ArcGear - Theovine

www.pmmiintl.com

STEEL GRIP
Arc Flash Clothing - FR Rated Workwear pages 3 - 15
Arc Flash Kits pages 18 - 21
FR Knits & Fleeces
Classic T’s - Turtlenecks - Hooded Fleece Sweatshirts pages 16- 17
COMASEC GLOVES
Linemen’s Gloves Electrical Protection - Class 00, 0, 1, 2 & 3 pages 22 - 23
CIMCO INSULATED TOOLS
Insulated Safety Tools - Personal Protective Equipment pages 24 - 42
ELECTRO STATIC DISSIPATIVE MATTING
Military Smooth & Corrugated Switchboard Runners page - 43
1147 Bellamy Rd. N., Suite 5, Scarborough, ON M1H 1H6
416.289.0588 / 888.283.7664 / www.pmmiintl.com

-
S e c o n d a r y W o r k w e a r - H a z a r d R is k C a t e g o r y 1 & 2 P r o t e c t io n
®
WESTEX
Soft by
INDURA® Ultra
INDURA ® Ultra Soft
by WESTEX®
Lightweight and durable F.R. treated fabric. Deemed “Extended Wear” as the garments remain flame resistant for the
useful life of the garment, assuming properly cleaned as instructed on label of item. Secondary protection to safe guard
workers exposed to open flame, sparks, and other similar sources. To enhance longer wear, our garments receive
additional topstitching at the critical stress points.
Shirts
8 cal/cm 2 ARC RATING
MBU7 9575 = 7 oz. Medium Blue
STOCK: Small thru 4XLarge
KU7 9575 = 7 oz. Khaki
STOCK: Medium thru 3XLarge
• Button front closure
• Breast pockets with flaps
• 2 button adjustment at cuff
• SIZE: Small thru 6XLarge
Pant
11 cal/cm 2 ARC RATING
NBU9 9460 = 9 oz. Navy Blue
• 7 belt loops with reinforced waistband
• Standard 4 pocket construction
• Zipper fly closure
STOCK: 30” thru 46” waist
32” inseam standard
KU9 9460
WARNING:
NFPA 70E
Compliance requires
wearing the
Shirt & Pants
or Coverall
as ONE UNIT.
= 9 oz. Khaki
Coverall
NBU7 9800
8 cal/cm 2 ARC RATING
• Navy blue, 7 oz.
• Lay down collar, lapel style, action back
• Covered 2-way zipper with snap at neck and waist
• Elastic in waistband
• Closed sleeve with snap adjustment
• 2 breast pockets, left with pencil divider
• 2 hip pockets, 2 reach-in pockets
with side slits and modesty flaps
• Right leg tool pocket
• SIZE: By Chest even sizes 36” thru 66”
STOCK: 38” thru 56”
Equipment Tote Bag
AG-BAG
• 600 denier lightweight khaki Nylon
• Inner glove pocket with VELCRO closure
• Water repellent
• Handling straps with snapped keeper
• Zipper closure
STOCK
As Stated in the
Established Standards.
The USER
MUST DETERMINE
LEVEL of EXPOSURE.
4

UNIVERSAL
Electrical Arc Accessories
SLOTTED
10 cal/cm 2 ARC RATING
Meets ANSI Z87.1
4693 Assembly Includes
• 4656 Faceshield with chin cup
• 4665 Universal visor/adapter
• 4670 Dielectric hard cap
STOCK
4692 Assembly Includes
• 4656 Faceshield with chin cup
• 4660 Slotted visor/adapter
• 4670 Dielectric hard cap
STOCK
4656 Replaceable Faceshield
with Protective Chin Cup
• Attaches to the hard cap visor/adapter
(Universal & Slotted)
STOCK
SLOTTED
UNIVERSAL
SIZE
CHART
CHEST
SIZE
SECONDARY WORKWEAR
SHIRT (MEN’S)
(ORDER BY CHEST SIZE & GARMENT LENGTH)
SM MD LG XL 2XL
(36/38) (40/42) (44/46) (48/50) (52/54)
4660 Visor/Adapter
• For Slotted Hard Caps
• Flip-up adjustable positioning
• One size fits all
STOCK
4665 Visor/Adapter
• For NON-Slotted Hard Caps
• Flip-up adjustable positioning
• One size fits all
STOCK
SLEEVE
LENGTH
31 33 34 35 36
OPTIONAL LENGTHS
• Short - 2” Sleeve Length - 1 1 / 2” Tail Length
• Regular Per Specifications
• Long + 2” Sleeve Length + 1 1 / 2” Tail Length
• Tall + 3” Tail Length Only
** Special Optional Sleeve Lengths CONTACT PMMI
CXK 2310 Sock Hood (full face )
HAZARD RISK CATEGORY 2
• ARC RATING 23 cal/cm 2 head area
• ARC RATING 12 cal/cm 2 neck area
• 2-ply stretch 7.4 oz. Knit CarbonX®
with 1-ply cape
• Flame resistant and launderable
STOCK
SIZE
CHART
WAIST
SIZE
SECONDARY WORKWEAR
PANTS (MEN’S)
(ORDER BY WAIST SIZE & INSEAM LENGTH)
30 32 34 36 38 40 42 44 46 48
SPECIFY DESIRED INSEAM
Inseam Lengths 28” 30” 32” 34” 36”
Standard Inseam Length 32”
LIABILITY STATEMENT
DISCLAIMER OF WARRANTIES
These products are warranted only against defects in manufacture. Because
applications vary, no use warranty is implied or intended. The Buyer
should make a careful analysis of the use and purpose for which these
products are purchased. It will be the Buyer’s duty and responsibility to
determine whether these products will adequately protect the wearer or
user in the environment in which they are used.
There are no warranties which extend beyond the description on the face
hereof. Steel Grip, Inc., and the distributors of its products disclaim and
exclude all other warranties, whether implied or otherwise, and expressly
disclaim and exclude any warranties that might otherwise be implied,
including the implied warranties of merchantability and fitness for any particular
or intended use, purpose, or application. No oral representation
inconsistent with the above shall be binding to Steel Grip, Inc.
We certify that these goods are produced in compliance with all applicable
requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as
ammended and of regulations and orders of the United States Department of
Labor issued under Section 14 thereof.
SIZE
CHART
CHEST
SIZE
SLEEVE
LENGTH
SECONDARY WORKWEAR
COVERALLS (MEN’S)
(ORDER BY CHEST SIZE & OPTIONAL LENGTH)
36 38 40 42 44 46 48 50 52 54
32 32 34 34 35 35 36 36 37 37
STANDARD
INSEAM 27 27 28 28 29 29 30 30 31 31
LENGTH
OPTIONAL LENGTHS
• Short - 2” Sleeve Length and Inseam - 1 1 / 2” Torso
• Regular Per Specifications
• Long + 2” Sleeve Length and Inseam + 1 1 / 2” Torso
• Tall + 1 1 / 2” Torso Length Only
Standard Inseam Fits 30” - 34” inseam
For further information LOG ON to www.pmmiintl.com
5
1147 Bellamy Rd. N., Suite 6
Scarborough, ON M1H 1H6
416.289.0588
888.283.7664

Protective Garment System Option Includes:
HOOD and JACKET with OVER PANTS or BIB OVERALLS
TM
U ltra Sof Constructio n
®
H a z a rd R is k C a t e g o ry - D ouble-Layer INDUR A t
2
A rc G e a r 2 5 c a l/c m - 3
AG25H Hood
• Replaceable tinted lens with
anti-fog coating
• Lens is extended 3” from face to
accommodate respiratory protection
and help minimize lens fogging
• Lens meets ANSI Z87.1
• Dielectric hard cap included
STOCK
AG25C-35 Jacket
• 35” length
• Military collar
• Covered zipper front closure;
storm flap with
VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG25P Over Pants
• NO pockets
• 4 way suspenders (included)
• Belt loops and suspender buttons
• Covered zipper fly with button at waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG25H Hood
• Replaceable tinted lens with anti-fog coating
• Lens is extended 3” from face to accommodate any need
for respiratory protection and helps minimize lens fog
• Lens meets ANSI Z87.1
• Dielectric hard cap included
AG25C-50 Coat
• 50” length
• Military collar
• Covered zipper front closure;
storm flap with VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG25C-55
• 55” length
AG25B Bib Overall
• Adjustable bib straps with fastex
buckles and elastic for comfort
• Reach-in pockets
• Covered zipper fly closure
• 2 button closures at side/waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 4XLarge
Protective Garment System
Option Includes:
HOOD and COAT
with LEGGINGS
NFPA 70E REQUIRES - ENTIRE BODY TO BE EQUALLY COVERED.
WITH HOOD AND LONG COAT OPTION, PROTECTIVE LEGGINGS MUST BE WORN.
AG25L Legging
• 19” length
• VELCRO® closure
• Pull tab for quick removal
6
SIZE:
LG = 16” - 18” Calf
XL = 18” - 20” Calf
2XL = 20” - 22” Calf
STOCK: LG

Protective Hood Options
• Replaceable tinted lens with anti-fog coating • Lens meets ANSI Z87.1 • Dielectric hard cap included
• Lens is extended 3” from face to accommodate any need for respiratory protection and helps minimize lens fog
80 cfm
Air Flow
Battery Operated
DETACHABLE cooling
system for comfort
and minimal lens fog
(Batteries Included)
Battery operated headlamp
attaches to front crown
of hood with VELCRO ®
(Batteries Included)
AG25H-A Hood with
Cooling System
AG25H-AL Hood with
Lamp & Cooling System
AG25H-L Hood with
Detachable Lamp
STOCK
Replaceable AG25LENS available with anti-fog coating for
AG25H , AG25H-A , AG25H-L , AG25H-AL style hoods
• Lens meets ANSI Z87.1
LENS Cleaning and Maintenance Instructions
Clean and inspect before and after use. Clean with a damp cloth
unless heavily soiled. Should further cleaning be required, clean
with mild soap and water, pat dry. Disassemble if required, for
cleaning or inspection.
AG-BAG Equipment Tote Bag
• 600 denier lightweight khaki Nylon
• Inner glove pocket with
VELCRO ® closure
• Water repellent
• Handling straps with snapped keeper
• Zipper closure
STOCK
WARNING : NFPA 70E Compliance requires wearing
of whole system (3 piece) as ONE UNIT.
WARNING : Once a garment has been exposed
to an arc flash, it must be removed from service.
SIZE
CHART
CHEST
SIZE
JACKETS & COATS
SM MD LG XL 2XL
(36/38) (40/42) (44/46) (48/50) (52/54)
SLEEVE
LENGTH
31 33 34 35 36
OPTIONAL LENGTHS
• Garment Length 35”, 50” and 55”
** Special Optional Sleeve Lengths CONTACT PMMI International
LIABILITY STATEMENT
DISCLAIMER OF WARRANTIES
These products are warranted only against defects in manufacture. Because
applications vary, no use warranty is implied or intended. The
Buyer should make a careful analysis of the use and purpose for which
these products are purchased. It will be the Buyer’s duty and responsibility
to determine whether these products will adequately protect the wearer
or user in the environment in which they are used.
There are no warranties which extend beyond the description on the face
hereof. Steel Grip, Inc., and the distributors of its products disclaim and
exclude all other warranties, whether implied or otherwise, and expressly
disclaim and exclude any warranties that might otherwise be implied,
including the implied warranties of merchantability and fitness for any
particular or intended use, purpose, or application. No oral representation
inconsistent with the above shall be binding to Steel Grip, Inc.
We certify that these goods are produced in compliance with all applicable
requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as
ammended and of regulations and orders of the United States Department of
Labor issued under Section 14 thereof.
SIZE
CHART
TO ASSIST YOU IN ORDERING COATS & LEGGINGS
Up to 6’ 2” in height
ORDER the 50” Length Coat & Leggings
OVER 6’ 2” and up to 6’5”
ORDER the 55” Length Coat & Leggings
OVER 6’5” - CONTACT PMMI International
WAIST
SIZE
OVER PANTS & BIB OVERALLS
(ORDER BY WAIST SIZE)
SM MD LG XL 2XL
(30/32) (34/36) (38/40) (42/44) (46/48)
Standard Inseam Fits 30” - 34” inseam
SPECIFY OPTIONAL INSEAM IF DESIRED
• Short Fits under 30” inseam
• Long Fits over 34” inseam
in
For further information LOG ON to www.pmmiintl.com
7
1147 Bellamy Rd. N., Suite 6
Scarborough, ON M1H 1H6
416.289.0588
888.283.7664

®
I IIA & KEVLA Constructio n
®
H a z a rd R is k C a t e g o ry - M ulti-Layer NOME X
R
2
A rc G e a r 4 0 c a l/c m - 4
Lightest Weight Suits Available in Today’s Market.
Protective Garment System Option Includes:
HOOD and JACKET with OVER PANTS or BIB OVERALLS
AG40H Hood
• Replaceable tinted lens with
anti-fog coating
• Lens is extended 3” from face to
accommodate respiratory protection
and help minimize lens fogging
• Lens meets ANSI Z87.1
• Dielectric hard cap included
STOCK
AG40C-35 Jacket
• 35” length
• Military collar
• Covered zipper front closure;
storm flap with
VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG40P Over Pants
• NO pockets
• 4 way suspenders (included)
• Belt loops and suspender buttons
• Covered zipper fly with button at waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
Protective Garment System
Option Includes:
HOOD and COAT with LEGGINGS
AG40H Hood
• Replaceable tinted lens with anti-fog coating
• Lens is extended 3” from face to accommodate any need
for respiratory protection and helps minimize lens fog
• Lens meets ANSI Z87.1
• Dielectric hard cap included
AG40C-50 Coat
• 50” length
• Military collar
• Covered zipper front closure;
storm flap with VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG40C-55
• 55” length
AG40B Bib Overall
• Adjustable bib straps with fastex
buckles and elastic for comfort
• Reach-in pockets
• Covered zipper fly closure
• 2 button closures at side/waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 4XLarge
STOCK: MD thru 2XL
NFPA 70E REQUIRES - ENTIRE BODY TO BE EQUALLY COVERED.
WITH HOOD AND LONG COAT OPTION, PROTECTIVE LEGGINGS MUST BE WORN.
AG40L Legging
• 19” length
• VELCRO® closure
• Pull tab for quick removal
8
SIZE:
LG = 16” - 18” Calf
XL = 18” - 20” Calf
2XL = 20” - 22” Calf
STOCK: LG

Protective Hood Options
• Replaceable tinted lens with anti-fog coating • Lens meets ANSI Z87.1 • Dielectric hard cap included
• Lens is extended 3” from face to accommodate any need for respiratory protection and helps minimize lens fog
80 cfm
Air Flow
STOCK
Battery Operated
DETACHABLE cooling
system for comfort
and minimal lens fog
(Batteries Included)
Battery operated headlamp
attaches to front crown
of hood with VELCRO ®
(Batteries Included)
AG40H-A Hood with
Cooling System
AG40H-AL Hood with
Lamp & Cooling System
AG40H-L Hood with
Detachable Lamp
STOCK
Replaceable AG40LENS available with anti-fog coating for
AG40H , AG40H-A , AG40H-L , AG40H-AL style hoods
• Lens meets ANSI Z87.1
LENS Cleaning and Maintenance Instructions
Clean and inspect before and after use. Clean with a damp cloth
unless heavily soiled. Should further cleaning be required, clean
with mild soap and water, pat dry. Disassemble if required, for
cleaning or inspection.
AG-BAG Equipment Tote Bag
• 600 denier lightweight khaki Nylon
• Inner glove pocket with
VELCRO ® closure
• Water repellent
• Handling straps with snapped keeper
• Zipper closure
STOCK
WARNING : NFPA 70E Compliance requires wearing
of whole system (3 piece) as ONE UNIT.
WARNING : Once a garment has been exposed
to an arc flash, it must be removed from service.
SIZE
CHART
CHEST
SIZE
JACKETS & COATS
SM MD LG XL 2XL
(36/38) (40/42) (44/46) (48/50) (52/54)
SLEEVE
LENGTH
31 33 34 35 36
OPTIONAL LENGTHS
• Garment Length 35”, 50” and 55”
** Special Optional Sleeve Lengths CONTACT PMMI International
LIABILITY STATEMENT
DISCLAIMER OF WARRANTIES
These products are warranted only against defects in manufacture. Because
applications vary, no use warranty is implied or intended. The
Buyer should make a careful analysis of the use and purpose for which
these products are purchased. It will be the Buyer’s duty and responsibility
to determine whether these products will adequately protect the wearer
or user in the environment in which they are used.
There are no warranties which extend beyond the description on the face
hereof. Steel Grip, Inc., and the distributors of its products disclaim and
exclude all other warranties, whether implied or otherwise, and expressly
disclaim and exclude any warranties that might otherwise be implied,
including the implied warranties of merchantability and fitness for any
particular or intended use, purpose, or application. No oral representation
inconsistent with the above shall be binding to Steel Grip, Inc.
We certify that these goods are produced in compliance with all applicable
requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as
ammended and of regulations and orders of the United States Department of
Labor issued under Section 14 thereof.
SIZE
CHART
TO ASSIST YOU IN ORDERING COATS & LEGGINGS
Up to 6’ 2” in height
ORDER the 50” Length Coat & Leggings
OVER 6’ 2” and up to 6’5”
ORDER the 55” Length Coat & Leggings
OVER 6’5” - CONTACT PMMI International
WAIST
SIZE
OVER PANTS & BIB OVERALLS
(ORDER BY WAIST SIZE)
SM MD LG XL 2XL
(30/32) (34/36) (38/40) (42/44) (46/48)
Standard Inseam Fits 30” - 34” inseam
SPECIFY OPTIONAL INSEAM IF DESIRED
• Short Fits under 30” inseam
• Long Fits over 34” inseam
1147 Bellamy Rd. N., Suite 6
Scarborough, ON M1H 1H6
416.289.0588
888.283.7664
For further information LOG ON to www.pmmiintl.com
9

Protective Garment System Option Includes:
HOOD and JACKET with OVER PANTS or BIB OVERALLS
AGW40H Hood
• Replaceable tinted lens with
anti-fog coating
• Lens meets ANSI Z87.1
• Dielectric hard cap included
STOCK
®
D ouble-Layer INDUR Ultra Soft TM
- HRC4 - A rc G e a r -
A
4
2
c a l/c m
0
AGW40C-35 Jacket
• 35” length
• Military collar
• Covered zipper front closure;
storm flap with
VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AGW40P Over Pants
• NO pockets
• 4 way suspenders (included)
• Belt loops and suspender buttons
• Covered zipper fly with button at waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
Protective Garment System
Option Includes:
HOOD and COAT with LEGGINGS
AGW40H Hood
• Replaceable tinted lens with anti-fog coating
• Lens is extended 3” from face to accommodate any need
for respiratory protection and helps minimize lens fog
• Lens meets ANSI Z87.1
• Dielectric hard cap included
AGW40C-50 Coat
• 50” length
• Military collar
• Covered zipper front closure;
storm flap with VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AGW40C-55
• 55” length
AGW40B Bib Overall
• Adjustable bib straps with fastex
buckles and elastic for comfort
• Reach-in pockets
• Covered zipper fly closure
• 2 button closures at side/waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 4XLarge
STOCK: MD thru 2XL
NFPA 70E REQUIRES - ENTIRE BODY TO BE EQUALLY COVERED.
WITH HOOD AND LONG COAT OPTION, PROTECTIVE LEGGINGS MUST BE WORN.
AGW40L Legging
• 19” length
• VELCRO® closure
• Pull tab for quick removal
10
SIZE:
LG = 16” - 18” Calf
XL = 18” - 20” Calf
2XL = 20” - 22” Calf
STOCK: LG

Protective Hood Options
• Replaceable tinted lens with anti-fog coating • Lens meets ANSI Z87.1 • Dielectric hard cap included
80 cfm
Hood may be used WITH
or WITHOUT the
cooling system
Air Flow
STOCK
AGW40H-A Hood with
Cooling System
Patented Cooling System
battery powered
(8 ‘AA’ batteries included)
produces 80 cfm of air, for
comfort in hot environments,
decreases fogging of lens
U.S.
Patent
Confirmed
#7,357,135
AGW40H-AL Hood with
Lamp & Cooling System
Battery operated headlamp
attaches to front crown
of hood with VELCRO ®
(Batteries Included)
AGW40H-L Hood with
Detachable Lamp
STOCK
Replaceable AGW40LENS available with anti-fog coating for
AGW40H , AGW40H-A , AGW40H-L , AGW40H-AL style hoods
• Lens meets ANSI Z87.1
LENS Cleaning and Maintenance Instructions
Clean and inspect before and after use. Clean with a damp cloth
unless heavily soiled. Should further cleaning be required, clean
with mild soap and water, pat dry. Disassemble if required, for
cleaning or inspection.
AG-BAG Equipment Tote Bag
• 600 denier lightweight khaki Nylon
• Inner glove pocket with
VELCRO ® closure
• Water repellent
• Handling straps with snapped keeper
• Zipper closure
STOCK
WARNING : NFPA 70E Compliance requires wearing
of whole system (3 piece) as ONE UNIT.
WARNING : Once a garment has been exposed
to an arc flash, it must be removed from service.
SIZE
CHART
CHEST
SIZE
JACKETS & COATS
SM MD LG XL 2XL
(36/38) (40/42) (44/46) (48/50) (52/54)
SLEEVE
LENGTH
31 33 34 35 36
OPTIONAL LENGTHS
• Garment Length 35”, 50” and 55”
** Special Optional Sleeve Lengths CONTACT STEEL GRIP
LIABILITY STATEMENT
DISCLAIMER OF WARRANTIES
These products are warranted only against defects in manufacture. Because
applications vary, no use warranty is implied or intended. The
Buyer should make a careful analysis of the use and purpose for which
these products are purchased. It will be the Buyer’s duty and responsibility
to determine whether these products will adequately protect the wearer
or user in the environment in which they are used.
There are no warranties which extend beyond the description on the face
hereof. Steel Grip, Inc., and the distributors of its products disclaim and
exclude all other warranties, whether implied or otherwise, and expressly
disclaim and exclude any warranties that might otherwise be implied,
including the implied warranties of merchantability and fitness for any
particular or intended use, purpose, or application. No oral representation
inconsistent with the above shall be binding to Steel Grip, Inc.
We certify that these goods are produced in compliance with all applicable
requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as
ammended and of regulations and orders of the United States Department of
Labor issued under Section 14 thereof.
SIZE
CHART
TO ASSIST YOU IN ORDERING COATS & LEGGINGS
Up to 6’ 2” in height
ORDER the 50” Length Coat & Leggings
OVER 6’ 2” and up to 6’5”
ORDER the 55” Length Coat & Leggings
OVER 6’5” - CONTACT STEEL GRIP
WAIST
SIZE
OVER PANTS & BIB OVERALLS
(ORDER BY WAIST SIZE)
SM MD LG XL 2XL
(30/32) (34/36) (38/40) (42/44) (46/48)
Standard Inseam Fits 30” - 34” inseam
SPECIFY OPTIONAL INSEAM IF DESIRED
• Short Fits under 30” inseam
• Long Fits over 34” inseam
P .O. Box 747
Email: steelgrip@steelgripinc.com
Danville,
IL 61834
Web: www.steelgripinc.com
Tel: 1-800-223-1595
700 Garfield
Fax: 1-800-270-0517
Danville, IL 61832
11

Protective Garment System Option Includes:
HOOD and JACKET with OVER PANTS or BIB OVERALLS
TM
U ltra Sof Constructio n
®
H a z a rd R is k C a t e g o ry - D ouble-Layer INDUR A t
2
A rc G e a r 5 0 c a l/c m - 4
AG50H Hood
• Replaceable tinted lens with
anti-fog coating
• Lens is extended 3” from face to
accommodate respiratory protection
and help minimize lens fogging
• Lens meets ANSI Z87.1
• Dielectric hard cap included
STOCK
AG50C-35 Jacket
• 35” length
• Military collar
• Covered zipper front closure;
storm flap with
VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG50P Over Pants
• NO pockets
• 4 way suspenders (included)
• Belt loops and suspender buttons
• Covered zipper fly with button at waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
Protective Garment System
Option Includes:
HOOD and COAT
AG50H Hood
• Replaceable tinted lens with anti-fog coating
• Lens is extended 3” from face to accommodate any need
for respiratory protection and helps minimize lens fog
• Lens meets ANSI Z87.1
• Dielectric hard cap included
AG50C-50 Coat
• 50” length
• Military collar
• Covered zipper front closure;
storm flap with VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG50C-55
• 55” length
AG50B Bib Overall
• Adjustable bib straps with fastex
buckles and elastic for comfort
• Reach-in pockets
• Covered zipper fly closure
• 2 button closures at side/waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 4XLarge
STOCK: MD thru 2XL
with LEGGINGS
NFPA 70E REQUIRES - ENTIRE BODY TO BE EQUALLY COVERED.
WITH HOOD AND LONG COAT OPTION, PROTECTIVE LEGGINGS MUST BE WORN.
AG50L Legging
• 19” length
• VELCRO® closure
• Pull tab for quick removal
12
SIZE:
LG = 16” - 18” Calf
XL = 18” - 20” Calf
2XL = 20” - 22” Calf
STOCK: LG

Protective Hood Options
• Replaceable tinted lens with anti-fog coating • Lens meets ANSI Z87.1 • Dielectric hard cap included
• Lens is extended 3” from face to accommodate any need for respiratory protection and helps minimize lens fog
80 cfm
Air Flow
STOCK
Battery Operated
DETACHABLE cooling
system for comfort
and minimal lens fog
(Batteries Included)
Battery operated headlamp
attaches to front crown
of hood with VELCRO ®
(Batteries Included)
AG50H-A Hood with
Cooling System
AG50H-AL Hood with
Lamp & Cooling System
AG50H-L Hood with
Detachable Lamp
STOCK
Replaceable AG50LENS available with anti-fog coating for
AG50H , AG50H-A , AG50H-L , AG50H-AL style hoods
• Lens meets ANSI Z87.1
LENS Cleaning and Maintenance Instructions
Clean and inspect before and after use. Clean with a damp cloth
unless heavily soiled. Should further cleaning be required, clean
with mild soap and water, pat dry. Disassemble if required, for
cleaning or inspection.
AG-BAG Equipment Tote Bag
• 600 denier lightweight khaki Nylon
• Inner glove pocket with
VELCRO ® closure
• Water repellent
• Handling straps with snapped keeper
• Zipper closure
STOCK
WARNING : NFPA 70E Compliance requires wearing
of whole system (3 piece) as ONE UNIT.
WARNING : Once a garment has been exposed
to an arc flash, it must be removed from service.
SIZE
CHART
CHEST
SIZE
JACKETS & COATS
SM MD LG XL 2XL
(36/38) (40/42) (44/46) (48/50) (52/54)
SLEEVE
LENGTH
31 33 34 35 36
OPTIONAL LENGTHS
• Garment Length 35”, 50” and 55”
** Special Optional Sleeve Lengths CONTACT PMMI International
LIABILITY STATEMENT
DISCLAIMER OF WARRANTIES
These products are warranted only against defects in manufacture. Because
applications vary, no use warranty is implied or intended. The
Buyer should make a careful analysis of the use and purpose for which
these products are purchased. It will be the Buyer’s duty and responsibility
to determine whether these products will adequately protect the wearer
or user in the environment in which they are used.
There are no warranties which extend beyond the description on the face
hereof. Steel Grip, Inc., and the distributors of its products disclaim and
exclude all other warranties, whether implied or otherwise, and expressly
disclaim and exclude any warranties that might otherwise be implied,
including the implied warranties of merchantability and fitness for any
particular or intended use, purpose, or application. No oral representation
inconsistent with the above shall be binding to Steel Grip, Inc.
We certify that these goods are produced in compliance with all applicable
requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as
ammended and of regulations and orders of the United States Department of
Labor issued under Section 14 thereof.
SIZE
CHART
TO ASSIST YOU IN ORDERING COATS & LEGGINGS
Up to 6’ 2” in height
ORDER the 50” Length Coat & Leggings
OVER 6’ 2” and up to 6’5”
ORDER the 55” Length Coat & Leggings
OVER 6’5” - CONTACT PMMI International
WAIST
SIZE
OVER PANTS & BIB OVERALLS
(ORDER BY WAIST SIZE)
SM MD LG XL 2XL
(30/32) (34/36) (38/40) (42/44) (46/48)
Standard Inseam Fits 30” - 34” inseam
SPECIFY OPTIONAL INSEAM IF DESIRED
• Short Fits under 30” inseam
• Long Fits over 34” inseam
For further information LOG ON to www.pmmiintl.com
13
1147 Bellamy Rd. N., Suite 6
Scarborough, ON M1H 1H6
416.289.0588
888.283.7664

Protective Garment System Option Includes:
HOOD and JACKET with OVER PANTS or BIB OVERALLS
®
& NOME IIIA Constructio n
®
H a z a rd R is k C a t e g o ry - M ulti-Layer KEVLA R X
2
A rc G e a r 6 5 c a l/c m - 4
AG65H Hood
• Replaceable tinted lens with
anti-fog coating
• Lens is extended 3” from face to
accommodate respiratory protection
and help minimize lens fogging
• Lens meets ANSI Z87.1
• Dielectric hard cap included
STOCK
AG65C-35 Jacket
• 35” length
• Military collar
• Covered zipper front closure;
storm flap with
VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG65P Over Pants
• NO pockets
• 4 way suspenders (included)
• Belt loops and suspender buttons
• Covered zipper fly with button at waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
Protective Garment System
Option Includes:
HOOD and COAT with LEGGINGS
AG65B Bib Overall
• Adjustable bib straps with fastex
buckles and elastic for comfort
• Reach-in pockets
• Covered zipper fly closure
• 2 button closures at side/waist
• Zipper leg openings with
expandable gore
• SIZE: Small thru 4XLarge
STOCK: MD thru 2XL
NFPA 70E REQUIRES - ENTIRE BODY TO BE EQUALLY COVERED.
WITH HOOD AND LONG COAT OPTION, PROTECTIVE LEGGINGS MUST BE WORN.
AG65H Hood
• Replaceable tinted lens with anti-fog coating
• Lens is extended 3” from face to accommodate any need
for respiratory protection and helps minimize lens fog
• Lens meets ANSI Z87.1
• Dielectric hard cap included
AG65C-50 Coat
• 50” length
• Military collar
• Covered zipper front closure;
storm flap with VELCRO® closure
• NOMEX® wristlets
• SIZE: Small thru 6XLarge
STOCK: MD thru 2XL
AG65C-55
• 55” length
SIZE:
LG = 16” - 18” Calf
XL = 18” - 20” Calf
2XL = 20” - 22” Calf
STOCK: LG
AG65L Legging
• 19” length
• VELCRO® closure
• Pull tab for quick removal
14

Protective Hood Options
• Replaceable tinted lens with anti-fog coating • Lens meets ANSI Z87.1 • Dielectric hard cap included
• Lens is extended 3” from face to accommodate any need for respiratory protection and helps minimize lens fog
80 cfm
Air Flow
STOCK
Battery Operated
DETACHABLE cooling
system for comfort
and minimal lens fog
(Batteries Included)
Battery operated headlamp
attaches to front crown
of hood with VELCRO ®
(Batteries Included)
AG65H-A Hood with
Cooling System
AG65H-AL Hood with
Lamp & Cooling System
AG65H-L Hood with
Detachable Lamp
STOCK
Replaceable AG65LENS available with anti-fog coating for
AG65H , AG65H-A , AG65H-L , AG65H-AL style hoods
• Lens meets ANSI Z87.1
LENS Cleaning and Maintenance Instructions
Clean and inspect before and after use. Clean with a damp cloth
unless heavily soiled. Should further cleaning be required, clean
with mild soap and water, pat dry. Disassemble if required, for
cleaning or inspection.
AG-BAG Equipment Tote Bag
• 600 denier lightweight khaki Nylon
• Inner glove pocket with
VELCRO ® closure
• Water repellent
• Handling straps with snapped keeper
• Zipper closure
STOCK
WARNING : NFPA 70E Compliance requires wearing
of whole system (3 piece) as ONE UNIT.
WARNING : Once a garment has been exposed
to an arc flash, it must be removed from service.
SIZE
CHART
CHEST
SIZE
JACKETS & COATS
SM MD LG XL 2XL
(36/38) (40/42) (44/46) (48/50) (52/54)
SLEEVE
LENGTH
31 33 34 35 36
OPTIONAL LENGTHS
• Garment Length 35”, 50” and 55”
** Special Optional Sleeve Lengths CONTACT PMMI International
LIABILITY STATEMENT
DISCLAIMER OF WARRANTIES
These products are warranted only against defects in manufacture. Because
applications vary, no use warranty is implied or intended. The
Buyer should make a careful analysis of the use and purpose for which
these products are purchased. It will be the Buyer’s duty and responsibility
to determine whether these products will adequately protect the wearer
or user in the environment in which they are used.
There are no warranties which extend beyond the description on the face
hereof. Steel Grip, Inc., and the distributors of its products disclaim and
exclude all other warranties, whether implied or otherwise, and expressly
disclaim and exclude any warranties that might otherwise be implied,
including the implied warranties of merchantability and fitness for any
particular or intended use, purpose, or application. No oral representation
inconsistent with the above shall be binding to Steel Grip, Inc.
We certify that these goods are produced in compliance with all applicable
requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as
ammended and of regulations and orders of the United States Department of
Labor issued under Section 14 thereof.
SIZE
CHART
TO ASSIST YOU IN ORDERING COATS & LEGGINGS
Up to 6’ 2” in height
ORDER the 50” Length Coat & Leggings
OVER 6’ 2” and up to 6’5”
ORDER the 55” Length Coat & Leggings
OVER 6’5” - CONTACT PMMI International
WAIST
SIZE
OVER PANTS & BIB OVERALLS
(ORDER BY WAIST SIZE)
SM MD LG XL 2XL
(30/32) (34/36) (38/40) (42/44) (46/48)
Standard Inseam Fits 30” - 34” inseam
SPECIFY OPTIONAL INSEAM IF DESIRED
• Short Fits under 30” inseam
• Long Fits over 34” inseam
For further information LOG ON to www.pmmiintl.com
15
1147 Bellamy Rd. N., Suite 6
Scarborough, ON M1H 1H6
416.289.0588
888.283.7664

FR Knits & Fleeces
FR Knits & Fleeces
C54 Knit Shirt - Classic T
FR knit shirts are available in a variety of colours.
Durable FR ribbed collars are standard.
Our best-selling classic T-shirt features:
* Your choice of long or short sleeves
* A variety of colours to choose from
* One left breast pocket
* Available in SM-5X
All PMMI FR knits feature:
* Breathable knits to keep you comfortable
* Generous sizing
* Comfortable single needle tape trims the neck seam
Choose from the following fabrics and colours:
6.5 oz. Indura® Ultra Soft® (arc rating = 10.9 cal/cm2)
Item Material
C54 LS Indura® Ultra Soft® Long Sleeve
C54 SS Indura® Ultra Soft® Short Sleeve
Colour:
(GR) gray, (NV) navy, (MB) medium blue, (OR) orange
C54 Knit Shirt - Henley Shirt
FR knit shirts are available in a variety of colours.
Durable FR ribbed collars are standard.
This comfortable, casual henley shirt features:
* Long sleeves
* A variety of colours to choose from
* One left breast pocket
* Crew-neck henley styling
* Three button neck placket
* Available in SM-5X
All PMMI FR knits feature:
* Breathable knits to keep you comfortable
* Generous sizing
* Comfortable single needle tape trims the neck seam
Fabric and colours:
6.5 oz. Indura® Ultra Soft® (arc rating = 10.9 cal/cm2)
Item Material
C54 BSLS Indura® Ultra Soft® Henley shirt
Colour:
(NV) navy, (GR) gray, (OR) orange
C54 Knit Shirt - Polo Shirt
FR knit shirts are available in a variety of colours.
Durable FR ribbed collars are standard.
This distinguishing, collared polo shirt features:
* Long sleeves
* A variety of colours to choose from
* One left breast pocket
* Two-button neck placket
* Some polos offered with contrasting navy collar
* Available in SM-5X
All PMMI FR knits feature:
* Breathable knits to keep you comfortable
* Generous sizing
* Comfortable single needle tape trims the neck seam
Choose from the following fabrics and colours:
6.5 oz. Indura® Ultra Soft® (arc rating = 10.9 cal/cm2)
Item Material
C54 PSLSSC Indura® Ultra Soft® Polo Style Shirt Long Sleeve
Colour:
(NV) navy, (GR) gray, (OR) orange
FR SHIRT SIZE CHART (Applies to all shirt sizes)
SIZE: SM MD LG XL 2X 3X 4X 5X
CHEST: 34/36 38/40 42/44 46/48 50/52 54/56 58/60 62/64
Available in regular and tall sizes
PMMI Your source for ArcGear and other fine PPE in Canada. TOLL FREE: 888-283-7664 / www. pmmiintl.com
16

FR Knits & Fleeces
C54 Knit Shirt - Turtlenecks
FR knit shirts are available in a variety of colours
in smooth FR interlock knits.
Durable FR ribbed collars are standard.
Our Turtleneck-shirt features:
* Your choice of long or short sleeves
* A variety of colours to choose from
* One left breast pocket
* Available in SM-5X
All PMMI FR knits feature:
* Breathable knits to keep you comfortable
* Generous sizing
* Comfortable single needle tape trims the neck seam
Choose from the following fabrics and colours:
6.5 oz. Indura® Ultra Soft® (arc rating = 10.9 cal/cm2)
Item Material
C54TN Indura® Ultra Soft® Mock Turtleneck
C54TNL Indura® Ultra Soft® Long Turtleneck
Colour:
(NV) navy, (GR) gray, (OR) orange
C20 FR Hooded Fleece Sweatshirt
This classic fleece sweatshirt is available in a variety of
styles and colours to suit your needs:
This distinguishing, sweatshirt features:
* Available in hooded pullover or hooded with zipper styles
All hooded sweatshirts have two front slash pockets
Hooded sweatshirt with zipper has plastic Vision® zipper
(with FR tape)
* Long sleeves
* A variety of colours to choose from
* Available in SM-5X
All PMMI FR knits feature:
* Breathable knits to keep you comfortable
* Generous sizing
* Comfortable single needle tape trims the neck seam
Choose from the following fabrics and colours:
14 oz. FR EMC Fleece in Navy (arc rating =25 cal/cm2)
11 oz. FR Indura Ultra Soft Fleece Hood Sweatshirt in Navy or Orange
(arc rating =21cal/cm2)
Item Number
C20WT03 Indura® Ultra Soft® Pullover (11 oz.) 21 cal/cm2
C20WT05 Indura® Ultra Soft® w/zipper (11 oz.) 21 cal/cm2
C20IF03
EMC Fleece Pullover (14 oz.) 27 cal/cm2
C20IF05
EMC Fleece w/zipper (14 oz.) 27 cal/cm2
Colour:
Indura® Ultra Soft® (NV) navy, (OR) orange
EMC Fleece (NV) navy only
C21 FR Hooded Fleece Sweatshirt
This classic fleece sweatshirt is available in a variety of
styles and colours to suit your needs:
This distinguishing, sweatshirt features:
* Hood fits over hardhat
* Available in hooded pullover or hooded with zipper styles
All hooded sweatshirts have two front slash pockets
Hooded sweatshirt with zipper has plastic Vision® zipper
(with FR tape)
* Long sleeves
* A variety of colours to choose from
* Available in SM-5X
All PMMI FR knits feature:
* Breathable knits to keep you comfortable
* Generous sizing
* Comfortable single needle tape trims the neck seam
Choose from the following fabrics and colors:
14 oz. FR EMC Fleece in Navy (arc rating =25 cal/cm2)
11 oz. FR Indura Ultra Soft Fleece Hood Sweatshirt in Navy or Orange
(arc rating =21cal/cm2)
Item Number
C21 WT03 Indura® Ultra Soft® Fleece Hooded pullover sweatshirt 21 cal/cm2
C21 WT05 Indura® Ultra Soft® Fleece Hooded sweatshirt w/zipper 21 cal/cm2
C21 IF03
EMC Fleece Pullover 25 cal/cm2
C21 IF05
EMC Fleece w/zipper 25 cal/cm2
Colour:
Indura® Ultra Soft® (NV) navy, (OR) orange
EMC Fleece (NV) navy only
FR SHIRT SIZE CHART (Applies to all shirt sizes)
SIZE: SM MD LG XL 2X 3X 4X 5X
CHEST: 34/36 38/40 42/44 46/48 50/52 54/56 58/60 62/64
Available in regular and tall sizes
PMMI Your source for ArcGear and other fine PPE in Canada. TOLL FREE: 888-283-7664 / www. pmmiintl.com
17

Category 2 Arc Flash Kits
ONE STOP SHOPPING FOR YOUR ARC FLASH PROTECTION NEEDS.
8 cal/ cm 2 arc flash kits
PART COVERALLS CLASS 0 PART COVERALLS CLASS 0 PART COVERALLS CLASS 0
NUMBER CHEST SIZE GLOVE SIZE NUMBER CHEST SIZE GLOVE SIZE NUMBER CHEST SIZE GLOVE SIZE
M8C09KIT M (42) 9 L8C09KIT L (46) 9 XL8C09KIT XL (50) 9
M8C10KIT 10 L8C10KIT 10 XL8C10KIT 10
M8C11KIT 11 L8C11KIT 11 XL8C11KIT 11
M8C12KIT 12 L8C12KIT 12 XL8C12KIT 12
8 cal/cm 2 Arc Flash Kits
8 cal/cm 2 Arc Flash Kits
Kit includes:
8 cal/cm 2 coveralls, class 0 glove kit complete with leather outers and carrying bag, 10 cal/ cm 2 face shield with Class E hard hat
and protective bag.
PMMI International Ltd. - Toll Free: 888.283.7664 / Local: 416.289.0588 - www.pmmiintl.com
18

Category 2 Arc Flash Kits
ONE STOP SHOPPING FOR YOUR ARC FLASH PROTECTION NEEDS.
12 cal/ cm 2 Kits
PART COVERALLS CLASS 0 PART COVERALLS CLASS 0 PART COVERALLS CLASS 0
NUMBER CHEST SIZE GLOVE SIZE NUMBER CHEST SIZE GLOVE SIZE NUMBER CHEST SIZE GLOVE SIZE
M12C09KIT M (42) 9 L12C09KIT L (46) 9 XL12C09KIT XL (50)9
M12C10KIT 10 L12C10KIT 10 XL12C10KIT 10
M12C11KIT 11 L12C11KIT 11 XL12C11KIT 11
M12C12KIT 12 L12C12KIT 12 XL12C12KIT 12
12 cal/cm 2 Arc Flash Kits
with Carbonex 12 cal/cm 2 stretch knit balaclava
Kit includes:
12 cal/ cm 2 coveralls, class 0 glove kit complete with leather outers and carrying bag, 10 cal/ cm 2 face shield with Class E hard
hat and protective bag, and Carbonex 12 cal/cm 2 stretch knit balaclava.
12 cal/cm 2 Arc Flash Kits
PMMI International Ltd. - Toll Free: 888.283.7664 / Local: 416.289.0588 - www.pmmiintl.com
19

Category 4 Protection at a great price
ALL IN AN EASY TO ORDER KIT.
40 cal/ cm 2 Arc Flash Suit Kit
Part Number Suit Size Glove Size
40KITM9 M 9
40KITM10 M 10
40KITM11 M 11
40KITL9 L 9
40KITL10 L 10
40KITL11 L 11
40KITXL9 XL 9
40KITXL10 XL 10
40KITXL11 XL 11
40KIT2XL9 2XL 9
40KIT2XL10 2XL 10
40KIT2XL11 2XL 11
Arc Flash
Suit Kit
40 cal/ cm 2
Arc Flash Suit Kits 40 cal/cm 2
Kit includes:
40 cal Indura Ultrasoft 35” jacket, overpants, hood, and Class 1 glove kit, (gloves, leather outers and carry bag) all contained in an
Arc Gear carry bag.
PMMI International Ltd. - Toll Free: 888.283.7664 / Local: 416.289.0588 - www.pmmiintl.com
20

Warranty on Arc Flash Gear
ARC FLASH GEAR.
ARC GEAR is warranted to be free of manufacturer’s defects upon delivery. Because applications vary, no use
warranty is implied or intended. The buyer should make a careful analysis of the use and purpose for which
these products are purchased. It will be the buyer’s duty and responsibility to determine whether these products
will adequately protect the wearer or user in the environment in which they are used. There are no warranties
that extend beyond the description on the face hereof. Steel Grip Inc. and PMMI International Ltd. disclaim
and exclude all other warranties, whether implied or otherwise, and expressly disclaim and exclude any
warranties that might otherwise be implied, including the implied warranties of merchantability and fitness for
any particular of intended use, purpose or application. No oral representation inconsistent with the above
shall be binding to Steel Grip Inc. or PMM International Ltd.
Secondary Workwear Pants
Chest
Available options
36”- 48” ----- SHORT +5%
50”- 56” +10% LONG +5%
58”- 64” +20% TALL +5%
66” & UP +50% See explanation below
Secondary Workwear Coveralls
WAIST Inseam—standard is 32”
24”-44” ---- 28” -34” ----
46” – 52” +10% 36” +5%
54” – 58” +20%
60” & up +50%
Secondary Workwear Shirts
Chest
Available Options
S-XL --- SHORT* +5%
2X- 3X +10% LONG* +5%
4X-5X +20% TALL* +5%
6X and up +50% See explanation below
Arc Flash Coats- all calorie ratings
Chest
Available Options
S-XL ---- Sleeve length +5%
2X-3X +10%
4X-5X +20%
6X and up +50%
Arc Flash overpants and Bib Overalls—all calorie ratings
Chest
Available Options
S-XL ---- SHORT +5%
2X-3X +10% LONG +5%
4X-5X +20%
6X and up +50%
ALWAYS CHECK STEEL GRIP SIZING CHARTS FOUND ON THE LITERATURE TO ENSURE PROPER FIT.
Short= -2” sleeve length, - 1 1/2” tail length Long= + 2” sleeve length, + 1 1/2” tail length Tall= 3” tail length only

NEW
Double Colour
Gloves
Electrician’s Gloves
Double Colour Gloves
Our new Class 1 and 2 double colour gloves meet the most stringent safety
and design demands of utilities and high voltage workers.
Available in Black with Orange interior only.
Class 1 gloves- UP TO 7500 VAC
Part # Description Kit part #
C17DC 36 cm/ 14" length SIZE 7 C17DCK
C18DC 36 cm/ 14" length SIZE 8 C18DCK
C19DC 36 cm/ 14" length SIZE 9 C19DCK
C110DC 36 cm/ 14" length SIZE 10 C110DCK
C111DC 36 cm/ 14" length SIZE11 C11DC1K
Class 2 gloves- UP TO 17000 VAC
Part # Description Kit part #
C27DC 36 cm/ 14" length SIZE 7 C27DCK
C28DC 36 cm/ 14" length SIZE 8 C28DCK
C29DC 36 cm/ 14" length SIZE 9 C29DCK
C210DC 36 cm/ 14"' length SIZE 10 C210DCK
C211DC 36 cm/ 14" length SIZE11 C211DCK
PMMI Your source for ArcGear and other fine PPE in Canada
22

Glove Kits
Glove Kits
Kit includes:
one pair of gloves, leather outers, and a storage bag.
CLASS 00 KITS - shipped with low voltage leather outers. CLASS 0 KITS - shipped with low voltage leather outers
Description Size 9 Size 10 Size 11
27 cm/ 10.5” length C009K C0010K C0011K
36cm/ 14” length CL009K CL0010K CL0011K
Description Size 9 Size 10 Size 11
27cm/ 10.5” length C09K C010K C011K
36 cm/ 14” length CL09K CL010K CL011K
Class 0 Gloves available in ORANGE and BLACK.
Glove Kits
Kit includes:
one pair of gloves, leather outers, and a storage bag.
CLASS 1 KITS (includes full cuff heavy duty leather outers)
Description Size 9 Size 10 Size 11
36 cm/ 14” length C19K C110K C111K
42 cm/ 16” length CL19K CL110K CL111K
CLASS 2 KITS (includes full cuff heavy duty leather outers)
Description Size 9 Size 10 Size 11
36 cm/ 14” length C29K C210K C211K
42 cm/ 16” length CL29K CL210K CL211K
CLASS 3 KITS (includes full cuff heavy duty leather outers)
Description Size 9 Size 10 Size 11
36 cm/ 14” length C39K C310K C311K
42 cm/ 16” length CL39K CL310K CL311K
High Voltage Glove Kits
PMMI International Ltd. - Toll Free: 888.283.7664 / Local: 416.289.0588 - www.pmmiintl.com
23

INSULATED SAFETY-TOOLS – PERSONAL
PROTECTIVE EQUIPMENT
Insulation
Cimco Safety Line tools feature two colour insulation for maximum safety.
Damaging the outer red layer will expose the orange layer indicting that
the tool is not properly insulated.
Non-Slip protection
Protection against hands slipping towards
live parts
Testing
All tools are routinely tested according to
IEC60900-2004 with 10,000 V testing voltage.
24

cables 1,5 mm 2 and 2,5 mm 2 160 mm (6“) 1 10 9652
– Safety pliers with 1,000 volt protective insulation
Smooth movement and ergonomically designed handles make CIMCO the choice of professionals all over the world.
All tools feature tool steel alloys hardened in oil. All edges are induction hardened and finished in highly polished
chrome plating. Our two colour insulation provides excellent non-slip protection even when wet or dirty. It is also
impervious to extreme temperatures, vibration, sweat, salt water, oil and most chemicals.
10 years durability-warranty
Every Safety Line tool carries a 10 year warranty against defects in materials or workmanship. See your CIMCO
dealer for details.
1.000 Volt-protective insulation according to VDE
Safety Line series tools meet all criteria for IEC900, IEC60900:2004 and VDE 0682/part 201. Ten different quality
checks are made on the insulation on these tools and all pliers are tested individually for for blow out and flashover
in a water bath with a test voltage of 10,000 V.
Our two colour insulation provides excellent nonslip protection even when wet or dirty.
It is also impervious to extreme temperatures, vibration, sweat, salt water, oil and
many chemicals.
1000 V heavy duty diagonal cutter
DIN ISO 5749, with stepped precision edge, for hardened steel wire (piano wire),
hard wire and semi-hard wire
145 mm (5,5“) 6 10 9524
170 mm (6,5“) 6 10 9526
200 mm (8“) 6 10 9528
1000 V diagonal cutter
DIN ISO 5749, for soft and hard wire, precision edges with facets
not VDE-certified 1.000 V-protective insul. 130 mm (5“) 6 10 9570
145 mm (5,5“) 6 10 9572
160 mm (6“) 6 10 9574
1000 V wirestripper-side cutter
precision blades with facets, length of edges 12 mm, for hard wire up to 1,8 mm diameter, semi-hard wire up
to 2,5 mm diameter and soft wire up to 4 mm diameter, Two stripping positions for large and multiwire
1000 V sealing plier-cutter
for stamps 8 mm diameter ø
not VDE-certified 1.000 V-protective insul. 160 mm (6“) 1 10 9730
loose stamps 8 mm ø
10 1732
1000 V heavy duty end cutter
DIN ISO 5748, length of edges 23 mm, for hardened steel wire (piano wire) up to 1,8 mm diameter,
hard wire up to 2,5 mm diameter and semi-hard wire up to 3 mm diameter, weight 250 g
160 mm (6“) 6 10 9402
25

1000 V combination pliers
DIN ISO 5746, strong, short jaws with facets and groove, serrated gripping surfaces, with protruding blades
for flush cutting, for hard and semi-hard wire
160 mm (6“) 6 10 9334
185 mm (7“) 6 10 9336
200 mm (8“) 6 10 9338
1000 V wire stripper
for large and multiwire cables up to 5 mm diameter
with set screw adjustment
160 mm (6“) 6 10 9686
1000 V needle nose pliers
DIN ISO 5745, long, serrated gripping surfaces, with blades
for semi-hard and soft wire
145 mm (5,5“) 6 10 9212
160 mm (6“) 6 10 9214
200 mm (8“) 6 10 9216
1000 V needle nose pliers with bent jaws
DIN ISO 5745, long, jaws 45° angled, serrated gripping surfaces,
with blades for semi-hard and soft wire
160 mm (6“) 6 10 9236
200 mm (8“) 6 10 9238
1000 V flat nose pliers
DIN ISO 5745, flat jaws, length of jaws 50 mm, smooth gripping surfaces,
weight 160 g
160 mm (6“) 6 10 9024
1000 V round nose pliers
DIN ISO 5745, long, round jaws, length of jaws 50 mm, smooth gripping surfaces,
weight 140 g
160 mm (6“) 6 10 9062
1000 V pliers assortment
heavy duty diagonal cutter 200 mm (8“) 10 9528
flat round nose pliers with straight jaws
combination pliers
200 mm
185 mm
(8“)
(7“)
10 9216
10 9336
wire stripper
160 mm (6“)
10 9686
1 10 9000
Cimco pliers feature two colour insulation for maximum safety.
Damaging the outer red insulation layer will expose the orange
layer, indicating that the tool is not properly insulated.
1000 V side cutter
DIN ISO 5749, for soft and hard wires, precision blades with facets
145 (5,5”) 1 10 8785
160 (6”) 1 10 8786
180 (7”) 1 10 8787
250 (10”) 1 10 8788
26

1000 V wire stripper/side cutter
precision blades with facets, length of blades 12 mm, for hard wire up to 1,8 mm diameter, semi-hard wire
up to 2,5 mm diameter and soft wire up to 4 mm diameter. Two stripping positions for large and
multiwire conductors 1,5 mm 2 and 2,5 mm 2 , weight 220 g
160 (6”) 1 10 8792
1000 V heavy duty diagonal cutter
DIN ISO 5749, with offset precision-blade, for hardened steel wire (piano wire),
hard wire and semi-hard wire, weight 250 g.
170 (6,5”) 1 10 8789
200 (8”) 1 10 8784
1000 V heavy duty end cutter
DIN ISO 5745, lay-on joint, length of blades 23 mm, for hardened steel wire (piano wire) up to 1,8 mm
diameter, hard wire up to 2,5 mm diameter and semi-hard wire up to 3 mm diameter, weight 250 g
160 (6”) 1 10 8795
1000 V flat nose plier
DIN ISO 5745, flat jaws (long nose plier), length of jaws 50 mm,
serrated gripping surfaces, weight 160 g
160 (6”) 1 10 8771
1000 V round nose plier
DIN ISO 5745, long, round jaws (long nose plier), length of jaws 50 mm, smooth
gripping surfaces, weight 140 g
160 (6”) 1 10 8773
1000 V needle nose pliers with straight jaws
DIN ISO 5745, long, flat round jaws, serrated gripping surfaces,
with blades for semi-hard and soft wire
160 (6”) 1 10 8779
200 (8”) 1 10 8778
1000 V needle nose pliers with bent jaws
DIN ISO 5745, long, flat round jaws (flat round nose pliers), jaws 45° angled,
serrated gripping surfaces, with blades for semi-hard and soft wire
160 (6”) 1 10 8777
200 (8”) 1 10 8780
1000 V combination Lineman's pliers
DIN ISO 5746, strong, short jaws with facets and pipe grip, serrated gripping surfaces,
with protuberant blades for flush cutting, for hard and semi-hard wire
165 (6”) 1 10 8781
185 (7”) 1 10 8782
200 (8”) 1 10 8783
1000 V water pump pliers
DIN ISO 8976, with five position adjustable double-groove slip joint
250 (10”) 1 10 8724
1000 V wire stripper
with set screw to adjust to the diameter of wire or cord, for large and multiwire conductors up
to 5 mm diameter resp. from 0,75 to 6 mm 2 160 (6”) 1 10 8790
27

1000 V safety pliers assortment
Handles with double dip coating
round nose pliers, unbent 200 (8”) 10 8778
Combination plier
185 (7”)
10 8782
Heavy duty diagonal cutter 200 (8”) 10 8784
Wire stripper
160 (6”)
10 8790
1 10 8002
1000 V flat nose pliers
Specially adapted for meter assembly
200 6 10 0796
Insulated tweezers with 1000 V protection insulation
With 2-layer-safety-insulation and slip-protection, tested according to DIN EN 60900
1000 V 145 1 10 3232
1000 V 145 1 10 3240
Insulated screwdrivers
IEC 60900:2004, classification VDE 0682, part 201.
Individually tested to a testing voltage of 10,000 V.
electricians screwdrivers
DIN 7437
2,5 x 0,4
75
160
12
11 7701
1000 V
3,0 x 0,5
100
185
12
11 7702
3,5 x 0,6
100
185
12
11 7703
4,0 x 0,8
100
185
12
11 7704
5,5 x 1,0
125
220
12
11 7705
6,5 x 1,2
150
245
12
11 7706
8,0 x 1,2
175
285
12
11 7708
10,0 x 1,6
200
310
12
11 7710
Philips screwdrivers
DIN 7438
PH 0
60
145
12
11 7730
PH 1
80
165
12
11 7731
PH 2
100
195
12
11 7732
PH 3
150
260
12
11 7733
Pozidrive screwdrivers
PZ 0
60
145
12
11 7740
PZ 1
80
165
12
11 7741
PZ 2
100
195
12
11 7742
PZ 3
150
260
12
11 7743
special screwdrivers with combination profile
for combined slotted/recessed head screws in electrical installations, i.e. terminal blocks
PZ 1
80
165 12 11 7751
PZ 2
100
195 12 11 7752
Set PZ 1 and PZ 2 (Nr. 11 7751 and 11 7752) 1 11 7750
28

NEW
Hexagon socket head (Allen wrench)
DIN 7439
SW 3
SW 4
SW 5
SW 6
SW 8
75
75
75
100
100
TORX ® -screwdrivers
T 8
T 9
T 10
T 15
T 20
T 25
T 30
Nut driver
DIN 7445
SW 5,5
SW 6
SW 7
SW 8
SW 9
SW 10
SW 11
SW 13
60
60
60
75
100
100
100
125
125
125
125
125
125
125
125
160
160
170
195
210
145
145
155
170
195
195
210
220
220
235
235
235
235
235
235
Screwdriver assortments
Electricians screwdriver assortment – 7-part
VDE-electricians screwdrivers for slotted screws
2,5 x 0,4 x 75
3,0 x 0,5 x 100
4,0 x 0,8 x 100
5,5 x 1,0 x 125
VDE-Philips screwdrivers
PH 1 x 80
PH 2 x 100
VDE-voltage tester - up to 650 V
Slot screwdriver assortment – 5-part
VDE-electricians screwdrivers for slotted screws
2,5 x 0,4 x 75
3,5 x 0,6 x 100
4 x 0,8 x 100
5,5 x 1,0 x 125
6,5 x 1,2 x 150
12
12
12
12
12
12
12
12
12
12
12
12
10
10
10
10
10
10
10
10
11 7823
11 7824
11 7825
11 7826
11 7828
11 7908
11 7909
11 7910
11 7915
11 7920
11 7925
11 7930
11 7805
11 7806
11 7807
11 7808
11 7809
11 7810
11 7811
11 7813
11 7701
11 7702
11 7704
11 7705
11 7731
11 7732
11 1280
1 11 7800
11 7701
11 7703
11 7704
11 7705
11 7706
1 11 7700
Philips/Pozidrive screwdriver assortment – 6-part
VDE-crosshead screwdrivers
PH 1 x 80
PH 2 x 100
PH 3 x 150
PZ 1 x 80
PZ 2 x 100
PZ 3 x 150
Robertson screw drivers
1
2
3
100
125
150
11 7731
11 7732
11 7733
11 7741
11 7742
11 7743
1 11 7745
29
11 7753
11 7754
11 7755
1000 V

Hexagon socket head assortment – 5-part
VDE-hexagon socket head wrenches
SW 3 x 75
SW 4 x 75
SW 5 x 75
SW 6 x 100
SW 8 x 100
TORX ® screwdrivers assortment – 5-part
VDE-TORX-screwdrivers
T 8 x 60
T 10 x 60
T 15 x 75
T 20 x 100
T 25 x 100
11 7823
11 7824
11 7825
11 7826
11 7828
1 11 7820
11 7908
11 7910
11 7915
11 7920
11 7925
1 11 7900
Nut driver assortment – 5-part
VDE-socket wrenches
SW 5,5 x 125
SW 7 x 125
SW 8 x 125
SW 10 x 125
SW 13 x 125
11 7805
11 7807
11 7808
11 7810
11 7813
1 11 7801
Electronics safety screwdrivers assortment – 7-part
IEC 60900:2004
Blade, insulation and handle are inseparably connected to each other,
1000 V
Routinely for slotted screws
1,5 x 0,3 x 40
1,8 x 0,3 x 60
2,0 x 0,4 x 60
2,5 x 0,4 x 75
3,0 x 0,5 x 75
For recessed head screws Phillips
PH 00 x 40
PH 0 x 60
140
160
160
175
175
140
160
11 2000
11 2002
11 2004
11 2006
11 2008
11 2020
11 2022
1 11 2050
30

Tested according to DIN EN 60900/VDE 0680 part 2, bicoloured double dip-coated insulation
Offset screwdrivers
DIN 7439, made of chrome vanadium steel, for screws with hexagon socket
1000 V SW 5
1 11 0804
1000 V SW 6
1 11 0806
T-handle screwdrivers - hex head
Made of chrome vanadium steel
1000 V SW 5
160 1 11 0812
1000 V SW 6
160 1 11 0814
1000 V SW 8
160 1 11 0816
1000 V SW 10
160 1 11 0817
T-socket wrench
DIN 7440, made of vanadium-molybdenum-steel, for hexagon nuts,
Shaft 200 mm, handle 160 mm
1000 V SW 13
1 11 0836
1000 V SW 17
1 11 0840
1000 V SW 19
1 11 0842
Shaft 300 mm, handle 160 mm
1000 V SW 13
1 11 0856
1000 V SW 17
1 11 0860
1000 V SW 19
1 11 0862
1000 V
3/8” DRIVE TOOLS
Hexagon sockets - metric
DIN 7448, 3/8” drive
1000 V SW 8
28 1 11 2520
1000 V SW 10
28 1 11 2522
1000 V SW 11
28 1 11 2523
1000 V SW 13
28 1 11 2525
1000 V SW 14
28 1 11 2526
1000 V SW 15
28 1 11 2527
1000 V SW 16
28 1 11 2528
1000 V SW 17
28 1 11 2529
1000 V SW 18
28 1 11 2530
1000 V SW 19
28 1 11 2531
1000 V SW 22
28 1 11 2534
Hexagon sockets - SAE
DIN 7448, 3/8” drive
1000 V 3/8”
1 119601
1000 V 5/16”
1 119602
1000 V 7/16”
1 119603
1000 V 1/2”
1 119604
1000 V 9/16”
1 119605
1000 V 19/32”
1 119606
1000 V 5/8”
1 119607
1000 V 11/16”
1 119608
1000 V 3/4”
1 119609
1000 V 25/32”
1 119610
1000 V 7/8”
1 119611
1000 V 15/16”
1 119612
1000 V 1”
1 119613
1000 V 1 1/16”
1 119614
1000 V 1 1/4”
1 119615
31

Hexagon sockets “deep” - SAE
For screws with hexagon socket
1000 V 3/8” 1 119616
1000 V 7/16” 1 119617
1000 V 1/2” 1 119618
1000 V 9/16” 1 119619
1000 V 19/32” 1 119620
1000 V 5/8” 1 119621
1000 V 11/16” 1 119622
1000 V 3/4” 1 119623
1000 V 15/16” 1 119624
1000 V
Hex screw sockets - metric
For screws with hexagon socket
1000 V SW 4
65 1 11 2560
1000 V SW 5
65 1 11 2561
1000 V SW 6
65 1 11 2562
1000 V SW 8
65 1 11 2563
1000 V SW 10
65 1 11 2564
Hex screw sockets - SAE
For screws with hexagon socket
1000 V 5/32” 1
119674
1000 V 13/64” 1
119675
1000 V 15/64” 1
119676
1000 V 5/16” 1
119677
1000 V 3/8” 1
119678
Reversible ratchet DIN 7449 3/8” drive
1000 V 190 1 11 2570
Extension DIN 7434 3/8” drive
1000 V 125 1 11 2575
1000 V 250 1 11 2576
T-handle DIN 7436
1000 V 200 1 11 2580
1/2” DRIVE TOOLS
Socket wrench
DIN 7448
1000 V SW 10
50 1 11 2600
1000 V SW 11
50 1 11 2602
1000 V SW 12
50 1 11 2604
1000 V SW 13
50 1 11 2606
1000 V SW 14
50 1 11 2608
1000 V SW 15
50 1 11 2609
1000 V SW 16
50 1 11 2611
1000 V SW 17
50 1 11 2610
1000 V SW 18
50 1 11 2613
1000 V SW 19
50 1 11 2612
1000 V SW 20
50 1 11 2615
1000 V SW 21
50 1 11 2617
1000 V SW 22
50 1 11 2614
1000 V SW 24
50 1 11 2616
1000 V SW 27
50 1 11 2618
1000 V SW 32
50 1 11 2622
32

Hexagon socket - metric
DIN 7448
1000 V 10mm 1
119700
1000 V 11mm 1
119701
1000 V 12mm 1
119702
1000 V 13mm 1
119703
1000 V 14mm 1
119704
1000 V 15mm 1
119705
1000 V 16mm 1
119706
1000 V 17mm 1
119707
1000 V 18mm 1
119708
1000 V 19mm 1
119709
1000 V 20mm 1
119710
1000 V 21mm 1
119711
1000 V 22mm 1
119712
1000 V 24mm 1
119713
1000 V 27mm
1
119714
1000 V 32mm
1
119715
Hexagon sockets - SAE
DIN 7448
1000 V 3/8” 1 119625
1000 V 7/16” 1 119626
1000 V 1/2” 1 119627
1000 V 9/16” 1 119628
1000 V 19/32” 1 119629
1000 V 5/8” 1 119630
1000 V 11/16” 1 119631
1000 V 3/4” 1 119632
1000 V 25/32” 1 119633
1000 V 7/8” 1 119634
1000 V 15/16” 1 119635
1000 V 1” 1 119636
1000 V 1 1/16” 1 119637
1000 V 1 1/4” 1 119638
Hexagon sockets “deep” - SAE
For screws with hexagon socket
1000 V 3/8” 1 119639
1000 V 7/16” 1 119640
1000 V 1/2” 1 119641
1000 V 9/16” 1 119642
1000 V 19/32” 1 119643
1000 V 5/8” 1 119644
1000 V 11/16” 1 119645
1000 V 3/4” 1 119646
Hexagon screw sockets - metric
For screws with hexagon socket
1000 V SW 4
70 1 11 2670
1000 V SW 5
70 1 11 2671
1000 V SW 6
70 1 11 2672
1000 V SW 8
70 1 11 2673
1000 V SW 10
70 1 11 2674
Hexagon screw sockets - SAE
For screws with hexagon socket
1000 V 5/32” 1 119679
1000 V 13/64” 1 119680
1000 V 15/64” 1 119681
1000 V 5/16” 1 119682
1000 V 3/8” 1 119683
33

Reversible ratchet 1/2” drive
DIN 7449
1000 V 250 1 11 2628
Extensions 1/2” drive
DIN 7434
1000 V 125 1 11 2640
1000 V 250 1 11 2642
T-handle
DIN 7436
1000 V 200 1 11 2650
Torque wrench
Fully insulated DIN EN 60900, VDE 0680/2, with integrated reversible ratchet, adjustable from 5 – 50 Nm
3/8” drive
1000 V 5 - 50 Nm
370 1 11 2581
1/2” drive
1000 V 5 - 50 Nm
370 1 11 9900
Open- ended wrenches
DIN 7446, made of chrome vanadium steel, 15° cranked
1000 V SW 8
105 1 11 2704
1000 V SW 9
105 1 11 2706
1000 V SW 10
105 1 11 2708
1000 V SW 11
115 1 11 2710
1000 V SW 12
125 1 11 2712
1000 V SW 13
132 1 11 2714
1000 V SW 14
140 1 11 2716
1000 V SW 15
150 1 11 2718
1000 V SW 16
160 1 11 2719
1000 V SW 17
160 1 11 2720
1000 V SW 18
165 1 11 2721
1000 V SW 19
170 1 11 2722
1000 V SW 22
195 1 11 2724
1000 V SW 24
220 1 11 2726
1000 V SW 27
230 1 11 2728
1000 V SW 30
240 1 11 2730
1000 V SW 32
240 1 11 2732
Open- ended wrenches
DIN 7446, made of chrome vanadium steel, 15° cranked
1000 V 5/16” 1
119647
1000 V 11/32” 1
119648
1000 V 3/8” 1
119649
1000 V 7/16” 1
119650
1000 V 1/2” 1
119651
1000 V 9/16” 1
119652
1000 V 19/32” 1
119653
1000 V 5/8” 1
119654
1000 V 11/16” 1
119655
1000 V 3/4” 1
119656
1000 V 15/16” 1
119657
1000 V 1” 1
119658
1000 V 1 1/16” 1
119659
1000 V 1 1/4” 1
119660
34

Box wrench
DIN 7447, made of chrome vanadium steel, deep-offset
1000 V SW 8
155 1 11 2754
1000 V SW 10
165 1 11 2758
1000 V SW 11
175 1 11 2760
1000 V SW 12
185 1 11 2762
1000 V SW 13
190 1 11 2764
1000 V SW 14
200 1 11 2766
1000 V SW 15
210 1 11 2768
1000 V SW 16
210 1 11 2769
1000 V SW 17
210 1 11 2770
1000 V SW 18
220 1 11 2771
1000 V SW 19
230 1 11 2772
1000 V SW 22
250 1 11 2774
1000 V SW 24
270 1 11 2776
1000 V SW 27
300 1 11 2778
1000 V SW 30
300 1 11 2780
Box wrench
DIN 7447, made of chrome vanadium steel, deep-offset
1000 V 5/16” 1
119661
1000 V 3/8” 1
119662
1000 V 7/16” 1
119663
1000 V 1/2” 1
119664
1000 V 9/16” 1
119665
1000 V 19/32” 1
119666
1000 V 5/8” 1
119667
1000 V 11/16” 1
119668
1000 V 3/4” 1
119669
1000 V 15/16” 1
119670
1000 V 1” 1
119671
1000 V 1 1/16” 1
119672
1000 V 1 1/4” 1
119673
With straight blade
Blade length 50 mm
1000 V cable knife
1
12 0042
1000 V cable knife
With straight blade and insulated blade back
Blade length 50 mm
With hook-shaped blade
Blade length 35 mm
1000 V cable knife
1000 V cable knife
1
1
12 0043
12 0044
Blade length 50 mm
1
12 0045
1000 V cable knife
With hook-shaped blade and protective knob
Blade length 40 mm
1
12 0046
35

1000 V safety cable knife
With insulated blade back and foldable, in handle blade protection
With interchangeable blade
Blade length 50 mm
Interchangeable spare blade
Blade length 50 mm
1
1
12 0064
12 0066
Automatic stripping tongs SAFETY STRIP
For flexible cords and large conductors from 0,2 to 6 mm 2 , tested according to DIN EN 60 900:2004, automatic
adjustment to diameter of conductor, integrated length stop and closer for transport and storage
1 10 0762
1000 V “One hander” high leverage wire cutters
With double dip-coated special handle jackets, high-gloss polished chromium-plate
For cables ø massive mm 2 flexible mm 2
16 mm 16 50 160 1 12 0206
25 mm 25 70 200 1 12 0202
Cable cutter, 1000 V
For cables ø profile mm 2
26 mm 120
600 1 12 0158
1000 V mini hack saw frame
Fully insulated
Span 150 mm
250
1
12 0700
1000 V hack saw frame
Fully insulated
Spann 300 mm
450
1
12 0702
1000 V insulated blankets
Grease - and acid-proof, for covering parts, (VDE 0680/1)
L x W x H mm
600 x 600 x 1,6 1 14 0154
1000 x 1000 x 1,6 1 14 0156
1200 x 1200 x 1,6 1 14 0158
Roll
For fastening protective towels
10 m x 1 m x 1,6 mm
1000 V clamp made of plastic
1
14 0157
Length mm
80 1 14 0179
160 1 14 0180
Switch cabinet keys made of metal
A great little tool for opening panels on European production machinery.
These panels are often found on printing presses and other specialty machinery. This key opens them all!
Slotted screws 1,0 x 7,0 mm
Crosshead screws PH 2
7 - 8 mm
6 mm
5 mm
7 - 8 mm
3 - 5 mm
Universal switch cabinet key
1
11 2894
Switch cabinet key-box
1
11 2898
36

Dimension mm
No.
Universal cable jacket cutter
For removing all insulating layers of cables from 25 mm diameter, i.e. lead sheath, rubber, PE, PVC
Cutting depth adjustable from 0,5 – 5 mm
For lengthwise and circular cuts, in plastic case, interchangeable blade.
1 12 0002
Spare knife
1
12 0003
Wire stripper KABIFIX
for lengthwise and circular cuts. For slitting and stripping cables from 6 to 28 mm diameter (up to 4.0), even
for cutting off PVC-tubes, interchangeable blade.
1 12 0030
Spare blade
Wire stripper ROTAX 29
10
12 0032
Professional wire stripper for circular, lengthwise, and spiral cuts in cables from 4,5 to 29 mm diameter.
Because of the unique spiral cut even difficult insulation (i.e. rubber, butyl) can be removed without problems.
Depth of cut adjustable, extra robust plastic body and extra sharp, interchangeable blade.
4,5 – 29 mm diameter
140
1
12 0036
Spare blade
1
12 0038
Wire stripper MULTISTRIPPER
New tool for working on all round cables from 8 to 13 mm diameter.
baring: circular and lengthwise cuts as well as flush stripping even in locations difficult to access, as i.e. in ceiling
and wall area, in distribution and junction boxes.
Stripping: flexible and large conductors 0,5 – 0,75 – 1,5 – 2,4 – 4 – 6 mm 2
Cutting off: large conductors up to 4 mm 2 , flexible conductors up to 6 mm 2
1 12 0021
- Super-stripper
Titanium nitride coated for durability and sharpness.
With circular and lengthwise cutter, stripping device and retractable add-on blade
Baring: cables from 8 – 13 mm diameter, i.e.: 7 x 1,5 or 5 x 2,5 mm 2
Stripping: 0,2 – 0,3 – 0,8 mm diameter, 1,5 – 2,5 - 4 mm 2 1 12 0025
TiN
- universal-cable stripper
Titanium nitride coated for durability and sharpness. For all usual cables from 8 – 13 mm diameter
Especially applicative on locations difficult to access
1 12 0028
TiN
- flat cable stripper
For all flat and oval cables up to 12 mm width, stripping of conductors and flexible strands
0,75 mm2 – 1,5 mm 2 – 2,5 mm 2 1 12 0029
- PC-STRIP
Titanium nitride coated for durability and sharpness. Special baring and stripping tool for data and
control cables, telecommunication cables, system cables.
Baring: cables from 5,5 – 15 mm diameter
Stripping: conductors from 0,2 . 4,0 mm2 or AWG 26 – 11
1 12 0034
TiN
37

Dimension mm
No.
- stripper for power and safety cables
Halogen-free lines (NSGAFÖU, VER H07RN-F, ignition cables),
no adjustment of cutting depth needed, with integrated length setting.
for wire diameter length setting
1,5 mm 2 8 mm
1 12 0022
2,5 mm 2 bis 6 mm 2 10 mm
1 12 0023
10 mm 2 bis 16 mm 2 12 mm
1 12 0024
- baring and stripping tool for rubberized AS-interface
AS-Interface-Kabel
For the fast and precise baring and stripping of twin-core actuator sensor interface cables (ASI) with rubberized
external insulation up to 12 mm width.The cutting blades are designed for the special cable form, adjustment
of cutting depth not needed, lateral single blade for stripping of the two inner conductors (1,5 mm 2 ).
125 1 12 0019
- stripping plier for AS-Interface-cables with
TPE- or PUR-insulation
For the fast and precise baring and stripping of twin-core actuator sensor interface cables (ASI) with external
insulation made of TPE (thermoplastic elastomeres) or PUR (polyurethane) up to 12 mm width.
Blade adapts itself to the cable profile, adjustment of cutting depth not needed, no damage of internal conductors
possible. Fibreglass body, blade interchangeable, specially ground and hardened, weight only 120 g.
160 1 10 0748
spare blade
1 pair
10 0749
- cable stripper COAXI
Titanium nitride coated for durability and sharpness. For all cables from 4,8 – 7,58 mm diameter
For coaxial cables (antenna cables)
1 12 0027
TiN
Cable stripper CUT AND STRIP
Successive cutting off, baring and stripping of all usual coaxial cables as well as many flexible cables, integrated
cable cutter up to 6 mm 2
4,8 - 7,5 mm diameter 1 12 0026
Cable stripper CUT AND STRIP
For coaxial cables, esp. RG 58, RG 59, RG 62, RG 6; cutting depth of blades adjustable, 3 interchangeable blades,
cutting distance optional 8 mm, 6 mm and 4 mm
110 1 12 0098
-QUADRO
The pliers with 4 functions
For the precise working of wire end ferrules
in ribbon form 0,5 – 2,5 mm2
Functions:
1. cutting
For wires and strands up to 2,5 mm2
2. stripping
Working range 0,5 – 2,5 mm2
3. twisting
No fan out of wires and therefore safe inducting
of the conductor to the wire end ferrule.
4. crimping
Perfect crimping from 0,5 – 2,5 mm2 by professional trapezium pressing
QUADRO-case complete
1
10 0728
- pliers QUADRO with magazine 180 1 10 0725
38

Dimension mm
No.
Precision stripper MICRO-STRIPPER
Precision stripping tool for 6 different wire diameters.Adjustable length setting for wires
with insulation made of: MYLAR®, KYNAR®,TEFZEL®,TEFLON®, PVC and others
AWG 36 34 32 30 28 26
mm diameter 0,12 0,16 0,20 0,25 0,30 0,40
1 10 0694
AWG 30 28 26 24 22 20
mm diameter 0,25 0,30 0,40 0,50 0,60 0,80
1 10 0695
AWG 28 26 24 22 20 18
mm diameter 0,30 0,40 0,50 0,60 0,80 1,00
1 10 0696
Varnish stripper
For wires diameter mm
0,5
(AWG 24)
125
6
10 0710
0,6
(AWG 22)
125
6
10 0712
Stripping pliers LWL
Precision stripper with 3 stripping positions for primary coating, secondary coating and outer coating of
optical waveguide cables, preset cut depth, infinitely variable adjustment, locking mechanism,
ergonomic 2-component-handles.
1 12 1104
Micro-stripper LWL
Highly precise stripping tool for optical waveguide-primary coating, for 0,18 mm (180 µm) diameter
1 10 0698
Automatic cable stripper
Cable stripper for circular and lengthwise cuts, cutting depths adjustable,
damage of the inner conductors is impossible. Handle jackets made of wear-resistant polyamide.
Titanium nitride coated for durability and sharpness
- cable stripper with hook-shaped blade
Titanium nitride coated for durability and sharpness.
8 - 28 mm diameter
- cable stripper with straight blade
Titanium nitride coated for durability and sharpness.
8 - 28 mm diameter
- cable stripper without blade
1
1
12 0010
12 0011
TiN
TiN
TiN
Titanium nitride coated for durability and sharpness. For slitting and stripping of waterproof installation cables
TiN
4 - 16 mm diameter
8 - 28 mm diameter
28 - 35 mm diameter
35 - 50 mm diameter
1
1
1
1
12 0012
12 0014
12 0016
12 0018
- cable stripper with hook-shaped blade
Titanium nitride coated for durability and sharpness. Standard-version
8 - 28 mm diameter
1
12 1010
TiN
39

Dimension mm
Standard-version
8 - 28 mm diameter
- cable stripper with straight blade
1
No.
12 1011
- cable stripper without external blade
Fully insulated, all parts except inner knife made of plastic, for baring all usual cables
8 - 28 mm diameter
1 12 0008
Spare blades
For all Jokari-cable stripper
1 12 0020
TiN
TiN
TiN
1000 V safety-cable knife
With insulated back of blade and folding, in-handle retractable blade protection,
with interchangeable blade
Blade length 50 mm
1
12 0064
interchangeable blade
Blade length 50 mm
1
12 0066
1000 V safety-cable knife
NEW
Cable knife especially for working on insulation of large cables, with straight, powerful blade made of
non-corroding steel, blade length about 50 mm. 1000 V protective insulated handle with large slip protection
Modern 2-component handle (polypropylene with soft rubber insertion). Comfortable and safe even when
wet, cold or hot.With blade protection cap.
1 12 1042
Single-hand ratchet-cable cutter
For non compression cutting of cables to a maximum of 45mm. For copper and aluminum cables.
Not suitable for cutting steel wire, ACSR. Features hardened edges and compact design.
Can be used with one hand. Simple construction makes it easily repairable.
cutting-power: copper: up to 4 x 70 mm 2 for fine-strand and multi-wire conductors resp. 300 mm 2 at large conductors
Aluminium: up to 4 x 95 mm 2 for fine-strand and multi-wire conductors resp. 400 mm 2 at large conductors.
1 12 0168
Cable cutter
Cable cutter with max. cutting-power, cutting of cables with steel strip armouring or lead sheath possible,.
With ratchet drive and pawl, handles with hand-protection.
For cables up to diameter
60 mm
100 mm
720
870
1
1
12 0170
12 0172
Cable snip
Edges made of 3 mm non-corroding high-grade steel, handles made of shock-resistant plastic, hardness HRC 50
to 54, self-locking nut and washer made of VA, safety lock, self-opening by spring, practical for left- and right-handers.
For cutting of cables and conductors up to 10 mm diameter, insulation, wood, rope and other materials
165 1 12 0110
Cable shears for optical waveguides
Specially designed for Kevlar- and aramid-fibres.
with ceramic edges
145
1
12 0250
Edges made of high-alloy, non-corroding high-grade steel, hardness HRC 60 to 62, hardness of edges HK 1200,
one edge micro-serrated, adjustable screw joint, ergonomic plastic handles, practical for left- and right-handers
cutting length 42 mm
160 1 12 0252
40

Dimension mm
No.
single-hand cable snip
For copper and aluminium-cables, very good cutting power, clean cut without deformation, die forged,
with precision-grinding, adjustable screw-joint, 2-component-plastic-handle jackets
for cable diameter large mm 2 flexible mm 2
16 mm 16 50 160 6 12 0204
1000 V single-hand cable snip
For copper and aluminium cables, very good cutting-power, clean cut without deformation, double insulated
for cable diameter large mm 2 flexible mm 2
16 mm 16 50 160 6 12 0206
“One hander” cable snip
For copper and aluminium-cables, very good cutting power, clean cut without deformation, closed die forged,
with precision-grinding, adjustable screw-joint, 2 component plastic handle jackets
for cable diameter large mm 2 flexible mm 2
25 mm 25 70 200 6 12 0200
1000 V “One hander” cable snip
For copper- and aluminium cables, very good cutting power, clean cut without deformation, double insulated
for cable diameter large mm 2 flexible mm 2
25 mm 25 70 200 6 12 0202
cable snip
universal cable snip for copper, aluminium and coax cables. For large conductors up to 10 mm diameter
or 50 mm 2 and multicore cables up to 12 mm diameter or 70 mm 2 for stripping (particular area on cutting head)
"Strips and cuts." With ergonomically formed two component handle
jackets, weight 300 g.
200 1 12 0238
cable shear
steel tube legs PVC-coated
for cable diameter mm 2
14 mm
50
280 1 12 0148
cable shears
with leverage and interchangeable knife head, steel tube legs PVC coated
0
26 mm
120
600 1 12 015
for cable diameter diameter mm 2
38 mm
300
930 1 12 0152
cable shear
with telescopic handle, progressively adjustable 350 – 520 mm
for cable diameter diameter mm 2
26 mm
120
350 - 520 1 12 0159
cable shear with 1000 Volt insulation
for cable diameter diameter mm 2
26 mm
120
600 1 12 0158
cable cutter
with patented leverage and hand guard, for copper- and aluminium cables
for cable
diameter
diameter mm large mm 2
32
1 x 250
305 1 12 0160
cable cutter
with ratchet drive, single-hand-shear with high cutting power for copper- and aluminium cables
for cable diameter flexible
diameter mm large mm 2 mm 2
38 1 x 300 4 x 90 290 1 12 0164
55 1 x 450 4 x 120 290 1 12 0165
41

1000 V Insulated Tool Kits
PART NUMBER
DESCRIPTION
BASIC
PRO
DELUX
SUPER
108724 Water pump pliers
• • •
108771 6" flat nose pliers • • • •
108778 8" needle nose pliers
• • •
108783 Linesman pliers • • • •
108784 7 1/2" diagonal pliers
•
108788 10" side cutters
• •
108792 6" side cutter with wire stripper • • • •
108795 8" top cutter
•
•
112570 reversible ratchet 3/8" drive
•
112575 short extension
•
112576 long extension
•
112581 torque wrench 3/8" drive
•
117754 Robertson screwdriver # 8 • • • •
117755 Robertson screwdriver # 10 • • • •
117800 screwdriver kit- 7 piece • • • •
120202 high leverage wire snips • • • •
120046 cable stripping knife w/ safety knob • • •
BOX 1 10 piece box wrench set 3/8""- 1"
•
economy case case
•
standard case case1
•
Deluxe case case2
•
tool roll tool roll
•
HWS14L long arm hex wrench set
•
P100CT 10" crimping plier
•
P9CC 9 1/2" cable cutting plier
•
SOCK1 10 piece socket set 5/16"- 7/8"
•
TR8ND 6 piece long nut driver set 3/16"- 1/2"
•
WS45-215 wire stripper 7 5/8"
• •
Kits are not exactly as shown in
pictures. Custom kits are available
for all applications. Contact your
PMMI rep for further information.
Cimco Tool Sets
PMMI International Ltd. - Toll Free: 888.283.7664 / Local: 416.289.0588 - www.pmmiintl.com
42

PART# AM1
ELECTRO STATIC DISSIPATIVE MATTING
PART# AM2

PMMI INTERNATIONAL LTD.
1147 Bellamy Rd. N., Suite 6, Scarborough, ON M1H 1H6
Phone: 888.283.7664 / Local: 416.289.0588
www.pmmiintl.com