALES..........29.95 

SW04B.....AMBOYNA BURL BLOCK............29.95 

SW05S.....REDWOOD SCALES...................29.95 

SW05B.....REDWOOD BLOCK.....................29.95 

SW06S.....CAL. BUCKEYE SCALES............29.95 BLACK ASH BURL-SW03 

SPAULTED PECAN-SW07 

SW06B.....CAL. BUCKEYE BLOCK..............29.95 

SW07S.....SPAULTED PECAN SCALES.......29.95 

SW07B.....SPAULTED PECAN BLOCK.........29.95 

SW08S.....SPAULTED MAPLE BURL............29.95 

SCALES 

SW08B.....SPAULTED MAPLE BURL............29.95 

BLOCK 

AMBOYNA BURL-SW04 

SPAULTED MAPLE BURL-SW08 


ORGANIC HANDLE MATERIALS 

WATER BUFFALO HORN SCALES 

These scales are available in 4 

colors; black, black with white 

streaks,honey color, and red with 

black streaks. 

WB HORN TAPER 

CAT. NO. SIZE PRICE/PR 

WBS11...................................3/8” x 1-1/2” x 5” (black)........................................................... $7.95 

WBS13...................................3/8” x 1-1/2” x 5” (select with white)........................................... 9.95 

WBS14...................................3/8” x 1-1/2” x 5” (red).............................................................. 12.95 

WBS15...................................1/4” x 1-1/4” x 4” (honey)........................................................... 6.95 

WATER BUFFALO HORN CARVED 

WATER BUFFALO CYLINDER 

This water buffalo horn taper is 5-1/2” long and 

1-7/8” at the largest end. 


WBTAP.............WB TAPER................... $14.95 

WATER BUFFALO HORN JIGGED 

This carved water buffalo horn scale is graduated 

in color from black at one end to a honey color 

on the other end. Comes as a pair. 


JBH6............... 1-1/2” X 5”..................... $13.95 

WATER BUFFALO STAG CARVED 

1-1/8” diameter x 4-1/2” long cylinder. Black with 

white steaks. 

CAT. NO. ITEM PRICE/EA 

WBCY1........... CYLINDER...................... $7.95 

PALEO BOND TM 

This jigged water buffalo horn scale is a reddish 

brown color. Comes as a pair. 


JBH4............... 1-1/2” x 5”...................... $12.95 

FIRE CORAL 

This water buffalo is black with light brown 

streaks and comes in small and large sizes. 


WBST-SM....... 1-1/4” x 4-1/8”.................$11.95 

WBST-LG........ 1-1/2” x 5”....................... 15.95 

WATER BUFFALO HORN JIGGED 

Honey combed water buffalo horn. Opaque, light 

brown color. Comes as a pair. 


JBH5............... 1-1/4” x 4-1/4”.................$12.95 


ground only) 

Paleo Bond is a great substance to use on fragile 

handle materials.The kit contains 5 viscosities of 

bonding/filling material plus an accelerator and a 

debonder. We use Paleo Bond to stabilize and 

fill gaps when working with fossil ivory and other 

handle materials. If you work with fossil ivory or 

pearl, this kit will pay for itself in a very short 

time. It is the #1 product used in museums for 

preserving fossils. 


PALEO1.............. KIT.............................$64.95 

This material is real coral. It has a rich veined 

pattern. The color is a vibrant flame orange. 


FC01...............1” X 2-3/4”......................$39.95 

TIGER CORAL 

20 

Order on-line 24 hours a day at 

www. texasknife.com 

Convenient, fast and easy. 

This material is real coral from the ocean and 

has a beautiful pattern. A rich tan background 

is laced with stripes in a range of dark brown 

colors. Every pair is unique. 


TIG01................1” X 2-3/4”.................... $44.00 

TIG02................1-1/8” X 3-1/8”................ 64.00 



WHITE MOTHER OF PEARL 

BLACK LIPPED PEARL 

Irridescent and smooth, this 

mother of pearl gives an elegant 

look to your knife. 

In the light, the color of this pearl 

changes from grays and whites to 

medium greens to light reds. They 

are beautifully irridescent. Scales are 

2-5/8” long x 7/8” wide. 


MOP15........ 7/8” x 2-5/8” $49.95 


MOP01.......................... 7/8” x 2-1/2”............................................ $ 24.95 

MOP02.......................... 1” x 3”...................................................... 34.95 

MOP03.......................... 1-1/8” x 3-1/8”.......................................... 44.95 

MOP04.......................... 1-1/8” x 4-1/8”.......................................... 79.95 

GOLD LIPPED MOTHER OF PEARL 

CRUSHED PEARL LAMINATE 

Crushed white pearl laminate. This material is 

a gold color with lots of depth. It catches the 

light and sparkles. The material is stable and 

easy to work. 

Soft, mellow gold color that 

reflects purples, pinks, yellows 

and greens. Absolutely 

stunning! 


MOP14...........1” x 2-3/4” x 1/8”.......... $38.95 

MAMMOTH IVORY 


MOP10..........................1” x 2-5/8”...............................................$ 39.95 

MOP11..........................1-1/8” x 3”............................................... 49.95 

SMOKEY GRAY BLACK LIPPED PEARL 

This pearl is a beautiful, cool, gray color 

which changes from gray to white in 

the light. 


MOP12..............3/4” x 2-5/8”...............$64.95 

Call us toll-free at 

(888) 461-8632 if you have any 

knife making questions. Our 

experienced staff will be glad 

to help you. 

We have a large assortment of mammoth ivory colors and sizes. Our sizes 

vary from 1” x 3” up to 1-3/8” x 4”. Please call us toll-free at 888-461-8632 

and we will be happy to tell you what we have in stock, and give you a 

description and price over the phone. 



IMPALA JIGGED BONE 

WORM GROOVED BONE 

Black dyed bone which is nicely 

carved to look like natural impala 

horn. 

Beautiful, amber dyed, worm 

groved cow bone. It is very natural 

looking. 1/8” thick. 


PBS4.............................4-1/4” x 1-3/8”.......................................... $18.95 

IMISTAG 

Imitation stag antler 

jigged from cow bone. 


WGB1........................... 1-1/8” x 4” ............................................... $10.95 

WGB2........................... 1-1/2” x 5”.................................................. 14.95 

SHEEP HORN 

Asian Ram. 

CAT. NO. ITEM SIZE PRICE/PR 

IMI01...................SCALES......................1-1/4” x 4-1/2”................$10.95 

IMI02...................SCALES......................1-1/2” x 5”....................... 13.95 

PICKED BONE 


SHP01........... 1-3/8” x 4-1/2”...........$37.95 

SHP02........... 1-1/4” X 4”................. 29.95 

SHP03........... 1-1/4” X 3-1/2”........... 19.95 

STAG JIGGED BONE 

Made from cow shin bone and dyed 

an amber color. This is an excellent 

choice for folders and has a jigged pattern 

similar to stag. Now comes with 

radius. Dimensions are 4-1/4” long x 

1-1/4” wide. 

CAT. NO. 

PRICE/PR 

PBS6.......................................$17.95 

BLESBOK 

Example of Red after light buffing. 

CAT. NO. SIZE COLOR PRICE/PR 

PB01B...............1” x 3”........................... BROWN........................... $9.95 

PB01G...............1” x 3”........................... GREEN.............................. 9.95 

PB01R...............1” x 3”........................... RED................................... 9.95 

PB02B...............1-1/8” x 4-1/8”.............. BROWN........................... 12.95 

PB02G...............1-1/8” x 4-1/8”.............. GREEN............................ 12.95 

PB02R...............1-1/8” x 4-1/8”.............. RED................................. 12.95 

PB02BLU...........1-1/8” x 4-1/8”.............. BLUE............................... 12.95 

Irregular jigging looks like 

stag and is dyed an orange/ 

brown color that is very effective 

and looks great. 

STAG JIGGED BONE 

Example of Green after buffing. 

SMOOTH BONE NATURAL COLOR 

A natural color bone that has 

not been dyed. This a good 

bone to practice your scrimshaw 

skills on. 

Really nice looking 

horns, 10” to 15” long, 

open end varies, but 

the average is 1-1/2” x 

2”. It has good rings and 

is fairly thick on large, 

polished horns. Many 

are nicely streaked with 

lighter colors. 


BLESBOK..................... VARIES....................................................$24.95 


PBST1.......... 1” x 3”.........................................................................$9.95 

PBST2.......... 1-1/8” X 4-1/8”............................................................14.95 


PBNA1............1” x 3”....................................................................... $8.50 

PBNA2............1-1/4” x 4-1/8”.......................................................... 10.50 

22 



WART HOG TUSKS 

CAMEL BONE DYED 

Small, medium and large. 9” -12” long. Great for making 

hidden tang knives, walking sticks, etc. Each tusk is sold by 

weight. Please call for price. (Price range is $25 - $50) 


WH1.........................Small 9” to 10”.................................. Call for Price 

WH2.........................Medium 10-1/2” to 11-1/2”................ Call for Price 

WH3.........................Large 12” and over........................... Call for Price 

HIPPO TUSKS 

Camel bone comes in beautiful colors and is stabilized. It is a distinctive 

handle material and is durable and easy to work. We have many colors 

to choose from. Minimum size is 1-1/4” x 4-1/2”. 

Call for colors or order on-line and tell us what colors you prefer. 

CAT. NO. ITEM PRICE/PR 

CB02...................................1-1/4” x 4-1/2”................................... $30.00 

CAMEL BONE NATURAL 

Small, medium, and large 10”-16” long, great to slab out 

for folders, full tang knives. Each tusk is sold by weight. 

Please call for price. (Price range is $50 - $175) 


HIPPO1....................Small 10” to 12”................................ Call for Price 

HIPPO2....................Medium 12-1/2” to 15”...................... Call for Price 

HIPPO3....................Large 16” and over........................... Call for Price 

Natural Smooth camel bone scales. Very dense. Size 1-1/2” x 5” 

CAT. NO. ITEM PRICE/PR 

CB01...................................1-1/2” x 5”......................................... $15.00 

OOSIK 

We have specials and closeouts 

on our website that are not 

in the catalog. There’s always 

something new to see. 


Oosik is the penile bone of the walrus. It is an excellent and sought after 

material for custom-made knives. Polishes like bone or stag. Comes in 

many colors from light off white to dark brown, depending on age and 

degree of fossilization mineral coloration. Each can be cut into spacers 

or full handles depending on the need. 

Call for price, size and availability. 


MISCELLANEOUS ITEMS 

44/40 INSTANT GUN BLUE 

You just clean the metal, wipe on 

Formula 44/40, and immediately 

wipe off. The blueing action is 

instantaneous. 


44-40.........2 oz................$9.95 

BRASS BLACK 

Fast-acting liquid used to blacken 

or antique brass, copper, and 

bronze parts. 


BCW05......3 oz............... $8.95 

WALNUT STAIN 

A true brown walnut color to 

highlight the grain and enhance 

the natural beauty of wood. 

PERMA BLUE PASTE GUN BLUE 

A rich, durable and long lasting 

finish for touch-up or complete 

reblueing. Will not blue 

stainless steel, aluminum or 

non-ferrous metals. 


GBPASTE...............2 oz...........................$5.95 

PERMA BLUE LIQUID GUN BLUE 

Fast acting liquid gives a nonstreaky, 

even, blue-black finish 

to steel. Will not blue stainless 

steel, aluminum or non-ferrous 

metals. 


LGB...........3 oz................$6.95 

TRU-OIL TM 

SUPER BLUE 

A double strength blueing solution 

for polished steel parts 

and hardened steels. This 

product is the blackest blue 

and penetrates the hardest 

steel instantly. 


SBLUE......3 oz.................$8.95 

PRESTO GUN BLUE PEN 

The fast and easy way to clean 

up nicks and scratches. Simply 

rub on with “bullet point” felt 

tip. 


SBLUE2....Pen................$5.95 

COOL TOOL II TM 

This is a cutting and tapping fluid. It is 

non-toxic and extremely effective on 

all metals, including stainless steel 

and aluminum. 


CT01.............4 oz.................. $4.95 


BCW01......3 oz................$5.95 

BLUE & RUST REMOVER 

Removes blue and rust quickly 

and easily. 


BCW03......3 oz.............. $5.95 

SEALER & FILLER 

A clear sealer and filler for wood. 

Seals out moisture and fills the 

grain in one easy step. 


BCW04......3 oz............... $6.95 

A natural wood oil finish to protect 

and enhance the beauty of 

fine wood. 


BCW02......3 oz............... $6.95 

CORROSION X TM 

A multi-functional lubricant that 

will stop and prevent rust and 

corrosion on any metal surface. 

A superior lubricant and 

penetrant. 


CX01.........6 oz............. $10.95 

(This product can be 

shipped ground only) 

Check our website at 

texasknife.com for shows 

we will be attending. We 

hope to see you there! 

CUTTING EDGE MAJIC 

This is an oil based product which 

forms a nitrogen/phosphate conversion 

surface on metal, providing 

corrosion protection, dry film 

lubrication, and extended cutting 

edge life. Converts to a harder 

surface when dry. 


CEM1........1/2 oz................$6.95 

CORROSION X TM LIQUID 

The only product you will need 

to maintain your knives and also 

firearms. It cleans, lubricates, 

and prevents rust. 


CX02.........4 oz...............$10.95 

24 



SCRIMSHAW KITS 

Beginner’s Kit 

This beginner’s kit will get you started. Instructions 

and supplies to make a key chain. 

MIRACLE CLOTH 

This is an all-purpose polishing 

cloth. It polishes and 

cleans oxide off just about 

anything. Use on carbon or 

stainless steel, copper, nickel/ 

silver, brass or aluminum. Use 

it totally up until there is nothing 

left because it works right 

to the end. Leaves a protective 

finish. 11” x 13” 

CAT. NO. 

PRICE 

MC1........................................................ $ 4.25 

FLITZ TM 

TM 

SENTRY TUF-CLOTH 

Multipurpose Dry Protectant. Cleans, prevents 

rust, lubricates without oils or silicones. Marine 

Tuf-Cloth (TC2) is for extreme environments and 

saltwater. Tested and used by the Navy Seals. 


TC1...............TUF-CLOTH..................... $9.95 

TC2...............MARINE TUF-CLOTH..... $10.95 

SENTRY KNIFE CARE KIT 

Intermediate Kit 

The Intermediate Kit contains a Bone handle 

folding pocket knife, scrimshaw scribe, bottle of 

India ink, step by step instructions, steel wool, 

carbon paper, samples of pictures and an ink 

applicatior. Everything you need to practice 

your skills. 


SCRIM1...............Beginner Kit............... $14.95 

SCRIM2...............Intermediate Kit............ 39.95 

LEARNING HOW TO SCRIMSHAW 


by Ron Newton 

The author has over 20 

years experience as a 

scrimshander. The book 

has steps to a completed 

project. It contains information 

about the history 

of scrimshaw, laws about 

ivory, safety, polishing and 

working ivory, tools, getting 

started, and more. Softcover, 

6” x 9”, 59 pages, 20 

b&w photos. 

CAT. NO. 

PRICE 

PUB36................................................... $12.95 

SIMICHROME POLISH TM 

This is a soft paste polish for chrome, silver, 

aluminum, brass...virtually any metal. It gives 

a brilliant shine and leaves a protective film. A 

favorite of many knife makers. 1.76 oz. tube. 


SIMI.....................1.76 oz tube................ $9.95 

This is the finest metal polish we have seen and 

we have decided to market it because of your 

requests. This is the best of the best. It will clean 

brass, nickel/silver, stainless steel or aluminum. 

Also, try it on those carbon steel blades. 


FLITZ..................1.76 oz tube................ $9.95 

GUN STOCK WAX 

This is the way to pick up the shine on the Gareosol 

TM . The 3-ounce container will wax many knife 

handles and do your gunstocks as well. Just 

what it takes to get a dazzling shine. 


STW01................3 oz bottle................... $5.95 

3M TM STAINLESS STEEL 

CLEANER & POLISH 

Cleans and polishes in one easy 

operation. Leaves no greasy film. 

Can be used on stainless steel, 

chrome, aluminum, laminated 

plastics, enamel and ceramic 

surfaces. 


3MSSC......21 oz. can...... $10.95 

NOTE: This product can 

be shipped ground only 

Kit consists of Tuf-Cloth, sharpener, Tuf-Glide, 

lint-free brushes for hard to reach areas, and 

a case. 


TC3...............KNIFE CARE KIT............ $29.95 

3M TM 5-WAY PENETRANT 

Lubricates, demoisturizes, prevents 

rust, cleans and penetrates. 


3M5WP.........17 oz can....... $10.95 

NOTE: This product can be 

shipped ground only 

BLUE LAYOUT FLUID SPRAY 

This blue fluid spray helps in laying 

out patterns on steel and other 

metals. Also effective as an antiflux 

plus anti-heat paste. 


BLUE1..........12 oz can......$7.95 


ground only 



TUF-GUIDE PEN 

SILVER SOLDER 

THERMO-TRAP TM 

HEAT ABSORBING PASTE 

The Tuf-Guide Pen contains a rust inhibitor and 

lubricant in a 1/4 oz. size. A handy pocket clip 

allows you to conveniently carry it with you. 


TGP.......................1/4 oz......................... $5.95 

Gloss SEALER 

This product can be used to 

seal wood, laminated wood, etc. 

It gives a high gloss protective 

coating which dries quickly and 

stays clear. 


GLOSS1............ 11 oz............................. $9.50 

BLUE MAGIC METAL POLISH 

Low temperature with 4% silver content, melts 

at 430 O F. Works best with propane torch on 

brass, nickel/silver, and stainless. Comes in 1 

ounce of solder (1/16” diameter and about 5’- 

6” long), or 1 pound of solder,(1/16” diameter, 

on a roll). 


SOLDER1...........1 oz.............................. $5.50 

SOLDER2...........1 lb............................... 44.95 

FLUX 

Works with the solder above. 

Comes in 4 oz. 


FLUX...........4 oz..............$8.50 

(NOTE: CANNOT BE 

SHIPPED BY AIR.) 

FLUX BRUSH 

A gel that prevents heat from traveling to an 

area on your blade that you don’t want to get 

too hot. Water-soluble. Works well when soldering 

on knife guards. Wash off immediately 

after use. 


CATT...................11 oz.......................... $12.95 

3M TM MARINE METAL 

RESTORER AND POLISH 

Restores and polishes stainless 

steel, brass, bronze, copper, 

and chrome. Removes 

surface rust, corrosion, oxidation 

and tarnish. A little goes a 

long way. 


3MP............18 oz.........$19.95 

SENTRY TM TUF-GLIDE 

Instantly removes oxidation, tarnish and dirt 

while it polishes any metal surface and leaves 

a silicone film. 


BLUE2................3-1/2 oz tube................ $9.95 

THUNDER T3 EARMUFF 


FLUXBRUSH..........BRUSH.................... $0.25 

SOLDERING KIT 

Powerful, dry-film rust inhibitor 

and lubricant proven to outperform 

oils, silicones and 

similar products. Use Tuf- 

Glide to protect hard to reach 

areas. Great for folders! 


TG1............TUF-GLIDE...... 1/2 oz...........$9.95 

Precision Applicator 

TG2............ TUF-GLIDE..... 8 oz..............24.95 

Refill 

Top of the line protection and comfort for noise 

reduction. 


EAR1......... THUNDER EARMUFF....... $31.95 

26 

MAX LITE EARPLUGS 

Low pressure foam 

earplugs with a noise 

reduction rating (NRR) 

of 30. Available in 

packs of 10 only. 


MLEP1................ PKG. OF 10................. $4.95 

This soldering kit includes 4 oz. Stay-Clean TM 

flux, a flux brush, a cleaning brush with brass 

and stainless steel bristles, 1 oz. of solder, and 

instructions. 


SK1.....................KIT............................. $14.95 

SAFETY SPECTACLES 

Safety spectacles provide protection against 

moderate impact hazards, metal chips, particles 

and sparks. Tinted lenses provide virtually 100% 

protection from ultraviolet rays. 

CAT. NO. ITEM 

PRICE 

SPEC1......SAFETY SPECTACLES......... $7.95 

OPTI VISOR ® WITH PLASTIC 

LENSES 

CAT. NO. MAGNIFIES LENGTH PRICE 

OPDA 3.....1-3/4 times......... 14 Inches............ $34.95 

OPDA 4.....2 times............... 10 Inches.............. 34.95 

OPDA 5.....2-1/2 times......... 8 Inches................ 34.95 

OPDA 7.....2-3/4 times......... 6 Inches................ 34.95 



LANYARDS 

AUTOMATIC CENTER PUNCH 

WTLBB 

BLACK/ 

BLACK 

WTLBG 

BLACK/ 

GRAY 

Spring tension can be adjusted for light or heavy 

markings. One hand operation, no hammer 

needed. Aluminum body. 


GT77..............CENTER PUNCH........... $19.95 

EYE LOUPE 




today!! 


WTLBOD 

\BLACK/OLIVE 

DRAB 

MAGNETIC PICKUP 

WTLBGF 

BLACK/ OLIVE 

DRAB WITH 

FLECKS 

These lanyards are made with parachute cord 

and have been hand tied. Put these on your 

knives so that the lanyard can assist you in getting 

your knife out of it’s sheath or your pocket. 

Buy several. Some more uses for the lanyards 

include backpack zippers, clothing zippers, luggage 

I.D’s, cell phone lanyards, camera lanyards 

and keychains. 


WTLBB..........BLACK/BLACK................. $7.95 

WTLBG..........BLACK/GRAY..................... 7.95 

WTLBOD.......BLACK/O.D......................... 7.95 

WTLBGF........BLACK/O.D. WITH............. 7.95 

GRAY FLECKS 

This is handy to have around when you need 

to do some close up work. Useful to jewelers, 

watch and instrument makers, engravers and 

hobbyists. 


GT527............EYE LOUPE..................... $7.95 

HEAVY DUTY WORK APRON 

SCREW GAUGE 

Quick way of identifying 

machine screws, bolts, 

wood screws, self-tapping 

screws, standard size 

rivets and common cotter 

pin sizes up to 

5/16”. 

CAT. NO. PRICE 

GT714.................. $9.95 

3M TM CLOTH 

Telescoping, high-power, pocket, magnetic, pickup 

tool. Ideal for retrieving steel and iron parts 

from hard to reach work areas. 


GT383X.........MAGNETIC PICKUP.......... $9.95 

MARKING GAUGE / SCRIBE 

Can be used for center lines and many other 

scribing chores. Etched in 16th graduations. 

Replaceable needle point. 


GT820..........MARKING GAUGE........... $16.95 

This work apron is heavy duty and protects 

your clothing from shop dust and grime. It is 

made of heavy blue denim with tie strings, and 

it is hemmed. There is a handy pocket for pens, 

eyeglasses, etc. 


APRON1................. WORK APRON...... $ 9.95 

MAGNIFIER LOUPE 

High performance cloth made by 3M. It is made 

out of 80% polyester and 20% nylon. Machine 

washable. 

CAT. NO. 

PRICE 

3MC.......................................................... $7.95 

RENAISSANCE WAX 

The best wax we’ve found that polishes, restores, 

and protects your fine blades and handle 

material. 


This loupe is illuminated so that small copy or objects 

are easier to see and read. Power is 4X .4” 

focal length. Batteries and bulb are included. 


GT553.............MAGNIFIER LOUPE........ $9.95 


WAX1....................7 oz.......................... $29.95 

WAX2....................2.25 oz....................... 18.95 



KNIFEMAKER VISE 

CAT. NO. 

PRICE 

VISE1..................................................... $99.95 

CARBIDE SCRIBE 

Tungsten carbide point for marking and scribing 

stainless steel, ceramics, and glass. Permanent 

alnice magnet for metal pick-up in hard to reach 

places. Screw chuck for reversing when not in 

use. 

CAT. NO. 

PRICE 

SCRIBE2................................................. $8.95 

ELECTRONIC DIGITAL CALIPER 

Electronic digital caliper. Measures inside 

and outside in inches and mm. Range is 6” or 

150mm. LED display to 5 digits. Battery life 

minimum is 12 months. 


CALIPER1............ CALIPER................. $49.95 

FILE CLEANING BRUSH 

DRILL SIZE, TAPS, GAUGE, 

DECIMAL AND METRIC EQUIV- 

ALENT CHART 

This complete shop 

chart has all of the 

proper drill sizes for 

taps so that you can 

drill the right size 

hole for the threads 

to cut properly. Also 

it has the number 

and metric drill sizes 

and the gauge thicknesses. 

The chart 

size is 11” X 17”. It 

is printed on heavy 

stock paper. 

CAT. NO. 

PRICE 

PUB20.....................................................$2.50 

BOOT CLIP FOR SHEATHS 

Gerber type. Large 

are 7/8” wide and 

small are 3/8” wide. 

CAT. NO. SIZE QUANTITY PRICE 

CLIPLG.........LARGE.......... 1..................$1.50 

CLIPLG12.....LARGE.......... 12................15.50 

CLIPSM.........SMALL.......... 1....................1.25 

CLIPSM12....SMALL.......... 12................13.50 

KNIFEMAKER’S SCRIBE 

CAT. NO. 

PRICE 

SCRIBE1............................................... $29.95 

DIGITAL MICROMETER 

CLAMPS 

KANST TWIST CLAMP 

When assembling knife handles we have always 

had a problem with the C-Clamp twisting the 

handles and spacers when we do not want this to 

happen. We have found a new type of clamp that 

does not twist. When it closes, it just closes, and 

the handles and spacers do not twist out. This 

is why we think you will like our new c-clamps, 

the Kanst Twist Clamps. We offer them in either 

round or T-type handles. Size indicates the distance 

it will open. Made in America. 

CAT. NO. SIZE HANDLE PRICE 

KT75R.........3/4”.........ROUND.............. $15.95 

KT10R.........1”............ROUND................ 16.95 

KT10T.........1”............T............................ 15.95 

KT15R.........1-1/2”.....ROUND................ 17.95 

KT20R.........2”............ROUND................ 20.95 

KT20T.........2”............T............................ 18.95 

PIN VISE 

Double end pin vise to hold drills, reamers, and 

rods. 3-3/4” long x 5/16 diameter. 

CAT. NO. 

PRICE 

VISE3.....................................................$13.95 

HAND VISE 

We use this vise all the time in our shop for 

holding objects while we are grinding or sanding. 

It works great! 1-1/4” jaws. 


VISE4......................VISE...................... $26.95 

DEBURRING TOOL 

Made by Nichelson. Used for general cleaning 

of file teeth. Finest available. 


FCB................. KNIFE CLEANING........ $19.95 

BRUSH 

28 

You can easily read the measurement on the 

counter to .001” and then quickly read the vernier 

scale on the sleeve to the .0001”. 


MICRO1..................CALIPER................ $44.50 

Supplied with two deburring blades, one for steel 

and one for brass. 


GT482............DEBURRING TOOL........ $10.95 



ASSORTED DIAMOND BURRS 

FILE GUIDE 

Complete set of 30 individual, assorted burrs. The shaft is .117 and the 

length is 1-3/4”. 


DB2GRN........................... DIAMOND BURRS.............................. $19.95 

ASSORTED DIAMOND BURRS 

A file guide is an easy way to square up shoulders on hidden tang 

knives. 


FG1.................................... FILE GUIDE...................................... $38.95 

CHAIN SAW FILES 

Complete set of 30 individual, assorted burrs. The shaft is .117 and the 

length is 1-3/4”. 


DB1RED.................................DIAMOND BURRS........................ $19.95 

FILE HOLDER 

There are four inserts included with file 

handle to fit a full range of files. 

The new round smooth file is the fastest cutting and best finishing file to 

be found. 

CAT. NO. LENGTH DIAMETER PRICE 

CSF18.........................6”....................... 1/8”.................................. $4.50 

CSF532.......................6”........................ 5/32”................................. 4.50 

CSF316.......................8”........................ 3/16”................................. 4.50 

CSF14.........................8”........................ 1/4”................................... 4.50 

SWISS PATTERN FILES SET 


FH1.................... FILE HOLDER........ $5.95 

1/8” SHANK FILE SET 

This set includes three file shapes that fit on the GTS477 handle. 


GTS477......................FOUR PIECE NEEDLE SET....................... $14.95 

This hardened file set offers a selection of 

medium size files for most of the roughin 

and finish work you’ll encounter as a 

knifemaker. 


SFS1........... 1/8” SHANK FILE SET....$19.50 

PRECISION FILE KIT 

This kit contains 6 hardened mini files with a 

5-1/2” anodized aluminum handle that holds 

and stores everything. It comes with a pocket 

clip. Made in America. 

WARDING FILES 

Double cut on sides, single cut on edges. Thin rectangular shape. These 

files are great for opening slots in guards. 

CAT. NO. LENGTH DIAMETER PRICE 

WF1.............................8”.................... Bastard.............................. $15.95 

WF2.............................8”.................... Second................................ 16.95 

WF3.............................8”.................... Smooth................................ 18.95 

CF1 

CHECKERING FILE 

CF2 


PFKH..........................PRECISION FILE KIT................................ $19.95 


CF1.............................20 LINES PER INCH................................. $39.95 

CF2.............................30 LINES PER INCH................................... 39.95 


SHARPENING EQUIPMENT 

hONING OIL AND BENCH STONE 

diamondstone block mate 

ELECTRIC DIAMONDSTONE 

SHARPENER 

tm 

Nathan’s Natural Honing Oil and a soft Arkansas 

Bench Stone team up to make getting a fast, 

sharp edge on your knife easy. 


LSCOMBO.........Oil & Bench Stone...... $21.95 

bench stone 

This soft Arkansas Bench 

Stone is used to achieve a 

fast, sharp edge. The stone 

is mounted on a wood block 

for ease of use and hand 

protection. 

CAT. NO. 

PRICE 

LBS6S...................... $19.95 

Fits right in your knife block. The diamond and 

ceramic stones sharpen and hone knives. Gives 

a hollow ground edge. 


DS1........................ Diamondstone........$15.95 

Blockmate 

diamondstone 2-stage 

tm 

This DiamondStone Knife Sharpener will find a 

permanent place on your countertop. It has real 

diamond and ceramic mixed wheels, and does 

an excellent job sharpening dull knives quickly 

and conveniently. 


DS3..................... DiamondStone........... $89.95 

Electric Sharpener 

POWERSTROP 

honing oil 

Highly refined lubricant. A few 

drops will lubricate all natural 

and man-made bench stones 

and sharpening hones. Use it 

to achieve professional quality 

cutting edges on all your knives 

and tools. 

CAT. NO. 

PRICE 

LOL01................................ $4.95 

PROFESSIONAL KNIFE 

sharpening wheel set 

Diamond and ceramic stones. The ceramic 

stones sharpen and hone and the white stones 

give a finishing polish. 


DS2........................Diamondstone......... $25.95 

2-Stage 

TRISTONE 

Leather wheel which is used to remove the wire 

edge burr from stone sharpening resulting in a 

keen razor-sharp edge like you’ve never seen 

before. 


PSO....................... Powerstrop............. $19.95 

7-1/2” x 3/4” gritted wheel and 7-1/2” x 3/4” 

slotted wheel. Also includes 4 oz. of white 

rouge, silicone carbide regrit powder, lubricant 

and arbor reducer bushings. 

CAT. NO. ...........ITEM 

PRICE 

SHAKIT8............7-1/2” wheels.............. $29.95 

SHAKITCOMP...Compound Kit................. 8.95 

Arkansas stone (includes coarse, med., and 

fine). Comes with a high quality honing oil. 

CAT. NO. 

PRICE 

SHATRISTONE...................................... $21.95 

LEATHER WHEELS 

These leather wheels are great for sharpening 

your blades. 


LW1...................6” solid ........................ $39.95 

LW2...................8” solid........................... 69.95 




today!! 


30 


SHARPENING EQUIPMENT 

lansky rat tail sharpener 

LANSKY CROCK STICK 

Knife sharpening stick. Made of alumina ceramic 

with a solid wood handle. Use to sharpen kitchen, 

serrated and sporting knives. 

CAT. NO. 

PRICE 

CS1........................................................ $14.95 

knife care video 

LANSKY SHARPENING SYSTEMS 

All Lansky sharpening systems include: color 

coded sharpening hones with finger grooves, 

a multi-angle, flip over knife clamp, a guide rod 

for each stone, specially formulated honing 

oil, extra long knife clamp screws, a custom 

molded storage/carrying case to hold all the 

system components, and complete, easy to 

follow instructions. 

Lansky Deluxe Knife Sharpening 

System 

Lansky Folding Rat Tail tapered diamond sharpening 

rod, fine grit. Featuring rubber over molded 

Comfort Grip handle. 

CAT. NO. 

PRICE 

LFRTF.................................................... $14.95 

DMT diamond steel 

12” rod diamond coated that never fails to 

sharpen. This 600 grit steel really has bite and 

will end your sharpening problems. 

CAT. NO. 

PRICE 

DMT12..................................................$ 39.95 

sharpening made easy 

KNIFE CARE 

by Jerry Fisk 

Learn how to care for and maintain your knife 

properly from Jerry Fisk, a master bladesmith. 

He will share his knowledge and his methods 

for sharpening various types of knives correctly. 

Also, he will show you how to care for your 

knives so that they will retain their value. A very 

informative video. 

CAT. NO. 

PRICE 

VIDEO11................................................ $29.95 

LANSKY CROCKSTICK 

The dullest blades can be sharpened to perfection 

with this deluxe sharpening kit. The deluxe 

system consists of 5 stones: extra coarse, 

coarse, medium, fine and ultra-fine. 


SHALK1................. Sharpening............. $39.95 

system 

Lansky Standard Knife Sharpening 

System 

SHARPENING MADE EASY 

by Steve Bottorff 

This book reveals the sharpening techniques 

needed for everything from razor blades to 

axes. Whether you require a sharp slicer for the 

kitchen or a sturdy chopper for the field, this book 

will show you how to get the edge you need. 

Softcover, 96 pp. 

CAT. NO. 

PRICE 

PUB25..................................................$ 11.95 

A fast and easy knife sharpener that is easy to 

use and compact enough to fit in your pocket. 

Two 5” alumina, ceramic rods store inside a 

hardwood box that becomes the sharpening 

rod holder. 


LCS5D.......... CROCKSTICK................. $13.95 

ADVANCED BLADE SHARPENING TECHNIQUES 

This basic knife sharpening system for everyday 

sharpening tasks includes a coarse hone, a 

medium hone and a fine hone. 


SHALK2................. Sharpening.............$29.95 

system 

Lansky Diamond Knife Sharpening 

System 

With Murray Carter 

Murray Carter is a 17th Generation Yoshimoto Bladesmith who lived and worked as a 

bladesmith in Japan for over 18 years. In this video you will learn advanced sharpening 

techniques from the master: 6 Step Sharpening Procedure • Kata-Ha Sharpening 

• Tanto Blade Re-Grinding • Using Stones So They Wear Evenly • Shortcomings of 


DVD18 $35.00 

Guides & Jigs • Function of Polishing Sludge • What to 

do with Serrations • Effect of Angled Micro-Serrations 

on Slice • Pitting on Carbon Steeled Blades. The video 

includes forging footage from his shop and a shaving 

demonstration. 

The hardness of tool quality diamonds makes 

them especially valuable for sharpening today’s 

ultra-hard blade steel. The kit includes a coarse 

diamond hone, a medium diamond hone and a 

fine diamond hone. 


SHALK3................. Sharpening.............$64.95 

system 


BELT SANDERS 

This belt sander is highly recommended as a knifemaker’s first 

machine. It is an inexpensive method to turn out much better looking 

knives and increase your speed while doing it. This machine 

can be totally utilized by mounting it in a position where you can 

work from the side, front or rear. The large platen is very useful 

for flat grinding metals or wood. The platen is fully adjustable 

and belt changing is quick and easy. The rubber or felt covered 

wheel is mounted directly to the driver motor. Motors are sealed 

for longer life. 

D-5010 BELT SANDER 

Belt Sander Specifications: 

Belt Size 2-1/2” x 48” 

Belt Speed 3300 sfm 

Motor 

½ H.P., 1750 rpm, 110 volt, 5.3 amps with 

heavy duty switch and 8 foot grounded cord. 

Runs very quiet. 

Contact Wheel Cast aluminum, 6-3/4” diameter X 2-7/8” wide, 

1/2” arbor hole with rubber covered face. 

Idler Pulley Cast aluminum, 3” diameter crowned face 

with sealed high-speed double row bearings 

spring tensioned and adjustable for alignment. 

Size Dimensions 20” x 12” x 9” 

Shipping Weight 50 lbs. 

(NOTE: Sanders equipped with TEBB motor which means that they 

have totally enclosed motor with Ball Bearings.) 

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. 

D-5000 BELT SANDER WITHOUT MOTOR 

This machine comes without a motor, which reduces the cost for 

those of you that have a spare motor. 


D5000R...........................D5000R BELT SANDER..................... $ 325.00 

with rubber covered contact wheel 

SHIPPING WEIGHT 23 lbs. 


D5PLATEN.................... PLATEN ASSEMBLY.............................. $47.00 

D5MOTOR..................... MOTOR ONLY....................................... 195.00 


D5WHE01....... RUBBER COVERED... $165.00 

CONTACT WHEEL 

OTHER PARTS AVAILABLE 


D5010R.......................... D-5010R BELT SANDER................ $425.00 

With rubber covered contact 

wheels. Shipping weight 50 lbs. 

May be purchased separately from Back Stand 

Idler Assembly. Cast aluminum with 3” diameter 

crowned face mounted on shaft complete with 

ball bearings. 


D5IDL02.............IDLER PULLEY..............$59.95 

May be purchased separately from Back Stand 

Idler Assembly. Shaft 5/8” diameter and crowned 

rubber covered wheel. Slight motor location adjustment 

could be necessary. 


D5IDL031 .......RUBBER COVERED...... $114.00 

IDLER PULLEY 

MAX LITE EARPLUGS 

Low pressure foam earplugs with a noise reduction 

rating (NRR) of 30. Available in packs 

of 10 only. 


MLEP1................ PKG. OF 10...............$4.95 

Complete with idler pulley, spring tension, belt 

adjustment screws and mounting bracket 


D5IDL01 ........ BACK STAND IDLER.... $115.00 

ASSEMBLY 

ZAM BUFFING COMPOUND 

Perfect for the Cork belt. This is a fine finishing 

compound. It leaves a high lusture without 

a residue. Great for blade steel, stones and, 

jewelry too. It will not scratch soft stones. 


ABRZAM...........1 lB................. $10.50 

32 


CONTACT WHEELS 1/2” THROUGH 5” 

Prices listed for wheels 1/2” through 5” dia. in any width 

include shaft and bearings. Wheels come in either plain face 

or serrated. Wheels 1/2” and 5/8” dia. are not available in a 

serrated face. Wheels 1/2” through 3” dia. should not be run 

at speeds in excess of 3000 SFPM. These are 2” wide. 

CAT. NO. DIA. PRICE 

BADW21......................... 1/2”................................ $ 50.00 

BADW24......................... 5/8”.................................. 50.00 

BADW22......................... 3/4”.................................. 50.00 

BADW23......................... 1”..................................... 50.00 

BADW25......................... 1-1/4”............................... 52.00 

BADW26......................... 1-1/2”............................... 55.00 

BADW27......................... 2”..................................... 62.00 

BADW28......................... 3”..................................... 72.50 

BADW29......................... 4”..................................... 86.50 

BADW30......................... 5”.................................... 103.00 

CONTACT WHEELS 6” THROUGH 14” 

Prices for wheels 6” through 14” dia. do not include shaft 

and bearing. Add $90.00 if shaft and bearings are to be 

included. For use on Wilton machines specify 3/4” shaft. 

Specify bore on wheels for other machine types. 

PLAIN FACED 2” WIDE 


BADW5........................... 6”..................................$ 176.00 

BADW7........................... 8”.................................... 233.00 

BADW9........................... 10”.................................. 290.00 

BADW12......................... 12”.................................. 333.00 

BADW14......................... 14”.................................. 387.00 

SERRATED 2” WIDE 


BADW6........................... 6”..................................$ 192.00 

BADW8 .......................... 8”.................................... 265.00 

BADW10......................... 10”.................................. 332.00 

BADW13......................... 12”.................................. 398.00 

BADW15......................... 14”.................................. 445.00 

DRIVE PULLEY (Specify bore size) 

CAT. NO. DIA. BELT SPEED PRICE 

BADDP2.............1-1/2”.......... 1325......................$ 50.00 

BADDP3.............2”................. 1850........................ 52.00 

BADDP4.............3”................. 2750........................ 63.00 

BADDP5.............4”................. 3700........................ 95.00 

BADDP6.............5”................. 4600........................ 110.00 

BADDP7.............6”................. 5500........................ 132.00 

BADDP8.............8”................. 7400........................ 160.00 

OPTIONAL ACCESSORIES 


BADPL........2” Wide platen w/(2) 2x2 wheels.............$ 127.00 

BADRE2.....Work rest for above platen....................... 33.00 

BADRE1 ....Work rest forcontact wheel ..................... 58.00 

BADHP ......Hinged angle plate-bench mounted .......... 165.00 

BADSF1 .....Fabricated steel floor stand...................... 320.00 

BADSF2 .....Steel floor stand with hinged ................... 485.00 

angle plate 

BADCA.......Combination arm (5” x 2” serrated.............. 240.00 

rubber contact wheel, platen with 

workrest and slack belt setup) 

BADW11.....Shaft and bearings for wheels.................. 90.00 

BADFTA......Fork tip Attachment................................. 95.00 

BADHDA.....Heavy Duty Arm .................................... 65.00 

BADBG.......Belt guard to meet O.S.H.A. safety stds.... 125.00 

GRAPHITE MATERIAL FOR FLAT PLATEN 

Canvas covered with graphite. 2” wide. Used to cushion 

and extend belt life. Sold by foot. 

CAT. NO. ITEM 

PRICE/FOOT 

GR1...........2” graphite material for flat platen........... $4.00 

BADER BELT GRINDER 


MAG1.............. 9”........................ $ 24.95 

MAG2.............. 5”......................... 19.95 

SHOWN WITH 8” CONTACT WHEEL 

SHOWN WITH SMALL WHEEL ARM 

SHOWN WITH PLATEN 

**Easier & more precise tracking **Increased adjustable belt tension **Quick change 

arms - no aligning needed **No tools required to change set-ups **Accepts contact 

wheels 1/2” - 14” O.D. 

BADER BIII-B3 BENCH MODEL MACHINE 

Complete with 1-1/2 HP, 110-220 volt, single phase, TEFC motor, HD arm, serrated 

rubber 8” x 2” wheel with bearing hub and flanges, Adapter arm with Fork tip and 

1/2”, 3/4”, or 1” dia. x 2” wide wheel, 6” and 3” diameter drive pulleys to yield belt 

speeds of 5800 or 2800 SFPM. (Pulleys to yield other speeds from 1000 to 8000 

SFPM may be substituted for standard sizes or purchased separately.) 


BABM3 ..................................B3 BENCH 1-1/2 HP ........................................ $1750.00 

Same as above but machine supplied with 2 HP, single phase, 110-220 volt TEFC 

motor. 


BABM4 ..................................B3 BENCH 2 HP .............................................. $2020.00 

VARIABLE SPEED MOTOR & CONTACT WHEEL OPTION CAT. NO. PRICE 

The above machine is supplied with 1-1/2HP variable............BADVS2..........$2500.00 

speed DC motor w/Nema 12 control, 220V, 7amps 

The above machine is supplied with 2HP variable speed........BADVS3............2875.00 

DC motor w/Nema 12 control, 220V, 10 amps 

The above machine is equipped with 10” x 2” wheel in...........BADVS4................67.00 

place of the 8” x 2” wheel 

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. 

ALL UNITS ARE SHIPPED FOB NEW YORK. CALL 

FOR OTHER PARTS AND PRICES. 

KNIFE GRINDING MAGNET 

This magnet helps you hold the blade 

steel to be ground against the contact 

wheels or platen. It is an excellent aid 

when you are surface grinding. 

GRINDING WHEEL 

DIAMETER CHART 

Texas knifemaker’s supply order toll free (888) 461-8632 fax (713) 461-8221 33 

Front 

Back 

This chart is especially 

useful in determining 

the thickness 

and width of barstock 

you need to make 

your knife on a given 

dia. grinding wheel. 


PUB23......... $ 14.95

BELTS 

MICRON FILM BELTS 

These Micron film belts are very thin. Water may be added while running 

to aid in lubricity and life of the belt. They may be washed in warm, soapy 

water. Comparison of microns to standard grits: 

MIC GRIT MIC GRIT MIC GRIT MIC GRIT 

9 900 30 400 60 240 100 150 

15 600 40 320 80 180 

2-1/2” x 48” 

GRIT CAT. NO. EACH CAT. NO. 10+/EACH 

9 MIC.......A48MI09.......... $4.95............. A48MI09X.................. $4.45 

15 MIC.......A48MI15............ 4.95.............. A48MI15X.................... 4.45 

30 MIC.......A48MI30............ 4.95.............. A48MI30X.................... 4.45 

40 MIC.......A48MI40............ 4.95.............. A48MI40X.................... 4.45 

60 MIC.......A48MI60............ 4.95.............. A48MI60X.................... 4.45 

80 MIC.......A48MI80............ 4.95.............. A48MI80X.................... 4.45 

100 MIC.......A48MI100.......... 4.95.............. A48MI100X.................. 4.45 

2” x 72” 


9 MIC.......A72MI09 $4.95............. A72MI09X.................. $4.45 

15 MIC.......A72MI15.............4.95............. A72MI15X.................... 4.45 

30 MIC.......A72MI30.............4.95............. A72MI30X.................... 4.45 

40 MIC.......A72MI40.............4.95............. A72MI40X.................... 4.45 

60 MIC.......A72MI60.............4.95............. A72MI60X.................... 4.45 

80 MIC.......A72MI80.............4.95............. A72MI80X.................... 4.45 

100 MIC.......A72MI100...........4.95............. A72MI100X.................. 4.45 

ZIRCONIA BELTS 

A/O HERMES BELTS 

2-1/2” x 48” 

GRIT CAT. NO. EACH CAT. NO. 10+ 

120...........A48AO120............$4.45................ A48AO120X............$3.95 

220...........A48AO220.............. 4.45................ A48AO220X..............3.95 

320...........A48AO320.............. 4.45................ A48AO320X..............3.95 

400...........A48AO400.............. 4.45................ A48AO400X..............3.95 

600...........A48AO600.............. 4.45................ A48AO600X..............3.95 

800...........A48AO800.............. 4.45................ A48AO800X..............3.95 

2” x 72” 


120...........A72AO120............$4.95................ A72AO120X............$4.45 

220...........A72AO220.............. 4.95................ A72AO220X..............4.45 

320...........A72AO320.............. 4.95................ A72AO320X..............4.45 

400...........A72AO400.............. 4.95................ A72AO400X..............4.45 

600...........A72AO600.............. 4.95................ A72AO600X..............4.45 

800...........A72AO800.............. 4.95................ A72AO800X..............4.45 

3M CERAMIC BELTS 

2-1/2” x 48” 


36............. A48Z36.................$5.95................. A48Z36X............... $ 5.25 

60............. A48Z60...................5.95................. A48Z60X.................. 5.25 

2” x 72” 


36............. A72Z36.................$6.95................. A72Z36X............... $ 6.45 

60............. A72Z60...................6.25................. A72Z60X.................. 5.75 

1” x 42” 

GRIT CAT. NO. EACH 

60............. A42Z60.................$2.45 2” x 72” 

NORTON NORZON BLUE BELTS 

2” x 72” 

CAT. NO. EACH CAT. NO. 10+EACH 

A72REG36..............9.95......................... A72REG36X.................... $9.05 

A72REG60..............9.95......................... A72REG60X...................... 9.05 

A72REG80..............8.95......................... A72REG80X...................... 8.15 

A72REG120............8.95......................... A72REG120X.................... 8.15 

A72REG220............8.95......................... A72REG220X.................... 8.15 

3M TRIZAC BELTS 


2000.........A72APEX6............$9.95 ............... A72APEX6X............$9.15 

1200.........A72APEX16............9.95................ A72APEX16X............9.15 

600.........A72APEX30............9.95................ A72APEX30X............9.15 

3M TRIZAC GATOR BELTS 

2-1/2” x 48” 


60...........A48NN60..............$7.95................ A48NN60X.............. $7.25 

80...........A48NN80................7.95................ A48NN80X................ 7.25 

120...........A48NN120..............7.50................ A48NN120X.............. 6.95 

220...........A48NN220..............7.50................ A48NN220X.............. 6.95 

2” x 72” 


36...........A72NN36..............$7.95................ A72NN36X.............. $7.25 

60...........A72NN60................7.95................ A72NN60X................ 7.25 

80...........A72NN80................7.95................ A72NN80X................ 7.25 

120...........A72NN120..............7.50................ A72NN120X.............. 6.95 

220...........A72NN220..............7.50................ A72NN220X.............. 6.95 

Newest technology from 3M. Excellent cutting ability and long life. 

2” x 72” 


80...................................... A72GA300.......................................... $9.95 

120...................................... A72GA160............................................ 9.95 

240...................................... A72GA65.............................................. 9.95 

400...................................... A72GA45.............................................. 9.95 

34 


BELTS AND ABRASIVES 

J-FLEX (YELLOW) BELTS 

2” x 72” 

These soft belts work great for slackbelt contour grinding. 

CAT. NO. EACH CAT. NO. 10+/EACH 

A72JF80...............$5.50........................ A72JF80X........................ $5.10 

A72JF120.............. 5.50........................ A72JF120X........................ 5.10 

A72JF220.............. 5.50........................ A72JF220X........................ 5.10 

A72JF320.............. 5.50........................ A72JF320X........................ 5.10 

A72JF400.............. 5.50........................ A72JF400X........................ 5.10 

J-FLEX SCALLOPED 

1” x 72” Scalloped Belts 

These work great for corners. 

CAT. NO. EACH CAT. NO. 10+/EACH 

A72JFS120...........$3.95........................ A72JFS120X.................... $3.55 

A72JFS220............ 3.95........................ A72JFS220X...................... 3.55 

A72JFS320............ 3.95........................ A72JFS320X...................... 3.55 

A72JFS400............ 3.95........................ A72JFS400X...................... 3.55 

CROCUS CLOTH POLISHING BELTS 

Add rouge to these belts. 

CAT. NO. SIZE EACH CAT. NO. 10+/EACH 

A48CC........2-1/2” x 48”......... $4.50 .............. A48CCX.................. $4.10 

A72CC........2” x 72”..................4.50............... A72CCX.................... 4.10 

SCOTCHBRITE BELTS (for satin finsh) 

CAT. NO. SIZE EACH 

A48SB.................................... 2-1/2” x 48”.................................... $29.95 

A72SB.................................... 2” x 72”............................................ 29.95 

MULTI-TOOL BELTS 

MULTI-TOOL BELTS 2 x 36” 

(4” contact wheel) 


36..............A36AO40............ $3.25 .............. A36AO40X.............. $2.95 

60..............A36AO60..............3.25............... A36AO60X................ 2.95 

80..............A36AO80..............3.25............... A36AO80X................ 2.95 

100..............A36AO100............2.95............... A36AO100X.............. 2.65 

220..............A36AO220............2.95............... A36AO220X.............. 2.65 

320..............A36AO320............2.95............... A36AO320X.............. 2.65 

400..............A36AO400............2.95............... A36AO400X.............. 2.65 

MULTI-TOOL BELTS 2 x 48” 

(8” contact wheel) 


36..............MT48AZ36.......... $4.95 .............. MT48Z36X.............. $4.50 

60..............MT48Z60..............4.50............... MT48Z60X................ 4.10 

80..............MT48Z80..............4.50............... MT48Z80X................ 4.10 

120..............MT48AO120.........3.25............... MT48AO120X........... 2.95 

220..............MT48AO220.........3.25............... MT48AO220X........... 2.95 

320..............MT48AO320.........3.25............... MT48AO320X........... 2.95 

400..............MT48AO400.........3.25............... MT48AO400X........... 2.95 

600..............MT48AO600.........3.25............... MT48AO600X........... 2.95 

1” X 42” OXIDE BELTS 

1” x 42” 


120.......................................... A42AO120....................................... $2.45 

220.......................................... A42AO220......................................... 2.45 

320.......................................... A42AO320......................................... 2.45 

400.......................................... A42AO400......................................... 2.45 

600.......................................... A42SC600......................................... 2.45 

CORK BELTS 

For polishing. Add rouge. 


A48CK.................................... 2-1/2” x 48”.......................................$8.95 

A72CK.................................... 2” x 72”.............................................12.95 

SHOP ROLLS 

Available for hand finishing and other chores. 1” x 50 yard rolls of aluminum 

oxide grit. 

GRIT CAT. NO. PER/ FOOT CAT. NO. PER/ROLL 

100 .......... ASR100.......... $0.45................ ASR100R................... $19.95 

180 .......... ASR180............ 0.45................ ASR180R..................... 19.95 

320 .......... ASR320............ 0.45................ ASR320R..................... 19.95 

400 .......... ASR400............ 0.45................ ASR400R..................... 19.95 

WET DRY SHEETS OF SANDPAPER 

Silicon Carbide abrasive. 9” x 11” sheets. Grits may be mixed. 

GRIT CAT. NO. PER SHEET CAT. NO. 20+ 

180............AWD180............. $0.95............... AWD180X............... $0.85 

320............AWD320...............0.95............... AWD320X................. 0.85 

400............AWD400...............0.95............... AWD400X................. 0.85 

600............AWD600...............0.95............... AWD600X................. 0.85 

1200............AWD1200.............0.95............... AWD1200X............... 0.85 

1500............AWD1500.............0.95............... AWD1500X............... 0.85 

2000............AWD2000.............0.95............... AWD2000X............... 0.85 

DRUM SANDER MANDRELS & SANDING RINGS 

These handy little sanding drums are very useful for shaping finger grooves 

and getting into small radius areas on the underside of the handles and 

guards. They also reduce the finishing time on handles and give a professional 

look and feel to your knife handles. They can be used in a drill press 

or hand held electric drill. Mandrels come with a 1/4” diameter shaft. 

Drum Sander Mandrels 


DM01......................1/2” diameter x 1” long..........$3.95 

DM02......................3/4” diameter x 1” long............4.25 

DM03......................1” diameter x 1” long...............4.50 

DM04`.....................1” diameter x 2” long...............5.50 

Sanding Rings 

GRIT CAT. NO. SIZE EACH 

36..........DMSR136................. 1/2” x 1”..............$0.45 

60..........DMSR160................. 1/2” x 1”................0.45 

150..........DMSR1150............... 1/2” x 1”................0.45 

320..........DMSR1320............... 1/2” x 1”................0.45 

36..........DMSR236................. 3/4” x 1”................0.45 

60..........DMSR260................. 3/4” x 1”................0.45 

150..........DMSR2150............... 3/4” x 1”................0.45 

320..........DMSR2320............... 3/4” x 1”................0.45 

36..........DMSR336................. 1” x 1”...................0.50 

60..........DMSR360................. 1” x 1”...................0.50 

150..........DMSR3150............... 1” x 1”...................0.50 

320..........DMSR3320............... 1” x 1”...................0.50 

36..........DMSR436................. 1” x 2”...................0.65 

60..........DMSR460................. 1” x 2”...................0.65 

150..........DMSR4150............... 1” x 2”...................0.65 

320..........DMSR4320............... 1” x 2”...................0.65 


36 

ABRASIVES, BUFFING AND POLISHING 

9” SANDING RING & DURO SPRAY ADHESIVE 

Machined steel, balanced for smooth 

sanding or flat grinding. 9” diameter and 

5/8” arbor hole. 


SD01...............9” Disc...................... $89.95 

SD02...............Disc Pad for 9”............. 5.95 

Sanding Disc 

3MAD120........Abrasive Disc............... 2.95 

3MAD220........Abrasive Disc............... 2.95 

More grits are available. Call for pricing. 

BELT CLEANER 

This cleaner is made of natural rubber. It 

removes abraded material that has lodged 

between the abrasive grains and dulled 

the cut. It makes the belt look and perform 

almost like new and it will add two to three 

times the normal life to the belt. 

CAT. NO. ITEM PRICE/EACH 

ABCLG......................BELT CLEANER – LARGE.........................$10.95 

3M SATIN FINISH WHEEL 6” SCOTCHBRITE 

Plastic Bushings 

This wheel is excellent for 

clean up of oxidation or corrosion 

on metals. It leaves 

a nice satin finish. The 6” 

wheel comes with one set 

of plastic bushings. 


BUF10F.........................6” DIA.,1” thick, fine................................. $43.95 

BUF10M........................6” DIA.,1” thick, medium............................ 43.95 

PLASTIC BUSHINGS for 6” SATIN FINISH WHEEL 

These are used for expanding a shaft from 1/2” dia. to 5/8”, 3/4”, and 1” 

dia. Comes three to a set. 


BU004.......................... Plastic Bushings......................................... $1.95 

3M TM POLISHING SHEETS 

For fine finishing work from 400-8000 grit. The 

sheet size is 8-1/2” x 11”. 

MICRON U.S. 

CAT. NO. GRADE MESH COLOR PRICE 

3MPS1........ 1............... 8000.......... Pale Green.... $1.25 

3MPS2........ 2............... 6000.......... Sea Green....... 1.25 

3MPS3........ 3............... 4000.......... Pink.................. 1.25 

3MPS9........ 9............... 1200.......... Blue................. 1.25 

3MPS15...... 15............. 600............ Gray................. 1.25 

3MPS30...... 30............. 400............ Green............... 1.25 

LB400 BRUSH ON COMPOUND 

This does the job of the conventional bar compound 

but with less loading of your wheels and 

less fling off. It is 400 grit and you brush or rub 

it onto the wheel and allow to dry. 


LB400.............8 oz............................. $8.95 

An excellent spray for attaching 

9” x 11” sheets to 

disc grinders. 


APSA-1.................$11.95 

BALDOR BUFFER 

Baldor is well known as the top of the line in motors as well as 

buffers and grinders. It has a full three-year warranty. These buffers 

come with the large diameter shafts and sealed ball bearings 

and the long shafts get the buffing wheels out from the motor for 

full use of the buffs. The 3/4 H.P. and smaller units come with 

eight-foot conductor cord, switch and plug. All units are shipped 

FOB Houston. We use Baldor buffers and consider them to be 

the best. When visiting our shop we will be glad to demonstrate 

them for you. 

BAL114 

BAL332B 

SHAFT SHP’S 

CAT. NO. H.P. PHASE R.P.M. DIA. WGT. PRICE 

BAL114.......1/4......1................ 1800...... 1/2”......... 22 lbs............ $295.00 

BAL332B....3/4......1................ 1800...... 3/4”......... 57 lbs.............. 563.00 

BAL407B....1.........1................ 1800...... 7/8”......... 60 lbs.............. 749.00 

CAT NO. iTEM PRICE 

ga16.......................stand......................................................... $324.00 

WHEEL RAKE 

This item is made for cleaning out the built-up material that accumullates 

on your buffing wheel. These are helpful when you want to buff a light 

color material just after buffing 

operations on brass or steel. We 

sell these rakes with the already 

attached to the rake head or just 

the rake head and you make 

the handle and install the rake 

head. The rake has 98 teeth for 

cleaning deep. 

CAT NO. iTEM PRICE 

buf18.....................WHEEL RAKE............................................... $10.95 

BUF17.....................WHEEL RAKE HEAD........................................ 5.95 

3M TM SANDING SPONGE 

The soft-back sanding sponge is 4-1/2” x 5-1/2”. 

The ultrafine pad is for fine sanding, and the 

microfine pad is the finest and it is for the last 

coat sanding. Use dry or wet. Flexible, conformable 

and long lasting. Great for sanding hard 

to reach areas. 

CAT NO. ITEM EACH 

3MSSUF......................................... Ultrafine................................... $2.60 

3MSSMF......................................... Microfine.................................... 2.60 


BUFFING AND POLISHING 

SEWN MUSLIN BUFF 3/4” THICK 

Sewn in concentric rows 3/8” apart. May be 

used in cutting and polishing operations. 


BUF01.....................4” DIA., 1/2” arbor hole.................................... $7.50 

BUF02.....................6” DIA., 1/2” arbor hole...................................... 7.95 

BUF03.....................8” DIA., 1/2” arbor hole.................................... 11.95 

BUF035...................8” DIA., 5/8” arbor hole.................................... 11.95 

BUF04.....................10” DIA., 1/2” arbor hole.................................. 18.95 

BUF045...................10” DIA., 3/4” arbor hole.................................. 18.95 

LOOSE MUSLIN BUFF ( 1/4” thick) 

One row of sewing around the arbor hole with 

20 ply construction. Their soft and flexible 

construction makes them especially useful in 

finishing operations with a very fine rouge. 

BUFFING COMPOUNDS 

JACKSON CR WHITE 

This is a chrome rouge containing 

600 grit Aluminum Oxide abrasive and 

is non-coloring. An excellent rouge 

for bringing stainless steel, brass, 

nickel/silver, horn, laminates, and 

some plastics to a bright shine. Will 

remove fine scratches. Also great for 

sealed woods. 


ABRCR...................................3 lb. block......................................... $8.50 

JACKSON 51 WHITE 

This is a non-coloring, extremely light 

cutting rouge that contains 1200 to 

1400 grit Alumina abrasive. A dry and 

clean composition that when used 

with a loose buffing wheel produces a 

terrific shine on handle material after 

using the CR rouge. Works very well 

on horn, laminates and some plastics. 

Also great for sealed woods. 


BUF11.....................6” DIA., 1/2” arbor hole.................................... $2.95 

BUF05.....................8” DIA., 1/2” arbor hole...................................... 3.95 

BUF055...................8” DIA., 5/8” arbor hole...................................... 3.95 

BUF06.....................10” DIA., 1/2” arbor hole.................................... 5.95 

BUF065...................10” DIA., 3/4” arbor hole.................................... 5.95 

FLANNEL/JEWELERS BUFF ( 1” thick) 

Sewn in concentric rows 1” apart. These 

buffs are soft and pliable and made of cotton 

flannel. 


ABR51....................................3 lb. block......................................... $8.50 

JACKSON 925 DARK GREY 

This is our fastest stainless steel cutting 

rouge. Works best at removing 

belt sanding marks after final shaping 

operations. Contents 220 grit Aluminum 

Oxide grit and works well both 

with sisal or sewn muslin buffs. 


BUF07......... 8” diameter..................... $11.95 

1/2” arbor hole 

BUF075.......8” diameter ....................... 11.95 

5/8” arbor hole 

SISAL BUFF 8” DIAMETER (1/4” thick) 

Sewn in spiral rows 1/4” apart with 7 ply sisal. 

(These are used extensively for cutting operations 

in combination with the 925 Rouge 

to quickly remove marks left by belt grinding 

operations. These work best when grouped 

in 2’s or 3’s for more stiffness. The RPM’s 

should not exceed 2000 RPM. 


BUF08.........................8” DIA., 1/2” arbor hole................................ $9.95 

BUF085.......................8” DIA., 5/8” arbor hole.................................. 9.95 

ZAM BUFFING COMPOUND 

This is a fine finishing compound. It 

leaves a high lusture without a residue. 

Great for blade steel, stones and, jewelry 

too. It will not scratch soft stones. 


ABRZAM...........1 lB................. $10.50 


ABR925..................................3 lb. block......................................... $8.50 

50% GREEN CHROME-(GREEN COLOR) 

A green chrome rouge will remove 

very fine scratches and will produce 

a mirror like finish while removing 

the cloudiness sometimes left by the 

Aluminum Oxide rouges. Approx. 700 

grit. Excellent on metals. 


ABRGC...................................2-3/4 lb. cyl...................................... $9.95 

PINK NO SCRATCH ROUGE 

This rouge can remove the cloudiness 

from the final blade polishing 

and will add some luster. It can 

improve the luster of the handle 

materials and not add color from the 

rouge as will the GC. Works best at 

1700 to 1800 RPM on a sewn buff or 

loose buff. 


ABRPN40...............................3 lb. cyl............................................. $9.95 


ADHESIVES 

EPOXY 

EPOX5SM EPOX5LG EPOX30SM EPOX30LG 

DEVCON TM clear setting 5 minute or 30 minute epoxy. 


EPOX5SM...............5 MINUTE 2 in 1 dispenser.........................................1 oz..................... $3.95 

EPOX5LG...............5 MINUTE large size - easier to use............................9 oz..................... 11.95 

EPOX30SM.............30 MINUTE 2 in 1 dispense. Waterproof.....................1 oz....................... 3.95 

EPOX30LG.............30 MINUTE large size - easier to use. Waterproof......9 oz..................... 11.95 

SUPER GLUE 

LOCTITE 

CYAN1 CYAN2 CYAN3 CYAN4 CYAN5 CYAN7 

CYAN1-Insta-set accelerator. 

CYAN2 and CYAN3-Insta-cure. Super thin 1-3 

sec. Best for closing cracks in wood or other 

repairs. Replaces Super Glue, SG1 & SG2. 

CYAN4-Insta-cure + gap filling 5-15 sec. 

CYAN5-Maxi-cure extra thick 10-25 sec. 

CYAN7-Un-cure debonder 30-120 sec. 

CAT. NO. SIZE ITEM PRICE 

CYAN1........2 oz........ Insta-set................ $4.99 

CYAN2....... 1 oz........ Insta-cure............. 4.99 

CYAN3....... 2 oz........ Insta-cure............. 8.99 

CYAN4....... 1 oz........ Insta-cure + gap.. 4.99 

CYAN5....... 1 oz........ Maxi-cure............. 5.50 

CYAN7....... 1 oz........ Un-cure................ 3.99 

SUPER GLUE GEL 

Gel is great for filling the large 

cracks that occur in burl woods 

and especially desert ironwood. 

It will take on the color of the surrounding 

material and the crack 

disappears. 


SG4............ 2 gram...........$1.95 

LT330 

LT326 

LT7649 

LT326-Speedbonder.This high performance adhesive 

sets up very strong and quick. 

LT330-Dependable no-mix adhesive. No measuring, 

it offers high impact strength, and excellent solvent 

resistance. 

LT7649-Primer. Use with Speedbonder, LT326, to 

clean surfaces on your knife and handle. When 

speedbonder is applied, you have approx. 30-60 

seconds work time before bonding begins. 


LT326..........1.69 fl. oz........................... $24.95 

LT330..........0.85 fl. oz............................. 31.95 

LT7649........1.75 oz................................. 18.95 

15 minute mid-cure 

4-1/2 oz. epoxy 

EPOXY COLORANTS 

20 minute finishcure 

4-1/2 oz. 

epoxy 


EPOX15.................. MED 4-1/2 oz..........$6.99 

EPOX20.................. MED 4-1/2 oz............6.99 

3M TM BLUE MASKING TAPE 

This blue masking 

tape is what we use 

to wrap the blades of 

our knives before we 

work on them. It protects 

the blade and 

peels off easily when 

you’re done. 

CAT. NO. 

PRICE 

3MBST..................................................... $6.95 

GLUE KIT 

Try the Glue Kit for convenience. This kit contains 

everything you need to mix the glue when 

you’re getting ready to put your knife handles on. 

There’s two sets of gloves; 1 small, 30 minute, 

2 ton epoxy; 4 stir sticks; and 2 tin trays. Order 

the kit and end the hassle. 


GLUE1................GLUE KIT.................... $4.95 

38 

SUPER GLUE 

Instant drying liquid. It will fix 

cracks in woods and laminates. 

Has many other fill in uses. 


SG3............ 2 gram.............$1.50 

These epoxy colorants work great for thin 

spacers, file work fill-in, or fillings of porous 

horn or oosik-like porous materials. 

Comes in 2 oz. bottles. Colors are white, 

blue, yellow, black, red, or green. 

CAT. NO. COLOR PRICE 

EPOX901...................WHITE.............................. $6.95 

EPOX902...................BLUE.................................. 6.95 

EPOX903...................YELLOW............................. 6.95 

EPOX904...................BLACK................................ 6.95 

EPOX905...................RED.................................... 6.95 

EPOX906...................GREEN............................... 6.95 


BOOKS 

BOOKS ON KNIVES & KNIFEMAKING 

KNIFE TALK 

The Art & Science of Knifemaking 

by Ed Fowler 

In this book, Ed Fowler talks about the theories of 

design and technique and the philosophy on the 

making of knives. Over 200 photos with 20 beautiful 

color photos of Bowies and other knives. Soft 

cover, 160 pages, informative, entertaining and 

just good reading. 

CAT. NO. 

PRICE 

PUB17......................................................$14.95 

KNIFE TALK II by Ed Fowler 

The High Performance Blade 

Featured in this book are 65 of Ed Fowler’s columns from 

BLADE Magazine on topics such as function, design, and 

technique; philosophy; and forging and heat treating. He 

also discusses industry standards, knife maintenance, 

the sheep horn style, how to grind blades, hardening 

vs. tempering, ball bearing steel, and carbon steel. 

Softcover, 8-1/2” x 11”, 200 pages, 250 b&w photos, 

8-page color section. 

CAT. NO. 

PRICE 

PUB28.....................................................$19.99 

KNIVES 2009 29th Annual Edition 

Edited by Joe Kertzman 

Blade Magazine’s publisher presents the latest edition 

of KNIVES 2009 filled with 1000’s of brilliant color 

photos of the best knives around. Whether your tastes 

run from the splendid world of inlays of precious metals 

and gems, to the sleek utilitarianism of the tactical knife 

world, you’ll find it in this book. There is a directory of 

custom knifemaker’s in each state, knifemakers associations’ 

membership lists, related services and supplies. 

Softcover. 8-1/4” x 10-7/8”. 312 pages. 

CAT. NO. 

PRICE 

PUB11-2009............................................$27.95 

CUSTOM KNIFEMAKING 

by Tim McCreight 

Here is a book with step by step details on 10 

knifemaking projects. 75 photos and 100 drawings. 

An excellent book to start with as a new 

maker. Softcover, 224 pages. 

CAT. NO. 

PRICE 

PUB12.....................................................$23.95 

HOW TO MAKE KNIVES 

by Bob Loveless and Richard Barney 

The ultimate source on making knives. You can 

make a quality knife by following these instructions. 

This is a book to take to the shop with you 

as you work. Softcover, 182 pages, 448 B&W 

photos. 

CAT. NO. 

PRICE 

PUB03.....................................................$14.99 

STEP-BY-STEP KNIFEMAKING 

“New Edition” by David Boye 

Accomplished knifemaker includes details that 

other writers often overlook. There are 169 photos 

and 215 illustrations. Every phase of knife making 

is covered including blade etching, sheath making 

and a lesson on steels. Softcover. 

CAT. NO. 

PRICE 

PUB04.....................................................$21.95 

THE WONDER OF KNIFEMAKING 

from the Publishers of Blade Magazine 

Master smith Wayne Goddard is a full-time maker, 

teacher and writer. Goddard works as hard to 

teach knifemaking skills as he does to acquire 

them. This book is a compilation of Goddard’s 

columns & advice, as it has appeared in Blade 

Magazine over the past several years. Softcover, 

158 pages, 15 pages of knives in color. 

CAT. NO. 

PRICE 

PUB19....................................................$ 19.95 

$50.00 KNIFE SHOP, Revised 

by Wayne Goddard 

Get Started Without Spending a Fortune 

This is a great companion to The Wonder of 

Knifemaking. Learn about selecting steel, forging, 

grinding, heat treating and finishing knives, without 

the huge and expensive tools found in some 

shops. Includes how to make wire Damascus. 

Softcover, 160 pages, 250 color photos. 

CAT. NO. 

PRICE 

PUB24....................................................$ 19.99 

THE PATTERN-WELDED BLADE 

by Jim Hrisoulas 

Jim Hrisoulas shares his years of experience. Includes 

forging basics, precise patterns, and some 

stunning, complex designs. This book reveals the 

secrets of this ancient craft from the welding of the 

starting billet to the final assembly of the complete 

blade.Softcover, 120 pages. 

CAT. NO. 

PRICE 

PUB15.................................................... $ 30.00 

100 LEGENDARY KNIVES 

by Gerard Pacella 

is a beautiful book with 300+ color photos. This 

book traces the evolution of knives from ancient 

times to now. Leisure knives, professional knives, 

hunting and fishing knives and combat knives 

are collected together in this book that is a must 

have for the knife enthusiast. It also makes a 

wonderful gift. Hardcover, 144 pages, 9.5” x 

11”, in full color. 

CAT. NO. 

PRICE 

PUB30...................................................$ 29.99 

HOW TO MAKE A TACTICAL KNIFE 

by Don Robinson 

Are you a home shop machinist, and are you interested 

in making knives? Let experienced knife maker, tool 

and die designer, and manufacturing engineer, Don 

Robinson, show you how to make a full tang straight 

knife, and a Kydex sheath from start to finish. Use the 

following machine tools to create the knife: a vertical 

mill, vertical band saw, belt grinder, drill press, vertical 

oscillating sander, sand blaster, bead blast cabinet, and 

heat treat furnace. 68 pages, 99 black and white photos, 

spiral bound, 8-1/2” X 11”, softcover. 

CAT. NO. 

PRICE 

PUB31.................................................. $ 24.95 


BOOKS 

40 

MY WAY 

A Toolmaker’s Method for Locating and Fitting 

the Lock and Detent on a Linerlock R Folder 

by Don Robinson 

If you are an experienced custom made knifemaker and 

have at least attempted to make one of these folders, 

then this book may be of help to you. The methods 

outlined in this book will guide you in making a well 

made, reliable, precision knife with a solid, dependable 

lock-up that can be disassembled and re-assembled 

without losing alignment and fit. 42 pages, softcover, 

35 black and white photos. 

CAT. NO. 

PRICE 

PUB32................................................... $24.95 

BLADE’S GUIDE TO MAKING 

KNIVES 

Edited by Joe Kertzman 

Fusing the expertise of seven of the best knifemakers 

in the world, BLADE’s Guide to Making Knives is an unrivaled 

how-to for blade enthusiasts! Gain professional 

tips for grinding blades, crafting hunting knives, forging 

pattern-welded steel into intricate designs, making folding 

knives, fashioning the important bolster between 

knife and blade. Features detailed instructions and 

250 striking color illustrations. Soft cover, 160 pages, 

250 color photos. 

CAT. NO. 

PRICE 

PUB35....................................................$24.99 

ART OF THE KNIFE 

by Joe Kertzman 

Every photo is exquisite! Custom creations from the 

world’s top knife makers. Showcases 500 of the world’s 

finest art knives made. These are the artist’s knivessculpted 

cutting machines embellished with scrimshaw, 

engraving, gold, precious stone inlays, carving and 

etching. It’s a parade of pearl, ivory, mammoth tooth, 

Damascus, silver wire, exotic wood, diamonds, rubies 

and more. It will definitely be an inspiration for artists 

and knifemakers alike. Softcover, 254 pages. 

CAT. NO. 

PRICE 

PUB37....................................................$35.00 

HANDLES & GUARDS 

by Joe Keeslar 

ABS Mastersmith, Joe Keeslar, is a master craftsman 

in metals, wood, and leather. This book’s primary purpose 

is to provide students of the American Bladesmith 

Society’s Handles and Guards class with guidelines for 

completing the forged knife. However, the manual will 

benefit any knifemaker who makes their own blades or 

buys the blade blank and wants to put his own handle 

material, guards, bolsters, etc. on the knife. The manual 

describes handle material, bolsters, guards, collars, butt 

caps, engraving and more. Soft cover, spiral bound, 84 

B&W detailed illustrations, 127 pages. 

CAT. NO. 

PRICE 

PUB39....................................................$39.95 

BLADE’S GUIDE TO KNIVES & 

THEIR VALUES 

edited by Steve Shackleford 

If you are into buying, selling and/or trading knives, then 

this is the book for you. There is pricing information for 

tens of thousands of collectible knives from antiquity 

to the present. The knives have been illustrated with 

detailed photography and illustrations from the original 

manufacturer’s catalogs.There are feature-length articles 

by the world’s foremost knife and cutlery experts. 

Contains thousands of illustrations and descriptions to 

help you identify and date virtually any knife. Black and 

white illustrations, soft cover, 576 pages. 

CAT. NO. 

PRICE 

PUB39....................................................$39.95 

KNIVES & RAZORS 

This 7th Edition identificatiion and value guide will increase 

your expertise in identifying collectible cutlery. 

It is a necessary publication if you plan to invest in 

collectible knives and razors. The book contains 504 

pages. There are 32 pages of beautiful color photos 

of cutlery plus 472 B&W pages containing 1000’s of 

photos of knives and razors plus their value and a 

lot of information on knife patterns, blade types, tang 

stamps, and handle materials. Also includes a DVD 

containing an electronic version of the complete book. 

Softcover + DVD. 

CAT. NO. 

PRICE 

PUB43................................................... $27.99 

BOOKS ON Scrimshaw 

HOW TO SCRIMSHAW 

AND CARVE IVORY 

by Blackie Collins. 

This is a 45-page book full of detailed instructions on 

just about anything you might want to carve or scrimshaw. 

It is good on methods. Softcover. 

CAT. NO. 

PRICE 

PUB09.....................................................$8.95 


by Ron Newton 

The author, Ron Newton, has over 20 years experience 

as a scrimshander. He has taught at various schools 

and events while continuing to perfect his techniques 

and skill. His book has information about the history 

of scrimshaw, laws about ivory, safety, polishing and 

working ivory, tools, getting started, steps to a completed 

project and more. Softcover, 6” x 9”, 59 pages, 

20 b&w photos. 

CAT. NO. 

PRICE 

PUB36.................................................... $12.95 

BOOKS ON SHARPENING 

RAZOR EDGE SHARPENING 

by John Juranitch 

How to get the best edge possible. Answers the most 

frequently asked questions. A good book with step 

by step instruction on sharpening. Over 250 detailed 

photographs and drawings. Softcover,143 pp. 

CAT. NO. 

PRICE 

PUB13.................................................. $ 21.95 

RAZOR EDGE 

World’s First Video on Sharpening 

Let the champions from the Guinness Book of World 

Records show you how to sharpen a blade! This video 

reveals the secrets of the cutting edge. It will show you 

how even a novice can do unbelievable things when 

they understand the simple secrets of sharpening. 

CAT. NO. 

PRICE 

VIDEO13................................................ $11.95 

SHARPENING MADE EASY 

by Steve Bottorff 

This book reveals the sharpening techniques needed 

for everything from razor blades to axes. Whether you 

require a sharp slicer for the kitchen or a sturdy chopper 

for the field, this book will show you how to get the edge 

you need. Softcover, 96 pp. 

CAT. NO. 

PRICE 

PUB25....................................................$11.95 


BOOKS & DVDS 

BOOKS ON WHITTLING 

THE LITTLE BOOK OF WHITTLING 

by Chris Lubkemann 

Learn whittling from whittler, Chris Lubkemann, who 

has 40 years of whittling experience. Relax and 

try your hand at creating the whimsical and useful 

projects that are in his book. There are 18 projects 

to try. Lots of pictures and illustrations are included. 

It is softcover, 6" wide x 9" high, and has 97 pages in 

color. This is a fun book, and would make a nice gift 

for anyone old enough to use a knife. 

CAT. NO. 

PRICE 

PUB42................................................... $12.95 

BOOKS ON FORGING 

THE MASTER BLADESMITH 

by Jim Hirsoulas 

The latest and finest forging book now available. In the 

same style as his first publication except that this is the 

advanced edition for advanced Smiths. Softcover with 

286 pages and full size. 8-1/2” x 11”. 

CAT. NO. 

PRICE 

PUB08................................................... $46.00 

THE HAND FORGED KNIFE 

by Karl Schroen 

An introduction to hot working steel. All the skills you 

need to forge, harden and temper 12 modern tool steels 

used today. It has136 pages of really good information 

on forging knives. It has many good and useful tips. 

CAT. NO. 

PRICE 

PUB06....................................................$16.95 

THE COMPLETE BLADESMITH 

by Jim Hirsoulas 

This is the complete book on forging. Questions you 

have not thought of asking are answered for you. How 

to do the things you have always wanted to do with a 

forge, but did not have the nerve to try. Many new blade 

patterns, Damascus Steel, how to use and make tools. 

Hard cover with 100 illustrations and 58 photos for a 

total of 179 pages and full size 8-1/2” x 11”. 

CAT. NO. 

PRICE 

PUB07................................................... $44.95 

VIDEOS 

THE FINE ART OF HOLLOW 

GRINDING 

by Johnny Stout 

Watch as legendary Texas knifemaker, Johnny Stout, 

walks you through the finer points of hollow grinding. 

Johnny grinds both fixed blades and folders. Great for 

the beginner or professional knife maker. 1 hour and 

29 minutes. 


DVD1...................... DVD..........................$35.00 

CUSTOM KNIFE SHEATHS 

by Chuck Burrows 

Chuck Burrows of Wild Rose Trading Company takes 

you step by step through making a Hunter and a Mexican 

Loop sheath. learn expert techniques on stamping and 

carving. This DVD is packed with information on custom 

knife sheath making. 3 hours and 55 minutes. 


DVD2...................... DVD......................... $45.00 

FILEWORKING 

by Dwayne Dushane 

Fileworking master, Dwayne Dushane, takes 

you step by step through 3 different designs of 

fileworking: the S pattern, the Vine pattern and the 

Rope pattern. 2 hours and 13 minutes. 


DVD3...................... DVD......................... $40.00 

SCULPTING 

by David Broadwell 

Custom knife maker, David Broadwell, shows you 

techniques he has used to create some of his 

exotic knives. He takes you step by step through 

some of the most common aspects of sculpting 

and texturing a blade. 1 hr. and 59 min.) 


DVD4...................... DVD......................... $35.00 

MAKING A SUB-HILT FIGHTER 

with S.R. Johnson 

Learn how to make a sub-hilt fighter from scratch. Join 

Steve Johnson as he teaches you how to create and 

customize your own sub-hilt fighter. In this video you 

are taken step-by-step through the entire process from a 

piece of bar stock to a piece of art. Pictorials are included 

to give you a feel for what you can accomplish. Two disc 

set, color, 3 hr. and 48 min. 


DVD5...................... DVD......................... $45.00 

KYDEX BASICS 

featuring Darrel Ralph & Ryan Bailey 

The fundamentals of Kydex knife sheath and gun holster 

making is brought to you by expert makers, Darrel Ralph 

and Ryan Bailey. They will guide you through the process 

of designing, forming and finishing your own custom 

knife sheaths and gun holsters. DVD-color-approx. 

time-60 min. 


DVD6................. DVD.............................. $29.95 

PARACORD WRAP 

featuring Phil Hine, Instructor 

Learn the secrets of basic paracord wrapping techniques 

with Phil Hine. Watch and learn as Phil demonstrates two 

of his favorite paracord wrapping styles, the “Shoestring” 

and the “Twist”. Phil steps you through the basics of the 

cord tying procedures of these outstanding wraps. DVD, 

Color. Approx. 45 min. 


DVD7...................... DVD......................... $24.95 

FIXED BLADE KIT ASSEMBLY 

featuring Darrel Ralph 

Follow the world’s leading custom knife and modern knife 

kit designer, Darrel Ralph, as he guides you through the 

step-by-step process of building your own fixed blade kit. 

Darrel will take you through the steps of assembling the 

Delta 5, a dual bolster fixed blade with handles, using hidden 

bolt handle pins.DVD-Color-Approx. 60 min. 


DVD8...................... DVD...........................$29.95 


VIDEOS and DVDS 

BASIC DAMASCUS 

with Ed Caffrey, A.B.S. Mastersmith 

Watch as ABS Mastersmith Ed Caffrey shows you how to 

get solid results with your Damascus billets. He will show 

you processes that will allow you to make one good blade 

after another. Includes stock removal methods and tips 

on etching. Ed shows you refined techniques for creating 

bird’s eye pattern, a ladder pattern, a twist pattern, and a 

random pattern. Color, 83 min. 


DVD9...................... DVD............................ $35.00 

MOSAIC DAMASCUS 

with Ed Caffrey, ABS Mastersmith 

In this video, ABS Mastersmith, Ed Caffrey will show you 

some of the most common Mosaic Damascus patterns. 

The information is easy to understand, and will allow you 

to take the “next logical step” towards producing your own 

Mosaic Damascus. Ed covers how to create a radial pattern, 

a basket weave pattern, a jelly roll pattern, and how 

to do an “accordion” fold. DVD-Color-1hr.49 min. 


DVD10.................... DVD............................ $45.00 

LOVELESS LEGEND 

by R.W. Loveless 

An informative and intertaining narration by Mr. Loveless 

takes you through all the steps in the making of one of his 

most popular models. 1hr. 35min. 


VIDEO2....................VIDEO........................ $21.95 

FORGING DAMASCUS 

by Jim Hrisoulas 

This is a two tape series which shows 

how to forge Damascus steel and shape 

blades by showing you visually the 

subtleties that are hard to demonstrate 

in a book. 


VIDEO3.........Part 1 & 2...... $29.95 

THE DESIGN, CONSTRUCTION & 

FUNCTION OF THE USING KNIFE 

(52100 STEEL); BEARING TO BLADE 

TO FINISH KNIFE 

with Ed Fowler 

122 minutes of information on knifemaking techniques. 


VIDEO4................ VIDEO........................... $45.00 

RECREATIONAL KNIFE 

THROWING 

by John Bailey 

John Bailey has over 40 years of knife throwing experience. 

He will show you how to throw everything from 

bayonets to scissors. Advanced techniques. 39 minutes 

of entertainment. 


DVD11...................DVD.............................. $23.00 

THE WIRE DAMASCUS HUNTING 

KNIFE (How to do it) 

by Wayne Goddard 

How to make the wire damascus hunting knife. Weld the 

billet, forge it to shape, grind and heat treat the blade. 

Finish grind and etch, attach the handle, sharpen and 

enjoy. 

CAT. NO. 

PRICE 

DVD12.......................................................$29.95 

KNIFE CARE 

with Jerry Fisk 

Learn how to properly care for and maintain your knife 

from Jerry Fisk, a master bladesmith. He will share his 

knowledge and his methods for sharpening various types 

of knives correctly. Also, he will show you how to care 

for your knives so that they will retain their value. A very 

informative video. 


VIDEO11................. VIDEO..................... $29.95 

Japanese Cord Wrapping 

with Kirby Lambert 

Learn the secrets of Japanese Cord Wrapping with a 

professional custom knife maker, Kirby Lambert. Follow 

Kirby’s expert guidance as you go from start to finish 

through the amazing process of Japanese cord-wrapping 

technique, learning through hands-on demonstration and 

detailed explanation. This video is a must-see for anyone 

aspiring to recreate the beauty and versatility of one of 

the world’s oldest handle wrapping techniques. (DVD 

Color-Approximately 60 minutes) 


DVD14..................... DVD......................... $29.95 

THE ELECTROLYSIS OF METAL- 

WORKING, ANODIZING, ELECTRO- 

ETCHING, AND GOLD PLATING 

with Bob Warner 

Watch as custom knifemaker and toolmaker Bob Warner 

teaches you the secrets to building your own anodizer, 

electro-etcher, and gold plating machine. With this video, 

you will gain the knowledge to enhance and color your 

own titanium used commonly for bolsters and liners. Embellish 

your work by putting multiple colors on one piece 

of metal. Also, make custom stencils and do your own 

electro-etching. And finally learn how to put gold plating 

on copper for your exciting gold wire inlays. 


DVD15..................... DVD......................... $40.00 

AN INTRODUCTION TO KNIFE 

ENGRAVING 

with Ray Cover 

Engraving is a favorite way to embellish any personal 

item such as a knife, gun, or writing pen. It gives the item 

a distinctive look and feel that adds a uniquely personal 

touch. 2 disc set. 


DVD16.................... DVD........................... $40.00 

42 


INTRODUCTION TO KNIFE 

SHARPENING 

with Murray Carter 

Murray Carter worked in Japan for over 18 years as a rural 

village bladesmith. He has the unique distinction of becoming 

the 17th Generation Yoshimoto Bladesmith. He has 

made over 12,000 knives and hand sharpened more than 

40,000 blades of all shapes and sizes. He lives in Oregon 

now and is rated a Master Bladesmith by ABS, In this 

video, Murray Carter shows you what you need to know in 

order to become an expert in sharpening knives. 


DVD17.................... DVD........................... $45.00 

ADVANCED BLADE SHARPENING 

TECHNIQUES 

With Murray Carter 

Murray Carter is a 17th Generation Yoshimoto Bladesmith 

who lived and worked as a bladesmith in Japan for over 

18 years. In this video you will learn advanced sharpening 

techniques from the master: 6 Step Sharpening Procedure 

• Kata-Ha Sharpening • Tanto Blade Re-Grinding • Using 

Stones So They Wear Evenly • Shortcomings of Guides 

& Jigs • Function of Polishing Sludge • What to do with 

Serrations • Effect of Angled Micro-Serrations on Slice • Pitting 

on Carbon Steeled Blades. The video includes forging 

footage from his shop and a shaving demonstration. 


DVD18.................... DVD........................... $35.00 

BASIC BLADESMITHING 

With Ed Caffrey 

A.B.S. Mastersmith 

“The Montana Bladesmith” 

Join ABS Mastersmith Ed Caffrey at the forge as he walks 

you through Basic Bladesmithing. If you are a beginner, 

this video will help you develop the foundation necessary 

for forging your own blades. If you are already familiar 

with the forge, Ed’s methods will help you enhance the 

quality of your work. 


DVD19.................... DVD........................... $35.00 

FORGE WELDING CABLE DAMASCUS & 

STRIPED CABLE DAMASCUS 

with Gene Osborn (2 Disc Set) 

Watch as Gene Osborn walks you step by step through 

the process of forge welding cable Damascus. He will 

show you techniques that will allow you to “work smarter, 

not harder”. On disc two, Gene reveals his secrets on 

forge welding striped cable Damascus. You will learn the 

secrets needed to turn an ordinary piece of steel cable into 

a striking Damascus billet or blade. DVD is in color with a 

running time of 123 minutes, English, no subtitles. 

CAT. NO. 

PRICE 

DVD20....................................................... $45.00 

MAKING A D-GUARD BOWIE 

with Harvey Dean 

A.B.S. Mastersmith (2 Disc Set) 

The D-Guard Bowie is a legendary battle weapon, part 

sword, part knife. The powerfully balanced design makes 

it a favorite tool for many tasks. Harvey Dean has revealed 

his secrets and improvements for making a more 

secure and artful D-Guard Bowie in this 2 disc video. The 

more you watch this video, the more your knifemaking 

skills will improve. Harvey Dean is one of the most sought 

after teachers in this craft and he enjoys the craft as much 

as he enjoys teaching. Color, 3 hr. 13 min., full screen 

format, 2 discs, English, no subtitles. 

CAT. NO. 

PRICE 

DVD21.....................................................$45.00 

DVDS 

THE LOCKING LINER 

with Don Robinson 

The Locking Liner 2-disc DVD by Don Robinson shows 

you how to make your own Barlow style locking liner knife. 

The video is almost four hours long. Instructions on the 

video include everything you need to know to make your 

knife. You are shown from start to finish how to transform 

the raw materials into cutlery art. A template for the knife is 

included. Length: 3 hr. and 46 min., color, full screen. 


DVD22.................... DVD........................... $45.00 

FLAT GRINDING 

With Harvey Dean 


The most popular grind for working knives is the Flat 

Ground blade. Harvey Dean will demonstrate and explain 

his methods of flat grinding perfect blades. Learn the 

geometry, checkpoints, and repair methods needed to 

grind flat blades with remarkable success.Harvey Dean, 

A.B.S. Mastersmith, has been handcrafting knives since 

1981. He has taught knifemaking through seminars and 

college courses, and now you can learn his methods in 

your own home with this DVD. Length: 1 hr. and 48 min., 

color, full screen format. 


DVD23.................... DVD........................... $35.00 

THE QUILLION OF QUALITY 

With Jerome Anders 


If you are interested in making the Quillion dagger as 

required for the ranking of A.B.S. Mastersmith, then this 

is the DVD for you. American Bladesmith society Mastersmith, 

Jerome Anders, teaches you how to make the 

dagger. The Quillion dagger is the toughest challenge 

the American Bladesmith Society has for impeccable 

workmanship. Jerome Anders goes above and beyond 

the requirements and explains each step in detail. This 

dagger won Best Art Knife at the Ohio Valley Knife Show 

just two weeks after its conception and the filming of this 

video. In this video you will learn: the proper way to flute 

handles, the forming of the quills and how to make them 

equal on each side, and the fit up and finishing techniques 

that will help you to pass your A.B.S. Quillion test with 

confidence. Two disc set, length: 3 hrs. and 6 minutes, 

color, full screen format. 


DVD24................ DVD (2 DISC SET)........ $45.00 

AUTOMATIC CONVERSION 

featuring Jonathan Musick 

Follow along as Jonathan Musick shows you the secrets 

to automatic knife conversion. He converts an over-thecounter 

manual button lock knife into a coil spring fired, 

one hand opener automatic. Color, approximately 40 

minutes. 

CAT. NO. 

PRICE 

DVD25.......................................................$24.95 

THE DDR3 TM BUTTON LOCK FOLDER KIT 

See page 50 for 

more information 

on this blade kit. 

Blade Length: 3.60” Closed Length: 4.50” Overall Length: 8.10” 

The kit comes standard with a 600 grit satin finished blade and pre-radiused 

bolsters; stainless hardware and liners for a high-strength precision fit; 

hardened AUS8 blade steel that is cryo tempered. 


BLDDR3BL................ (1) Base Parts Kit (no handle scales)...................................$56.95/ea 

BLDDR3BL-5............. (5 pack special) - Base parts Kits (no handle scales)...............52.95/ea 


SHEATHS 

LEATHER KNIFE SHEATHS 

These sheaths are precision sewn and made of very high grade 8/9 oz. cowhide with a welt in the seam so the blade does not cut the threads. 

Soft enough so that most handles will slide in for that final water fitting. Some sheaths are constructed for particular blades, but will fit many more. 

Compare the blade lengths to the ones listed for the sheaths. Snaps are included, but not attached to the strap. 

SHEATHs 1, 2, 3, 4, 5 SHEATHs 6, 7, 8, 9, 10 sheath 14 SHEATH 23 

1 

2 3 4 5 

CAT. # ITEM PRICE 

she1 

she2 

SHEATH #1 – Fits the filet 

blade BLSFS7 and BL070 

(blade length of 6-1/2” to 7”) 

SHEATH #2 - Fits the blade 

$15.95 

15.95 

she3 

she4 

she5 

BL411, BL412, BL483, BL545 

and many more. Opening is 

7-3/4” deep and 1-7/8” wide. 

SHEATH #3 - Fits the BL409, 

BL410, BL482, and BL545. 

Opening is 6-3/4” deep and 

1-3/4” wide. 


BL422, BL431, BL465, BL475, 

BL481 and BL706. 


BL170. Opening is 5-1/4” deep 

and 1-3/8” wide. 

15.95 

15.95 

15.95 

SHEATHs 18, 19, 20, 21, 22 

6 7 8 9 10 


she6 SHEATH #6 – Fits narrow $15.95 

she7 

she8 

she9 

she10 

blade. Opening is 5-3/4” deep 

and 1” wide. 

SHEATH #7 - Snap across. 

Fits blades 4” long like the the 

BL466. 


Fits blades 5” long like the 

BL156. Opening is 5-1/4” 

deep and 1-3/8” wide. 


Fits blades 6” long like the 

BL160. Opening is 6-1/4” 

deep and 1-1/2” wide. 

SHEATH #10 - Fits blade 

BL528. 

15.95 

15.95 

15.95 

15.95 

SHEATHs 11, 12, 13, 15, 17, 16 


she14 

she23 

SHEATH #14 – Fits BL471 

and other similar blades. 

Snap around or snap over the 

guard models available. 


BL478. It has a snap over 

flap. 

$29.95 

15.95 

sheath FOR TEXAS FILLET 

This is the sheath that fits the BL707C. Inside 

opening is 1-3/8” x 13-1/2”. 


SHE-TEX SHEATH FOR $17.95 

BL707C 

sheath 24 

18 19 20 21 22 

11 12 13 15 17 16 

This sheath fits boot blade, BL459, and has a 

clip for your convenience. 


SHE24 SHEATH FOR $16.95 

BL459 

UNIVERSAL TACTICAL SHEATH 


she18 

she19 

she20 

she21 


BL530. 


BL546. 

SHEATH #20 - Fits BL537. 

SHEATH #21 - Pouch type 

$15.95 

15.95 

15.95 

15.95 

sheath. Width is 1-3/4” and 

depth is 5-1/2”. 

she22 SHEATH #22 - Fits folder knife. 15.95 

Width is 2” and depth is 5”. Sheath has a fold 

over flap and comes in a natural color. Snap 

included, but not attached. 

44 


she11 

she12 

she13 

she15 

she17 

SHE16 

SHEATH #11 – Fits BL450 

and many more. Opening is 

1-3/4” wide and 7-1/4” deep. 


BL447 



SHEATH #17 - Fits BL060 

SHEATH #16 - Fits BL706, 

BL475, BL431 and others. 

$15.95 

15.95 

15.95 

15.95 

15.95 

15.95 

sheath 25 

Universal tactical sheath fully adaptable to 

M.O.L.L.E./P.A.L.S. vests. Inner plastic sheath 

fits blade sizes up to 1-3/4” x 8-1/4” x 3/16”. Overall 

sheath size is 15” x 2-3/4” and comes with a 

storage pouch and numerous belcro straps. It 

can be worn on belt or combat vest. 


SHE26 Sheath $15.95 

Fits hatchet, BLCHO1. The dimensions for the inside opening of 

the sheath are 4-1/4” at the top and 1-1/2” at the bottom for the 

handle. 


SHE25 Sheath for BLCH01 $19.95 


LEATHER AND SHEATH MAKING SUPPLIES 

LEATHER 

STINGRAY SKIN 

Black stingray skin. 

Leather shoulder 


LS1.........................6-7 oz................. $8.95 FT. 

LS2.........................8-9 oz................... 9.95 FT. 

LEATHER RING SPACER 

Approximately 1/8” 

thick x 1-1/4” x 1” 

oval with a small rectangular 

hole in the 

center to slide over 

the tang. 

CAT. NO. 

PRICE 

LR1.................................................... $0.25 EA 

Leather balm 

with atom wax. 

This balm will 

help you clean, 

preserve, polish 

and restore 

smooth leather 

articles. 

LEATHER BALM 


FLB.........................4 oz.......................... $5.95 

REVOLVING PUNCH PLIER 

EDGE KOTE 


STING2........................... 16” long, 8” wide....................................$44.95 

STING3........................... 12” long, 7” wide......................................34.95 

For color coating leather 

edges. Black. 


FEKBL.........4 oz............... .$8.50 

LEATHERCRAFT CEMENT 

The best all-purpose 

cement you can buy. 

Flexible, non-flammable 

adhesive. Waterproof. 

Quickly and 

permanently bonds 

leather and kydex. 


TBCC......................4 oz.......................... $6.95 

LEATHER WATER BASED DYES 

LEATHER DYE 

Leather dye. Quart 

container. Comes 

in USMC Black 

and Light Brown. 


FLDBL................USMC Black............. $24.95 

FLDLB................Light Brown................. 24.95 

LEATHER SHEEN 

Shines and conditions 

leather with a flexible 

wax finish. 

CAT. NO..... ITEM PRICE 

FLSA.......... 12 oz........$12.95 

note: This product can be 

shipped ground only. 

ALL IN ONE LEATHER STAIN 

For making round holes in leather, 

plastic and similar material. 


PL72.......................PUNCH PLIER....... $12.95 

NEATSFOOT OIL 

Neatsfoot oil is for finishing 

your sheath after water 

shaping the leather to fit 

your knife. It is excellent for 

softening and darkening 

leather. 4 ounce bottle. 


NEAT1...........4 oz.............$2.95 

Eco-Flo Leather dye in Coal Black. 

Water based product line for leather 

that is enviromentally friendly. 


FPOST..................Canyon Tan................ $7.95 

(replaces Fiebing’s Oil Dye, Saddle Tan.) 

FPOBL..................CoalBlack.................... 7.95 

(replaces Fiebing’s Oil Dye, Black 

FPODB..................Dark Cocoa Brown....... 7.95 

(replaces Fiebing’s Oil Dye, Dark Brown.) 

Eco-Flo all in one stain and finish. 


LFADB............4 oz. Fudge Brown........... $9.95 

(replaces Fiebing’s All In One Dark Brown.) 

LFAM..............4 oz. Cherry Chocolate...... 9.95 

(replaces Fiebing’s All In One Mahogany.) 

LFAT...............4 oz. Prairie Tan................. 9.95 

(replaces Fiebing’s All In One Tan.) 

WOOL SWABS 

Great for applying dye or neatsfoot oil to sheaths. Sold 

individually or by a pack of 20. 

CAT. NO. AMOUNT PRICE 

NEAT2 1 $0.25 

NEAT20 20 3.00 


SHEATH MAKING SUPPLIES 

SPACE MARKER 

This handy tool marks your spacng before you hand sew to keep your stitches even. 

Three sizes; #5 = 1/4” between stitches, #6 = 3/16” between stitches and 

#7 = 1/8” between stitches 

CAT. NO. ITEM 

PRICE 

MARK1.........Space maker #5....................$9.50 

MARK2.........Space maker #6......................9.50 

MARK3.........Space maker #7......................9.50 

MARK4.........All in one space marker........22.95 

Size 5,6,7 

SNAPSETTERS 

SHEATH SNAP SETS 

HAND STITCHING KIT 

snapset1 

This setter consists of 1 setter pouch 

and 1 anvil designed to set the snaps 

sold with our leather sheaths and 

kydex eyelets.The anvil has a concave 

side and a flat side. SNAPSET1 is for 

the 1/8” kydex eyelets & leather sheath 

snap sets. SNAPSET2 is for the 1/4” 

kydex eyelets. 


SNAPSET1......... Snap setter................. $ 6.95 

SNAPSET2......... Snap setter................. $ 7.95 

AUTOMATIC SEWING AWL KIT 

46 

snapset2 

Great starter kit for leather, canvas, 

etc. Sews a lock stitch just like a 

machine! Kit includes black thread (2- 

1/2yds), one straight and one curved 

diamond point needle, wrench and 

instructions. 

CAT.NO. SIZE PRICE/EA 

ASAK..................Sewing Awl Kit ......... $16.95 

BLKT...................Thread 1(Black)........... 4.50 

BRNT..................Thread 2(Brown).......... 4.50 

WHTT..................Thread 3 (White).......... 4.50 

ADJUSTABLE GROOVER 

The adjustable groover is for use in leather 

work. Guaranteed to measure and gouge 

grooves in one step. Widths adjust from 

1/16” to 3/4”. With hardwood handle and 

metal ferrule. 

CAT.NO. ITEM PRICE/EA 

LG1.....................Leather Groover ........$11.95 

4 brass or silver-plated pieces make up 

a set. This four-piece set is the hardware 

needed to install a snap on a sheath. Sold 

by 1 set or by package of 50. 


SNAP1S........SILVER.............................. $0.75 

SNAP1B.......BRASS................................. 0.75 

SNAP50S......SILVER 50 PACKAGE....... 27.95 

SNAP50B.....BRASS 50 PACKAGE....... 27.95 

BLACK EYELET KIT 

This eyelet kit is intended for use in .060 

Kydex. The package contains 100 (3/16” 

dia.) black eyelets, 1 cobalt #14 drill, 1 set 

eyelet setting punches and instructions. 

CAT. NO. 

PRICE 

EYELETKIT........................................... $23.95 

LEATHERWORK MANUAL 

by Al Stohlman, 

A.D. Patten & 

J.A. Wilson 

This book gives a history 

of leatherwork, leather 

tools and how to use 

them, leather fabrication, 

techniques of structural 

assembly, leather dyeing, 

and three leather 

work projects (keycase, 

billfold, and handbag 

with patterns provided). 

Softcover, 160 pages, 

over 100 black and white 

illustrations. 

CAT. NO. 

PRICE 

PUB26................................................... $17.95 

Loaded with all the basic tools for hand 

stitching. Learn dozens of hand stitching 

techniques. Includes: overstitch 

wheel, stitching awlhaft, three blades, 

groover needles, thread, beeswax and 

The Art of Hand Sewing Leather by Al 

Stohlman. Al Stohlman introduces to a 

variety of stitching techniques and provides 

you with valuable information on 

the tools and materials needed to get 

you started. Softcover, 72 pages. 

CAT. NO. 

PRICE 

LSK1...................................................... $64.95 

Publication only 

PUB38..................................................... 14.95 

MAKING LEATHER CASES 

Vol.1 by Al Stohlman 

This book introduces you 

to the various methods of 

making patterns, and forming 

leathers over wooden 

forms. Included are patterns 

for knife cases and 

pocket knife cases. There 

are lots of helpful illustrations 

to help you make 

your leather piece. 

CAT. NO. 

PRICE 

PUB27................................................... $19.95 

LACING & STITCHING FOR 

LEATHERCRAFT 

This book explains punching 

lacing holes using thonging 

chisels, lacing nippers, 4-in- 

1 hole punch, overstitch 

wheels, mini punch, and 

rotary punch. It shows two 

prong needles, hook and 

eye needles, and life eye 

needles and how to use 

them. There is a page on 

splicing plus ten different 

lacing and stitching techniques 

with lots of black and 

white illustrations showing 

how to do them. Softcover, 

21 pages. 

CAT. NO. 

PRICE 

PUB33.....................................................$5.99 


KYDEX SHEATH MAKING SUPPLIES 

CHICAGO SCREW 

7/16” head 

CAT. NO. 

PRICE/EACH 

CHICAGO1 $.50 

RIVET PRESS & DIES 

KYDEX SHEATH MAKING KIT 

The sheath making kit contains everything you 

need to make a quality kydex sheath: 

1-12 x 12 piece of .08 kydex material (cell/ 

smooth finish), 1-Ball chain 20 lb. pull (breaking 

strength). 10-(8-8 black rivets). Requires a .25 

inch hole in the sheath for fastening. 

1-Custom Preformed Kydex Belt Loop with 

fastening hardware. 


KYSK1................. Kydex Sheath Kit.....$11.95/ea. 

CARBON FIBER PATTERNED 

CONCEALEX 

Our heat moldable .06 and .093 gauge carbon 

fiber patterned concealex sheet material is top 

quality. This material forms between 160 and 

300 degrees. 


CXCF-126........Concealex (.06) 12”x12”........$9.95/ft. 

Carbon Fiber Pattern 

CXCF-1293......Concealex (.093) 12”x12”......10.95/ft. 

FOAM TO MAKE 

KYDEX SHEATH MOLD 

A one inch thick, black PVC foam that is ideal 

for making Kydex sheath molds. 

CAT. NO. SIZE PRICE/EA 

KYDFO............... 12” X 12” X 1”............... $11.95 

KYDEX EYELETS 

Rivet Flaring Dies 

Available in nickel plated, black painted, or brass. The 1/8” eyelet (used for .60” 

Kydex) has a height of 0.197”, ID is 0.125”, OD is 0.144”. The 1/4” eyelet (used for 

.60” or .90” Kydex) has a height of 0.256”, ID is 0.241”, OD is 0.261”. 

CAT. NO. ITEM PRICE/PKG. 

KYDEYE1.......... EYELET BLACK- SMALL 1/8” dia. hole (50/pkg.).................$2.25 

KYDEYE2.......... EYELET BLACK- LARGE 1/4” dia. hole (20/pkg.)..................1.75 

KYDEYE3.......... EYELET SILVER- SMALL 1/8” dia. hole (50/pkg.)..................2.25 

KYDEYE4.......... EYELET SILVER- LARGE 1/4” dia. hole (20/pkg.)..................1.75 

KYDEYE5.......... EYELET BRASS- SMALL 1/8” dia. hole (50/pkg.)...................2.25 

KYDEYE6.......... EYELET BRASS- LARGE 1/4” dia. hole (20/pkg.)..................1.75 

Our professional rivet flaring dies and unique press system will put a permanent end to split rivets 

when fastening Kydex together in your sheath making process, or in any use where professional 

fastening is required. This system will help you create the perfect “flare side” to help you add the 

“professional” touch to your work. The 8-8 rivet is what is used for Chicago Screws. Note: The 

#8 Rivets require a .25 inch hole (1/4) drilled in the Kydex for rivet fastening. The #6 Rivets require 

a .187 inch hole (3/16) drilled in the Kydex for rivet fastening. 


KYRD6.......#6 (3/16) Rivet Flaring Dies............ $34.95/ea. 

KYRD8.......#8 (1/4) Rivet Flaring Dies.................34.95/ea. 

KYRPRS.....Kydex Rivet Press.....................89.95/ea. 

(no dies incl.) 

KYDEX BELT LOOP SYSTEM 

Custom pre-formed kydex belt loop with fastening 

hardware (vertical/horizontal) carry. 

CAT. NO. 

PRICE/EA. 

KYSBL1................................................... $6.95 

Kydex Rivet Press 

Drop Ship Only 

KYDEX-CONCEALEX SHEATH MOLDING PRESS 

This 12” x 8” or 24” x 8” kydex-concealex sheath maker 

is built from rugged 1/4” steel plate. The professional 

forming system is perfect for making either flat-faced 

(one-sided), or a full fold-over (wrapped style) sheaths. 

The top plate is removable for height adjustment. 

Footer holes are pre-drilled so that the press can be 

mounted to a bench. 



KKSMP-12..........Sheath Molding................$99.95 

Press (12”x8”) 

KKSMP-24.......... Sheath Molding...............159.95 

Press (24”x8”) 

BLACK COATED 

KYDEX RIVETS 

These black coated brass 

Kydex rivets are the highest 

quality available and are designed 

for use in the flaring 

press. We have these in 3 

sizes. They are perfect for all 

types of fastening use. 


KYSR66...........6-6 (3/16) black rivets.......$10.00/100 

(100 count) for .060 Kydex 

KYSR88...........8-8 (1/4) black rivets...........12.00/100 

(100 count) for .060 

and .080 Kydex 

KYSR89...........8-9 (1/4) black rivets...........14.00/100 

(100 count) for .090 Kydex 

KYDEX SHEATH MATERIAL 

Kydex is a tough sheath making material. It is waterproof and does not stain, shrink, 

rot or lose it’s color or shape. It is heat formed and available in black. It comes in 

.060” or .090” thicknesses. The instructions for forming the Kydex will be enclosed 

with your order. We stock this material as a one (1) square foot sheet (12” x 12”) or 

two (2) square foot sheet (12” x 24”). Larger sections are also available. Please let 

us know which size you would prefer. 

CAT. NO. ITEM PRICE/SQ.FT 

KYDEX1.......................060” Thick................................................... $6.50 

KYDEX2.......................090” Thick..................................................... 8.50 


KNIFE CASES AND POUCHES 

KNIFE CASES 

These are an alternative to the sheath 

for those knives that will not be used, 

but displayed. Also, use it as a carrying 

case that will safely protect that special 

knife. Made of nylon cordura with polyfoam 

padding, soft fabric interior and 

YKK nylon zipper. They are available 

in black exterior. Dimensions are inside 

measurements. 


KC001.....................3” x 10”..................... $6.95 

KC002.....................4” x 13”....................... 6.95 

KC003.....................4” x 16”....................... 7.95 

KC004.....................5” x 19”....................... 8.95 

KC005.....................3” x 8”......................... 6.95 

FOLDERCASE.......1-1/2” x 5”................... 5.95 

60-KNIFE ROLL CARRY CASE 

BLACK CORDURA FOLDER POUCH 

These small pouches 

are perfect for 

your belt. They are 

lightweight and 

have a Velcro closure. 


FSM.........................Sm. Pouch............... $4.95 

FSL.........................Lg. Pouch................... 4.95 

SMALL LEATHER KNIFE CASES 

Made of black 

l e a t h e r, t h e s e 

knife cases are 

soft and supple. 

The sheep skin 

lining cushions the 

blade. 


KCL001..............2” x 5”........................... $9.95 

KCL002..............2-3/4” x 6”....................... 9.95 

12-SLOT KNIFE CARRY CASE 

BAMBOO DISPLAY BOX 

This bamboo storage/display box has a 

glass top and cutouts for your folders. 

The size of the box is 5-1/2” x 5-1/2” 

x 1-1/8” deep. Keep your folders safe 

and display them at the same time. 


BAMCASE1.......CASE.......................... $12.95 

BAMBOO STORAGE BOX 

Beautiful large bamboo storage box 

lined with dark blue velvet over foam 

cushion. The size of the box is 14” long 

x 10” wide x 3-1/8” deep. 

This black nylon case will carry 60 

knives all rolled up for convenience 

when you’re traveling. A handle makes 

it easy to carry. Inside is a brown velour 

lining to showcase your folders 

and protect them from scratches. It 

measures 18” wide x 29” long when 

opened. 


RKC-1................KNIFE ROLL............... $21.95 

48 

After you’ve made or collected all of 

your folder knives, you need something 

to carry them in. This is the perfect 

carry case. It’s 6” x 12” x 13” and has 

room for 12 knives. The case is made 

of black nylon canvas and it is padded 

on the inside with soft dura-fleece. It 

keeps your knives secure and protected 

from scratches. The flap folds 

over and is secured with Velco. 


DRKC-1...................12 Slot.................... $14.95 

Knife Carry Case 

SMALL STINGRAY POUCHES 

A stunning stingray 

folder pouch 

is a great way to 

carry and protect 

your folder. 


KCSR01.............1-1/2” x 4-1/2” O.D...... $15.95 

KCSR02.............1-1/2” x 5-1/4” O.D........ 19.95 


BAMCASE3.......CASE.......................... $39.95 

DISPLAY CASES 

These cases are a perfect place to 

store your favorite knives. Available 

in oak, walnut or cedar. They are 12” 

long x 9” wide. Please specify red or 

green felt. 


WDCASE................Case....................... $45.00 


FOLDER KITS 

FLX-25 FRAME-LOCK FOLDER KIT 

The kit contains all of the parts necessary to complete the framelock 

folder kit including the cocobolo dymondwood handles. This 

kit is easy to assemble and is an excellent piece for learning 

basic assembly, frame-lock design, file work training, liner test 

treatments and overlay experimentation. Because of the base 

design simplicity, it is also a great kit for beginners, requiring no 

modification to produce a great knife. Full stainless frame-lock 

design with open-spacer backspine. Blade steel is AUS 8 which 

has been heat treated to 56-58 rc. The pivot is stainless steel and 

the washers are nylon. 

Blade Length: 2-3/4 Inches 

Handle Length: 4-1/2 Inches 

Overall Length: 3-3/4 Inches 

BLFL006 FRAME-LOCK FOLDER KIT 


BLFL006............ Frame Lock Folder Kit (Single).................................................... $16.95/ea 

(includes 1 set Dymondwood handle scales) 

BLFL006-5.........Frame Lock Folder Kit (5 Pack)(Includes 5 sets of Dymond-..........74.75 (5) 

wood handle scales) 



BLFLX25............... FLX-25 Frame Lock Folder Kit (Single)............... $18.95/ea 

(includes 1 set standard finished cocobolo 

Diamondwood handles) 

BLFLX25-5........... FLX-25 Frame Lock Folder Kit (5 Pack)................ 16.25/ea 

(Includes 5 sets of standard finished cocobolo 

Diamondwood handles) 

FRAME-LOCK FOLDERS 

Bead blasted blade, AUS-8 stainless steel, cryo-treated to 56-58 rc. 

Blade 3-3/8” long, overall length of 7-3/4”, handle 4-1/2” long. Dymondwood 

handles are pre-milled and polished. 

The pivot is stainless steel (pass-through) and the washers are nylon. There is a 

standard pocket clip included and a pivot wrench. 

These kits come with all the parts needed to put together the frame-lock folder. 

This an easy kit for beginners, but also can be modified with file work. Full stainless 

frame-lock design with open-spacer backspine. It is fun to assemble, and a 

great knife for the money. Choose the handle design that appeals to you. 



BLFL009.............FL009 Frame Lock Folder Kit (Single)........................................ $16.95/ea 

(includes 1 set standard finished cocobolo handles) 

BLFL009-5.........FL009 Frame Lock Folder Kit (5 Pack)......................................... 14.95/ea 

(Includes 5 sets of standard finished cocobolo handles) 

POCKET CLIP ASSEMBLY KIT 

Clip Assembly Kit - Allows clip to be mounted in 

bolster. Kit includes 3 extra long 1-72 Torx bolster 

screws, tap handle, 1-72 tap and drill. 

CAT. NO. 

PRICE 

DDRCAK $19.95 

TIGERSTRIPE RESINWOOD 

Enhance the look of your frame lock folder by using tigerstripe resinwood 

to make your own unique handles. Resinwood is made from resin impregnated 

natural wood with beautiful depth and color. It is easy to work 

and polish and does not need a sealer. Available only as scales which 

are 3/8” thick. 

WINEWOOD SCALES 

(SINGLE COLOR) 

DW80S............................... $11.95/PR 

WALNUT SCALES 


DW81S................................$11.95/PR 


BLFL001.............Frame Lock Folder Kit (Single)....................................................$16.95/ea 


BLFL001-5.........Frame Lock Folder Kit (5 Pack)(Includes 5 sets of Dymond-............74.95 (5) 


COCOBOLO SCALES 


DW82S................................$11.95/PR 

DESERT CAMO SCALES 

(MULTICOLOR) 

DW83S................................$11.95/PR 

RIO GRANDE APPLEWOOD 

SCALES (MULTICOLOR) 

DW84S................................$11.95/PR 


BLFL005.............Frame Lock Folder Kit (Single)..................................................$16.95/ea 


BLFL005-5.........Frame Lock Folder Kit (5 Pack)(Includes 5 sets of Dymond-.......... 74.75 (5) 

BLUE LAGOON SCALES 

(MULTICOLOR) 

DW85S................................$11.95/PR 


FOLDER KITS 

The new DDR2 TM Modern Bowie and the DDR2 TM Tanto are the 2nd generation 

of the highly popular DDRII locking liner folder kit, introduced in 

2000 by Darrel Ralph. There are many new refinements in these updated 

versions with the high-performance design and quality you’ve come to 

expect in Darrel Ralph’s kits. The parts and fittings are precision machined 

and designed for maximum builder performance. The liners are stainless 

steel and heat treated for low wear. The ball detent is pre-installed, the 

lock is pre-bent, the steel is AUS-8 and has been cryogenically treated 

to 56-58 rc hardness and the blade has been bead blasted and has a 

high-satin finish. 

Blade Length: 2.45 Inches 

Handle Length: 3.335 Inches 

Overall Length: 5.77 Inches 

THE DDR2 TM MODERN BOWIE 

LOCKING LINER GENTS FOLDER KIT 


BLDDR2-MB......... (1) DDR2 TM Modern Bowie Base Parts Kit ............................$36.95/ea 

(no handle scales) 

BLDDR2-MB5....... (5 units) - DDR2 TM Modern Bowie Base parts Kits ..................34.95/ea 

(no handle scales) 

THE DDR2 TM TANTO 

LOCKING LINER GENTS FOLDER KIT 

THE DDR3 TM LOCKING LINER FOLDER KIT 

BLDDR3-RR 

BLDDR3-TACS 

The DDR3 TM series locking liner kits by Darrel Ralph represent the culmination 

of precision development in the kit industry. You can match the 

blade and bolster shapes that you prefer, and create your own personal 

style folder. The blade length on the DDR3-TACS and the DDR3-RR is 

3.60 inches. The closed length is 4.5 inches and the overall length is 8.1 

inches. The blade has a 600 grit satin finished blade and pre-rounded 

bolsters. The liners are stainless steel. All of the components are heat 

treated for a lifetime of use. 


BLDDR3-RR............(1 unit) Base Parts Kit(no handle scales)............................. $46.95/ea 

Recurve Blade/Curved Bolster 

BLDDR3-RS ............(1 unit) Base Parts Kit(no handle scales)............................... 46.95/ea 

Recurve Blade/Straight Bolster 

BLDDR3-TACR........(1 unit) Base Parts Kit(no handle scales)............................... 46.95/ea 

Tactical Blade/Curved Bolster 

BLDDR3-TACS........(1 unit) Base Parts Kit(no handle scales)............................... 46.95/ea 

Tactical Blade/Straight Bolster 

THE DDR3 TM LOCKING LINER GUTHOOK KIT 


BLDDR2-TA.......... (1) DDR2 TM Tanto Base Parts Kit (no handle scales)................$36.95/ea 

BLDDR2-TA5........ (5 units) - DDR2 TM Tanto Base parts Kits (no handle scales).......34.95/ea 

THE DDR3 TM BUTTON LOCK FOLDER KIT 

The DDR3 TM series button lock folder kit will offer the builder more options 

in performance with the button locking system design. This kit will only be 

offered in the above bolster configuration Designed by Darrel Ralph to be 

the finest quality kit available, with the added functionality of the button 

lock system (with standard safety switch), you’ll have to look hard to find 

a better knife for the money. The kit comes standard with a 600 grit satin 

finished blade and pre-radiused bolsters; stainless hardware and liners 

for a high-strength precision fit; hardened AUS8 blade steel that is cryo 

tempered; plus a precision fit and finish throughout. The DDR3-BL model 

offers a choice for the builder that allows the creation of a perfect knife for 

the job, or for the ultimate commisssioned project piece with a twist. 

Blade Length: 3.60 Inches 

Closed Length: 4.50 Inches 

Overall Length: 8.10 Inches 


BLDDR3BL................ (1) Base Parts Kit (no handle scales)...................................$56.95/ea 

BLDDR3BL-5............. (5 pack special) - Base parts Kits (no handle scales)...............52.95/ea 

The new DDR3 TM series locking 

liner Gut Hook Skinner Kit by Darrel 

Ralph is the most modernized skinning 

folder kit on the market. The 

profile is sleek and works great for 

all skinning chores. 

Mechanism Type: Locking Liner • Blade Steel: AUS 8 (Heat/Cryo-Treated) • Blade 

Finish: 600 Grit Satin • Blade Style: Gut Hook • Blade Length: 3.50 Inches • Closed 

Length: 4.50 Inches • Overall Length: 8.10 Inches • Liners: Stainless Steel (Heat 

Treated) 


BLDDR3-GR............(1 unit) DDR3 Gut Hook Blade/Curved Bolster.......................$46.95/ea 

Base Parts Kit (no handle scales) 

BLDDR3-GS............(1 unit) DDR3 Gut Hook Blade/Straight Bolster.......................46.95/ea 

Base Parts Kit (no handle scales) 

GX6 TM LOCKING LINER GENT’S POCKET DAGGER 

The GX6 TM is a Locking Liner Gent’s Dagger, designed by Darrel Ralph 

for the hobbyist that likes a sleek, more stylized design. All parts and fittings 

of this premium folder kit are precision machined. The blade length 

is 2.75 inches and the overall length is 6.25 inches. The blade steel is 

AUS-8 and has been cryogenically treated to 56-58 rc. Satin bead blast 

finish only. The liners are heat treated stainless steel. The GX6 TM will not 

come pre-drilled on the bolster or liners for a clip. 


BLGX6............ (1) Base Parts Kit (no handle scales).........................$44.95/ea. 

BLGX65.......... (5 pack special) - Base parts Kits (no handle scales).....39.95/ea. 

50 


FOLDER KITS 

GPC-1000 TM LOCKING LINER FOLDER 

3-1/2” TRAPPER 

The GPC-1000 TM is a liner lock designed for the hobbyist that likes a sleek, 

stylized design. It is designed to look good as a “high-tech” piece, with 

standard micarta, G-10 or carbon fiber scales, or as a “high-finish” model 

with materials, such as pearl, exotic woods and with embellishments on 

the liners and bolsters. The blade steel is AUS-8 and has been cryogenically 

treated to a 56-58 rc. Satin bead blast finish only. The blade length 

is 2.75 inches, and the overall length is 6.5 inches. The liners are heat 

treated stainless steel. 


BLGPC............ (1) Base Parts Kit (no handle scales)..............................................$44.95/ea 

BLGPC5.......... (5 pack special) - Base parts Kits (no handle scales)..........................39.95/ea 

THE TALON LOCKING LINER 

3-1/2” trapper with two satin finished 2-3/8” blades. Includes brass liners, 

nickel silver bolsters and pins. Cryogenically treated. Handle material 

not included. 


BL1583................................... 3-1/2” TRAPPER KIT..................... $24.95 

4-1/8” TRAPPER 

The Talon is a sleek 2-tone stainless steel and black liner lock. It is 3-3/4” 

closed and has a stainless steel handle with groves and a pocket clip. 

The folder kit has parts which are easy to assemble and the kit is perfect 

for the beginning or experienced knifemaker. After assembly, you will find 

that the blade opens smoothly and effortlessly. 


BL201.......................Locking Liner Kit.......................................... $24.95 

4-1/8” trapper with two satin finished 3” blades. Includes brass liners, 

nickel silver bolsters and pins. Cryogenically treated. Handle material 

not included. 


BL1582................................... FOLDER KIT................................. $29.95 

EXTRA LARGE TRAPPER 

MODERN INLAY FOLDER 

This modern locking liner 

kit comes with two inlays of 

black G10 handle material 

on each side. The kit is recommended 

for beginning to 

advanced knifemakers. 

The overall length of the 

folder is 6”, the blade length 

is 2.5”, the closed length is 

3.5”. The blade is made of 

440 stainless steel (RC 52- 

55) and has a bead blasted 

finish. The washers are 

nylon. All of the parts and instructions 

are included to put 

together the basic kit.Takes 

a Torx T6 and T8 which are 

not included. 


BLGI13.....................Locking Liner Kit.......................................... $24.95 

This is our very popular, extra large trapper with nickel-silver bolsters 

attached to stainless liners. The finished folder make’s a fine rancher’s 

trapper. The blade is 3-1/2” long, and it’s made of high quality, 440 stainless 

steel which has been cryogenically treated. The knife is 8” overall 

when open, and 4-1/2” closed. The kit includes pins, springs and thong 

hole tubing. Handle material not included. 


BL1163................................... FOLDER KIT................................. $31.95 


FOLDER KITS 

3-1/2” LOCKBACK 

HEAVY-DUTY LOCKBACK 

This is a sleek clip point blade. The handle has front and back nickel/silver 

bolsters. 6-1/4” overall open. 3-1/2” closed. Satin finished. Cryogenically 

treated. Handle material not included. 


BL1158.....................3-1/2” LOCKBACK KIT................................ $23.95 

SATIN FINISH LOCKBACK 

This heavy-duty lockback has a 3-1/4” satin finished hollow ground blade 

with brass liners, nickel silver bolsters and pins. It measures 3-1/2” closed 

and the overall length is 7-1/2”. Fits pouch, Cat. No. SHE22. Cryogenically 



BL1162.....................3-1/2” DROP POINT.................................... $34.95 

HEAVY-DUTY DAMASCUS LOCKBACK 

3” closed, 5-1/2” overall length with a satin finished, flat ground, 2” blade. 

It comes with nickel silver bolsters, liners, pins and tubing. Cryogenically 



BL1159.....................3” SMALL LOCKBACK KIT.......................... $26.95 

4” LOCKBACK 

This lockback is the same as BL1162 except that it has a beautiful 

3-1/4” hollow ground Damascus laminate blade. Overall length is 7-1/2”. 

Fits pouch, Cat. No. SHE22. Cryogenically treated. Handle material not 

included. 


BL1162D...................3-1/2” DROP POINT DAMASCUS............... $94.95 

On Sale for $75.95 

3-3/4” LOCKBACK 

7” overall length open, 2-1/2” satin finished flat ground blade with nickel 

silver bolsters, liners, pins and thong hole tubing. Cryogenically treated. 

Handle material not included. 


BL1165.....................4 “ LOCKBACK KIT..................................... $29.95 

52 

3-3/4” lock back, 6-1/2” overall open with a 2-1/2” satin finished, clip point, 

hollow ground blade. Includes nickel silver bolsters and pins with brass 

liners. Cryogenically treated. Handle material not included. 


BL1166.....................3-3/4” LOCKBACK KIT................................ $31.95 


FOLDER KITS 

LITTLE HAWK LOCKBACK 

BAMBOO DISPLAY BOX 

The Little Hawk Lockback kit has a 2-1/2” satin finished, hollow ground 

blade that is made of 6A steel with vanadium added. It has been cryogenically 

treated for additional toughness and edge holdng. The bolsters and 

liners are nickel/silver. The knife is 3-5/8” when it is closed and 6-3/8” when 

open. Handle material not included. 


BL1667.....................LITTLE HAWK LOCKBACK KIT..................$24.95 

THE GAMBLER LOCKBACK 

This bamboo storage/display box has a glass top and cutouts 

for your folders. The size of the box is 5-1/2” x 5-1/2” 

x 1-1/8” deep. Keep your folders safe and display them at 

the same time. 


BAMCASE1........................... BAMBOO CASE............................. $12.95 

SMALL STINGRAY POUCHES 

A stunning stingray folder 

pouch is a great way to carry 

and protect your folder. 

Lockback, 4-1/8” closed, 7-1/8” overall length. This kit includes 2-3/4” 

satin finished blade, nickel silver bolster material, brass liner and pins. 

Cryogenically treated. Handle material not included. 


BL1164.....................THE GAMBLER LOCKBACK KIT................ $28.95 


KCSR01................................. 1-1/2” x 4-1/2” O.D......................... $15.95 

KCSR02.................................1-1/2” x 5-1/4” O.D............................ 19.95 

60-KNIFE ROLL CARRY CASE 




today!! 


This black nylon case will carry 60 knives all rolled up for 

convenience when you’re traveling. A handle makes it easy 

to carry. Inside is a brown velour lining to showcase your 

folders and protect them from scratches. It measures 18” 

wide x 29” long when opened. 


RKC-1....................................KNIFE ROLL...................................$21.95 


FOLDER HARDWARE & SUPPLIES 

BUTTON HEAD TORX SCREWS - SS 

SIZE CAT. NO. PRICE/10 CAT.NO. WRENCH PRICE/50 

0-80X1/4...S01X10.....$3.50....... S02X50.......... T5............ $12.95 

1-72X1/4...S03X10 ......3.50....... S04X50.......... T5.............. 12.95 

2-56X1/4...S05X10 ......3.50....... S06X50.......... T6.............. 12.95 

FLAT HEAD TORX SCREWS - SS 


0-80X1/4 S07X10 $3.50 S08X50 T5 $12.95 

1-72X1/4 S09X10....... 3.50 S010X50 T5 12.95 

2-56X1/4 S011X10..... 3.50 S012X5 T6 12.95 

SOCKET HEAD TORX SCREWS -SS 


0-80X1/4.. S013X10....$3.50.......S014X50........T5............$12.95 

1-72X1/4.. S015X10......3.50.......S016X50....... T6..............12.95 

2-56X1/4.. S017X10......3.50.......S018X50....... T7..............12.95 

BRONZE BUSHINGS FOR FOLDER BLADES 

This little guy fits between the main blade pin and the blade so that the 

bushing rolls on the pin instead of the blade rolling on the pin. Makes for 

smooth action and the blade does not cut or drag on the pin and comes 

with a 1/8” dia. hole . 

CAT. NO. SIZE QTY PRICE 

BU001........ 1/4” dia. x 1/4” long......... 1............ $0.55 

BU00120.... 1/4” dia. x 1/4” long......... 20............ 9.00 

BU00150.... 1/4” dia. x 1/4” long......... 50.......... 17.50 

BU002........ 1/4” dia. x 1/8” long......... 1.............. 0.55 

BU00220.... 1/4” dia. x 1/8” long......... 20............ 9.00 

BU00250.... 1/4” dia. x 1/8” long......... 50.......... 17.50 

BU003........ 3/16” dia. x 1/4” long....... 1.............. 0.55 

BU00320.... 3/16” dia. x 1/4” long....... 20............ 9.00 

BU00350.... 3/16” dia. x 1/4” long....... 50.......... 17.50 

POCKET CLIP BLANKS 

BUTTON HEAD TORX SCREWS -SS 

SIZE CAT. NO. ITEM PRICE 

4-40(.208 head)........ 440BHT25...............PKG./25........................ $6.95 

4-40 (.1875 head)..... 1875BHT25.............PKG./25.......................... 6.95 

6-32........................... 632BHT25...............PKG./25.......................... 6.95 

Hard gold plate. 99%, 24k with Cobalt. 

SIZE CAT.NO. PRICE/10 CAT.NO. WRENCH PRICE/50 

0-80X1/4..... SG1X10...........$10.95............SG2X50............ T5.....................$24.95 

1-72X1/4..... SG3X10.............10.95............SG4X50............ T5.......................24.95 

2-56X1/4..... SG5X10.............10.95............SG6X50............ T6.......................24.95 

54 

BUTTON HEAD TORX SCREWS - GOLD PLATED 

FLAT HEAD TORX SCREWS - GOLD PLATED 



0-80X1/4..... SG7X10...........$10.95............SG8X50............ T5.................... $24.95 

1-72X1/4..... SG9X10.............10.95............SG10X50.......... T5...................... 24.95 

SOCKET HEAD TORX SCREWS - GOLD PLATED 



0-80X1/4..... SG13X10.........$10.95............SG14X50.......... T5.....................$24.95 

1-72X1/4..... SG15X10...........10.95............SG16X50.......... T6.......................24.95 

TORX WRENCH FLAG STYLE 

CAT. NO. WRENCH PRICE 

TW01................T5.........................$4.95 

TW02................T6...........................4.95 

TW03................T7...........................4.95 

TW07................T8...........................4.95 

TORX WRENCH SOLID HANDLE 

CAT. NO. WRENCH PRICE 

TW04................T5................$7.95 

TW05................T6..................7.95 

TW06................T7..................7.95 

TW08................T8..................7.95 

STOP PINS 

Precision ground and heat treated. 


SP01................................... 3/32” X 3/8”.......................................... $0.95 

SP02................................... 1/8” X 3/8”.............................................. 0.95 

SP03................................... 3/16” X 1/2”............................................ 0.95 

TITANIUM POCKET CLIP BLANKS 

Blanks are 1/4” wide at the narrow end, 9/16” 

wide at the wide end, with an overall length of 

2-3/4” long. 

CAT. NO. 

PRICE 

CLIP01............................................................................................. $3.95 

Small size is 2-1/8”L x 3/8”W. 

Large size is 2-13/16”L x 7/16”W. 


CLIP02.................... SMALL POCKET CLIP BLACK....................... $3.95 

CLIP03.................... SMALL POCKET CLIP POLISHED................... 4.95 

CLIP04.................... LARGE POCKET CLIP BLACK......................... 4.50 

CLIP05.................... LARGE POCKET CLIP POLISHED.................. 5.50 

SPRING MATERIAL 

Work hardened 302 stainless steel in three sizes. Tough enough for the 

spring tension you want for your folders to work properly. Bendable for 

easy adjustment to fit almost any situation. Soft enough to be filed to proper 

width or thickness for adjusting tension. 


SM001............... 0.088” wide x .062” thick x 12” long....................... $1.35 

SM002...............0.120” wide x .062” thick x 12” long......................... 1.35 

SM003...............0.170” wide x .062” thick x 12” long......................... 1.35 

PROFESSIONAL TORX WRENCHES 

These single pro Torx wrenches are the 

best we’ve found for the money. They are 

made in Germany and have a rotating rear 

cap holder that allows you to spin the screw 

while holding the wrench tight, straight and 

firm. They are made from hardened steel 

and have highly visible impact resistant 

handles. 


PTW5.................................... Size T5..............................................$8.95 

PTW6 ................................. Size T6............................................... 8.95 

PTW7 ................................ Size T7............................................... 8.95 

PTW8 ................................ Size T8............................................... 8.95 

PTW10 .............................. Size T10............................................. 8.95 

PTW68 ................................. Size T6/T8 Combo Set......................16.95 

TORX MULTITOOL 

This Multi Tool has T5, T6, T7, T8, 

T9, T10, T15, T20, and T25 Torx 

Keys. The keys fold in when you are 

not using them. 


TORX1........MULTITOOL.......$16.95 


FOLDER HARDWARE & SUPPLIES 

NYLOTRON WASHERS 

CAT. NO. ITEM PRICE/PAIR 

WASHN01.......Hole 1/8”, OD 1/4”............$0.50 

WASHN02.......Hole 7/32”, OD 1/2”............0.50 

WASHN03.......Hole 3/16”, OD 1/2”............0.50 

PRECISION PIVOT 

ASSEMBLY STUD 

This stud was designed for minumum 

space in a folder assembly. 

The stud head is the same size 

as a 2-56 socket head cap screw. 

The ream size is .125. Under the 

stud head is a .001 increase in 

size to make the stud a semipress 

fit to hold it in place while 

tightening the screw. 

CAT. NO. 

PRICE 

DRPPAS1................................................ $4.95 

3/16 PRESS FIT PIVOT STUD 

These pivots have a 3/16” diameter 

with the head at .205 to 

work with a 4-40 button head 

on the opposite side. 

CAT. NO. 

PRICE 

DRPFPS1................................................ $4.95 

82 DEGREE COUNTERSINK 

For flat head screws. Double ended 1/4” shaft, 

high speed steel. 

CAT. NO. 

PRICE 

DRCS25................................................... $9.95 

DETENT BALL BEARINGS 

440C stainless 

steel. 1/16”. 


BB01X100............. 100......................... $15.00 

THREAD LOCKER 

Thread Locker by Devcon 

keeps nuts and bolts tightly 

fastened. Waterproof. Remove 

nuts and bolts easily 

with ordinary tools after using 

Thread Locker. 3oz. size. 

CAT. NO. 

PRICE 

TL01........................... $3.00 

PHOSPHOROUS-BRONZE 

WASHERS 

The larger washers are designed to fit a 3/16” 

pivot pin in any folding knife or balisong on the 

market. They help the blade to become more 

ridged in the handle, reducing sde-to-side play, 

while producing the smoothest action and slippage 

available. The small size 5/32” washer fits 

a .162 pivot. 


PBW316-1......Pkg. of 1 set*(3/16”)... $1.79/set 

PBWS532-1....Pkg. of 1 set *(5/32”).... 1.79/set 

*1set = 2 washers 

PRECISION PIVOT ASSEMBLY 

This assembly is for the advanced 

knifemaker who wants 

a Smooth action. The ream 

size is .1875. The bushing is 

fitted within .0002 to slip-fit the 

stud. The bushing is made from 

hardened stainless steel. The 

barrel o.d. is .310. 

CAT. NO. 

PRICE 

DRPPK1..................................................$5.50 

UNIVERSAL THUMBSTUD SYSTEM 

The small UTS is .16 dia. x .20 height. The large 

is .25 dia. x .20 height. You can easily customize 

them to your own design. 


DRUTS-1................ Small.................. $4.95/ea. 

DRUTL-1................ Large.................... 5.95/ea. 

STEP PIVOT PINS 

pp02 

PP03 


PP02 ...........1/4” x 3/16” x 6-32 tap... $2.50/ea. 

PP03............3/16” x 1/8” x 2-56 tap..... 2.50/ea. 

BARREL PIVOT PINS 


PP01...........1/8” X 1/2” X 2/56” tap... $2.50/ea. 

PP05...........1/4” X 1/2” X 8/32” tap..... 2.50/ea. 

1 barrel, 2 screws/set 

PRECISION STEP DRILLS 

These drill bits are designed to drill out holes and 

recesses to fit the fasteners, rivets, Torx, and 

other specialized screws we sell. The step drills 

we sell are not jobber quality tools. These are 

made to our rigid specifications using American 

Twist Drills and are very well made and precise. 

We do not recommend using them on steel or 

metal, but these are perfect for handle making 

and other precision uses. 

DRSTB56 

DRSTS56 

DRSTB72 

DRSTS72 

DRSTB80 

DRSTS80 


DRSTB56.... #19, button head 2-56............. $15.95 

DRSTS56.... 5/32 x 3/32, 2-56 socket head....15.95 

DrSTb72.... 5/32 x 3/32, 1-72 buton head.....15.95 

DRSTs72.... #31,1-72 socket head.................15.95 

DRSTb80.... 7/64 x 0.065, 0-80 buton head...15.95 

DRSTS80.... #38,0-80 socket head.................15.95 

TAP & TAP WRENCH 


TAP01..................... 0-80......................... $9.95 

TAP02..................... 2-56........................... 9.95 

TAP03..................... 1-72........................... 9.95 

TAPW...................... Tap Wrench............... 9.95 

STAINLESS STANDOFF 

CAT. NO. 

PRICE 

SF01.................................... $0.95 

THREAD LOCK THUMB BOBS 

This item makes folders easy to open with one 

hand. It consists of a stainless steel knurled nut 

and a stainless steel screw with Allen head. The 

nut is about .200” o.d. and 3/8” long. The screw 

needs a .080 dia. hole to slide through and 

tighten up in the nut. Use #44 drill. Sold per set. 

Set consists of (1) nut and screw. 


TB101.....................Pkg. of 1 ................ $0.95 

TB102.....................Pkg. of 25................ 18.95 


STAINLESS STEEL FILLET BLADES 

FINEST FILLET BLADE OR KIT 

BASS TOURNAMENT FILLET 

Example shown uses Blue Lagoon Tiger Sripe Resinwood handle material. 

Tiger Stripe Resinwood is an upgrade and will add to the cost of the 

kit. Please call for kit price. 

Dymondwood scales in your choice of color and 30 min. epoxy included 

in kit. 

Available as blade 

or kit with blade. 

The BLADE is 12” overall 

length, 7” long blade, 

3/4” wide and just under 

1/8” thick, flat ground 

and satin finished, 440C 

stainless steel. Even, 

1-7/8” of serrations for 

heads and tails. Holes 

for all bolts or rods are 

3/16” diameter. Thong 

hole is 1/4” diameter. Use 

guard GN546. 

The KIT consists of blade, GN546 nickel/silver guard, (3) 3/16” diameter 

nickel/silver pins cut to fit, (1) 1/4” nickel/silver thong hole tubing cut to fit, 

Dymondwood handle material (3/8” thick x 1-1/2”wide x 5” long) in your 

choice of color, 30 minute epoxy and instructions on how to assemble 

your knife. BLADE FITS SHEATH #19. 


BL546.................... BLADE ONLY................................................. $19.95 

BL546C.................. BLADE W/CRYOGENIC TEMPERING............ 23.45 

BL546K.................. BLADE KIT....................................................... 31.95 

BL546KC............... BLADE KIT W/CRYOGENIC TEMPERING..... 35.45 

GN546.................... #546 GUARD-slotted and predrilled to fit........... 9.95 

SHE19.................... SHEATH #19.................................................... 15.95 

IDAHO TROUT FILLET 

Example shown uses a stabilized wood handle material. Sheath has been 

finished with neatsfoot oil. 

11-1/2” over all length, 6-1/2” blade, 1/2” wide and 1/16” thick. This knife 

has a blade of superior 8-A stainless steel and is hollow ground. Has good 

tang shape with three holes for pins of 1/8” diameter. FITS SHEATH #1. 

Handle material not included. 


BL070.................... BLADE ONLY................................................... $9.95 

BL070C.................. BLADE W/DEEP CRYOGENIC....................... 13.45 

TEMPERING (-305 o F) 

This sheath fits blades BL070 and BLSFS7 or blade length of 6-1/2” to 7”. 


SHE1............................. SHEATH #1............................................. $15.95 

SALMON FILLET 

10-1/4” overall length, 5-1/2” blade, 1” wide at ricasso and 1/16” thick. Flat 

ground and mirror polish makes this blade just perfect. Extra flexible 8-A 

stainless steel blade is truly the trout fisherman’s dream. Nice tang with 

three holes for 1/8” diameter pins. FITS SHEATH # 17. Handle material 

not included. 


BL060.................... BLADE ONLY................................................. $11.50 



EAST BAY FILLET 

Carbon Damascus full tang fillet. The blade has an overall length of 11-1/2” 

with a 6-1/2” blade length, 5/8” width and 1/8” thickness. The blade is made 

of 1075/15N20 in a twist pattern. Pin holes are 5/32”. Use SHEATH #1. 


BLS-28...........................BLADE ONLY ....................................... $125.50 

STEELHEAD FILLET 

12-1/4” overall length, 7” blade, 3/32” thick, 440C stainless steel. Flat 

ground and satin finished. Good looking and functional upswept tip with 

a neat pistol grip handle with very good tip flexibility. All eight holes take 

3/32” diameter pins. The forward holes are for a bolster if you want. FITS 

SHEATH #12. 


BL447.................... BLADE ONLY................................................. $17.95 



56 

Carbon Damascus full tang fillet. The blade has an overall length of 9-1/2” 

with a 5” blade length, 5/8” width and 1/8” thickness. The blade is made 

of 1075/15N20 in a twist pattern. Pin holes are 5/32”. Sheath not available 

at this time. 

Cat. No. Item Price 

BLS-11........................... BLADE ONLY........................................ $ 89.95 


STAINLESS STEEL FILLET & DIVE BLADES 

FLEXIBLE FILLET BLADE 

INFORMATION FOR FINISHING A SHEATH 

Made of 440C stainless steel, 11-7/8” overall length, 7” long blade, satin 

finished and hollow ground, 1/16” thick. Three 5/32” diameter holes for 

your favorite pin stock. FITS SHEATH #1. 


BLSFS7C ...............BLADE W/DEEP..............................................18.95 

CRYOGENIC TEMPERING (-305 o F) 

TEXAS FILLET 

Cryogenicically treated high carbon stainless steel blade. 16” overall 

lenghth,1/16” thick with 10-1/2” cutting edge. Use (3) 1/8” pins. Satin finished 

and hollow ground. Sure to help out with those bigger than average 

fish. Uses an extra long SHEATH, #SHE-TEX. 


BL707C ..................BLADE W/DEEP ........................................... $18.45 


SHE-TEX................SHEATH FOR TEXAS FILLET........................ 17.95 

STINGRAY FILLET 

The length of this double edge fillet is 12-1/2" overall. The blade is a 

long 7" and 5/8" wide. The pinhole diameter is 5/32". 


BL050 ....................BLADE ONLY.................................................. $9.95 

BL050C.................. BLADE W/DEEP.............................................. 13.45 


MODEL A 

OCEAN EDGE DIVE SERIES 

9-1/4” overall length, 3/16” thick, 440C stainless steel with a satin finish. 

This blade is cryo treated and double tempered, and dive ready! 


BLMODAC..............BLADE CRYO-TREATED(-305 o F)................. $13.95 

& DOUBLE TEMPERED 

MODEL B 

9-3/4” overall length, 3/16” thick, 440C stainless steel with a satin finish. 

This blade is cryo treated and double tempered, and dive ready! 


BLMODBC..............BLADE CRYO-TREATED(-305 o F)................. $13.95 

& DOUBLE TEMPERED 

Our sheaths are constructed from vegetable oil tanned leather 

and are ready to be shaped to your knife. The following steps will 

help you form this sheath. The sheath is very thirsty, so do not wet 

until necessary. 

Items to assemble ahead of time: hairdryer, plastic wrap or 

floor wax if knife is carbon steel, leather dye, if desired, neatsfoot 

oil and wool swabs for applying the oil. 

Compare the sheath to your knife and be sure they can be fitted 

together. Handle end should extend from top of sheath (pouch type) 

about 1-1/4” on smaller knives and 1-1/2” to 2” on larger knives. 

Hands must be clean. Hold the sheath under a cold water 

faucet and allow water to flow over and inside the entire sheath. 

This takes about one minute. Pour out excess water. Push knife into 

the sheath as far as possible without cutting through the bottom of 

the sheath. Do not force knife tip through the end of sheath, and 

do not hold tip of sheath or force against any part of your body, 

because one could cut through the leather and cut oneself. Knife 

should now be very tight in the wet sheath. If the blade is carbon 

steel, then it should be protected with plastic wrap or floor wax 

(not buffed off) to prevent oxidation (rust) due to water exposure. 

Now that the knife is securely inside the sheath, begin to form 

the sheath to fit the knife by rubbing with your fingers around the 

blade portion, guard and/or finger groves. Form around any shape 

that can be used to hold knife inside the sheath. The idea is to 

mold the leather to fit very tightly around the knife so that it will not 

fall out of the sheath when it is being worn on the belt. 

It is helpful if another person can hold a hair dryer about 

one foot away from the sheath while it is being shaped. Mold the 

sheath until the natural color begins to return and some stiffening 

of the leather begins. Remove the knife from the sheath and store 

safely. Again mold the same area as before, and go over the areas 

disturbed when you removed the knife from the sheath. Be sure to 

keep the sewn edge straight and open the belt loop slightly. When 

sheath looks like it is formed as you wish, then hang it in an area 

so that it will not be disturbed until completely dry and hard. A few 

hours in the sun or even hanging from an air vent over night should 

allow it to dry completely. 

Sheath will now be stiff and ready to dye with leather dye, or 

simply to color and oil with neatsfoot oil. Apply four heavy coats 

of neatsfoot oil with a wool swab or cotton ball. These four coats 

may be applied at one time. Again, allow sheath to dry at least 6 

hours. If color is too light, just add more neatsfoot oil to darken. 

If waterproof seal is desired, then add a heavy coat of mink oil or 

snow seal. The knife should be carried, but not stored inside the 

sheath. 


STAINLESS STEEL BLADES & KNIFE KITS 

BOONE & CROCKETT SKINNER BLADE OR KIT 

LAREDO SKINNER BLADE OR KIT 

The BL408 example above is shown 

with Dymondwood handle material. 

Available as blade or kit 

with blade. 

The BLADE has a mirror finish made from high carbon 6A stainless. The 

300B, 400B, or 500B hidden bolts are a great choice for pin material, or 

use the 3/16” rod and 1/4” thong hole tubing. The overall length of the 

blade blank is 7-3/4”, the blade is 3-3/4” wide and 5/32” thick. The bolster 

holes are 3/32”. Use SHEATH #4. The KIT comes with the blade, pin and 

thong hole tubing, Dymondwood handle material in your choice of color, 

30 minute epoxy and instructions to assemble your knife. 


BL408......................BLADE ONLY................................................ $20.95 

BL408C................... BLADE W/DEEP CRYOGENIC....................... 24.45 


BL408K................... BLADE KIT...................................................... 25.95 

BL408KC................ BLADE KIT W/CRYO TEMP (-305 o F)............. 28.45 

TEXAS SKINNER BLADE OR KIT 

BLADE blank is 7-5/8” overall 

in length, with a blade that is 

3” long, 1-1/4” wide, and 5/32” 

thick. Very slight upswept 

point makes this blade especially 

good for skinning. Highly 

polished 6A high carbon stainless 

with better edgeholding. 

FITS SHEATH #3. 

The KIT consists of the blade, 

Dymondwood scales, 3/8” 

Available as blade or kit with blade. thick x 1-1/2 wide x 5” long 

(your choice of colors), (2) brass 1/4” dia. pins precut to fit, 30 minute 

epoxy, and instructions to assemble your knife. 


BL409..................... BLADE ONLY................................................ $20.95 

BL409C................... BLADE W/DEEP CRYOGENIC....................... 24.45 


BL409K....................BLADE KIT..................................................... 26.95 

BL409KC.................BLADE KIT W/CRYO TEMP (-305 o F)............. 29.45 

SAM HOUSTON SKINNER BLADE OR KIT 

Available as blade or 

kit with blade. 

The BLADE blank is 

8-1/4” in overall length, 

with a blade length 

that is 3-5/8”, width of 

1-1/16” and thickness of 

5/32” . There are three 

5/32” diameter holes 

for rods or pins. Blade 

is slightly dropped at 

point. Made of 6A high carbon stainless steel for better edge holding, this 

blade is hollow ground and highly polished.The KIT contains Dymondwood 

scales, (3/8” thick x 1-1/2” wide x 5” long) in your choice of color, (3) brass 

5/32” dia. pins precut to fit, 30 minute epoxy, and instructions to assemble 

your knife. FITS SHEATH #3. 


BL410..................... BLADE ONLY................................................ $20.95 

BL410C................... BLADE W/DEEP CRYO TEMP (-305 o F)......... 24.45 

BL410K................... BLADE KIT...................................................... 26.95 

BL410KC................ BLADE KIT W/CRYO TEMP (-305 o F)............. 29.45 

58 

The BLADE blank is 9” in overall length, with a blade that is 4-3/4” long, 

1” wide and 5/32” thick. Narrow trailing point design and good balance 

makes this one perfect for most camping and hunting needs. 6A high 

carbon stainless steel. Tangs are prepared with three 5/32” holes for pins, 

rivets, or bolts of the SB type. FITS SHEATH #2. 

The KIT consists of the blade, Dymondwood scales, 3/8” thick x 1-1/2 wide 

x 5” long (your choice of colors), (3) brass 5/32” dia. pins precut to fit, 30 

minute epoxy, and instructions to assemble your knife. 


BL411...................... BLADE ONLY............................................... $20.95 

BL411C.................... BLADE W/DEEP CRYOGENIC...................... 24.45 


BL411K.................... BLADE KIT..................................................... 26.95 

BL411KC................. BLADE KIT W/CRYO TEMP (-305 o F)............ 29.45 

BRAZOS SKINNER BLADE OR KIT 

Available as blade or kit with 

blade. 

The BLADE blank is 8-7/8” in 

overall length, 4-1/4” long blade, 

1-1/4” wide at ricasso and 5/32” 

thick. Beautiful hollow grind and 

very highly polished which not only 

looks good, but is easy to sharpen. 

The integral finger groove in the 

handle (typical in this group of 

blades) makes it unnecessary to 

add a special guard and saves time. Upswept blade made of super 6A 

high carbon stainless steel. FITS SHEATH #11. 

The KIT consists of the blade, Dymondwood scales, 3/8” thick x 1-1/2 wide 

x 5” long (your choice of color), (3) brass 5/32” dia. pins precut to fit, 30 

minute epoxy, and instructions to assemble your knife. 


BL412...................... BLADE ONLY............................................... $20.95 



BL412K.................... BLADE KIT..................................................... 26.95 

BL412KC................. BLADE KIT W/CRYO TEMP (-305 o F)............ 29.45 

PECOS BULLNOSE SKINNER 

The overall length of this skinner is 7-3/4”. It has a 3-1/2” satin finished, 

hollow ground 440C blade. FITS SHEATH #4. Handle material not included. 

Optional bolster. Use drill #31. BO422 may be used. 


BL422...................... BLADE ONLY............................................... $25.95 



BO422...................... N/S BOLSTER AND PINS................................ 9.95 


STAINLESS STEEL BLADES & KNIFE KITS 

COMPACT SKINNER BLADE OR KIT 

MAXI SKINNER 

Included in kit- epoxy 

and handle material 

Available as blade or blade with kit. 

The BLADE is 6-1/2” overall in length. It has a 2-3/4” long blade, is 1” 

wide and 1/8” thick. This 6A high carbon stainless steel blade comes with 

three 1/4” diameter holes for rivets, pins or bolts and a thong hole that is 

1/4” in dia. Also has two 1/8” diameter holes for pins in the middle. Flat 

ground and polished. A good pick for a small skinner. 

The KIT consists of the blade, (2) 1/4” brass pins cut to required length, 

Dymondwood handle material that is 3/8” thick x 1-1/2” wide x 5” long 

(your choice of color), 30 minute epoxy and instructions to assemble your 

knife. The thong hole tubing needs to be ordered separately if you desire 

a thong hole. Blade fits SHEATH #4 (not included in kit). 


BL431.............BLADE ONLY.........................................................$17.50 

BL431C...........BLADE W/CRYO TEMPERING (-305 o F)................ 21.00 

BL431K...........BLADE KIT............................................................. 23.95 

BL431KC........BLADE KIT W/CRYO TEMPERING (-305 o F)......... 27.95 

SHE4...............SHEATH................................................................. 15.95 

RADICAL SKINNER 

Made of high vanaduim stainless steel, 9-7/8” overall length, 5” long 

blade, 1-1/4” wide, almost 3/16” thick, with (3) 3/16” diameter holes for 

pins or bolts, and holes in front for an optional bolster. Satin finished and 

extremely sharp with a very nice false edge ground in the top. No sheath 

offered at this time. 


BL460..................... BLADE ONLY................................................$39.95 

BL460C................... BLADE W/DEEP........................................... 43.45 


WHITE TAIL 

9-1/8” overall length, 4” long blade, 1-1/4” wide, almost 3/16” thick, nice 

false edge too! Satin finished high vanaduim stainless steel with great 

edge holding ability, but no tapered tang. FITS SHEATH #2. 


BL464.................... BLADE ONLY ................................................$34.95 

BL464C.................. BLADE W/CRYO TEMPERING (-305 o F)........ 38.45 

MINI SKINNER 

7-7/16” overall length, 3-1/4” long blade, 3/16” thick, 1-11/16” at widest 

point, hollow ground and satin finished. 6A high carbon stainless steel 

with three (3)1/4” diameter holes for rods or bolts. Top of blade is single 

edge serrated and is very useful when cutting through tendons to separate 

joints during skinning operations on game. USE SHEATH #13. Needs a 

1-3/4” wide handle. 


BL444.................... BLADE ONLY................................................. $20.95 



SHE13.................... SHEATH........................................................... 15.95 

BIG THICKET HUNTER 

6” overall length, 2-5/8” long blade, 7/8” wide and almost 1/8” thick. Slight 

false edge, nice hollow ground high vanaduim stainless steel, 

5/32” holes for rods and 1/4” for thong. FITS SHEATH #4. 


BL465.....................BLADE ONLY................................................ $22.95 

BL465C...................BLADE W/CRYO TEMPERING (-305 o F)......... 26.45 

DROP POINT HUNTER 

9-1/2” overall length, 4-1/2” long blade, 5/32” thick and 1-1/8” maximum 

width blade. Now, better than ever with mirror polished, 6A high carbon 

super stainless steel blade. Handle is equipped with 6 pinholes that are 

1/8” diameter, two 1/4” holes for pins or bolts and same size for a thong 

hole. Truly an improved blade. FITS SHEATH #15 as well as guard 

GKKGB OR GKKGS. 


BL458.................... BLADE ONLY................................................. $20.95 



SHE15.................... SHEATH........................................................... 15.95 

GKKGB.................. BRASS......................................................... 8.95 ea. 

GKKGS.................. 303 STAINLESS STEEL.............................. 7.95 ea. 

Made of 6A high carbon stainless steel, 9-1/4” overall length, 4-3/8” long 

blade, 5/32” thick, with (6) 1/8” pin holes and (3) 1/4” pin holes. Mirror 

polished and hollow ground. FITS SHEATH # 7 and the guard GKKGB 

OR GKKGS below. 


BL466.....................BLADE ONLY............................................... $ 20.95 

BL466C...................BLADE W/CRYO TEMPERING (-305 o F)......... 24.45 

GUARDS 

Guards for BL458 and BL466 are made from 

brass or 303 stainless steel. They are already 

slotted and drilled with a 1/8” diameter hole 

with pin included. 


GKKGB.................. BRASS....................................................... $8.95 ea. 

GKKGS.................. 303 STAINLESS STEEL.............................. 7.95 ea. 


STAINLESS STEEL BLADES 

WOODY’S FAVORITE 

NEW GUIDES SKINNER 

7’ overall length, cutting edge length is 2-5/8”, 5/32” thick and 1” wide blade 

with thumb grooves. Really nicely done hollow grind, mirror polished, with 

a very clean handle. A good all around drop point skinner blade. Drilled 

with 6 holes for pins of 3/32” diameter and a 3/16” thong. Handles need 

to be 4” long and 1-1/8” wide to cover. FITS SHEATH #4. 


BL475.................... BLADE ONLY................................................. $19.95 



60 

DEL RIO SKINNER 

10” overall length, 5” long blade, 1-1/8” wide and 3/16” thick. Nicely flat 

ground and has a good-looking false edge. The handle has a hand fitting 

open finger groove pattern that is easy to work out and also fits the hand 

very well. The handle pinholes are an over size 3/32” and the thong hole 

is 1/4”. Blade material is the famous 6A high carbon stainless steel. FITS 

SHEATH #2 or #23. 


BL478.................... BLADE ONLY.................................................$19.95 

BL478C.................. BLADE W/DEEP..............................................23.45 


OTTO’S GRAND SKINNER 

8-7/8” overall length, 4-1/4” long blade, 5/32” thick and a full 1” wide. Hollow 

grind high quality 6A high carbon stainless steel and mirror polished, 

with 6 holes for pins of 3/32” diameter and a 1/4” thong hole. Use Guard 

#480. FITS SHEATH #2. 


BL480.................... BLADE ONLY.................................................$19.95 



GB480.....................BRASS GUARD WITH PIN...............................8.95 

GS480.....................303SS GUARD WITH PIN.................................7.95 

BOYS SKINNER 

6-1/2” overall length, 2-1/2” cutting length of blade, 3/4” wide, 3/32” thick 

blade, 440 stainless steel, hollow grind and satin finished. An excellent 

boys knife. 1/8” diameter holes for bolsters and handle pins. FITS SHEATH 

#4. Use bolster #481. 


BL481C.................. BLADE W/DEEP CRYOGENIC..................... $17.45 


BO481.................... BOLSTER #481- Nickel/Silver with pin.............. 6.25 

Sold per set of 6 pieces. 

9-1/2” overall length. The 4-1/4” hollow ground blade is 1-3/16” wide, and 

a full 1/8” thick. Made of 440C stainless steel and satin finished. Uses 

(6) 3/32” pins or (2) 1/4” rods or bolts. It has a 1/4” thong hole. USES 

SHEATH #2. The BO483 bolster set comes with (6) 3/32” N/S pins and 

(1) 1/4” N/S thong hole tube. 


BL483.................... BLADE ONLY................................................. $21.95 



BO483.................... N/S BOLSTER AND PINS...............................12.95 

CANADIAN SKINNER 

10” overall length, 5-1/4” long blade, 5/32” thick and hollow ground with 

a beautiful satin finish. Super 6A high carbon stainless steel new style 

skinner blade. Two holes of 5/32” diameter for SB or BBS bolts or rods 

and 1/4” hole for a thong. This one can easily be dressed up with almost 

any handle material. FITS SHEATH #18. 


BL530.................... BLADE ONLY................................................. $19.95 



SHE18.................... SHEATH...........................................................15.95 

RING TAIL SPECIAL BLADE OR KIT 

7-5/8” overall length, 

3-3/4” long blade, 7/8” 

wide and a little over 

1/8” thick with a fine 

tuned hollow ground 

blade. Super 6A high 

carbon stainless steel 

and a satin finished 

drop point. Six 3/32” 

diameter holes for 

rods and larger hole 

is for a 1/4” diameter 

thong. Uses Guard 

#532/533. The KIT contains blade, guard, pins, Dymondwood scales, 

epoxy and instructions. FITS SHEATH # 3. 


BL532.................... BLADE ONLY................................................ $20.95 

BL532C.................. BLADE W/DEEP............................................. 24.45 


BL532K...................BLADE KIT......................................................26.95 

BL532KC................BLADE KIT W/CRYO.......................................30.45 

GN532/533..............GUARD – Nickel/Silver with pin.......................9.95 

SHE3.......................SHEATH..........................................................15.95 



BABY CAPE SKINNER 

HUNTERS DELIGHT 

Cryogenically treated 440C stainless steel 4-1/2” overall length, 2” long 

blade which is satin finished and hollow ground, 1” width, 1/8” thick, and 

takes (3) 5/32” diameter pins. Don’t let the name or size fool you. It is one 

of our smallest knives ever, but it is perfectly capable of getting the job 

done. No sheath offered at this time. 


BL712C...........................BLADE W/DEEP.....................................$12.95 


MAVERICK 

7-5/8” overall length, 3-1/2” long blade, 7/8” wide and a little over 1/8” thick. 

Hollow grind clip point with a nice false edge. Other features are the same 

as BL532. Uses Guard #532/533. FITS SHEATH # 3. 


BL533......................... BLADE ONLY............................................ $20.95 

BL533C....................... BLADE W/DEEP......................................... 24.45 


GN532/533.................. Guard-Nickel Silver with pin.......................... 9.95 

JUDGES FAVORITE BLADE OR KIT 

Sample of Blade 543 finished with bolster and Cocobolo handle 

9-3/4” overall length, 4-1/2” long blade, 1-3/8” wide, 3/16” thick extra fine 

drop point blade. Mirror polished, hollow ground extra-fine 8A stainless 

steel with finger grooves and tapered tang. Has terrific edge holding. Use 

any of our bolts or 3/16” diameter rods for pins. Thong hole is 1/4” diameter. 

USE SHEATH #11. Use bolster #543. 


BL543.................... BLADE ONLY ................................................ $29.95 



BO543N................. BOLSTER #543 – pre-drilled with pins.............. 9.95 

Nickel/silver. Sold per set. 

BEAVER SPECIAL 

7-1/2” overall length, 3-1/4” long blade, 1-1/8” maximum width, nice looking 

blade. Great vanadium stainless steel hollow ground and satin finished to 

perfection. All holes are 1/8” diameter. FITS SHEATH #3. 


BL535.....................BLADE ONLY................................................ $37.95 

BL535C...................BLADE W/DEEP..............................................41.45 


SABINE HUNTER 

Epoxy and 

handle material 

included in kit. 

Pre-machined 

cocobolo scales 

available as an 

upgrade 

The BLADE is 8-3/4” overall length, 4” long blade, 1-1/8” wide, 5/32” 

thick, satin finished and hollow ground 6A high carbon stainless steel. 

Thumb grooves on top for extra grip and a nice tapered tang. Truly a fine 

blade. All of our bolts fit or use 3/16” diameter rods. Thong hole is 1/4”. 

Use guard #545. 

The KIT consists of the blade, the #545 guard, (2) 3/16” diameter nickel/ 

silver pins, cut to fit, Dymondwood handle material (3/8” thick x 1-1/2” 

wide x 5” long) in your choice of color, 30 minute epoxy and instructions 

to assemble your knife. Thong hole tubing needs to be ordered separately 

if you desire a thong hole. 

Blade fits SHEATH #2.(Not included in kit.) 


BL545...............BLADE ONLY....................................................... $19.95 

BL545C.............BLADE W/CRYO TEMPERING (-305 o F)............... 23.45 

BL545K.............BLADE KIT............................................................. 31.95 

BL545KC..........BLADE KIT W/CRYO TEMPERING (-305 o F)......... 35.45 

G545.................GUARD #545........................................................... 9.95 

BL545COCO....SET OF COCOBOLO SCALES............................. 19.95 

PRE-MACHINED (UPGRADE) 

8-5/8” overall length, 4-3/8” long blade, 1/8” thick, and 1” wide satin finished 

vanadium stainless steel blade. Bolster holes are 1/8” diameter and tang 

holes are 5/32” diameter. Fine looking false edge and great hollow grind 

give it a good balance. FITS SHEATH #2. 


BL539.................... BLADE ONLY................................................. $39.95 



TEXAS UTILITY 

8-3/4” overall length, 4-1/2” long blade, 7/8” wide, and 1/8” thick. Available 

in vanadium stainless steel that is hollow ground with a satin finish. Bolster 

holes are 1/8” diameter and tang holes are 5/32” diameter. This is a neat 

utility that can double as a steak knife. 


BL540.....................BLADE ONLY................................................$39.95 

BL540C...................BLADE W/DEEP..............................................43.45 




GENTLEMAN’S SKINNER 

VENTED SKINNER 

Cryogenically treated 440C stainless blade. 3-3/4” long blade, 7-3/8” 

overall length, 1/8” thick with 1/8” pin holes. Blade is satin finished and 

hollow ground. Unique hole in blade makes it light and easy to use. Uses 

SHEATH #4 


BL704C.................. BLADE W/ DEEP CRYOGENIC...................$ 14.95 


BLACK HOLE SKINNER 

Example of BL706 without bolster and with Spaulted Pecan handle material 

6-1/2” overall length and 1/8” thick with 2-1/2” flat ground, satin finished 

440C blade. Uses (6) 3/32” pins or (2) 1/4” rods or bolts. It has a 3/16” 

thong hole. The (6) N/S pins and 3/16” N/S thong hole tubing come with 

the BO706 bolster set. FITS SHEATH #4 AND #16. Use drill size #31. 


BL706.................... BLADE ONLY................................................. $21.95 

BL706C.................. BLADE W/ DEEP CRYOGENIC...................... 23.45 


BO706.................... N/S BOLSTER AND PINS.................................. 9.95 

COWBOY’S SKINNER 

Cryogenically treated 440C stainless steel. 6-1/8” overall length, 2-1/2” long 

blade with top serrations, 1/8” thick. Use 1/8” pins. Satin finished and hollow 

ground. Hole ground in handle for easier gripping. Uses SHEATH #4 


BL705C.................. BLADE W/ DEEP CRYOGENIC.....................$14.95 


WILDCAT SKINNER 

Example of BL724 with Bolster and handle material 

A larger version of the Gentleman’s Skinner, this blade is 7-3/4” overall in 

length and 1/8” thick with a 3” flat ground blade. The blade is satin finished 

440C. Uses (6) 3/32” pins or (2) 1/4” rods or bolts. It has a 

5/16” thong hole. The BO724 bolster set consists of (6)3/32” N/S pins 

and (1) 5/16” N/S thong hole tubing. FITS SHEATH #3 (deeper fit) or 

SHEATH #4. Use drill size #31. 


BL724.................... BLADE ONLY................................................. $24.95 

BL724C.................. BLADE W/ DEEP CRYOGENIC...................... 28.45 


BO724.................... N/S BOLSTER AND PINS.................................. 9.95 

PUSH SKINNER 

This Wildcat Skinner has a satin finished, hollow ground blade with a thumb 

rest and a false edge. It is made from high carbon 6A stainless and is 

cryogenically treated for excellent cutting and edge holding attributes. The 

pin holes are 1/8” and the thong hole is 3/16”. Overall the blade is 7-1/2” 

with a 3” upswept blade and it is .135” thick. Use SHEATH #4. 


BL709C.................. BLADE W/ DEEP CRYOGENIC....................$14.95 


COYOTE SKINNER 

Cryogenically treated 6A high carbon stainless steel. 6-3/4” overall length, 

2-3/4” blade, 1/8” thick with 3/16” pin holes and 3/16” thong hole. The blade 

is satin finished and hollow ground. Hump back handle design for smooth 

skinning action. Use SHEATH #21. 


BL710C.................. BLADE W/ DEEP CRYOGENIC.................... $14.95 


COWBOY’S BEARKAT SKINNER 

Cryogenically treated 440C stainless steel, 5-1/2” overall length, 2-7/8” 

long blade, 3/32” thick. Use (2) 1/8” pins. Satin finished with top edge 

that may vary with either small serrations or a false edge . No sheath 

available at this time. 




62 

Cryogenically treated 6A high carbon stainless steel, 7-1/2” overall, 

3-1/8” blade, 3/32” thick with 1/8” pin holes, satin finish blade with a hollow 

grind. Finger grooves for easier holding. Fits SHEATH #4 






SG4 TM HUNTING SERIES 

The SG4 TM fixed blade Series was developed by Darrel Ralph to be 

the highest quality kit knife ever attempted for the fixed blade market. 

This blade has the most blade grind available in a kit for cutting meat 

and hide, and it is tough. Notice the deep hollow grind which helps the 

SG4 TM excel when slicing. 

General Kit Specifications 

Blade Steel: AUS-8 stainless steel (Heat Treated to 57-59 rc.) • Blade Finish: 600 

Grit Satin Finish • Blade Length: 4.4 inches • Handle Length: 4.49 inches • Overall 

Length: 8.86 inches • Pins: Stainless 

The SG4 TM Modern Bowie tip is great for all types of skinning, camp 

chores, digging and most outdoor uses. Use Sheath #3. 

LIT’L BADGER 

The SG4 TM Drop Point will please the outdoor huntsman. The tip on the 

grind is one of the most used in the world. Use Sheath #3 

The SG4 TM Standard model is an excellent skinning tip right out of the 

box.You can modify the final grind and tip to your specifications. Use 

Sheath #3. 

A small blade that can accomplish a lot of little tasks in the kitchen or in 

the field. Overall length is 7”, blade length of 2-5/8” and width of 7/8”. The 

bolster holes are 3/32”, with (2) 3/16” holes in the handle for pins or bolts, 

and a thong hole that is 1/4”. The satin finished blade has been cryogenically 

treated for edge holding ability. 


BL728C...................BLADE W/ CRYOGENIC............................... $14.95 


TOMCAT SKINNER 

The SG4 TM Trailing Point is one of the world’s finest blade configurations 

for piercing through animal hide. This tip design will make short work of 

skinning large and small animals. Use Sheath #3. 


BLSG4S 

BLSG4SK 

BLSG4B 

BLSG4BK 

BLSG4T 

BLSG4TK 

BLSG4D 

BLSG4DK 

SHE3 

(1) SG4 TM Standard Base Kit includes blade/bolster 

w/pins and thong hole tubing.(no handle material) 

(1) SG4 TM Standard Complete Kit includes blade/ 

bolster w/pins, thong hole tubing, 1 set of rough 

pre-drilled Cocobolo scales and Epoxy. 

(1) SG4 TM Bowie Base Kit includes blade/bolster w/ 

pins and thong hole tubing.(no handle material) 

(1) SG4 TM Bowie Complete Kit includes blade/ 



(1) SG4 TM Trailing Point Base Kit includes blade/ 

bolster w/pins and thong hole tubing.(no handle 

material) 

(1) SG4 TM Trailing Point Complete Kit includes 

blade/bolster w/pins, thong hole tubing, 1 set of 

rough pre-drilled Cocobolo scales and Epoxy. 

(1) SG4 TM Drop Point Base Kit includes blade/ 

bolster w/pins and thong hole tubing.(no handle 

material) 

(1) SG4 TM Drop Point Complete Kit includes blade/ 



This sheath fits blade BLSG4S, BLSG4B, BLSG4T, 

and BLSG4D. 

$34.95/ea. 

47.95/ea. 

37.95/ea. 

49.95/ea. 

37.95/ea. 

49.95/ea. 

37.95/ea. 

49.95/ea. 

15.95/ea. 

PORK BELLY SKINNER 

Stainless steel blade with integrated bolster. Uses 3/16” diameter pinstock 

and 1/4” thong hole tubing. The blade is 3-1/4” long with a 7-1/2” overall 

length. Cryogenically treated to increase its edge holding properties. 


BL713C...................BLADE W/DEEP............................................. $23.95 


MODERN SKINNER KIT with BOLSTERS 

Example of BLSK1 with giraffe bone handle material. 

Modern skinner kit with bolsters, pins and bolts included. The overall length 

is 8-1/4”, the blade is 3-1/2” and the thickness is 0.155”. The blade is made 

of AUS8 stainless steel and is satin finished. There are (14) 1/8” and (4) 

.281 x .250 416SS handle bolts. 


BLDRSK1...............BLADE W/DEEP.............................................$37.95 


BIG JOHN’S SKINNER/FIGHTER 

A serious hollow ground skinner.made from 440C and cryogenically treated 

for extra edge holding. This skinner is satin finished with 3/16” pin holes 

and 3/32” bolster/guard holes. The dimensions are 8-1/2” overall with a 

4-1/2” long x 1-1/8” wide blade. 


BL727C...................BLADE W/ CRYOGENIC...............................$14.95 


The overall length of the blade is 10-1/4” with a blade that is 4-1/2” in length. 

Partial false edge and thumb grooves. Use 3/16” pins and 3/16” thong hole 

tubing. Cryogenically treated to increase its edge holding properties. 


BL732C...................BLADE W/DEEP.............................................$19.95 




CC4 TM Cowboy Classic 

BIG BEND SKINNER 

Blade only 

Blade kit with 


and fasteners. 

This kit offers an optional pre-fit, sewn/ 

riveted, leather sheath with wrap over 

button fastening. 

The CC4 TM Cowboy Classic DP is an 8.5” through-tang, double bolster 

design hunter/skinner. It has a high carbon, 420HC stainless steel 4” 

blade, which is hollow ground, drop point, and has been heat treated to 

56-58 rc. The stacked leather spacer handle is comfortable, and offers 

optimal performance when wet, making it a knife of choice for hunters and 

fishermen. The butt/guard is aluminum. The red/white/black vulcanized 

spacers give the knife character. 


BLCC4CK.....Parts Kit: Cryo-treated ............................................$52.95 

Comes with ground and sharpened blade. 

Includes fasteners, handle spacers, 

leather handle washers, butt, guard and 

assembly hardware. 

SHECC4.......CC4 Leather Sheath....................................................5.95 

PROWLER SKINNER 

This elegant, matte finished, drop point BLADE with thumb push is a 

sight to behold. Perfect big game blade. It is made of 440 grade stainless, 

cryogenically treated for edge holding, hardness is 56-58 RC.The overall 

length is 9-1/2”, the blade is 5”, 1/8” thick, and 1-1/2” wide. Pin holes are 

3/16”. Select your own handle material or buy the kit. KIT includes blade, 

preshaped and drilled quince burl handles and black oxide designer fasteners. 

You need a T8 torx wrench to install the handles (torx wrench not 

included in kit). Use SHEATH #11 or #20. 


BLCDP....................BLADE ONLY W/CRYO TEMP(-305 o F)......... $14.95 

BLCDPK.................BLADE KIT W/CRYO TEMP(-305 o F)............... 16.95 

BIG BEND GUTHOOK 

Blade only 

Blade kit with 


and fasteners. 

Stainless steel blade. Uses 1/8” diameter pinstock. The blade is 4-1/2” 

long with a 7” overall length. Cryogenically treated to increase its edge 

holding properties. 




THE AVENGER 

Here’s the sportsman’s perfect big game guthook! The BLADE is made 

of 440 grade stainless steel, and is cryogenically treated for extra edge 

holding. Hardness is 56-58 RC. The overall length is 9-1/2”, the blade is 

5” long, 1-1/2” wide, and 1/8” thick. Pin holes are 3/16”. Select your own 

handle material or buy the kit. KIT includes blade, preshaped and drilled 

indestructible G-10, 2 color, blue and black preshaped handles, and black 

oxide designer fasteners. You need a T8 torx wrench to install the handles 

(torx wrench not included in kit). Use SHEATH #11 


BLCGH...................BLADE ONLY W/CRYO TEMP(-305 o F)......... $14.95 

BLCGHK.................BLADE KIT W/CRYO TEMP(-305 o F)............... 16.95 

BIG BEND HATCHET 

This drop point tactical, stainless steel blade is AUS8 and has an overall 

length of 9-1/2”, a blade length of 4-1/2” with 3/16” diameter holes for 

pins. Fine satin finish and hollow ground to a fine edge. Cryogenically 

treated. 


BL731C...................BLADE W/DEEP............................................ $21.95 


64 

Downloadable catalog available at 


Hatchet kit with handle 

material and fasteners. 

This sturdy, stainless HATCHET is matte finished. The overall length is 

9-5/8”, the blade face is 2-3/4”, 3/16” thick. Pin holes are 3/16”. Select your 

own handle material or buy the kit. KIT includes hatchet blade, preshaped 

and drilled quince burl handles and black oxide designer fasteners. Takes a 

T8 torx wrench to install the handles (torx wrench not included in kit). Made 

from 440 grade stainless, cryogenically treated, hardness is 56-58 RC. 


BLCH01..................HATCHET ONLY W/CRYO TEMP(-305 o F).... $17.95 

BLCH01K...............HATCHET KIT W/CRYO TEMP(-305 o F).......... 21.95 

SHE25.....................SHEATH FOR BLCH01................................... 19.95 



THE INTRUDER 

Tactical 5-1/2” satin finished blade 

with overall length of 11” and a 

thickness of 0.177”. Comes with 

stainless steel guard and endcap 

with Phillips head tang nut. A handsome 

black leather sheath and a 

sharpening stone are included. The 

sheath has a special pocket for the 

sharpening stone so you always 

have it handy. 


BL210.....................BLADE KIT.................................................... $39.95 

BL210C...................BLADE KIT WITH CRYO................................. 43.45 

BISON BOWIE WITH SHEATH & GUARD 

KYDEX SHEATH MATERIAL 

Kydex is a tough sheath making material. It is waterproof and does not stain, shrink, 

rot or lose it’s color or shape. It is heat formed and available in black. It comes in 

.060” or .090” thicknesses. The instructions for forming the Kydex will be enclosed 

with your order. We stock this material as a one (1) square foot sheet (12” x 12”) or 

two (2) square foot sheet (12” x 24”). Larger sections are also available. Please let 

us know which size you would prefer. 

CAT. NO. ITEM PRICE/SQ.FT 

KYDEX1.......................060” Thick...................................................$6.50 

KYDEX2.......................090” Thick.....................................................8.50 

KYDEX EYELETS 

Available in nickel plated, black painted, or brass. The 1/8” eyelet (used for .60” 

Kydex) has a height of 0.197”, ID is 0.125”, OD is 0.144”. The 1/4” eyelet (used for 

.60” or .90” Kydex) has a height of 0.256”, ID is 0.241”, OD is 0.261”. 

CAT. NO. ITEM PRICE/PKG. 

KYDEYE1.......... EYELET BLACK- SMALL 1/8” dia. hole (50/pkg.).................$2.25 

KYDEYE2.......... EYELET BLACK- LARGE 1/4” dia. hole (20/pkg.)..................1.75 

KYDEYE3.......... EYELET SILVER- SMALL 1/8” dia. hole (50/pkg.)..................2.25 

KYDEYE4.......... EYELET SILVER- LARGE 1/4” dia. hole (20/pkg.)..................1.75 

KYDEYE5.......... EYELET BRASS- SMALL 1/8” dia. hole (50/pkg.)...................2.25 

KYDEYE6.......... EYELET BRASS- LARGE 1/4” dia. hole (20/pkg.)..................1.75 

SNAPSETTERS 

snapset1 

snapset2 

This bowie, sheath and guard come as a set. The blade has an overall 

length of 14-3/4”. The blade is 9-1/2” long and is satin finished and hollow 

ground. It is 0.20” thick. The hidden tang is 5” and has an optional pinhole 

which will take a 3/16” pin. The guard is satin finished brass and is 3” long 

x 3/4” wide x 0.183” thick. The economical fabric sheath is black nylon. 


BL211.....................BLADE, SHEATH & GUARD KIT....................$39.95 

DELTA FORCE FIGHTER 

This setter consists of 1 setter pouch and 1 anvil designed 

to set the snaps sold with our leather sheaths and 

kydex eyelets.The anvil has a concave side and a flat side. 

SNAPSET1 is for the 1/8” kydex eyelets & leather sheath 

snap sets. SNAPSET2 is for the 1/4” kydex eyelets. 


SNAPSET1................... Snapsetter.................................................$6.95 

SNAPSET2................... Snapsetter...................................................7.95 

KYDEX-CONCEALEX SHEATH 

MOLDING PRESS 

Example of BL725C with cord wrapped handle. 

A sleek looking fighter made of 3/16” 440C stainless 

steel that has been cryogenically tempered. 

The overall length is 9-1/2” and the cutting edge is 

4-7/8” with a 1-1/8” wide blade. There is an upper 

3-1/2” false edge and a cross guard. The pin holes 

are 1/4” and the thong hole is 1/4”. The blade looks 

nice with the green or black canvas Micarta scales. 

See Kydex for sheath material. 





This 12” x 8” or 24” x 8” kydex-concealex sheath maker is built from rugged 

1/4” steel plate. The professional forming system is perfect for making 

either flat-faced (one-sided), or a full fold-over (wrapped style) sheaths. 

The top plate is removable for height adjustment. Footer holes are predrilled 

so that the press can be mounted to a bench. 


KKSMP-12..............Sheath Molding (12” x 8”)..............................$99.95 

KKSMP-24..............Sheath Molding (24” x 8”)..............................159.95 



BOOT BLADE 

PROFESSIONAL GUTHOOK WITH BOLSTER 

7-1/2” overall length, 3-1/2” long blade, mirror polished, 6A high carbon, 

stainless steel blade. There are 6 pinholes that are 1/8” diameter and (2) 

1/4” holes for pins or bolts. This is a very nice looking boot knife blade. 


BL459 .................... BLADE ONLY ............................................... $19.95 

BL459C................... BLADE W/DEEP............................................. 21.50 


HEART DAGGER 

Cryogenically treated 440C stainless steel blade. 6-1/4” overall length, 

1/8” thick with 3-3/4” blade. Use 3/32” pins. Satin finished with a dainty 

heart cut out which makes it appealing to women. No sheath available 

at this time. 




THUNDERCAT DAGGER 

8-1/4” overall length, 3-3/4” long blade, 1” wide and 1/8” thick. Beautiful 

hollow ground blade and very highly polished and has a seration at the end 

of the cuttiing edge. The integral BOLSTER is very nice looking and saves 

you the work of putting the bolster on. It has 1/8” pin holes and a 3/16” 

thong hole. Blade made of 440C stainless steel. FITS SHEATH # 21. 


BL144.................... BLADE ONLY................................................. $27.95 



MEDIUM GUTHOOK SKINNER 

This double eye dagger is a unique tactical or art dagger. It has double 

thumb push ridges for tactical use and 3/16” pin holes. It is cryogenically 

treated 440C stainless steel, with a 10” overall length, 1/8” thickness with 

a 4-1/2” blade that has a fine matte finish. Use 3/32” pins. 




GOLIATH’S DAGGER 

The overall length is 7-3/4”. The 440 stainless, hollow ground, satin 

finished blade has a 3” cutting length and is 1-3/16” wide and .140 thick. 

Hardness 57-59 rc. There a 3 holes for 5/32” pins. Fits SHEATH #3. Use 

bolster #484. 


BL484C.................. BLADE W/DEEP............................................$26.95 


BO484.....................Nickel/Silver with pin..........................................5.95 

Sold per set of 3 pieces 

STAINLESS GUTHOOK 

13-1/2” overall length, 1-1/8” wide, 8-3/4” long blade and almost 3/16” 

thick. The blade is both hollow ground and mirror polished. Fine 6A high 

carbon stainless steel. Threads are 1/4-20. 


BL456...............BLADE ONLY....................................................... $25.95 

BL456C.............BLADE W/DEEP CRYO TEMP (-305 o F)............... 29.45 

REBEL TANTO 

9” in overall length, 3-3/4” long blade, 3/16” thick highly polished, 6A high 

carbon stainless steel. A beautiful hollow ground blade with a handle that 

will fit almost every hand. The pinholes are 1/8” diameter and the thong 

hole is 1/4” in diameter. FITS SHEATH #11. 


BL450.................... BLADE ONLY................................................. $25.95 



SLIM LINED GUTHOOK 

11” overall length, 6-1/2” blade, 1-1/8” wide, just under 3/16” thick, 

tapered tang, great hollow grind and nice satin finished super 6A high 

carbon stainless steel. Two 3/16” diameter holes for SB bolts or rods. 

Use Bolster #534. 


BL534...............BLADE ONLY....................................................... $27.95 

BL534C.............BLADE W/DEEP CRYO TEMP (-305 o F)............... 31.45 

BO534N............BOLSTER #534 – pre-drilled with pin................ 6.50/set 

Cryogenically treated, 440C blade, 7-3/8” overall length and 1/8” thick with 

3-1/2” blade. Use 1/8” pins. 


BL703C.................. BLADE W/ CRYO............................................$14.95 


66 



LITTLE CLIP POINT 

5” TRADITIONAL CLIP POINT SKINNER 

7-3/4” overall length, 4” long blade, 13/16” at widest point, nice false edge 

on clip point, hollow ground with satin finish. FITS SHEATH #4. 


BL454 ................... BLADE ONLY................................................ $24.95 

BL454C ................. BLADE W/DEEP CRYOGENIC...................... 28.45 


WATER DAWG 

10” overall length, full 1” wide. Satin finished and hollow ground for strength. 

Made of high vanadium stainless steal. FITS SHEATH #8. 


BL498.....................BLADE ONLY................................................ $26.95 

BL498C...................BLADE W/DEEP CRYOGENIC....................... 30.45 


DELUXE SKINNER 

7-3/4” overall length, 4-1/8” long blade, 1/8” thick, satin finished, hollow 

ground blade. 


BL424C.................. BLADE W/DEEP CRYOGENIC..................... $24.95 


CAJUN SKINNER 

9-1/8” overall length, 4-1/2” long blade, 1-3/16” wide, 5/32” thick, mirror 

polished 6A high carbon stainless steel. Hollow ground to perfection. TANG 

NUT #2, FITS SHEATH #8. 


BL525..................... BLADE ONLY................................................ $19.95 

BL525C................... BLADE W/DEEP............................................. 23.45 


COLORADO SKINNER 

8-1/2” overall length, 4-1/4” blade, 15/16” maximum width, 5/32” thick and 

nice thumb grooves. Highly polished 6A high carbon stainless steel and 

hollow ground blade. GUARD should be GHKG. Takes 5/32” pin material. 

TANG NUT #2 AND FITS SHEATH #15. 


BL455.................... BLADE ONLY................................................. $18.95 



GUTHOOK 

10-5/8” overall length, 5/32” thick, 5-1/2” blade, 1-3/16” wide with thumb 

grooves. Hollow ground from the preferred 6A high carbon super stainless 

steel and mirror polished. TANG NUT #2, SHEATH #10, AND GUARD 

GHKG. 


BL528 ....................BLADE ONLY.................................................$19.95 

BL528C...................BLADE W/DEEP CRYOGENIC........................23.45 


TOP SKINNER 

A hidden tang guthook, 8-3/4” overall length, 4-1/4” long blade, 5/32” 

thick, and maximum width 1-1/4” at hook. Made of the finest stainless 

steel. Hollow ground and mirror polished to perfection. TANG NUT #2, 

SHEATH #7 FITS. 


BL527............BLADE ONLY......................................................... $20.95 

BL527C..........BLADE W/ CRYOGENIC TEMPERING (-305 o F)..... 24.45 

6” TRADITIONAL CLIP POINT SKINNER 

9-1/8” overall length, 5/32” thick, 4-1/2” blade, 1-3/16” wide, 5/32” thick, 

mirror polished 6A high carbon stainless steel. Hollow ground to perfection. 

TANG NUT #2 AND FITS SHEATH #8. 


BL452.....................BLADE ONLY.................................................$19.95 



LITTLE CIMMARON 

11-3/4” overall length, 6-1/4” long blade, 1-1/8” wide. Satin finished high 

vanadium stainless steel nicely hollow ground. A fine looking blade. FITS 

SHEATH #9. 


BL490.....................BLADE ONLY................................................ $28.95 



7-5/8” overall length, 2-5/8” long blade, 5/32” thick and 7/8” wide mirror 

polished and hollow ground blade. Nicely designed, small skinner blade of 

fine 6A stainless steel. TANG NUT #2 AND FITS SHEATH #4. 


BL542.....................BLADE ONLY.................................................$17.95 


TEMPERING(-305 o F) 


BOWIE BLADES 

ALASKA BOWIE 

RIO GRANDE BOWIE 

This fine looking Bowie blade is 11-3/4” overall with an 8-1/2” blade edge. 

It is very heavy. The cryogenically treated stainless blade is made from 

1/4” 440C. We would suggest the lugged guard, GNLG or the crowned 

guard, GNCG. Also, the blade looks very nice with the Bowie/Dagger 

guard, G145 or G146 or you can use GBGL. No sheath available. 


BL750C................. BLADE W/DEEP CRYOGENIC..................... $59.95 

TEMPERING (-305F) 

GNLG2B................ BRASS LUGGED GUARD............................... 14.95 

GNCG2B............... BRASS CROWNED GUARD........................... 14.95 

13-3/4” overall length, 8-3/4” long blade, 1-1/2” wide, and 5/32” thick and 

beautifully hollow ground. Satin finished high vanadium stainless steel as 

above with a great looking 3-3/4” false edge. 


BL463.................... BLADE ONLY................................................ $45.95 



SHORT BOWIE 

GNLG2B 

GNCG2B 

TEXAS BOWIE 

GBGL (Available in brass or nickel-silver.) 

12” overall length, 7” long blade, 1-7/16” wide. Short and stout, and almost 

a quarter inch thick. Nice 3-1/2” false edge looks good and is well 

balanced. Satin finished high vanadium stainless steel and nicely hollow 

ground. Sometimes the blade comes in with blood grooves and sometimes 

without. If you prefer the grooves, please check on availability. 


BL499.................... BLADE ONLY................................................. $41.95 



MOUNTAIN MAN MAMMOTH BOWIE 

15-1/8” overall length, 10-1/8” long blade, 1-5/8” wide, highly polished 6A 

high carbon stainless steel. Blade is flat ground with a really nice false 

edge. Tang is full thickness and nicely fits the hand. Holes for rods or SB 

bolts are 5/32” diameter and thong hole is 1/4” diameter. FITS SHEATH 

#14. Use Guard GBGL. 


BL471.................... BLADE ONLY................................................. $39.95 


TEMPERING(-305F) 

GBGLBR................ GUARD (BRASS)............................................. 15.95 

68 

CLASIC BOWIE BLADE (SOLIGEN CARBON) 

11-3/4” overall length, 7-1/4” long blade, 3/16” thick, 1-1/4” wide, satin 

finished, 4” long false edge, tang threaded 10/24, a really beautiful blade. 

Makes up into a traditional looking Bowie with pleasing lines. 


BL137.................... BLADE ONLY................................................. $29.95 

GB720 

GN720 

JIM’S BOWIE 

GBGL (Available in brass or nickelsilver.) 

15-1/2” overall length, 10” long blade, 2-1/16” maximum width, 3/16” thick 

with a long clip point. Nicely satin finish, flat ground, Soligen high carbon 

stainless steel. Guard GBGL slides on for a good fit. Needs 5-1/4” long 

handles or use a 1/4” wide spacer behind the guard and then 5” handles 

will fit. Plenty of 5/32” diameter holes for pins or the SB bolts will fit.Use 

Guard GBGL or you can use any of our lugged and crowned guards such 

as GNCG OR GNLG. (Note: All of the guards need to be filed to the correct 

size.) FITS SHEATH #14. 


BL148.....................BLADE ONLY................................................ $84.95 



GBGLBR.................GUARD (BRASS).......................................... 15.95 

This bowie is a very popular style. It is made from 440C stainless. 13” 

overall length, 8” blade, 1-1/2” wide, 5/32” thick, 1/8” pinholes. 

Use guard GB720 or GN720. The guard is 4” long, 3/4” wide, and 1/4” 

thick. Guard comes in brass or nickel-silver. 


BL720.....................BLADE ONLY................................................ $39.95 



GB720.....................GUARD (BRASS).............................................. 9.95 

GN720.....................GUARD (NICKEL-SILVER).............................. 15.95 


ATS34 STAINLESS STEEL BLADES 

ATS34 STAINLESS STEEL 

DAMASCUS BLADES 

The photos do not do these blades justice. The detail is fine and 

consistent. They are professionally hand ground and are available in 4 

blade patterns. Each blade is available in ATS34 Stainless Damascus. 

Blade tangs are made from 440C. The blades have been cryogenically 

treated and double tempered. 

BIRD & TROUT 

CARBON DAMASCUS BLADES 

Professionally hand ground out of 1075 and nickel, right here in 

the USA. 

UPSWEEP SKINNER 

Incredible, upsweep skinner. 3” blade, 5/32” thick, 7-5/8” long, twist pattern 

only, takes 5/32” pin material. FITS SHEATH #4. 


BLTF9.....................CARBON DAMASCUS BLADE .................... $84.95 

CITATION 

8-1/4” overall length, 11/16” wide, 1/8” thick, and a really nice 4” long blade. 

Nicely tapered tang with 1/8” holes for pins. FITS SHEATH #3. 

TWIST, LADDER, OR RAINDROP 


BL551SD................ATS34 STAINLESS DAMASCUS................ $185.00 

WESTERN HUNTER 

Awesome, bullnose skinner. 3-1/8” blade, 5/32” thick, 7-3/4” long, twist 

pattern only, takes 5/32” pin material. FITS SHEATH #3. 


BLTF10...................CARBON DAMASCUS BLADE .................... $84.95 

LIBERATOR 

8-3/4” overall length, 1” wide, 1/8” thick, nice 4” long hollow ground drop 

point blade. Tapered tang with 1/8” holes. FITS SHEATH #3. 




SHORT AND SWEET 

Excellent drop point hunter. 3-1/2” blade, 5/32” thick, 7-3/4” long, twist 

pattern only, takes 5/32” pin material. FITS SHEATH #11 OR #21. 


BLTF11...................CARBON DAMASCUS BLADE .................... $94.95 

CLASSIC DAGGER 

7-7/8” overall length, 1” wide, 1/8” thick, nice 3-1/4” long hollow ground 

blade. Truly superb. Tapered tang with 1/8” holes. FITS SHEATH #3. 




BASIC DAMASCUS 

with Ed Caffrey, A.B.S. Mastersmith 

Watch as ABS Mastersmith Ed Caffrey shows you how to 

get solid results with your Damascus billets. He will show 

you processes that will allow you to make one good blade 

after another. Includes stock removal methods and tips 

on etching. Ed shows you refined techniques for creating 

bird’s eye pattern, a ladder pattern, a twist pattern, and a 

random pattern. Color, 83 min. 


DVD9...................... DVD...........................$35.00 

This is a beautiful, classic dagger. 5-1/2” blade, 1” wide, 9-1/2” overall, 

twist pattern only. 


BLSD11..................CARBON DAMASCUS BLADE .................. $102.95 

Knifemaking Tutorials 

at www.texasknife.com 

For those that are new to knifemaking, or if you 

want to learn something new go to our website. 

Look under Information/Projects and follow 

the directions to learn more about knifemaking 

from the professionals. 




USA DAMASCUS BLADES 

These blades are made right here in the USA. They are beautifully hand forged out of 1075 and 15n20 hi-carbon 

steel. All blades are heat treated, etched and polished. Customize these works of art with only the application of 

handle material and some file work if desired. Tangs are welded on mild steel, great for file work. Blades are made 

one at a time so no two are alike. 

THE BOSS 

HUDSON BAY 

7-1/2” overall, 1” width, thickness 3/16”, pin size 5/32”. Ladder pattern 

shown. FITS SHEATH #4. 


BLF25T...................TWIST PATTERN........................................... $79.95 

BLF25L...................LADDER PATTERN....................................... 103.95 

BIG CHIEF 

6-1/2” overall, 7/8” width, thickness 5/32” approx., pin size 5/32”. 

FITS SHEATH #6 OR #16. 


BLF41.....................TWIST PATTERN........................................... $49.95 

THUNDERBOLT DAGGER 



BLSD5....................TWIST PATTERN........................................... $74.95 

7-1/4” overall, 1” width, thickness 5/32”, pin size 1/8”. FITS SHEATH #4. 



THE CHAMP 

RASCAL 

4-3/4” overall, 5/8” width, thickness 1/8”. 


BLS49.....................TWIST PATTERN........................................... $31.95 

ROGUE 

7-1/8” overall, 7/8” width, thickness 5/32”, pin size 1/8”. FITS SHEATH #16. 


BLF21.....................TWIST PATTERN.......................................... $57.95 

GUARDIAN 

4” overall, 1/2” width, thickness 1/8”. 



SWEET REWARD 


FITS SHEATH #16 



3-3/4” overall, 1/2” width, 1/8” thickness. 



70 



PATHFINDER 

OLD TIMER 

2-1/2” blade, 6-1/8” overall, 1-1/8” wide, 5/32” thick. Use 1/8” pin stock. 



BLF61Z............................... ZEBRA PATTERN............................. $79.95 

BLF61V............................... VOODOO PATTERN........................... 79.95 

PATRIOT 

2-3/4” blade, 6-1/2” overall, 1” wide, .150” thick. Use 1/8” pin stock. 



BLF63Z............................... ZEBRA PATTERN........................... $109.95 

BLF63V............................... VOODOO PATTERN......................... 109.95 

FIRST RESPONDER 

3-1/4” blade, 7-1/8” overall, 5/8” wide, .135” thick. Use 1/8” pin stock. 



BLF65Z............................... ZEBRA PATTERN............................. $89.95 

BLF65V............................... VOODOO PATTERN........................... 89.95 

DESERT IRONWOOD EXHIBITION GRADE 

Ironwood is one of our favorite choices to compliment these beautiflul 

Damascus blades. There are two grades of Ironwood, Select 1 and Select 

2. Select 2 has more pattern and grain than Select 1. It’s your choice. 

2-5/8” blade, 8” overall, 1-1/8” wide, .150” thick. Use 1/8” pin stock. 

FITS SHEATH #3. 


BLF66Z............................... ZEBRA PATTERN........................... $119.95 

BLF66V............................... VOODOO PATTERN......................... 119.95 

POLYESTER PEARL 

BLACK CHERRY 

EMERALD GREEN 

WOASE1-Select 1 WOASE2-Select 2 

These are examples only. Patterns vary. 


WOASE1S........................ SCALES.............................................. $25.00 

WOASE1B........................ BLOCKS................................................ 25.00 

WOASE2S........................ SCALES................................................ 40.00 

WOASE2B........................ BLOCKS................................................ 40.00 

ANTIQUE GOLD 

PURPLE PASSION 

This material is pure polyester and it comes in beautiful colors and looks 

similar to mother of pearl. It gives an elegant look to any Damascus blade 

and looks nice with a white spacer placed underneath. It polishes with 

Jackson 51 white rouge. 

Four colors of polyester pearl are featured on this page. For more colors 

see page 16 of the catalog. Black cherry and purple passion also come in 

cylinders for the hidden tang knives. Cylinders are 1-1/2” in diameter and 

4-1/2” long. The scales are 1-1/2” wide x 5” long x 3/8” thick. 


POL10S........ BLACK CHERRY SCALES............... 3/8” thick............... $8.95 

POL10C-4..... BLACK CHERRY CYLINDER........... 4-1/2” long............ 10.95 

POL14S........ EMERALD GREEN SCALES..............3/8” thick................. 8.95 

POL20S........ ANTIQUE GOLD SCALES................ 3/8” thick................. 8.95 

POL22S........ PURPLE PASSION SCALES............ 3/8” thick................. 8.95 

POL22C-4..... PURPLE PASSION CYLINDER......... 4-1/2” long............ 10.95 


STAINLESS STEEL BLADES Camp & Kitchen 

TRADITIONAL CHEF’S CHOPPER BLADE 

13” overall length, 8” blade, 1-7/8” wide, 440C stainless steel, hollow 

ground, highly polished, sharpened to a fine edge. 


BL575C................... BLADE W/CRYO (-305F).............................. $17.45 

TRADITIONAL 8” CARVING BLADE 

SANTOKU BLADES WITH INDENTATIONS 

Slice, dice, chop and cut with our new line of Santoku style kitchen 

blades. These AUS8 stainless steel blades have been cryogenically 

treated to improve edge holding. They have indentations on both sides 

of the blade to reduce friction for more efficient cutting and to keep 

particles of food from sticking to the blade when cutting fruits and 

vegetables. All three blades will make a nice set to make for yourself or 

someone else. 

BL590C 

BL591C 

12-3/4” overall, 8” long blade. Three holes take 5/32” pin material, 440C 

stainless steel, hollow ground and highly polished. 


BL582C...................BLADE W/CRYO (-305F).............................. $13.95 

TRADITIONAL CARVING FORK 

11-3/4” overall, 7/8” wide fork. Great BBQ fork. 440C stainless steel, highly 

polished. Takes 5/32” pin material. 


BL583........................FORK ONLY................................................ $13.95 

TRADTIONAL COOK’S BLADE 

8” overall, 4” blade, 3 holes take 3/32” pin material. Made of 440C stainless 

steel. Hollow ground and highly polished. 


BL581C......................BLADE W/CRYO (-305F).............................. $6.95 

SUPER CHEF’S BLADE 

BL592C 

SANTOKU CHEF BL592C 

The blade dimensions of the Chef are: 11-3/4” overall, 7” blade length, 

0.095” thick. Use 1/8” pins for all holes or 7/32” Mosaic Pin for center 

hole. 

SANTOKU MID-SIZE BL591C 

The blade dimensions of the Mid-Size are: 9” overall, 5” blade length, 

0.056” thick. Use 1/8” pins for all holes or 7/32” Mosaic Pin for center 

hole. 

SANTOKU MINI BL590C 

The blade dimensions of the Chef are: 7” overall, 3” blade length, 0.056” 

thick. Use 1/8” pins for all holes or 7/32” Mosaic Pin for center hole. 


BL590C...................MINI BLADE W/CRYO (-305F)...................... $11.95 

BL591C...................MID-SIZE W/CRYO (-305F)............................ 14.95 

BL592C...................CHEF BLADE W/CRYO (-305F)...................... 17.95 

diamondstone 2-stage 

This sharpener is a quick and 

easy way to sharpen your kitchen 

knives. Diamond and ceramic 

stones. The ceramic stones sharpen 

and hone and the white stones 

give a finishing polish. 

CAT. NO. 

PRICE 

DS2.................................. $25.95 

10” blade, 14-1/2” overall, 2” wide, satin finished, hollow ground, 440C 

stainless steel. 5/32” holes for pin material. 


BL576C......................BLADE W/CRYO (-305F)............................ $21.45 

SUPER CHEF’S CARVER BLADE 

FAVORITE CHEF’S SANTOKU WITH STRAIGHT EDGE 

12-3/4” overall length, 8” blade 1-1/16” wide, satin finished. 5/32” holes 

for pin material. 


BL577C......................BLADE W/CRYO (-305F)............................ $18.95 

This blade is a great addition to your set of kitchen knives. It is used most 

frequently for chopping, slicing, and dicing of fruits and vegetables. The 

blade dimensions of the Chef are: 10-3/4” overall, 6” blade length. Use 

5/32” pins for all holes. The blade is made of 8A high carbon stainless and 

has been cryogenically treated. 


BL547C...................BLADE W/CRYO........................................... $15.95 

72 


STAINLESS STEEL BLADES Camp & Kitchen 

FAVORITE COOK’S BLADES 

STEAK BLADE 

Sample of Blade 529 finished with Spalted Maple Burl handle 

Voted best kitchen blades by the staff at Texas Knifemaker’s. 

BL529 FAVORITE COOK’S 

BL531 FAVORITE MID SIZE CHEF 

9” overall length, 4-3/4” blade, 5/8” wide and 1/16” thick, 

satin finished blade with 2-1/2” of serrations at the tip. 

Handle holes are for 1/8” pins with a larger center hole and 

end slot for easy assembly. A great stainles steel steak knife 

blade. Buy a dozen and save. 


BL477................BLADE ONLY.......................... $5.25/EA. 

BL477C..............BLADE W/CRYO (-305F).......... 8.75/EA. 

BL477DOZ.........BLADES ONLY.................... 55.00/DOZ. 

BL477DOZC......BLADES W/CRYO (-305F).. 97.00/DOZ. 

FAVORITE COOK’S 

BL476 FAVORITE UTILITY PARING 

12-1/4” overall length, 3/32” thick, 1-5/8” wide and a 7-3/4” blade. Fine satin finish and 

flat ground superior 8A high carbon stainless steel. Holes in handle are for three 5/32” 

diameter pins or two large holes for bolts. 


BL529..................................... BLADE ONLY....................................................... $15.95 

BL529C................................... BLADE W/ CRYO (-305F)...................................... 19.45 

FAVORITE MID-SIZE CHEF 

10-1/2” overall length, 6” blade, 1-3/8” wide maximum. Three holes for 5/32” pin material 

and two larger holes for bolts. 


BL531..................................... BLADE ONLY....................................................... $13.95 

BL531C................................... BLADE W/CRYO (-305F)....................................... 17.45 

FAVORITE UTILITY PARING 

7-1/2” overall length, 7/8” wide, 3-1/2” long blade and 1/16” thick 440 stainless steel. 

Fine satin finish. The handle is punched with holes for three 1/8” pins and two larger 

holes for bolts. 


BL476......................................BLADE ONLY......................................................... $8.95 

BL476C....................................BLADE W/CRYO (-305F)....................................... 12.45 

CHEF/COOKS KNIFE BLADE 

UTILITY/BONING BLADE 

6” long blade, 3/32” thick with three 5/32” diameter holes 

for pins. Satin finished and hollow ground. 


BLSUB6C..........BLADE W/CRYO (-305F)..............$19.45 

CLIP POINT PARING BLADE 




BLSCP3............ BLADE ONLY................................$11.95 

BLSCP3C..........BLADE W/CRYO (-305F)............... 15.45 

3” PARING BLADE 

This blade has an overall length of 13-1/4” with a blade length of 8”. It is 3/32” thick with 

three 5/32” diameter holes for pins. Satin finished and flat ground. 


BLSCK8...................................BLADE ONLY....................................................... $23.95 

BLSCK8C................................BLADE W/CRYO (-305F)....................................... 27.45 

SLICER/CARVER BLADE 




BLSSP3.............BLADE ONLY................................$11.95 

BLSSP3C......... BLADE W/CRYO (-305F)................15.45 

UTILITY/STEAK BLADE 

9” long blade, 3/32” thick with three 5/32” diameter holes for pins. Satin finished and 

hollow ground. 


BLSSC9.................................. BLADE ONLY....................................................... $19.95 

BLSSC9C............................... BLADE W/CRYO (-305F)....................................... 23.45 




BLSUS4.............BLADE ONLY................................$11.95 

BLSUS4C..........BLADE W/CRYO (-305F)............... 15.45 


440 STAINLESS STEEL BLADES Camp & Kitchen 

COMPETITION COOK-OFF BLADES 

These blades are of superior quality and are made of 

440C stainless steel. The handle of the Competition 

blades fits the shape of your hand for maximum comfort. 

The blades are satin finished. They are cryogenically 

treated, which increases their edge holding. Plus, they 

are sharpened and ready for you to customize with your 

choice of handle material. 

COMPETITION COOK-OFF 

STEAK BLADE 

COMPETITION COOK-OFF LARGE CHEF’S BLADE 

This blade is 14” overall with a 8-1/16” X 2” blade. The pinholes take 5/32” pin material. 

Cryogenically treated. 


BL584C...................BLADE W/CRYO (-305F)................................................$17.95 

COMPETITION COOK-OFF SMALL CHEF’S BLADE 

This steak blade has a 2” false edge. Use 1/8” pin material for 

the pinholes. The blade is 4-7/16” long X 11/16” wide, and the 

knife is 8-3/4” overall. Cryogenically treated. 


BLSK1....................BLADE W/CRYO (-305F)...............$8.95 

COMPETITION COOK-OFF PARING BLADE 

The blade is satin finished, not serrated and has an overall length of 10-7/8” with a 

5-1/2”long X 1-3/8” wide blade. The pinholes take 5/32” pin material. Cryogenically 

treated. 



COMPETITION COOK-OFF 

SERRATED CHEF’S BLADE 

This is a handy little knife for the kitchen. It is 7-1/8” overall, 

with a 3-1/4” X 11/16” blade, and 3 holes for 1/8” pin material. 

Satin finished, flat ground, 440C stainless steel. Cryogenically 

treated. 


BL578C...................BLADE W/CRYO (-305F).............. $8.95 

THE TRAIL RIDER 

This serrated, satin finished blade is 10-3/4” overall, and the blade length is 

5-5/8” long X 1-1/2” wide. The pinholes take 5/32” pin material. Cryogenically 

treated. 


BL586C...................BLADE W/CRYO (-305F)................................................ $11.95 

COMPETITION COOK-OFF CARVER 

An oversized steak blade with a substantial handle for cutting 

big steaks. This 440C stainless, satin finished, serrated steak 

blade is 10-1/4” overall with a 5” blade, 1-1/8” width and 5/32” 

pin holes. 


BL729C...................BLADE W/CRYO (-305F).............. $8.95 

COMPETITION BREAD SLICING BLADE 

Great BBQ Brisket Knife. 440C stainless steel. The blade is hollow ground, satin 

finished. It is 15” overall with a 9-1/4” blade, 3 holes for 5/32” pin material. Cryogenically 

treated. 



COMPETITION CLEAVER 

15-1/2’ overall with a 9-1/8” long blade. The blade is 1-1/16” wide and 

serrated. Three 5/32” diameter pins will fit the holes. Satin finished and 

flat ground. Cryogenically treated. Attention fishermen, try as a stout fillet 

knife. 


BL587..................... BLADE ONLY................................................ $12.50 

BL587C................... BLADE W/CRYO (-305F)................................ 16.00 

COMPETITION COOK-OFF FORK 

12” overall, 3-5/8” x 1” fork, 3 holes for 5/32” pin material. Satin 

finished. 440C stainless steel. 


BL580.....................FORK ONLY....................................$13.95 

Stainless. Overall length of 11-3/4” with a 3” wide by 6” long blade and a 

1/8” thickness. The hole sizes are: 1 @ 5/32”, 1 @ 1/4”, 1 @ 3/16” x 1/4”. 

Satin finished and hollow ground. 


BLCLEV..................BLADE W/CRYO (-305F).............................. $19.95 

74 


440 STAINLESS STEEL BLADES Camp & Kitchen 

TEXAS BBQ FORK 

13” overall length, with 5” by 1-1/4” forks, and 5/32” diameter holes for 

pins. Perfect for brisket at your next BBQ. 


BL708BBQ...............FORK ONLY................................................ $13.95 

ARTIC ULU BLADES 

Invented by the native Alaskan people over 5000 years ago, the Alaskan 

ULU (OO-loo), was used primarily to clean and skin fish. Today, people find 

them very useful in the kitchen for cutting and dicing and also out in the 

field. Originally the handles were made of bone, ivory or wood inscribed 

with distinctive designs, but today many materials are available to use on 

the handles. Use your imagination, and make several. We carry two styles 

of blades to choose from. They are stainless steel, high carbon, mirror polished 

blades with 6” cutting edges and oversize 3/16” holes. These blades 

have been cryogenically treated to increase their edge holding ability. 

COOKS FORK 

Large strong tines, 3/32” thick, 10-1/2” overall, 3-3/4” fork length, with four 

5/32” diameter holes for pins. Satin finished. 


BLFORK...................FORK ONLY................................................ $16.95 

THE HAMMER HAWK 


BLULU1....................FANTAIL BLADE W/DEEP............................. $8.95 


BLULU2....................BROADTAIL BLADE W/DEEP......................... 8.95 


PROFESSIONAL LETTER OPENER 

Hand forged. Unbeatable for driving tent stakes and other camp chores 

as well as throwing. 


BL301.................... TOMAHAWK.................................................. $26.95 

BL301H.................. EXTRA HICKORY HANDLE.............................. 3.95 

THE BLACK HAWK 

BLL01 example above is shown with Star Spangled Banner polyester 

pearl handle material, Cat. No. POL26S. 

9-5/8” overall length, 5-1/8” long blade, 1/16” thick hardened 6A high carbon 

stainless steel with a 3/4” wide handle and 3/32” diameter holes for pins. 

Highly polished and RC 56 hardness too. Looks terrific when dressed up 

with Water Buffalo, Polyester Pearl or just about anything you can dream 

up. Beveled on one side of the blade for easy cutting in either direction, 

like a quality letter opener should. The 4” length handles fit just great. 


BLL01.....................OPENER ONLY................................................$8.95 

BLL01C................... OPENER WITH DEEP CRYO TEMP...............12.45 

Cast from a steel alloy. Weighs 1-3/4 lbs. with a 19” hickory handle. Ideal 

for camping, backpacking and throwing. 


BL300.................... TOMAHAWK.................................................. $24.95 

BL300H.................. EXTRA HICKORY HANDLE.............................. 3.95 

WOOD CARVER 4 PIECE SET 

EXECUTIVE LETTER OPENER 

This letter opener is made of high polished stainless steel and is 8-1/4” 

overall. Use 3/32” pin material. 


BL037.....................OPENER ONLY............................................... $8.95 

Four piece wood carver blades made from high carbon stainless steel 

and cryogenically treated and double tempered for extra edge holding. 

(Sold in sets only). 


BL763C...................4 PIECE SET W/CRYOGENIC...................... $19.95 



CARBON STEEL KNIFE BLADES Camp & Kitchen 

This line of blades is suitable for kitchen and buck skinners. All 

patterns are old, proven classics that date back to the time when 

a family purchased one or two knives and then used them for everything. 

The knife collectors will recognize the Russell trademark, 

which has been used since 1834. These blades are of high quality 

carbon steel, flat ground for ease in sharpening and cutting. No 

frills and nothing wasted on cosmetics, just good usin’ knives. 

PARING BLADE 

CAMP KNIFE BLADE 

5” long blade, 9” overall, .094” thick, 1-1/8” wide, very sturdy, three 

5/32” diameter holes. 

CAT.NO. 

PRICE 

BLCAM......................................................................................... $12.95 

RUSSELL GREEN RIVER BLADE 

Paring knife, spear point, 3-1/4” blade, 7-1/4” overall, .057” thick, with three 

5/32” diameter holes for pins or rivets. 

CAT.NO. 

PRICE 

BL033...............................................................................................$8.95 

PACIFIC PATCH PARING BLADE 

4-7/8” long blade, 9” overall, .088” thick, 1” wide, spear point, also known 

as Danby’s knife, three 5/32” diameter holes for pins and rivets. 

CAT.NO. 

PRICE 

BLRGR..........................................................................................$12.95 

SHEEP SKINNER BLADE 

3-1/2” long blade, 6-3/4” overall, .074” thick and three 5/32” diameter 

holes. 

CAT.NO. 

PRICE 

BL035...............................................................................................$8.95 

RIPPER BLADE 

4” long blade, 8-3/4” overall, .075” thick, 3/4” wide spear point with three 


CAT.NO. 

PRICE 

BL040...............................................................................................$8.95 

SHEATH KNIFE BLADE 

9-5/8” overall length , .133” thick, 1-1/4” wide, 5-1/4” long blade curved 

upward for maximum skinning, three 5/32” diameter holes for pins and 

rivets. This is an excellent skinning blade. 

CAT.NO. 

PRICE 

BLSSK........................................................................................... $12.95 

BONING BLADE 

6” long blade,10-1/2” overall, .115” thick, 1” wide, very sturdy with three 

5/32” diameter holes for pins and rivets. 

CAT.NO. 

PRICE 

BLBON......................................................................................... $ 12.95 

BUTCHER BLADE 

4-1/2” long blade, 8-1/2” overall, .085” thick, 1-1/4” wide and three 


CAT.NO. 

PRICE 

BL045.............................................................................................$12.95 

BUFFALO SKINNER 

7” long blade, 11-1/2” overall, .093” thick, 1-1/4” wide, a good size butcher 

knife blade. 

CAT.NO. 

PRICE 

BLBUT........................................................................................... $14.95 

TEXAS BUTCHER BLADE 

5” long blade, 9” overall, .138” thick, 1-1/4” wide, three 5/32” diameter 15-1/8” overall carbon steel blade. Blade is 10” long, .108” thick with a 

holes for pins and rivets. This one is the real skinner blade. 

maximum width of 1-5/8”. 

CAT.NO. 

PRICE CAT.NO. 

PRICE 

BLBUF........................................................................................... $12.95 BLBUTEX...................................................................................... $19.95 

76 


CARBON STEEL AND LAMINATED KNIFE BLADES, ETC. 

SOLIGEN CARBON STEEL KNIFE BLADES 

LAMINATED STEEL BLADES 

The following knife blades are all high carbon German made hunting 

knife types that we are sure you will enjoy finishing. They are also 

hidden tang type, which allows more individual latitude in fashioning 

the guard, handle and pommel. Gives it your personal touch. 

BL601 

BL600 

SUPREME SKINNER 

9-1/2” overall length, 5” long blade, 5/32” thick thumb grooves, 1-1/4” wide, 

hollow ground, and nicely upswept. Usually they come threaded 10/24 for 

tang nut #1. FITS SHEATH #5 


BL170 ....................BLADE ONLY............................................... $29.95 

LARGE DEEP BELLY SKINNER 

9-1/4” overall length, 5-1/4” long blade, 5/32” thick, 1-1/4” wide, nice clip 

point on an old time shape for those big skinning jobs. False edge at top 

and flat ground satin finish set this off as a good-looking skinner blade. 


BL147.....................BLADE ONLY................................................ $29.95 

SMALL DEEP BELLY SKINNER 

BL600 and BL601 are composed of 3 laminations of steel. The center 

is razor blade hard and the outer laminations are softer and protective of 

the edge bearing center. This ingenious design works to give the blade 

a lasting edge with increased flexibility. The center lamination registers a 

59 on the Rockwell “C” scale and therefore stays sharp for a long, long 

time. It also extends through the entire blade so the edge won’t wear off 

with repeated sharpening. These blades have a correctly curved section 

for skinning and a straight section for slicing. 

BL111is not laminated for a reason. A blade of this size (2-11/16” long) 

needs to be thin to be useful. Laminating a blade this small would make it 

too thick. What you have in the BL111, or what is called“The Runt”, is the 

smallest blade of their line. It is razor blade hard and compact making it a 

good choice for patch knives for muzzleloaders, trout knives for fisherman, 

boot knives, small game knives, or wood carvers. 


BL600....................... NORSEMAN 3-1/4” long blade.................... $19.95 

BL601....................... VIKING 3-3/4” long blade............................. 21.95 

BL111........................ THE RUNT 2-11/16” long blade..................... 16.95 

LAMINATED CARBON STEEL BLADES 

BL111 

BL607 

BL608 

8-1/2” overall length, 4-1/2” long blade, 1/8” thick, 1” wide, flat ground 

and satin finished blade. Same as BL147 above, but smaller. Tang nut 

#1. FITS SHEATH #7. 


BL146 ....................BLADE ONLY................................................$24.95 

DROP POINT UTILITY BLADE 

The “Little Swede” and the “Big Swede” are laminated carbon steel baldes 

from Sweden. The blade is a three part laminate with a core of high carbon 

steel protected by sides of lower carbon outer steel. The core of these 

laminated blades is very hard (61-62) Rockwell C. The “Big Swede” has 

a blade length of 4-1/4” and is 7/8” wide and 0.100” thick and has a 4-1/4” 

long hidden tang. The “Little Swede” has a blade length of 3-3/4” and is 

5/8” wide and 0.105” thick and has a 3-7/8” long hidden tang.. 


BL607....................... BIG SWEDE 4-1/4” long blade.................... $22.95 

BL608....................... LITTLE SWEDE 3-3/4” long blade................ 17.95 

CAST IRON SPEAR POINT 

8-1/4” overall length, 5” long blade, 5/32” thick, 1-1/8” wide, flat ground 

and satin finished. Tang is threaded 10/24 for tang nut #1. FITS 

SHEATH #8. 


BL132.....................BLADE ONLY............................................... $24.95 

13-1/2” overall length and 2-1/2” maximum width. Tang is 3/16” thick and 

15/16” wide, 3-1/2” long with two indentations for holes to be drilled out. 

Cast iron with four ribs and very tough. Weighs 1 lb. 6 oz. Maximum thickness 

through ribs is 7/16”. 


BLSP1....................BLADE...........................................................$29.95 


STICK & CANE MAKING SUPPLIES 

WATER BUFFALO HANDLES 

WBHAND1 WBHAND2 WBHAND3 

Beautiful carved Water Buffalo Horn handles for your walking sticks. 

Since the handles are a natural material, no two are exactly alike. They 

are usually a solid black or black with a few white striations. 


WBHAND1......... 5” long x 1” diameter at grip............................... $14.95 

WBHAND2......... 5” long x 1” diameter at grip................................. 14.95 

WBHAND3......... 5” long x 1” diameter at grip................................. 14.95 

ROYAL BRASS CANE HEAD 

The Royal brass cane head is made of solid 

brass with a carved pattern on the surface. 

The cane head comes with an internally 

threaded 1” diameter collar for screwing onto 

the shaft of your cane. If you want your cane 

to be segmented, a 1” cane joint is available 

separately. Instructions are included. Use a 

waterproof epoxy. 


BRHAND1.......... 5” long x 1” diameter at grip............................... $18.95 

NICKEL SILVER, BRASS & COPPER COLLARS 

BRASS STAFF TIP WITH STEEL ICE SPIKE 

This walking stick tip not only protects your wood 

from scuffing and wear, but also adds elegance to 

your project. The solid brass walking staff tip will 

fit shafts with an end diameter of 3/4” or larger. Included 

with the brass tip (1-1/4” long) is a rubber tip 

(5/8” long) which comes with a fixing screw. Also, for 

icy, wet or rugged conditions, you can interchange 

a stainless steel tip (3/4” long) with the rubber tip. 

Instructions are included.. 


BRTIP1 Brass Staff Tip, Rubber Tip, Stainless Steel Tip ..... $24.95 

ALPINE SPIKE 

The alpine spike is a polished steel spike that 

can be attached to the end of your staff or cane. 

Internal diameter of ALSPIKE1 is 7/8”, inside 

depth is 1” and overall length is 2-1/4”. Internal 

diameter of ALSPIKE2 is 15/16”, inside depth 

is 1-1/8” and overall length is 2-3/8”. Great for 

rocky, rugged conditions or icy terrain. Rubber 

tip optional. 


ALSPIKE1......... 7/8” x 1” x 2-1/4”...................................................$8.95 

ALSPIKE2......... 15/16” x 1-1/8” x 2-3/8” .........................................8.95 

RUBBER TIP 

These beaded collars come in nickel silver, brass and copper high polished 

finishes. They make an elegant addition to any cane or stick. 

CAT. NO. FINISH & SIZE PRICE 

COLNS21.......NS - 21mm ID x 24.5mm high X 25.08mm OD........ $8.95 

COLNS23.......NS - 23mm ID x 24.1mm high x 27mm OD............... 8.95 

COLNS25.......NS - 25mm ID x 25.25mm high x 29.2mm OD.......... 8.95 

COLBR21.......Brass - 21mm ID x 24.5mm high x 25.08mm OD...... 3.95 

COLBR23.......Brass - 23mm ID x 24.1mm high x 27mm OD........... 3.95 

COLBR25.......Brass - 25mm ID x 25.25mm high x 29.2mm OD...... 3.95 

COLCO23.......Copper - 23mm ID x 24.1mm high x 27mm OD........ 5.95 

BRASS JOIN 

Brass join. Made from cast brass, turned, 

threaded and polished. Threaded 3/8” on one 

side and 5/16” on the other side. Comes in 

3/4” and 1” diameter. 


JOIN1................. 1” diameter........................................................... $6.95 

JOIN2................. 3/4” diameter.......................................................... 6.95 

MAKE YOUR OWN WALKING STICKS 

Discover the world of crafting canes and staffs. 

Learn from woodworker and author, Charlie 

Self, how to make simple creations or create a 

fancy "one of a kind" work of art. Fifteen projects 

are included in the book with step-by-step 

instructions, helpful sidebars, and full-color 

photographs. We like this book a lot, especially 

the excellent pictures and explanations for stick 

making. Soft cover with 141 pages in color. 


PUB40............... BOOK................................................................. $17.95 

Rubber ferrule fits over the alpine spike for 

nonrugged terrain. The tips are 1-5/8” high and 

1-1/8” diameter at the base. 


RUBTIP1............ 1-5/8” high x 1-1/8” base...................................... $2.95 

FERRULES (END CAPS) 

Brass ferrules without steel tips. Lacquered antique 

finish that gives a grey/brown color. This 

finish can be rubbed or buffed off to give a bright 

brass finish. Taper the end of the stick to get a 

tight fit and secure with waterproof epoxy or 

pins. 


BRTIP2.............. 7/8” high x 1” (25mm) I.D (inside opening)........... $1.95 

BRTIP3.............. 7/8” high x 13/16” (21mm) I.D (inside opening)..... 1.95 

BRTIP4.............. 7/8” high x 3/4” I.D (inside opening)....................... 1.95 

BRTIP5.............. 7/8” high x 7/8” I.D (inside opening)....................... 1.95 

BRTIP6.............. 7/8” high x 1-1/8” I.D (inside opening).................... 1.95 

ZINC COUPLER 

This zinc coupler is turned, threaded 

and polished. The internal thread and 

screw is 1/4” - 20. Overall assembly 

is 2” and each piece is 1”. They are 

installed by drilling a 7/16” diameter 

hole into the end of each piece to be 

CAT. NO. 

PRICE 

joined. Glue the coupler in place using 

a water resistant 

ZTHREAD............................$6.95 

epoxy. 

WATER BUFFALO SPACER 

This is a nice spacer to use on your walking stick or cane. 

1” diameter x 1-1/2” long. Usually black but sometimes 

there are a few white striations. 


WBSP23............ SPACER...................................... $3.25 

78 


Heat Treat and Cryo 

Date____________ 

10649 Haddington, #180 cUST. I.D. nO. (if known)____________ 

Houston, TX 77043 

return after heat treatment to: 

FOR OFFICE USE ONLY 

Please Circle: 

paid 

pickup 

ship 

DAYTIME PHONE (MUST BE INCLUDED): 

Method of Payment: 

Check or Money Order 

VISA 

AMERICAN 

EXPRESS 

DISCOVER 

CARD 

MASTERCARD 

C.O.D. 

USA only 

* 

Month / Year 

ExpirationDate 

Credit Card Number 

3 Digits on Back of Card 

or 4 Digits on Front of Card if Am. Ex. 

approval signature:______________________________________ 

please read the following: 

1. Blades must have a name or logo permanently stamped or etched on blade or tang. If there is not name or logo, please include 

an outline of your blades on the back of this form or a separate piece of paper to help us keep up with your blades. 

2. Please do not use duct tape on blades or packaging. Maximum overall length is 20 inches. 

3. Please do not attach anything to blade that will melt below 2500 F. 

4. Blades must be clean. Please protect points from damage during shipping to TKS. 

5. All blades must be in our office by 5:00 p.m. on Monday to be entered for heat treatment Tuesday morning. We make every effort 

to ship the blades that have been heat-treated the following Tuesday. 

6. Our guarantee is that every possible effort will be made to give each blade the best combination of hardness and toughness 

through the proper use of equipment. However, if a blade is damaged due to our handling or equipment malfunction, our liability 

is limited to the replacement of an equal amount of the same steel used in the damaged item. Any further responsibility will not 

be accepted nor will we be responsible for warpage due to unequal grinding or grinding the blade too thin. We also reserve the 

right to refuse any blade that could have serious heat treating or warpage problems we could not correct. 

heat treating and tempering cost: 

List quantities of each type of steel in the space provided.(Air Quench Only) 

440C___ ,440V___,154CM___, ATS34___, A-2___, D-2___ QUANTITY PRICE 

Overall lengths less than 10 inches...1 to 7 blades @ $5.50 each................................ $ 

Overall lengths less than 10 inches...8 or more blades @ $4.95 each......................... 

Overall lengths of 10 to 20 inches...All blades @ $10.00 each..................................... 

440C___ ,440V___,154CM___, ATS34___, A-2___, D-2___ 

All springs, rockers, and spring holders for folding knives @ $4.00 each.................. 

Cruwear___, Vascowear___, BG42___, CPM10V___, and other exotic steels 

All blades of this material will cost $15.00 for each blade........................................ 

extra tempering sequence: 

Double draw (temper) of steel other than D-2, A-2, 440 V or triple draw for Cruwear and 

Vascowear at customer’s request for hardening to different hardness than we normally 

attain will be an extra charge of $4.00 per item or blade..............................................._________ _________ 

sub-zero quench: (-305 degrees F) @ $4.00 each...................................................... _________ _________ 

UPS (2 lbs. or less) Includes ins. of $100.00. 

*UPS Add’l insurance (over $100 value) 

U.S.P.S. Priority (2 lbs or less). 

SHIPPING CHARGES 

$ 7.95 minimum 

$ 0.50 per $100 extra 

$ 7.95 minimum 

*U.S.P.S. Add’l insurance $100.00 = $2.30 

$200.00 = $3.35 

$300.00 = $4.40 

Total for Merchandise & Services 

Total Shipping Charges 

*Additional Insurance Charges 

TX Residents add 8.25% Sales Tax 

TOTAL AMOUNT 

return of this form completed will 

expEDIte the return of your blades 

important! Value of blade(s) $__________________ 

So your blades can be insured properly. 


Order Form 

Date:___________________ 

Texas Knifemaker’s Supply 

10649 Haddington, #180 

Houston, TX 77043 

Enclose Check or Money Order or will ship 

C.O.D. USA only - UPS C.O.D. Fee $9.00 

Foreign Orders must be paid in Advance VISA/ 

MC or cashier’s check in U.S. funds 

Date Received Date Shipped Gathered by Checked By Checked By Packed By 

Billing address: Cust. I.D. # 

Name 

Address 

City, State, Zip 

Phone( ) Fax(____) 

E-mail Address 

Shipping Address: 

(if different from billing address) 

Name ________________________________________ 

Address ______________________________________ 

City, State, Zip _________________________________ 

Phone (____)___________Fax (____)____________ 

QTY. 

CAT. NO. 

DESCRIPTION 

item price 

total price 

PRICES SUBJECT TO CHANGE WITHOUT NOTICE 

IMPORTANT: When ordering steel please allow additional 

shipping charges. 

WHICH ACTION DO YOU PREFER FOR OUT OF 

STOCK ITEMS? 

SUBTOTAL 

Shipping Charges $7.95 Minimum (Taxable) 

TX Residents add 8.25% Sales Tax 

Houston Residents add 8.25% Sales Tax 

TOTAL 

CREDIT MEMO TOWARD FUTURE ORDER 

REFUND (REFUNDS FOR PURCHASES PAID FOR 

WITH PERSONAL CHECKS MAY TAKE UP TO 28 

DAYS FOR PROCESSING.) 

ANY RETURN MUST BE MADE WITHIN 10 DAYS OF DELIVERY 

OR ITEMS WILL BE SUBJECT TO A 15% RESTOCKING FEE. 

NO RETURNS AFTER 30 DAYS 

CHECKS RETURNED FOR ANY REASON WILL BE CHARGED 

$ 25.00 

Thank you for your order! 

Order Toll Free (888) 461-8632 

order ON-LINE AT www.texasknife.com 

Method of Payment: 

Check or 

Money Order 

VISA 

Credit Card Number 

Month / Year 

Expiration Date 

Cardholder’s Signature 

AMERICAN 

EXPRESS 

DISCOVER 

CARD 

MASTERCARD 

* 

C.O.D. 

USA only 

*Three digits 

on back of 

credit card. 

*American Express 

- Last 

four digits on 

front of card 

80 


Paper Based Micarta 

Linen Based Micarta 

Canvas Based Micarta 

ORDERING AND POLICY INFORMATION 

Technical Help 

Please call us at 713-461-8632 if you have questions. Our sales people will be glad to answer questions on how to make knives, use our products or answer 

any shipping questions you may have. Also you may find help on our internet site at www.texasknife.com. 

Fax 

You may fax your order to us 24 hours a day at 713-461-8221. 

Hours for ordering 

Our hours for ordering are 8:00 a.m. until 5:00 p.m. (CST) Monday through Thursday, 8:00 a.m. until 3:00 p.m. Friday, and 9:00 a.m. until 12:00 p.m. Saturday. 

We are closed Sunday and the following holidays: New Year’s Day, Memorial Day, July 4 th , Labor Day, Thanksgiving and Christmas. 

Payment 

We accept checks, money orders, and cashiers checks in U.S. funds, VISA, MasterCard, Discover, and American Express. There is a $25.00 fee for returned 

checks. 

Shipping 

Our goal is to ship within 24 hours of receiving your new order. We ship UPS whenever possible, so please give us a street address or route and box number. 

We will also ship COD; however, orders shipped COD via UPS will need to be paid by check or money order only. UPS will no longer accept cash. Post office 

box addresses will be shipped United States Postal Service Priority mail. 

Back Orders 

We DO NOT backorder unless you specifically request that we do so. On back orders, you pay shipping but there is no handling charge. You may indicate 

a second or third choice of substitution on your order form. When a product is out of stock and you have paid by check, cash or money order, we will issue a 

credit memo or refund. Please indicate on the order form whether you prefer a credit to your account or a refund. If a personal check is used to pay 

for the purchases, it may take up to 28 days for processing before a refund is issued. 

Returns 

If you have a problem with our merchandise or if a question should arise, please call a member of our staff who will assist you with that problem. Returns 

or exchanges must be approved and returned to us within 10 days of delivery or items will be subject to a 15% restocking fee. No returns will be accepted 

after 30 days of purchase. A copy of the original invoice must accompany any return. We will not accept any COD return packages. Items must 

be returned by regular UPS or regular mail. 

Catalogs 

Catalogs in the US are $4.00 prepaid. International catalogs are $10.00 prepaid. 

International Orders 

Please call for shipping charges. We ship Parcel Post Air or UPS, whichever you prefer, and charge actual shipping and insurance charges plus a $1.00 

handling fee. 

Equipment 

Equipment must be prepaid with VISA, MasterCard, Discover, or American Express. 

PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

product list - Texas Knifemaker's Supply

Create successful ePaper yourself

Delete template?

Save as template?