1099.SARGuide sell sht 11 - Sargent Locks

The best combination of strength,
durability, aesthetics and innovation—
the most complete line of exit
devices in the industry
Narrow Stile Mortise Lock
8300 Series
Narrow Stile Rim
8500 Series
Surface Vertical Rod
8700 Series
Mortise Lock
8900 Series
Narrow Stile Concealed
Vertical Rod 8400 Series
Concealed Vertical Rod
MD8600 & WD8600 Series
For Metal and Wood Doors
Rim 8800 Series
On all
80 Series
FLATLITE ® is a registered
trademark of E-LITE
Technologies, Inc.
SARGENT Manufacturing has been a
leading manufacturer of architectural
hardware since the 1800's. In 1995,
SARGENT became part of ASSA ABLOY,
the world's leading lock group. Since then,
SARGENT has focused on manufacturing
processes, product quality, and continues
to lead the industry in new product
introductions and innovations.
SIMPLICITY
• Easy installation!
• Maintenance free design
• Few moving parts – less wear,
less maintenance
• Modular construction
• No need to remove device from
door for maintenance or keying
STRENGTH & DURABILITY
• Made of finest component materials
• Heavy duty mounting construction
• Built to withstand abusive conditions
• Available options to meet Dade County
Protocols and other local hurricane
code requirements for high wind load
and missile impact*
• 5 year warranty
AESTHETICS
• Clean, simple, aesthetically pleasing
design
• “True” architectural hardware finishes
consistent with BHMA/ANSI standards
• Coastal Series decorative lever trim
available
INNOVATION
• Broad offering of electro-mechanical
solutions for the most demanding
access/egress control applications
• anti-microbial finish
coating offers a new level of protection
• CTL (Center and Top Latching) Vertical
Rod Devices offer less bottom rod
convenience with true center latching
for added security
* Consult factory
®
SARGENT
Raising the Bar of Excellence.
SARGuide FEATURES
• SARGuide is illuminated utilizing the
patented FLATLITE ® electroluminescent
lamp embedded within the LEXAN touch
pad insert and base (no exposed
components)
• Supplements building exit signs
required by code
• UL Listed for use on panic (UL 305)
and fire-rated (UL10C) exit devices
• SARGuide can be wired for continuous
operation (always on), or can be wired
into fire alarm system for operation only
when alarm is activated
• Dual voltage: 24 VAC or VDC input from
SARGENT (or other) power supply with
battery back-up
• Available with mechanical, and many
electro-mechanical, exit devices
• Lexan insert is easily field reversible.
Specify hand when ordering
• Other verbage available with the lamp
product upon request (special order)
• Lamp replacement kit available. Three
to four year life under continuous operation.
Light life increases with intermittent
use. Lamp brightness will degrade over
time. Electroluminescence does not
degrade over extended periods of non-use
• SARGuide can be used as a stand alone
feature or as an integral part of E-Lite
Technologies' E-Lume-A-Path TM Egress
Path Marking System. E-Lume-A-Path
enhances the ability of a person to escape
a building by illuminating the path to
safety through existing exits. The system
will respond to a power outage or fire
alarm signal and consists of a strip of
FLATLITE electro-luminescent lamp at the
floor level that can go down hallways,
around corners and stairwells, hundreds of
feet in length. It can help supplement
currently required Egress equipment such
as Exit Signs and Emergency Lights, which
may have limited effectiveness when
building occupants do not know the
location of secondary exits.
800-727-5477 | www.sargentlock.com