Lubrita Motor Oils

Passenger vehicle engine oils
Lubrita Go Life FE SAE 0W-20
A fuel economy motor oil
NS-PVL-4005
Product Description and Benefits
A fuel economy motor oil, developed according the most
recent technology, based on specially selected synthetic
base oils and a well balanced choice of advanced additives
to obtain the following properties:
• a lower fuel consumption
• a high and stable viscosity index
• a good resistance against shearing
• a fast cold start, even at very low temperatures
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion power
• a very strong protection against wear, corrosion and
foaming
Application
This fuel economy, specially composed motor oil, is recommended
for use in petrol anddiesel engines, with or
without turbo-charging, in passenger cars and delivery
vans.Due to its special composition, this product may
well be applied to very lowtemperatures, such as under
arctic conditions may occur.
Lubrita Go Life FE SAE 0W-20 meets the following performance
specifications:
API SN/CF; ACEA A1/B1
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,846
Viscosity -35 °C mPa.s 5320
Viscosity 40 °C mm 2 /s 46,70
Viscosity 100 °C mm²/s 8,54
Viscosity Index 162
Flash Point COC °C 230
Pour Point °C -48
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Go Life SAE 0W-30
Sophisticated fully synthetic fuel economy universal motor oil
NS-PVL-4006
Product Description and Benefits
This sophisticated fully synthetic fuel economy universal
motor oil is produced with high quality synthetic base oils
with a high viscosity index and a well-balanced choice of
advanced additives to obtain the following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal fuel economy synthetic motor oil is recommended
for use in petrol and diesel engines, with
or witout turbo charging, in passenger cars and delivery
vans with the specifications as stated below.
Lubrita Go Life SAE 0W-30 meets the following performance
specifications:
API SM/CF; ACEA A3/B4; MB 229.3; VW 502.00/505.00;
BMW Longlife-98; Renault RN0700
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,848
Viscosity -35 °C mPa.s 5400
Viscosity 40 °C mm 2 /s 56,60
Viscosity 100 °C mm²/s 10,20
Viscosity Index 170
Flash Point COC °C 230
Pour Point °C -51
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com