Lubrita Motor Oils

Product catalog
PASSENGER VEHICLE LUBRICANTS
Designed For High Efficiency

Passenger vehicle engine oils
Lubrita Go Life FE SAE 0W-20
A fuel economy motor oil
NS-PVL-4005
Product Description and Benefits
A fuel economy motor oil, developed according the most
recent technology, based on specially selected synthetic
base oils and a well balanced choice of advanced additives
to obtain the following properties:
• a lower fuel consumption
• a high and stable viscosity index
• a good resistance against shearing
• a fast cold start, even at very low temperatures
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion power
• a very strong protection against wear, corrosion and
foaming
Application
This fuel economy, specially composed motor oil, is recommended
for use in petrol anddiesel engines, with or
without turbo-charging, in passenger cars and delivery
vans.Due to its special composition, this product may
well be applied to very lowtemperatures, such as under
arctic conditions may occur.
Lubrita Go Life FE SAE 0W-20 meets the following performance
specifications:
API SN/CF; ACEA A1/B1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,846
Viscosity -35 °C mPa.s 5320
Viscosity 40 °C mm 2 /s 46,70
Viscosity 100 °C mm²/s 8,54
Viscosity Index 162
Flash Point COC °C 230
Pour Point °C -48
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Go Life SAE 0W-30
Sophisticated fully synthetic fuel economy universal motor oil
NS-PVL-4006
Product Description and Benefits
This sophisticated fully synthetic fuel economy universal
motor oil is produced with high quality synthetic base oils
with a high viscosity index and a well-balanced choice of
advanced additives to obtain the following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal fuel economy synthetic motor oil is recommended
for use in petrol and diesel engines, with
or witout turbo charging, in passenger cars and delivery
vans with the specifications as stated below.
Lubrita Go Life SAE 0W-30 meets the following performance
specifications:
API SM/CF; ACEA A3/B4; MB 229.3; VW 502.00/505.00;
BMW Longlife-98; Renault RN0700
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,848
Viscosity -35 °C mPa.s 5400
Viscosity 40 °C mm 2 /s 56,60
Viscosity 100 °C mm²/s 10,20
Viscosity Index 170
Flash Point COC °C 230
Pour Point °C -51
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Go Life SAE 0W-40
Universal fully synthetic fuel economy motor oil
ST-PVL-4007
Product Description and Benefits
A nowadays universal fully synthetic fuel economy motor
oil produced with high quality synthetic base oils and a
well balanced choice of advanced additives to obtain the
following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal fuel economy synthetic motor oil is recommended
for use in petrol and diesel engines, with or without
turbo charging, in passenger cars and delivery vans
with the specifications as stated below. Its low viscosity
enables the application of this motor oil under extreme
conditions.
Lubrita Go Life SAE 0W-40 meets the following performance
specifications:
API SM/CF; ACEA A3/B4; MB 229.3; VW 502.00/505.00;
BMW Longlife-01; Renault RN0700/RN0710; Porsche
A40
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,846
Viscosity -35 °C mPa.s 6000
Viscosity 40 °C mm 2 /s 83,70
Viscosity 100 °C mm²/s 14,00
Viscosity Index 173
Flash Point COC °C 232
Pour Point °C -46
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Go Life SAE 5W-40
An extreme modern, synthetic, fuel economy, universal motor oil
ST-PVL-4018
Product Description and Benefits
An extreme modern, synthetic, universal motor oil based
on special selected synthetic base oils with a high viscosity
index and a well balanced choice of advanced additives
to obtain the following properties:
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a very strong resistance against oxidation
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
A universal, special composed synthetic motor oil recommended
for use in petrol and diesel engines, with or without
turbo-charging, in passenger cars and delivery vans
for which the most modern specifications are required.
Lubrita Go Life SAE 5W-40 meets the following performance
specifications:
ACEA A3/B4; API SN/CF; VW 502.00/505.00; MB
229.3/226.5; PSA specification B71 2296; Porsche A40;
BMW Longlife-01; Renault RN0700/RN0710; GM LL-B-
025; Fiat 9.55535-M2
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,858
Viscosity -30 °C mPa.s 6110
Viscosity 40 °C mm 2 /s 87,40
Viscosity 100 °C mm²/s 14,40
Viscosity Index 172
Flash Point COC °C 223
Pour Point °C -33
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Eco Life C3 SAE 5W-20
A fuel economy, universal motor oil
NS-PVL-4009
Product Description and Benefits
A modern, synthetic, fuel economy motor oil based on
special selected synthetic base oils with a high viscosity
index and a well balanced choice of advanced additives to
obtain the following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a very strong resistance against oxidation
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
A fuel economy, special composed synthetic motor oil
recommended for use in petrol and diesel engines, with
or without turbo-charging, in passenger cars and delivery
vans.
Lubrita Eco Life C3 SAE 5W-20 meets the following performance
specifications:
API SN/CF; ACEA A3/B4, C3
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,855
Viscosity -30 °C mPa.s 6010
Viscosity 40 °C mm 2 /s 31,10
Viscosity 100 °C mm²/s 8,50
Viscosity Index 158
Flash Point COC °C 228
Pour Point °C -39
Total Base Number mgKOH/g 7,3
Lubrita Eco Life C1 SAE 5W-30
A fuel economy, universal motor oil
NS-PVL-4010
Product Description and Benefits
Fuel economy, universal motor oil, developed according
the most recent technology, based on specially selected
synthetic base oils. By applying advanced additives the
exceptional performance of this low SAPS motor oil is accentuated.
• a lower fuel consumption
• suitable for modern catalysts
• low combustion ash building (low SAPS)
• a fast cold start
• a safe lubrication film at high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
Universal, fuel economy, specially composed motor oil,
recommended for use in petrol and diesel engines, with
or without turbo-charging, in passenger cars and deliveryvans.
Due to its special composition this product can
be applied in vehicles with modernthree way catalysts
and diesel particle filters. Due to its low SAPS content this
motor oilcontributes to the extension of the lifetime of
particle filters for diesel engines.
Warning: These oils have the lowest SAPS limits and may
be unsuitable for use insome engines.
Health and Safety
Lubrita Eco Life C1 SAE 5W-30 meets the following performance
specifications:
ACEA C1; Ford WSS-M2C934-B; Jaguar Land Rover
STJR.03.5005
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,849
Viscosity -30 °C mPa.s 3900
Viscosity 40 °C mm 2 /s 52,50
Viscosity 100 °C mm²/s 9,46
Viscosity Index 166
Flash Point COC °C 224
Pour Point °C -39
Total Base Number mgKOH/g 6,2
Sulphate Ash % 0,49
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Eco Life C2 SAE 5W-30
A fuel economy, universal motor oil
NS-PVL-4011
Product Description and Benefits
A fuel economy, universal motor oil, developed according
the most recent technology, based on specially selected
synthetic base oils to which advanced additives are addedto
obtain the following properties:
• a lower fuel consumption
• suitable for modern catalysts
• a fast cold start
• a safe lubrication film at high temperatures
• extended oil drain intervals
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal, fuel economy, low SAPS motor oil is recommended
for use in petrol anddiesel engines, with or
without turbo-charging, in passenger cars and delivery
vans withextended oil drain intervals. Due to its low SAPS
content this product can be applied invehicles with modern
three way catalysts and diesel particle filters.
Lubrita Eco Life C2 SAE 5W-30 meets the following performance
specifications:
API SN/CF; ACEA C2; Renault RN0700; Fiat 9.55535-S1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,853
Viscosity -30 °C mPa.s 5550
Viscosity 40 °C mm 2 /s 61,70
Viscosity 100 °C mm²/s 10,50
Viscosity Index 160
Flash Point COC °C 236
Pour Point °C -45
Total Base Number mgKOH/g 7,7
Sulphate Ash % 0,76
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Eco Life C4 SAE 5W-30
A fuel economy, universal motor oil
Product Description and Benefits
A fuel economy, universal motor oil, developed according
the most recent technology,based on specially selected
synthetic base oils. By applying advanced additives theexceptional
performance of this low SAPS motor oil is accentuated.
• a lower fuel consumption
• suitable for modern catalysts
• low combustion ash building (low SAPS)
• a fast cold start
• a safe lubrication film at high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
An universal, fuel economy, specially composed motor
oil, recommended for use in petrol and diesel engines,
with or without turbo-charging, in passenger cars and deliveryvans.
Due to its special composition this product can
be applied in vehicles for whichthe Renault specification
RN0720 is asked and are equipped with modern three
waycatalysts and diesel particle filters. Due to its low SAPS
content this motor oilcontributes to the extension of the
lifetime of particle filters for diesel engines.
Warning: These oils have the lowest SAPS limits and may
be unsuitable for use insome engines.
Lubrita Eco Life C4 SAE 5W-30 meets the following performance
specifications:
ACEA C4; MB-226.51; Renault RN0720
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,851
Viscosity -30 °C mPa.s 6020
Viscosity 40 °C mm 2 /s 66,00
Viscosity 100 °C mm²/s 11,70
Viscosity Index 174
Flash Point COC °C 228
Pour Point °C -39
Total Base Number mgKOH/g 7,3
Sulphate Ash % 0,49
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
ST-PVL-4012
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Eco Long Life OEM SAE 5W-30
A fuel economy, universal motor oil
Product Description and Benefits
Fuel economy, universal motor oil, developed according
the most recent technology, based on specially selected
synthetic base oils and a well balanced choice of advanced
additives to obtain the following properties:
• a lower fuel consumption
• low SAPS content
• suitable for modern catalysts
• a fast cold start
• a safe lubrication film at high temperatures
• extended oil drain intervals
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal, fuel economy, specially composed motor
oil, is recommended for use in petrol and diesel engines,
with or without turbo-charging, in passenger cars and
delivery vans with extended oil drain intervals. This motor
oil also contributes to the extension of the lifetime of
particle filters. Due to its special composition it is possible
to apply this product for the latest VW 504.00/507.00
requirements, in practice also called VW Longlife III oils.
Lubrita Eco Long Life OEM SAE 5W-30 meets the following
performance specifications:
ACEA C3; VW 504.00/507.00; MB-229.51; BMW
Longlife-04; Porsche C30
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,851
Viscosity -30 °C mPa.s 5950
Viscosity 40 °C mm 2 /s 69,20
Viscosity 100 °C mm²/s 12,00
Viscosity Index 171
Flash Point COC °C 230
Pour Point °C -42
Total Base Number mgKOH/g 6,7
Sulphate Ash % 0,67
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
ST-PVL-4016
Lubrita Eco Life C3 SAE 5W-40
A universal, synthetic fuel economy motor oil
ST-PVL-4019
Product Description and Benefits
A universal, synthetic fuel economy motor oil developed
according the most recenttechnology and based on specially
selected base oils with a high natural viscosity index.
With the addition of a well-balanced choice of advanced
additives the following properties are obtained:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• reduced formation of combustion ashes
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal, fuel saving synthetic motor oil, is specially
developed for passenger carunit injector diesel engines.
More over this lubricant is very suitable for use in petrol
anddiesel engines, with or without turbo-charging. This
product meets the requirements of several OEM’s and
thus has a wide application.
Lubrita Eco Life C3 SAE 5W-40 meets the following performance
specifications:
ACEA A3/B4, C3; API SN/CF; VW 505.01; VW
502.00/505.00; MB-229.51; BMW Longlife-04; Ford
M2C917-A; Porsche A40; Renault RN0700/RN0710;
Dexos 2, MB 229.31/226.5; Fiat 9.55535-S2
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,850
Viscosity -30 °C mPa.s 5500
Viscosity 40 °C mm 2 /s 82,80
Viscosity 100 °C mm²/s 14,00
Viscosity Index 175
Flash Point COC °C 232
Pour Point °C -42
Total Base Number mgKOH/g 7,7
Sulphate Ash % 0,77
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Eco Life C3 SAE 5W-30
Universal, synthetic fuel economy motor oil
ST-PVL-4017
Product Description and Benefits
A universal, synthetic fuel economy motor oil developed
according the most recenttechnology and based on specially
selected base oils with a high natural viscosity index.
With the addition of a well-balanced choice of advanced
additives the following properties are obtained:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• reduced formation of combustion ashes
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal, fuel saving synthetic motor oil, is specially
developed for passenger carunit injector diesel engines.
More over this lubricant is very suitable for use in petrol
anddiesel engines, with or without turbo-charging. This
product meets the requirements of several OEM’s and
thus has a wide application.
Lubrita Eco Life C3 SAE 5W-30 meets the following performance
specifications:
ACEA C3, API SN, MB-229.51, MB 229.52, VW
502.00/505.00/505.01, Dexos 2, BMW-Longlife-04
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,851
Viscosity -30 °C mPa.s 6000
Viscosity 40 °C mm 2 /s 69,10
Viscosity 100 °C mm²/s 12,30
Viscosity Index 178
Flash Point COC °C 230
Pour Point °C -36
Total Base Number mgKOH/g 7,4
Sulphate Ash % 0,78
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Special Long Life FE SAE 5W-30
Modern synthetic fuel economy motor oil
ST-PVL-4013
Product Description and Benefits
This modern synthetic fuel economy motor oil is produced
with special selected synthetic base oils and a
well-balanced choice of advanced additives to obtain the
following properties:
• a lower fuel consumption
• a high and stable viscosity index
• a high resistance against shearing
• a fast cold start
• a very strong resistance against oxidation
• a safe lubrication film at high temperatures
• a very good detergency and dispersion power
• a very strong protection against wear, corrosion and
foaming
Application
This fuel economy motor oil is recommended for use in
petrol and diesel engines, with or without turbo-charging,
in passenger cars and delivery vans with the specifications
asstated below. This motor oil is specially developed
for those cars, that ask for motor oils that fulfill the
recent requirements of the OEM’s. This oil is fully backwards
compatible with Ford M2C 913-A, B and C.
Lubrita Special Long Life FE SAE 5W-30 meets the following
performance specifications:
ACEA A1/B1, A5/B5; API SL/CF; Ford WSS-M2C913-D;
Renault RN0700
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,853
Viscosity -30 °C mPa.s 4200
Viscosity 40 °C mm 2 /s 53,30
Viscosity 100 °C mm²/s 9,66
Viscosity Index 168
Flash Point COC °C 220
Pour Point °C -45
Total Base Number mgKOH/g 10,1
Sulphate Ash % 1,09
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Special Life D SAE 5W-30
A fuel economy, universal motor oil
ST-PVL-4029
Product Description and Benefits
A fuel economy, universal motor oil, developed according
the most recent technology, based on specially selected
synthetic base oils to which advanced additives are added
to obtain the following properties:
• lower fuel consumption
• suitable for modern catalysts
• fast cold start
• safe lubrication film at high temperatures
• extended oil drain intervals
• very good detergency and dispersion
• very strong protection against wear, corrosion and
foaming
Application
This universal, fuel economy, low SAPS motor oil is recommended
for use in petrol and diesel engines, with or
without turbo-charging, in passenger cars and delivery
vans with extended oil drain intervals. Due to its low SAPS
content this product can be applied in vehicles with modern
three way catalysts and diesel particle filters.
Lubrita Special Life D SAE 5W-30 meets the following
performance specifications:
ACEA C2/C3, API SN, Dexos 2, MB-229.31/229.51/229.52
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,853
Viscosity -30 °C mPa.s 5310
Viscosity 40 °C mm 2 /s 72,80
Viscosity 100 °C mm²/s 12,00
Viscosity Index 166
Flash Point COC °C 232
Pour Point °C -45
Total Base Number mgKOH/g 7,1
Sulphate Ash % 0,77
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Special Long Life GM SAE 5W-30
Synthetic, fuel economy, universal motor oil
ST-PVL-4014
Product Description and Benefits
An extreme modern, synthetic, fuel economy, universal
motor oil, produced with special selected base oils with
a high viscosity index and a well balanced choice of advanced
additives to obtain the following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• flexibel oil drain intervals
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This special composed, universal, fuel economy motor oil
is recommended for use in petrol and diesel engines, with
or without turbo-charging, in passenger cars and deliveryvans
with flexible oil drain intervals. Due to its special
composition is this product extremely suitable for Opel
GM-LL-A-025/B-025.
Lubrita Special Long Life GM SAE 5W-30 meets the following
performance specifications:
ACEA A3/B4; API SL/CF; GM LL-A-025/LL-B-025
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,854
Viscosity -30 °C mPa.s 5960
Viscosity 40 °C mm 2 /s 70,10
Viscosity 100 °C mm²/s 11,70
Viscosity Index 163
Flash Point COC °C 242
Pour Point °C -40
Total Base Number mgKOH/g 11,1
Sulphate Ash % 1,41
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Special Long Life V SAE 0W-30
A fuel economy, fully synthetic motor oil
ST-PVL-4015
Product Description and Benefits
A fuel economy, fully synthetic motor oil produced with
advanced new technology additives to obtain the following
properties:
• a lower fuel consumption
• a very high viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This fuel saving, fully synthetic motor oil is specially developed
for use in petrol and diesel engines of VW passenger
cars and delivery vans with extended oil drainin
itervals. This oil is also applicable in those engines, where
the specifications as statedbelow are requested.
This oil is not applicable in those cases, where a VW-
Norm 503.01 is requested.
Lubrita Special Long Life V SAE 0W-30 meets the following
performance specifications:
ACEA A1/B1, A5/B5; VW 503.00/506.00/506.01
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,857
Viscosity -30 °C mPa.s 3100
Viscosity 40 °C mm 2 /s 55,30
Viscosity 100 °C mm²/s 10,10
Viscosity Index 174
Flash Point COC °C 226
Pour Point °C -50
Total Base Number mgKOH/g 10,2
Sulphate Ash % 1,28
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Special Life FE SAE 5W-20
Fuel-economy engine oil
ST-PVL-4008
Product Description and Benefits
The Lubrita Special Life FE 5W20 is a fuel-economy engine
oil specially developed to meet the requirements of the
latest Ford Ecoboost gasoline engines. It is developed using
the most recent additive technology in combination
with specially selected base oils with ahigh natural viscosity
index. This resulted in a well-balanced engine oil were
the following properties are obtained:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• reduced formation of combustion ashes
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
A fuel saving engine oil based on ‘Hydrocracked’ base oil
specially developed for the Ford Ecoboost gasoline engines.
This engine oil can also be used were an ACEAA1/
B1 or API SN product is recommended by the car manufacturer.
Health and Safety
Lubrita Special Life FE SAE 5W-20 meets the following
performance specifications:
API SN; ACEA A1/B1; Ford WSS-M2C948-B
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,851
Viscosity -30 °C mPa.s 4160
Viscosity 40 °C
mm 2 /s 42,60
Viscosity 100 °C mm²/s 7,85
Viscosity Index 157
Flash Point COC °C 218
Pour Point °C -36
Total Base Number mgKOH/g 7,7
Sulphate Ash % 0,78
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Pro Life SAE 10W-30
A modern universal fuel economy motor oil
NS-PVL-4023
Product Description and Benefits
This modern universal fuel economy motor oil is produced
with high quality solvent refined and synthetic
base oils that have a natural high viscosity index, to which
a well balanced choice of additives are added to obtain
the following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a fast cold start
• a very strong resistance against oxidation
• a safe lubrication film at high temperature
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal fuel economy motor oil is recommended
for use in petrol and diesel engines, with or without turbo-charging,
in passenger cars and delivery vans.
Lubrita Pro Life SAE 10W-30 meets the following performance
specifications:
ACEA A3/B4; API SM/CF; MB 229.1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,869
Viscosity -25 °C mPa.s 5070
Viscosity 40 °C mm 2 /s 74,90
Viscosity 100 °C mm²/s 11,80
Viscosity Index 153
Flash Point COC °C 218
Pour Point °C -36
Total Base Number mgKOH/g 8,3
Sulphate Ash % 1,08
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Pro Life SAE 10W-40
A modern, all-round motor oil
ST-PVL-4020
Product Description and Benefits
This modern, all-round motor oil based on high quality
solvent refined mineral and synthetic base oils. By adding
a well balanced choice of additives the following properties
are obtained:
• a lower fuel consumption
• a high and stable viscosity index
• a fast cold start
• a strong resistance against oxidation
• a very good detergency and dispersion
• a safe lubrication film at high temperatures
• a very strong protection against wear, corrosion and
foaming
• a very low oil consumption
Application
This all-round, fuel economy motor oil is recommended
for use in petrol and diesel engines, with or without
turbo-charging, in passenger cars and delivery vans. Thismotor
oil is developed for automobiles that ask a high
quality oil composition.
Lubrita Pro Life SAE 10W-40 meets the following performance
specifications:
ACEA A3/B4; API SL/CF; MB-229.1; VW 502.00/505.00
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,873
Viscosity -25 °C mPa.s 5560
Viscosity 40 °C mm 2 /s 96,00
Viscosity 100 °C mm²/s 14,30
Viscosity Index 154
Flash Point COC °C 224
Pour Point °C -30
Total Base Number mgKOH/g 8,2
Sulphate Ash % 1,08
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Pro Life SL SAE 10W-40
A modern universal fuel economy motor oil
ST-PVL-4021
Product Description and Benefits
This universal motor oil is produced with high quality solvent
refined and synthetic base oils that have a natural
high viscosity index, to which additives are added to obtain
the following properties:
• a high and stable viscosity index
• a fast cold start
• a strong resistance against oxidation
• a safe lubrication film at high temperature
• a good detergency and dispersion
• a strong protection against wear, corrosion and
foaming
Application
A universal motor oil, recommended for use in petroland
diesel engines, with or without turbo-charging, in
passenger cars and delivery vans.
Lubrita Pro Life SL SAE 10W-40 meets the following performance
specifications:
ACEA A3/B4; API SL/CF; MB 229.1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,864
Viscosity -25 °C mPa.s 6220
Viscosity 40 °C mm 2 /s 96,00
Viscosity 100 °C mm²/s 14,10
Viscosity Index 151
Flash Point COC °C 216
Pour Point °C -39
Total Base Number mgKOH/g 8,2
Sulphate Ash % 1,08
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Premium SF SAE 20W-50
High quality motor oil
ST-PVL-4028
Product Description and Benefits
This motor oil is produced with high quality solvent refined
base oils and a number of additives, to obtain the
following properties:
• a high detergency and dispersion power
• a strong resistance against oxidation
• effective in preventing from wear, corrosion and
foam
• a high and stable viscosity index
Application
Suitable lubricating oil for gasoline engines under light
service conditions, mor eover for diesel engines of passenger
cars and for light delivery vans in light service. Not
applicable for turbo-charging diesel engines for which a
minimum API CD level oil is required.
Lubrita Premium SF SAE 20W-50 meets the following
performance specifications:
API SF/CC; CCMC G2/D1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,884
Viscosity -15 °C mPa.s 8500
Viscosity 40 °C mm 2 /s 156,10
Viscosity 100 °C mm²/s 17,30
Viscosity Index 117
Flash Point COC °C 220
Pour Point °C -24
Total Base Number mgKOH/g 3,6
Sulphate Ash % 0,86
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Premium SF SAE 15W-40
High quality motor oil
ST-PVL-4025
Product Description and Benefits
A motor oil produced with high quality solvent refined
base oils and a number of additives, to obtain the following
properties:
• a high detergency and dispersion power
• a strong resistance against oxidation
• effective in preventing from wear, corrosion and
foam
• a high and stable viscosity index
Application
Suitable lubricating oil for gasoline engines under light
service conditions and in all seasons. Moreover, for diesel
engines passenger cars and light delivery vans in light service.
Not applicable for turbo-charging diesel engines for
which a minimum API CD is required.
Lubrita Premium SF SAE 15W-40 meets the following
performance specifications:
API SF/CC; CCMC G2/D1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,876
Viscosity -20 °C mPa.s 6300
Viscosity 40 °C mm 2 /s 103,40
Viscosity 100 °C mm²/s 14,00
Viscosity Index 137
Flash Point COC °C 210
Pour Point °C -32
Total Base Number mgKOH/g 3,6
Sulphate Ash % 0,86
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Premium SG SAE 15W-40
A multifunctional motor oil
ST-PVL-4026
Product Description and Benefits
A multifunctional motor oil, produced with high quality
solvent refined base oils andadditives to obtain the following
properties:
• a very strong detergency and dispersion power
• a very strong resistance against oxidation
• a very strong protection against wear
• an excellent protection against corrosion and foaming
• a high and stable viscosity index
• no negative effect on exhaust gas catalyst
Application
A multifunctional motor oil, recommended for use in
petrol, diesel and LPG engines, with or without turbocharging,
in passenger cars and delivery vans with the
specifications as stated below.
Lubrita Premium SG SAE 15W-40 meets the following
performance specifications:
API SG/CD; CCMC G4
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,878
Viscosity -20 °C mPa.s 6300
Viscosity 40 °C mm 2 /s 101,40
Viscosity 100 °C mm²/s 13,80
Viscosity Index 137
Flash Point COC °C 220
Pour Point °C -26
Total Base Number mgKOH/g 6,3
Sulphate Ash % 0,84
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Passenger vehicle engine oils
Lubrita Premium SL SAE 15W-40
A modern multifunctional motor oil
ST-PVL-4027
Product Description and Benefits
A modern multifunctional motor oil, produced with high
quality solvent refined base oils and modern additives to
obtain the following properties:
• a very strong detergency and dispersion power
• a very strong resistance against oxidation
• a very strong protection against wear
• a strong protection against corrosion and foaming
• a high and stable viscosity index
• a low tendency to evaporation
Application
This modern multifunctional motor oil is recommended
for use in petrol, diesel and LPG engines, with or without
turbo-charging, in passenger cars and delivery vans.
Lubrita Premium SL SAE 15W-40 meets the following
performance specifications:
ACEA A3/B4; API SL/CF; MB-29.1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,878
Viscosity -20 °C mPa.s 6600
Viscosity 40 °C mm 2 /s 96,07
Viscosity 100 °C mm²/s 14,00
Viscosity Index 143
Flash Point COC °C 222
Pour Point °C -24
Total Base Number mgKOH/g 8,3
Sulphate Ash % 1,08
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Brake fluids
Lubrita Brake Fluid DOT 3
Synthetic brake fluid
Product Description and Benefits
A synthetic brake fluid having the following properties:
• a good restance against ageing
• a very good compatibility with seals and gaskets
• minimal corrosion tendency
• optimal viscosity at low temperatures
Application
Applicable for all hydraulic brake systems with drum or
disk brakes requiring a synthetic brake fluid type and
where a brake fluid of the type DOT 3 is prescribed.
Lubrita Brake Fluid DOT 3 meets the following performance
specifications:
SAE J 1703 (jan 80); FMVSS DOT 3
Typical Analysis
Property Unit Typical Value
Density at 20°C kg/l 1,030
Viscosity -40 °C mm 2 /s 1300
Viscosity 100 °C mm²/s 2,00
Flash Point PM °C 150
Boiling Point (reflux) °C 237
Wet Boiling Point °C 145
pH - 50% in
ethanolsolution
10,0
ST-BRK-4276
Available packages
1000 L, 208 L, 20 L, 1 L.
Lubrita Brake Fluid DOT 4
Synthetic brake fluid
Product Description and Benefits
A synthetic brake fluid having the following properties:
• a good restance against ageing
• a very good compatibility with seals and gaskets
• minimal corrosion tendency
• high wet boiling point
• optimal viscosity at low temperatures
Application
Applicable for all hydraulic brake systems with drum or
disk brakes requiring a synthetic brake fluid and where a
brake fluid of the type DOT 4 is prescribed.
Lubrita Brake Fluid DOT 4 meets the following performance
specifications:
SAE J 1703; FMVSS DOT 4
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 1,030
Viscosity -40 °C mm 2 /s 1200
Viscosity 100 °C mm²/s 2,30
Boiling Point
(reflux)
°C 263
Wet Boiling Point °C 168
pH - 50% in
ethanolsolution
8,0
ST-BRK-4277
Available packages
1000 L, 208 L, 20 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Brake fluids
Lubrita Brake Fluid DOT 5.1
Synthetic brake fluid
Product Description and Benefits
A synthetic brake fluid having the following properties:
• a good restnce against ageing
• a very good compatibility with seals and gaskets
• minimal corrosion tendency
• high wet boiling point
• optimal viscosity at low temperatures
• mixable with DOT 3 and DOT 4
Application
Applicable for all hydraulic brake systems with drum or
disk brakes requiring a synthetic brake fluid and where a
brake fluid of the type DOT 5.1 is prescribed. This brake
fluid is extremely well applicable if high brake system
temperatures are to be considered and if very low temperatures
in combination with ABS-systems are to be expected.
Also very suitable for application in motorcycles.
Lubrita Brake Fluid DOT 5.1 meets the following performance
specifications:
SAE J 1703; FMVSS DOT 5.1
Typical Analysis
Property Unit Typical Value
Density at 20°C kg/l 1,052
Viscosity -40 °C mm 2 /s 850
Viscosity 100 °C mm²/s 1,70
Flash Point PM °C 150
Boiling Point (reflux) °C 263
Wet Boiling Point °C 190
pH - 50% in
ethanolsolution
8,5
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-BRK-4278
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automatic transmission fluids
Lubrita Dexron IID
Very high graded automatic transmission fluid
Product Description and Benefits
Very high graded automatic transmission fluid formulated
with solvent refined base oils and a number of selected
additives to obtain the following properties:
• high and stable viscosity index
• very low pour point
• very good stability against oxidation
• positive activity against wear, corrosion and foam
• specific friction properties
• perfect compatibility with seals and non-ferro metals
• red coloured
Application
This fluid may be used for automatic gearboxes, power
steering units, torque converters and other equipment,
for which an ATF Dexron IID fluid is required.
Lubrita Dexron IID meets the following performance
specifications:
GM Dexron IID, MB-236.7, MAN 339 Typ Z1.
Meets the requirements of ZF TE-ML 09/11A/14A,
Allison C4, Ford SQM-2C9010-A, Voith G607, Cat TO-2,
Renk, Ford M2C138-CJ/166-H, Mercon
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,872
Viscosity 40 °C mm 2 /s 43,20
Viscosity 100 °C mm²/s 8,25
Viscosity Index 168
Flash Point COC °C 198
Pour Point °C -45
Total Base Number mgKOH/g 2,6
Sulphate Ash % 0,18
ST-ATF-4108
Available packages
1000 L, 208 L, 20 L, 1 L.
Lubrita Dexron IIIG
Very high graded automatic transmission fluid
Product Description and Benefits
Very high graded automatic transmission fluid formulated
with solvent refined base oils and a number of selected
additives to obtain the following properties:
• a very high and stable viscosity index
• a very low pour point
• very good stability against oxidation
• a positive activity against wear, corrosion and foam
• specific friction properties
• a perfect compatibility with seals and non-ferro metals
• red coloured
Application
This fluid may be used for automatic gear boxes, power
steering units, torque converters and other equipment,
for which an ATF Dexron IIIF, IIIG and/or IIIH fluid is required.
Lubrita Dexron IIIG meets the following performance
specifications:
Dexron IIIG (performance level IIIH), MB-236.1, MAN
339 Typ Z1/V1, ZF TE-ML 04D/14A, Allison C4.
Meets the requirements of Ford Mercon, Cat TO-2,
ZF TE-ML 02F/03D/09/11B/17C, Voith 55.6335, Volvo
97341
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,865
Viscosity 40 °C mm 2 /s 37,30
Viscosity 100 °C mm²/s 7,96
Viscosity Index 193
Flash Point COC °C 188
Pour Point °C -45
Total Base Number mgKOH/g 2,5
Sulphate Ash % 0,06
ST-ATF-4109
Available packages
1000 L, 208 L, 20 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automatic transmission fluids
Lubrita Dexron SX-VI
A very high graded automatic transmission fluid
Product Description and Benefits
A very high graded automatic transmission fluid formulated
with solvent refined base oils and a number of selected
additives to obtain the following properties:
• a very strong dispersion, therefore sludge is restricted
to a minimum
• a very low pour point
• very good stability against oxidation and thermal
properties
• a positive activity against wear, corrosion and foam
• specific friction properties
• a perfect compatibility with seals and non-ferro metals
• longer life time of the liquid
• exceeds the properties of Dexron III and II liquids
• red coloured
Application
This fluid may be used for automatic gear boxes, power
steering units, torque converters and other equipment,
for which an ATF is required, which exceeds ATF Dexron III
and II. Its special composition causes a longer lifetime of
this liquid compared with older Dexron types.
Lubrita Dexron SX-VI meets the following performance
specifications:
Dexron VI (level); MB 236.41
Typical Analysis
Property Unit Typical Value
Colour
ROOD
Density at 15°C kg/l 0,847
Viscosity 40 °C mm 2 /s 29,80
Viscosity 100 °C mm²/s 6,00
Viscosity Index 151
Flash Point PM °C 180
Flash Point COC °C 206
Pour Point °C -54
Total Base Number mgKOH/g 2,0
Sulphate Ash % 0,02
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-ATF-4110
Lubrita ATF SP-MB
A very high graded automatic transmission fluid
Product Description and Benefits
A very high graded automatic transmission fluid formulated
with selected HVI base oils and a number of selected
additives to obtain the following properties:
• a high shifting comfort
• a very low pour point
• very good stability against oxidation and thermal
properties
• a positive activity against wear, corrosion and foam
• a constant friction stability over lifetime ensuring
perfect clutch operation
• a perfect compatibility with seals and non-ferro metals
• extremely resistant against shudder vibration
• as a result of the perfect viscosity grade a remarkable
fuel-efficiency potential
• red coloured
Application
This fluid may be used for Mercedes Benz automatic
transmissions. This product is backward compatible to
products fulfilling the requirements of MB 236.12.
Lubrita ATF SP-MB meets the following performance
specifications:
MB 236.14; Ssang Yong (MB-Automatic transmissions)
Typical Analysis
Property Unit Typical Value
Colour
ROOD
Density at 15°C kg/l 0,850
Viscosity -40 °C mm 2 /s 8500
Viscosity 40 °C mm 2 /s 29,60
Viscosity 100 °C mm²/s 6,50
Viscosity Index 185
Flash Point COC °C 200
Pour Point °C -51
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-ATF-4111
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automatic transmission fluids
Lubrita ATF SPR-JP
Synthetic automatic transmission fluid
Product Description and Benefits
A synthetic automatic transmission fluid, based on synthetic
base oils, formulated with special friction modifiers
to obtain the following properties:
• a very high and stable viscosity index
• a very low pour point
• an excellent stability against oxidation
• a positive activity against wear, corrosion and foam
• specific friction properties and consequently low
noise and smooth switching
• compatible with synthetic seals
• a quick oil provision at cold start conditions
Application
This fluid may be used for automatic transmissions, which
are applied in several Japanese cars with before mentioned
specifications. It is recommended to follow the
instructions of the manufacturer.
Lubrita ATF SPR-JP meets the following performance
specifications:
Toyota T/T-II/T-III/T-IV/D-II/D-III/WS; Nissan Matic Fluid
C/D/J; Honda Ultra II/Ultra Z-1/Ultra HMMF; Mazda
M-III/D-II/M-V/F-1; Mitsubishi SP-II/SP-III/ATF-II/ATF-
SK; Hyundai ATF SP-IV (suitable for use); Suzuki ATF Oil/
ATF Oil Special; Subaru ATF, Kia, Isuzu Besco ATF II/III;
Daihatsu Alumix ATF Multi; GM IID/III, TASA; Mercon,
Allison C4; JWS 3309/3317 (suitable for use); JASO M
315 Type 1A; MB 236.6/236.7/236.8 (suitable for use);
MB 236.9/236.10 (suitable for use); BMW 7045E (suitable
for use); Chrysler ATF/ATF +3/ATF +4 (suitable for
use); VW/Audi G-055-025-AZ
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,846
Viscosity 40 °C mm 2 /s 36,60
Viscosity 100 °C mm²/s 7,20
Viscosity Index 165
Flash Point COC °C 212
Pour Point °C -48
Total Base Number mgKOH/g 2,7
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-ATF-4112
Lubrita ATF Dexron III SP-JP
Synthetic automatic transmission fluid
Product Description and Benefits
A synthetic automatic transmission fluid formulated with
a number of special additives to obtain the following
properties:
• a very high and stable viscosity index
• a very low pour point
• an excellent stability against oxidation
• a positive activity against wear, corrosion and foam
• specific friction properties and consequently low
noise
• suitable for Japanese automatic transmissions
• a quick oil provision at cold start conditions
Application
This fluid may be used for automatic gear boxes, torque
converters and other equipment of Japanese OEM’s, for
which an ATF Dexron IIIG fluid is required.
Lubrita ATF Dexron III SP-JP meets the following performance
specifications:
Dexron III (level); Allison C-4 (level); Jaso 1A; Nissan
(level); Subaru; Toyota (T-4 ATF’s)
Typical Analysis
Property Unit Typical Value
Colour
ROOD
Density at 15°C kg/l 0,860
Viscosity 40 °C mm 2 /s 33,00
Viscosity 100 °C mm²/s 6,50
Flash Point COC °C 186
Pour Point °C -40
Acid number mgKOH/g 1,73
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-ATF-4113
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automatic transmission fluids
Lubrita ATF Ford
High grade automatic transmission fluid
Product Description and Benefits
A high grade automatic transmission fluid formulated
with solvent refined base oils and a number of selected
additives to obtain the following properties:
• a high and stable viscosity index
• a very low pour point
• a good stability against oxidation
• a positive activity against wear, corrosion and foam
• specific friction properties
• a perfect compatibility with seals and non-ferro metals
• red colour
Application
Applicable for all automatic transmissions, power steering
units and torque converters, for which an ATF type
Ford is required.
Lubrita ATF Ford meets the following performance specifications:
Ford M2C33-F/G; Borg Warner; Ford M2C9007-AA
Typical Analysis
Property Unit Typical Value
Colour
ROOD
Density at 15°C kg/l 0,872
Viscosity 40 °C mm 2 /s 34,90
Viscosity 100 °C mm²/s 7,21
Viscosity Index 177
Flash Point COC °C 195
Pour Point °C -41
Total Base Number mgKOH/g 1,0
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-ATF-4114
Lubrita MCVTF
High performance synthetic fluid
Product Description and Benefits
A high performance synthetic fluid for modern continuously
variable transmissions, based on synthetic base oils,
formulated with special additives to obtain the following
properties:
• a very high and stable viscosity index
• a very low pour point
• an excellent stability against oxidation
• a positive activity against wear, corrosion and foam
• ideal friction performance, for both CVT belt and CVT
chain
• seal compatibility for better leakage prevention
• high superior anti-shudder performance
• extended service interval in combination with a longer
transmission life
Application
This high quality synthetic fluid is designed for application
in continuously variable automatic gear boxes. The
so called CVT’s.
Lubrita MCVTF meets the following performance specifications:
Toyota CVTF TC/FE, Nissan NS-1/NS-2; Honda HMMF/
HCF2, Mitsubishi SP-III/CVTF-J1; Subaru ECVT/iCVT,
Daihatsu Ammix CVT; Suzuki CVTF TC/NS-2/CVT Green
1; Hyundai SP-III, Chrysler Jeep NS-2; BMW Mini
83220136376/83220429159; MB 236.20, Ford WSS-
M2C928-A; VW G 052 180/G 052 516; JASO M358,
Mopar CVTF+4
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,848
Viscosity 40 °C mm 2 /s 38,00
Viscosity 100 °C mm²/s 181
Flash Point COC °C 214
Pour Point °C -48
Total Base Number mgKOH/g 3,6
Available packages
1000 L, 208 L, 20 L, 1 L.
ST-ATF-4115
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automatic transmission fluids
Lubrita MDCTF
Synthetic all purpose dual clutch transmission fluid
Product Description and Benefits
A synthetic all purpose dual clutch transmission fluid,
based on high grade synthetic base oils in combination
with optimized additive components to obtain the following
properties:
• a very high and stable viscosity index
• a very low pour point
• an excellent stability against oxidation
• a positive activity against wear, corrosion and foam
• specific friction properties and durable, reliable
clutch performance
• compatible with synthetic seals
Application
This dual clutch transmission fluid is developed to fulfill
the highest demands of modern high tech dual clutch
transmissions and is particularly suitable for transmissions
were dual clutch, synchronizer, gear set and hydraulic
control system operate with the same fluid.
Lubrita MDCTF meets the following performance specifications:
VW ATF DSG
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,850
Viscosity 40 °C mm 2 /s 38,00
Viscosity 100 °C mm²/s 7,50
Viscosity Index 170
Pour Point °C -50
Available packages
1000 L, 208 L, 20 L, 1 L.
ST-ATF-4116
Lubrita PSF
Special hydraulic fluid
Product Description and Benefits
This is a special hydraulic fluid based on very special advanced
base oils to which special additives have been
added in order to obtain the following unique properties:
• a exceptional high viscosity index (>300!), obtaining
a very positive viscosity development
• a very low pour point
• very strong anti-foaming properties
• a good compatibility with seals
Application
This special hydraulic fluid is used as a hydraulic agent in
very different hydraulic systems, such as power steering
systems, leveling sytems, hydraulic pneumatic spring systems,
shock absorbing devices, hydrostatic driving gears,
ABS/ASR and ASC systems, hydraulically controlled couplings
and electro-hydraulic folding roof control systems,
etc.
Lubrita PSF meets the following performance specifications:
VW TL 52146, MAN M 3289; PSA S712710, MB 345.0;
Volvo STD 1273,36; DIN 51524-T3, ISO 7308
Typical Analysis
Property Unit Typical Value
Colour
GROEN
Density at 15°C kg/l 0,829
Viscosity -20 °C mm 2 /s 230
Viscosity 40 °C mm 2 /s 18,70
Viscosity 100 °C mm²/s 6,00
Viscosity Index > 300
Flash Point COC °C 154
Pour Point °C -55
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-ATF-4117
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automatic transmission fluids
Lubrita LHM
Special type of hydraulic fluid
Product Description and Benefits
A special type of hydraulic fluid, based on selected baseoils
and additives to obtain the following properties:
• an extremely high and stable viscosity index
• a very low pour point
• a neutral behaviour towards oil-proof seals
• strong foam-inhibiting properties
• not hygroscopic
Application
This hydraulic oil has been especially developed for application
in brake systems and hydraulic controlled clutches
in a number of Citroën cars. Also suitable for certain industrial
hydraulic systems, where anti-wear properties
are required.
Lubrita LHM meets the following performance specifications:
Citroën
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,840
Viscosity -40 °C mm 2 /s 1150
Viscosity 40 °C mm 2 /s 18,00
Viscosity 100 °C mm²/s 6,30
Viscosity Index 353
Flash Point COC °C 105
Pour Point °C

Automotive gear oils
Lubrita Unitrans S Gear Oil 75W-80
Universal full-synthetic gear oil
Product Description and Benefits
This gear oil is an universal full-synthetic gear oil based on
high quality synthetic base oils and special EP-additives to
obtain the following properties:
• an excellent activity against high temperature load
• a very strong activity against wear, corrosion and
foam
• a low pour point
• very special extreme pressure properties
• widely usable
Application
This universal gear oil is developed for manual transmissions
and hypoid differentials in passenger cars, delivery
vans and heavy trucks. This so called “Total Drive Line” oil
is as universal product widely usable.
Lubrita Unitrans S Gear Oil 75W-80 meets the following
performance specifications:
API GL-4/GL-5/MT-1; Mil-L-2105A/B/C/D/Mil-PRF-
2105E, SAEJ2360; ZF TE-ML 02B/17B
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,849
Viscosity 40 °C mm 2 /s 38,30
Viscosity 100 °C mm²/s 7,31
Viscosity Index 159
Flash Point COC °C 194
Pour Point °C -60
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-AGO-4089
Lubrita Unitrans S Gear Oil 75W-90
Universal full-synthetic gear oil
Product Description and Benefits
This gear oil is an universal full-synthetic gear oil based on
high quality synthetic base oils and special EP-additives to
obtain the following properties:
• an excellent activity against high temperature load
• a very strong activity against wear, corrosion and
foam
• a low pour point
• very special extreme pressure properties
• widely usable
Lubrita Unitrans S Gear Oil 75W-90 meets the following
performance specifications:
API GL-3/GL-4/GL-5/MT-1; Mil-L-2105D/Mil-PRF-2105E,
SAE J2360; MB-Approval 235.8, MAN 341 Typ Z2/E3,
342 Typ M3; ZF TE-ML 02B/05B/07A/12L/12N/16F/17
B/19C/21B; Scania STO 1:0; DAF, Iveco, Eaton Europe;
Volvo 97312; Mack GO-J, ArvinMeritor 076-N; Ford
M2C200-B/C, ZF TE-ML 08; MAN 3343 Typ S
Typical Analysis
ST-AGO-4090
Application
This universal gear oil is developed for manual transmissions
and hypoid differentials in passenger cars, delivery
vans and heavy trucks. This so called “Total Drive Line” oil
is as universal product widely usable.
Property Unit Typical Value
Density at 15°C kg/l 0,868
Viscosity 40 °C mm 2 /s 101,00
Viscosity 100 °C mm²/s 15,40
Viscosity Index 161
Flash Point COC °C 202
Pour Point °C -50
Total Base Number mgKOH/g 2,1
Available packages
1000 L, 208 L, 20 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automotive gear oils
Lubrita Unitrans S Gear Oil LS 75W-90
Universal full-synthetic gear oil
Product Description and Benefits
This gear oil is an universal full-synthetic gear oil based on
high quality synthetic base oils and special EP-additives to
obtain the following properties:
• an excellent activity against high temperature load
• a very strong activity against wear, corrosion and
foam
• a low pour point
• very special EP-properties
• excellent “Limited Slip” properties
• widely usable
Application
This universal gear oil is developed for manual transmissions
and hypoid differentials in passenger cars, delivery
vans and heavy trucks. This so called “Total Drive Line” oil
is as universal product widely usable. This product also
contains excellent “Limited Slip” properties.
Lubrita Unitrans S Gear Oil LS 75W-90 meets the following
performance specifications:
API GL-4/GL-5/MT-1; Mil-L-2105A/B/C/D/E; MAN
3343 Typ S; Scania STO 1:0; Volvo 97310; ZF TE-ML
02B/05C/07A/12B/16F/17B/19C/21C
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,869
Viscosity 40 °C mm 2 /s 116,20
Viscosity 100 °C mm²/s 16,30
Viscosity Index 150
Flash Point COC °C 202
Pour Point °C -50
Total Base Number mgKOH/g 2,1
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-AGO-4095
Lubrita Unitrans Gear Oil LS 80W-90
Universal gear oil
Product Description and Benefits
This gear oil is an universal gear oil based on high quality
solvent refined base oils and special EP-additives to obtain
the following properties:
• an excellent activity against high temperature load
• a very strong activity against wear, corrosion and
foam
• a low pour point
• very special EP-properties
• excellent “Limited Slip” properties
• widely usable
Application
This universal gear oil is developed for manual transmissions
and hypoid differentials in passenger cars, delivery
vans and heavy trucks. This so called “Total Drive Line” oil
is as universal product widely usable. This product also
contains excellent “Limited Slip” properties.
Lubrita Unitrans Gear Oil LS 80W-90 meets the following
performance specifications:
API GL-3/GL-4/GL-5/MT-1; Mil-L-2105A/B/C/D/E,
Mil-PRF-2105E; MAN 341 Typ Z2/E2, MAN 342 Typ M2;
Scania STO 1:0; ZF TE-ML 05C/07A/08/12C/16E
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,901
Viscosity 40 °C mm 2 /s 143,00
Viscosity 100 °C mm²/s 14,80
Viscosity Index 103
Flash Point COC °C 204
Pour Point °C -36
Available packages
1000 L, 208 L, 20 L, 1 L.
NS-AGO-4096
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

Automotive gear oils
Lubrita Unitrans S Gear Oil 80W-90
Universal semi-synthetic gear oil
Product Description and Benefits
This gear oil is a universal semi-synthetic gear oil based
on high quality solvent refined and synthetic base oils and
special EP-additives to obtain the following properties:
• an excellent activity against high temperature load
• a very strong activity against wear, corrosion and
foam
• a low pour point
• very special EP-properties
• widely usable
Application
This is a universal gear oil, special developed for manual
transmissions and hypoid differentials in passenger cars,
delivery vans and heavy trucks. This so called “Total Drive
Line” oil is as universal product very widely usable.
Lubrita Unitrans S Gear Oil 80W-90 meets the following
performance specifications:
API GL-3/GL-4/GL-5/MT-1; Mil-L-2105A/B/C/D/E,
Mil-PRF-2105E; DAF; MAN 341 Typ Z2/E2; Scania
STO 1:0; ZF TE-ML 02B/05A/07A/08/12E; ZF TE-ML
16B/16C/16D/17B/19B/21A; MB 235.0; Mack GO-J;
Iveco
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,883
Viscosity 40 °C mm 2 /s 125,80
Viscosity 100 °C mm²/s 15,00
Viscosity Index 122
Flash Point COC °C 234
Pour Point °C -35
ST-AGO-4093
Available packages
1000 L, 208 L, 20 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com

LUBRITA LUBRICANTS
Designed For High Efficiency