Lubrita Motor Oils

Passenger vehicle engine oils
Lubrita Go Life SAE 0W-40
Universal fully synthetic fuel economy motor oil
ST-PVL-4007
Product Description and Benefits
A nowadays universal fully synthetic fuel economy motor
oil produced with high quality synthetic base oils and a
well balanced choice of advanced additives to obtain the
following properties:
• a lower fuel consumption
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
This universal fuel economy synthetic motor oil is recommended
for use in petrol and diesel engines, with or without
turbo charging, in passenger cars and delivery vans
with the specifications as stated below. Its low viscosity
enables the application of this motor oil under extreme
conditions.
Lubrita Go Life SAE 0W-40 meets the following performance
specifications:
API SM/CF; ACEA A3/B4; MB 229.3; VW 502.00/505.00;
BMW Longlife-01; Renault RN0700/RN0710; Porsche
A40
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,846
Viscosity -35 °C mPa.s 6000
Viscosity 40 °C mm 2 /s 83,70
Viscosity 100 °C mm²/s 14,00
Viscosity Index 173
Flash Point COC °C 232
Pour Point °C -46
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Lubrita Go Life SAE 5W-40
An extreme modern, synthetic, fuel economy, universal motor oil
ST-PVL-4018
Product Description and Benefits
An extreme modern, synthetic, universal motor oil based
on special selected synthetic base oils with a high viscosity
index and a well balanced choice of advanced additives
to obtain the following properties:
• a high and very stable viscosity index
• a high resistance against shearing
• a fast cold start
• a very strong resistance against oxidation
• a safe lubrication film at very high temperatures
• a very good detergency and dispersion
• a very strong protection against wear, corrosion and
foaming
Application
A universal, special composed synthetic motor oil recommended
for use in petrol and diesel engines, with or without
turbo-charging, in passenger cars and delivery vans
for which the most modern specifications are required.
Lubrita Go Life SAE 5W-40 meets the following performance
specifications:
ACEA A3/B4; API SN/CF; VW 502.00/505.00; MB
229.3/226.5; PSA specification B71 2296; Porsche A40;
BMW Longlife-01; Renault RN0700/RN0710; GM LL-B-
025; Fiat 9.55535-M2
Typical Analysis
Property Unit Typical Value
Density at 15°C kg/l 0,858
Viscosity -30 °C mPa.s 6110
Viscosity 40 °C mm 2 /s 87,40
Viscosity 100 °C mm²/s 14,40
Viscosity Index 172
Flash Point COC °C 223
Pour Point °C -33
Total Base Number mgKOH/g 9,7
Sulphate Ash % 1,22
Available packages
1000 L, 208 L, 60 L, 20 L, 5 L, 4 L, 1 L.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
More information available:
Information revised date: 2014 10 30
web page: www.lubrita.com
e-mail: info@lubrita.com