FORESTRY - Commercial Solutions Inc

ELKE HUGHES 

FORESTRY 

Vests 40 - 41 

Treeplanting 41 - 43 

Silviculture 44 

Boots 45 

Firefighting 46 - 47 

Axes and Accessories 46 - 48 

Hand Tools 49 

Mapping Aids 50 - 52

CRUISER PRO 1000 VESTS 

• High wear areas are reinforced with a double layer of fabric 

• Interior seams are serged and exterior seams are taped for extra resistance to fraying 

and general wear and tear 

• Exceeds the current WCB standard for B.C. as well as many other safety regulations in 

North America 

• Large, gusseted back pouch and front outside pockets with full-length 

Velcro ® fastening 

• Five tie-on grommets and two lower side grommets 

• Available with or without 3M Scotchlite reflective tape in 2” high gloss fluorescent 

lime yellow 

• Reflective striping exceeds 210 square inches with 360˚ visibility 

• 13 pockets including: 

(4) inside pockets 

Ample pen/pencil/felt marker slots 

Full-back, heavy-duty zippered pocket 

Lower inside pockets which are big enough for air photo clipboard or spray paint 

Cruiser Pro Fabrics 

10 oz. Cotton Duck 

Tough yet comfortable, with water, 

mildew and rot resistant coating 

1000 Denier Cordura ® 

Hardwearing, extremely durable, water 

repellent and colourfast 

Red Cotton w/ Reflective Trim 

Red Cotton PLAIN 

WOE 13363 

WOE 13362 

WOE 13361 

WOE 13364 

WOE 13365 

WOE 29076 

Small 

Medium 

Large 

X Large 

XX Large 

XXX Large 

WOE 13360 

WOE 13359 

WOE 13366 

WOE 13367 

Medium 

Large 

X Large 

XX Large 

Orange Cotton w/ Reflective Trim 

Orange Cotton PLAIN 


WOE 13376 Small 

WOE 13371 Medium 

WOE 13372 Large 

WOE 13373 X Large 

WOE 13374 XX Large 

WOE 13378 XXX Large 

Red Cordura W/ REFLECTIVE TRIM 





Desert Tan Cotton PLAIN 

www.csinet.ca 

40 





RED CORDURA PLAIN 









Green Cotton PLAIN 




WOE 13310 XX Large

FIBREGLASS Shaft 

• 50% stronger than wood, lighter and easier 

to shorten 

• Compatible with all Bushpro handles 

and blades 

BUP PC305 

Internal 

Reflective VestS 

• Takes the load off shoulders and back and 

distributes it evenly 

• Made of the same high quality Cordura as 

the Cruiser Pro 1000 with reflective stripes 

WOE 13416 

WOE 13417 

WOE 13418 

WOE 13419 

Medium 

Large 

X Large 

XX Large 

TreePlanter SHOVELS 

• Classic shape of the treeplanter blade 

• Suitable for a wide range of tree and root sizes 

• Blade is 10-7/8” in length 

BUP PC110 

BUP PC120 

BUP PC130 

Wood shaft 

Fibreglass shaft, D-handle 

Staff handle 

shock absorbing handle 

• Works by allowing the grip to move vertically 

on top of two rubber cushions 

• Reduces the strain on user’s wrist, elbow 

and shoulders 

• Helps reduce the amount of vibration and 

impact sting 

• Recommended by physiotherapists 

BUP PC330 

D-Handle 

• Grip is sturdy and cushioned to take off the 

edge when slamming into rock 

HIBALLER SHOVELs 

• Fibreglass shaft 

• Forged blade for superior strength and life 

• 4-1/4” x 8-1/2” 

BUP PC220 

BUP PC220SAH 

D-handle 

S.A handle 

BUP PC320 

Staff Handle 

• Handle will fit in treeplanter and hiballer blades 

BUP PC325 

TreePlanting BagS 

• Highly adjustable harness system 

• Padded shoulder and waist belts 

• Adjustable bucket position for small, medium 

and large waists 

• Rear bucket contains several pockets and a 

skirt closure to keep your contents clean 

and dry 

BUP PC020 

BUP PC025 

BUP PC030 

BUP PC035 

BUP PC040 

Three pouch component bag (bolt-on) 

Harness system without buckets 

Replacement component bucket 

Replacement shoulder straps 

Replacement padded hip belt 

HIBALLER SHOVELs 

• Steel shaft 

• Lightweight 

• 4-1/4” x 9” 

• Kickplate strictly on planter side 

• Crank and offset for easy use 

BUP PC290 D-handle S.S blade 

BUP PC290SAH S.A handle S.S blade 

BUP PC291 D-handle C.S blade 

BUP PC291SAH S.A handle C.S blade 

HiBaller shovelS 

• Hiballer blade which is designed to be 

stronger and wear slower than a 

traditional shovel 

• Blade is 10-7/8” in length 

BUP PC220 

BUP PC230 

BUP PC290 

BUP PC291 

Fibreglass shaft 

Wooden shaft 

Stainless steel shaft 

Carbon steel shaft 


1-888-522-9822 

41

Multipot Adapter 

• Up to three multipot adapters can be 

attached to Bushpro harnesses 

Four Bucket 

treeplanting bag 

• Contains four large buckets 

BUP PC050 

BUP PC070 

Attachment Kit 

• Stake bag and harness system that will 

convert late-model Bushpro three bucket 

treeplanting bags to a stake bag 

BUP PC060 

Single Planting Bag 

• Belt strap 

• Shoulder strap 

WOE 23413 18” x 12” 

Fertilizer Bag 

• Pouches attach directly to planting bags 

• Attach more than one to keep different 

fertilizers separate 

tape flag cutter 

• Can be mounted in any location on 

the shovel 

• Works like a dental floss cutter – after a piece 

of flagging tape is cut, it’s held in position and 

allows the user to easily grab the next piece 

BUP PC350 

BUP PC065 

HI-VIS ADD-ON PLANT BAG 

BUP PC530 

kickplate cushion 

• Rubber cushion that bolts onto the kick plates 

of most Bushpro shovels 

• Designed to help reduce jarring on lower 

limbs and wear on boots 

BUP PC360 

DIBBLE SHAFT 

• Designed to accept a wide range of dibble 

heads (core extractors) 

• Comes with a steel shaft 

BUP PC410 W/ cushion D handle 

BUP PC410SAH W/ shock absorbing handle 

www.csinet.ca 


42 

Stake Bag Combo System 

• Designed for planters who have to carry 

stakes or tubing 

• Can convert to a normal set of 

treeplanting bags 

• Complete package includes a fully assembled 

stake bag, replacement harness and rear 

bucket for conversion to traditional 

treeplanting bags 

BUP PC055 

DIBBLE HEADS 

• Tool commonly used for planting seedlings 

• Heads are extremely strong 

• Composed of carburized steel, case hardened 

and heat treated to Rockwell C 42-45 

BUP PC400 #45 head 5-7/8” x 1-5/8” 

BUP PC401 #67 long head 5-1/2” x 1-3/8” 

BUP PC402 #67 short head 4” x 1-3/8” 

BUP PC403 Jiffy head 3-5/8” x 1-1/4” 

BUP PC404 Jiffy 30mm 4-1/2” x 1-5/8”

Silvicool Liner Sac 

• Designed to be put inside the planting bag as 

a liner to keep seedlings cool 

• Drawstring opening for ease of seedling 

removal and storage 

BUP PC705 

Broadcast Spreader 

• Commercial grade, 100 lb. rustproof hopper 

• Height adjustable handle 

• 13” pneumatic tires on rustproof rims 

• Super duty gear box 

• EV-N-Spred ® three hole drop system 

• Assembly required 

EWP 2170SU 

Silvicool III Standard 

Weight Tarps 

• Heavy weight of the material makes it 

extremely tear and puncture resistant 

• Sewn loops in the corners and along the sides 

to help build field caches wherever needed 

BUP PC905 9” x 12” 

BUP PC910 12” x 13-1/2” 

BUP PC915 15” x 18” 

BUP PC920 18” x 24” 

BUP PC950 Custom sizing 

Silvicool III LIGHT 

Weight Tarps 

• Lighter weight tarps are durable in all but the 

most severe applications 

BUP PC800 6” x 9” 

BUP PC805 9” x 12” 

BUP PC810 12” x 13-1/2” 

BUP PC815 15” x 18” 

BUP PC820 18” x 24” 

BUP PC850 Custom sizing 

Ringer Tree Girdler 

• Used to treat unwanted deciduous 

(sometimes coniferous) trees 

• Designed to eliminate deep cuts into the 

woody material, which helps prevent damage 

from blow down 

• Girdles trees ranging from 5 cm - 40 cm 

• Cutting blade can be adjusted backward and 

forward permitting the knife edge to cut at an 

optimum angle on different tree diameters 

MDM 17304 15 cm x 15 cm x 2.25 cm 

MDM 17303 Replacement blade 

1/2 kg 

Herd Broadcast Seeder 

for ATV 

• Economical and efficient, revegetates roads 

and landings 

• Easily mounts on any type of A.T.V. and will 

broadcast all types of seeds, fertilizers, 

granular insecticides and herbicides 

• Centers the spread pattern on all types of 

material and features a vibration agitator for 

sure-feed of material being spread 

• 4-bladed, corrosion resistant aluminum fan is 

hooked directly to the motor shaft for positive 

fan speed 

CRW GT777ATV 

12-V electric motor 

77 lb. hopper capacity 

Backpack SprayerS 

• Ideal for spraying herbicides, insecticides, 

fungicides, fertilizer, game repellents and 

cleaning solutions 

• Rugged 15 L polyethylene tank accepts 

water or oil based chemicals 

• Standard nozzle parts permit fan-shaped, 

cone-shaped or straight stream pattern 

• Easy-fill 4” tank opening with removable lid 

and strainer 

• Padded shoulder straps and steel 

support frame 

• Comes with 0-90 P.S.I. pump 

• 12-1/4 lbs. 

SOL 425 

W / piston pump 

SOL 475 

W / diaphragm pump 

Replacement parts for 

backpack sprayers 

Shoulder Hand Seeder 

• Long lasting enclosed zinc gears 

• Oscillating shuttle to prevent clumping 

• Hopper design assures that all material will 

be broadcast 

• Comfortable shoulder strap 

EWP 2700A 

Ev-N-Spread Hand Seeder 

• Double jumbo rustproof and stainless 

steel hopper 

• Spread pattern adjusting plates 

• Three hole drop system 

EWP 3100 

SOL 0610406K Diaphragm 475 

SOL 0610407K Piston pump 425 

SOL 0610411K Wand 425 and 475 

SOL 0610408P Elbow and 425 and 475 

nozzle 

SOL 0610402K Shut off 425 and 475 

valve 

Portable Spreader 

• Holds up to 20 lbs. of seed fertilizer, pelletized 

materials, sand or ice melter 

• Convenient crank handle with a fully enclosed 

gear box for smooth operation 

• Adjusts for both directions with 

fingertip controls 

• Adjustable cross-shoulder design for comfort 

with padded strap 

SOL 421S 

5-1/2 lbs. empty 


1-888-522-9822 

43

CP3 Classic – SPRAYER 

• Durable, low maintenance internally housed 

diaphragm pump with strainer to filter out dirt 

• High/low pressure regulator for 

accurate spraying 

• Adjustable lever for left or right 

handed operation 

• Quality polypropylene tank; durable yet 

lightweight 

HAR 841998 20 L 60 P.S.I 

Protimeter Mini Moisture 

Meter with Remote Probe 

• For instant moisture readings from 6% to 90% 

in wood, drywall, concrete, and masonry 

• Ultra-bright display of 60 scaled green, yellow 

and red LED’s for clear visibility 

• Calibration check device and protection cap 

• Complete with carry pouch, extension lead 

and spare pins 

GEP BLD2000 

MINI C WOOD 

MOISTURE METER 

• Uses LED indicator with a green, yellow, 

and red scale to measure moisture from 

6% to 30%, with ±1% accuracy 

• Automatic switch turns protimeter on 

when cap is removed 

• Measures percentage of moisture in over 

150 species of wood 

FOS 79636 

Ground Cover Staples 

• Secure ground covers with these heavy-duty 

11-gauge (.12”) steel wire staples 

• Meets all current geotextile standard 

installation specifications 

• 1000 per box 

• Priced per each staple 

TRB STAPLE6 6” length x 1” top 

Find out why we 

are one of Canada’s 

leading distributors! 

We provide the 

expertise you 

demand! 

Demand Expert 

Solutions ...Your 

business depends 

on them! 

TREEMASTER II 

• Easily snaps together for installation 

and lies flat for storage 

• Protects tree from insects and animals 

• UV stabilized 

MMK 60502 24” 

MMK 60536 36” 

MMK 60548 48” 


www.csinet.ca 

Brush Blankets 

• Designed to prevent weed and grass growth, 

warm up the soil and block the blue-green 

light spectrum 

• Reduces brushing costs, seedlings grow 

faster and eliminates herbicide sprays 

• Aids in moisture retention which improves tree 

stem caliper and needle / leaf count 

• Represses competing vegetation 

1-888-522-9822 

www.csinet.ca 

44 

ARB 22 24” x 24” 200 / box 

ARB 33 36” x 36” 100 / box 

ARB 44 48” x 48” 50 / box

Timberwolf Professional 

Chainsaw BootS 

• CE class #3 chainsaw resistance with CSA 

class #1 steel toe cap 

• CSA omega - electric shock resistant 

• Achilles tendon and ankle protection with steel 

shank and air cushioned heel pockets 

• Handcrafted, 100% waterproof, ozone 

resistant natural rubber and heavy-duty cotton 

canvas lining 

• Oil and chemical slip resistant 

• Rubber collar with safety reflective stripe and 

six eyelets back lace 

• Sizes 5-15 

SOFT TOE 

Forester Forestry 

Work BootS 

• Handcrafted, 100% waterproof and oil 

resistant natural rubber 

• Cotton canvas lining 

• 9 eyelets front lace 

• Caulked sole 

• Sizes 5 - 15 

AMC VW56SZ(size) 


Soft toe 

Class #1 steel toe 



Lug sole 

Caulked sole 

STEEL TOE 

Bushwalker Lite 

Chainsaw BootS 

• CE class #3 chainsaw resistance with CSA 

class #1 steel toe cap 

• CSA omega - electric shock resistant 


shank and air cushioned heel pockets 

• Layered construction of rubber, textile and 

special grades of nylon 


resistant natural rubber and heavy-duty cotton 

canvas lining 

• Oil and chemical slip resistant 

• Nylon 420 Denier rip-stop collar with safety 

reflective stripe and back lace 

• Sizes 5 - 15 

AMC VW581SZ(size) Lug sole 

AMC VW59SZ(size) Caulked sole 

Black Tusk BOOTS 

• CSA class #1 steel toe cap with full grain 

leather upper and self cleaning natural rubber 

lug caulked sole 

• Handcrafted, 100% waterproof and heavyduty 

cotton canvas lining 

• Chainsaw resistant protection built into tongue 

and front of the boot 

• Achilles tendon and metatarsal protection 

• Sizes 5 - 15 


Bama Socks 

• Polyacryl lining keeps moisture away from skin 

and provides a warm, dry feeling in wet and 

hot conditions 

• Used extensively by tree planters and other 

forestry workers 

• Sizes 4 - 13 

Miner 49er Professional 

Mining Boot 

• CSA class #1 steel toe cap and steel plate 

• CSA Omega - electric shock resistant 

• ANSI MT/75 metatarsal protection 


shank and air cushioned sole pockets 


resistant rubber and heavy-duty cotton 

canvas lining 

• Oil and chemical resistant with removable 

comfort felt insole 

• Sizes 5 - 15 


GAN 84305(size) 

“T” Caulk Wrench 

• All steel construction and built to last 

• For both the long style and the 

standard caulks 

• Set of spare pins included 

FCP 10140 

Flat Caulk Wrench 

• Handles standard and long style caulks 

MTM 10134 


Felt InsoleS 

• Deluxe with reflective material on one side 

• Reflects heat back to feet in cold conditions 

and can be reversed to reflect heat away in 

hot weather 

• Sizes 6 - 13 

GAN 02M711(size) 

Boot Caulks 

FCP ICE 9/32” Phillips standard 

FCP RED 1/2” Phillips long 

MAE 3520CH01 3/8” Champs standard 

MAE 3018CH23 3/8” Champs cer-mec 

1-888-522-9822 

45

PULASKI AXE WITH 

FIBREGLASS HANDLE 

• Forged and tempered for long service life 

• Extra sharp axe blade and extra sharp 

mattock blade with beveled angle to hold an 

edge while cutting roots in soil 

• 36” solid core fibreglass handle with thick 

molded poly jacket for extra strength 

Fire Fighting Shovel 

(Economy Model) 

• Strong, 16-gauge tempered steel blade 

• Round point allows easy penetration of a 

variety of materials 

• Large forward turned steps for firmer footing 

CCL SS100000 48” ashwood handle 

CCL AX71020 

Pulaski Axe 

• Versatile combination of mattock and axe for 

chopping, grubbing and digging fire lines in 

brush or rocky terrain 

• Wooden handle 

HJK 100350 

HJK 402 

3-3/4 lbs. 

36” replacement handle 

Pulaski Axe Cover 

• Helps prevent injury to personnel in transport 

and keeps axes sharp 

• Riveted reinforced edges 

Shovel Cover 

• Keeps shovels sharp 

• Protects when in shipping 

• Helps prevent possible injuries 

WOE 27051 

WOE 27050 

MCLEOD FIRE HOE 

• Versatile tool often used in firefighting or for 

raking, scraping, grubbing and tamping 

• 48” ashwood handle, tempered tines for 

maximum strength and long service 

CCL SH65000 

Surefire – For 

Controlled Burns 

• Powdered gelling agent designed to thicken 

fuels used in prescribed burning 

• Formulated to be used at 3 lbs. to 5 lbs. per 

45 imperial gallons of fuel 

• Mixing ratios are only approximate 


www.csinet.ca 

46 

FireFighting Shovel 

• Lightweight and extremely rugged 

• Solid shank and heat tempered steel blade 

GNT BDFF1 46” handle 

7-1/4” x 10-1/2” blade 

FIR 20789 

50 lbs. 

Petrol Jel – For 

Controlled Burns 

• Liquid gelling agent designed to thicken fuels 

in prescribed burning 

• Specifically formulated to be used at one 4 L 

container per 45 Imperial gallons of fuel 

• Sets up very quickly, especially in warm fuels 

and may take up to 30 minutes in very 

cold fuels 

• Under normal conditions, there is no need to 

premix Petrol Jel until the burn is confirmed 

FIR 20790

fuel gelling agent 

• Fast, reliable gelling time 

• Reaches desirable viscosity that does not 

settle in the fuel 

• Can be mixed with various fuels including 

straight gas, diesel, Jet A or Jet B if available 

• Needs to be used in conjunction with 

FLASH21B in a 1:1 L mixture 

FIR FLASH21A 

FIR FLASH21B 

Gerber Axes 

• Polymid fibreglass is molded around the 

hardened steel axe head to provide a lifetime 

of trouble-free use 

• Well balanced and has ergonomic handles for 

easy use 

PART # DESCRIPTION WEIGHT SIZE 

FIK 45912 Backpack axe 17-1/2 oz. 8-7/8” 

FIK 45907 Sport axe 1-1/2 lbs. 13-7/8” 

FIK 45905 Camp axe 2-1/3 lbs. 17-1/2” 

BackPack Fire Pumps 

• Durable polyethylene orange coloured tank 

with 3/16” wall thickness 

• Corrosion resistant 

• Stainless steel and brass fittings 

• Recessed opening with removable 

nylon screen 

• Adjustable 2” shoulder straps made of nylon 

with chrome snaps 

Black King Hatchet 

• Superior quality steel 

• Complete with birch handle and sheath 

HJK 380 15” handle 1-1/2 lbs. 

OTB 20 16 L cap. 9-1/2 lbs. 

OTB P1 

Replacement hand pump 

OTB T3 

Replacement hose 

OTB T5 

Replacement strainer 

OTB T8 

Replacement lid w/ chain 

Collapsible Nylon 

BackPack Pump Tanks 

• Double walled tank with a rugged 

inner bladder 

• Padded straps hold unit so lower bag weight 

is eliminated and evenly distributed 

• Collapsible for easy storage and transportation 

• Quickly detachable buckles for fast removal of 

the unit in an emergency 

OTB 30 

OTB P1 

5 gal. (U.S.) cap. 

Replacement hand pump 

wide flare 

Iltis “Ox Head” 

Brand Axes 

• Blade is extraordinarily thin and flexible which 

reduces weight and danger of breaking 

• Shipped drawn and ready to use 

ILTIS OX HEAD AXE - WIDE FLARE 

HANDLE HANDLE 

PART # HEAD BLADE TYPE SIZE 

HJK OX1001 1-3/4 lbs. 5-1/4” Hickory 24” 

HJK OX1001SG 1-3/4 lbs. 5-1/4” Safety grip 24” 



ILTIS OX HEAD AXE - NARROW FLARE 

HANDLE HANDLE 

PART # HEAD BLADE TYPE SIZE 



Collapsible Water 

Bucket 

• Easy to store 

• Rigid steel rim 

• 18 oz. woven polyester 

• Carrying strap and tipping handle 

WOE 20795 9” x 9” 

narrow flare 

HJK OX2002 2-1/4 lbs. 5” Hickory 28” 

HJK OX2002SG 2-1/4 lbs. 5” Safety grip 28” 

REPLACEMENT HANDLES 

PART # HANDLE TYPE HANDLE SIZE 

HJK 302 Hickory 28” 

HJK 302SG Safety grip 28” 

HJK 303 Hickory 24” 

HJK 303SG Safety grip 24” 


Drip Torch 

• For back fires and controlled burning 

• Fuel trap on spout and check valve in cover 

prevent flashback into fount 

• 15 gauge seamless aluminum fount, a double 

bottom and a full length handle 

• Uses either diesel fuel or stove oil 

FOS 85022 

1-1/4 gal. 

Clearing AxeS 

• Ideal for clearing brush and 3” - 4” saplings 

• 20” handle and 7-1/4” long replaceable blade 

SAN 3022 

SAN 3028 

SAN 3029 

Replacement blade 

Replacement handle 

1-888-522-9822 

47

Camper’s AxeS 

• Nylon vinyl grip with sheath 

ESW E44A 16” 4” cut edge 

ESW E45A 26” 4” cut edge 

Axe File 

• Fine cross cut on one side, smoother single 

cut on the other 

• Handle is a flat continuation of the blade 

NCH 06704 

Sportsman’s AxeS 

• Comes with sheath 

ESW E14A 12” 2-3/4” cut edge Leather grip 

ESW E24A 14” 3-1/4” cut edge Leather grip 

Machetes 

• Steel SAE 1070 

• 48 to 52 RC hardness 

• Wood handles with nickel-plated rivets 

HJK 2610-18 

HJK 2610-22 

18” blade w/ vinyl sheath 

22” blade w/ vinyl sheath 

Ox-Head Draw Knives 

• Forged steel with wood handles 

HJK P-7CB 3-1/2” handle 9” cut edge 

HJK P-7 4-1/2” handle 10” cut edge 

Barteaux Machetes, Inc. 

Safety Handle Machetes 

• Multiple use clearing tool for heavy weed 

growth, brush, vines, grass, shrubs, etc. 

• Blade is a high carbon tempered spring steel, 

lacquered to resist rust 

• Highly visible orange plastic handle with 

knuckle bow is injection molded around the 

tang to prevent loosening 


Axe Sheaths 

• Covers entire axe head 

• Stitched and riveted with snap closure and 

belt loop 

KUN BR409 Medium For 1 - 1-1/2 lb. axe 

KUN BR410 Large For 2 - 3 lb. axe 

KUN BR411 X-Large For 3-1/2 - 4 lb. axe 

BRX M180 

BRX M220 

LEATHER SHEATHS 

BRX S18 18” 

BRX S22 22” 

18” blade 

22” blade 

www.csinet.ca 

Axe Guards 

• Heavy leather sheath covers blade edge only 

• Stitched and riveted with strap and 

buckle closure 

• Will not fit large flared Iltis 

GFL AXG-S Small 

GFL AXG-L Large 

48

Plastic Carded 

File Handle 

• Interchangeable cushion inserts designed to fit 

most popular files for handyman 

• Handle made of strong, high impact material, 

contoured to fit hand for straight, lathe and 

draw filing 

• Non-slip textured finish for easier grip 

NCH 21474 

Aluminum Alloy 

Pike Pole 

• Aluminum alloy tubing 

• 1-1/4” outer diameter - 0.065 wall 

• Crimped end plug 

• Screw-in gaff 

• Strong, lightweight, durable and buoyant 

• Knob handgrip 

SOO 4905-30106 6’ 

SOO 4905-30110 10’ 

SOO 4905-30112 12’ 

SOO 4905-30114 14’ 

Hookaroons 

• Forged steel head with #4 axe handle 

• Heat treated for maximum strength 

and durability 

• 36” long 

Ash Pike Pole 

• Supplied with threaded screw-in type gaff 

• Straight pike and hook 

• Ash handle with 6” ferrule 

SOO 4906-10010 10’ 

SOO 4906-10012 12’ 

SOO 4920-01010 Reg. head Model No. 219 

SOO 4920-01030 Fabr. head Model No. 222B 

Hookaroon Replacement 

Handle 

SOO 4921-01005 36” Model No. 4 

Heavy Hook Duck 

Bill Peavey 

• Forged steel hook, pick and socket 

• Top quality maple handle 

• Model #121 

SOO 4925-15048 4’ 2-3/8” socket dia. 

Standard Cant Hook 

• Premium quality steel clasp and short steel 

toe ring 

• Has forged hook #291 made with special 

high-carbon steel 

SOO 4935-20054 4-1/2’ 2-3/8” socket dia. 

SledgeHammer 

• American hickory handle and standard head 

PART # 

HEAD 

WEIGHT 

HANDLE 

LENGTH 

REPLACEMENT 

HANDLE 

HJK 1060-043 4 lbs. 24” 225 

HJK 1060-06 6 lbs. 32” 227-SE 

HJK 1060-08 8 lbs. 36” 229 


1-888-522-9822 

49

Grizzly Heavy-duty 

Grass Whip 

• Steel serrated blade, securely attached to a 

metal shaft 

• Shaped hardwood handle 

GNT GWC09 42” 

Mirror Stereoscope 

• Precision mirrors provide a stereo base of 

approximately 10”, providing complete 

separation of 9-1/2” x 9-1/2” aerial 

photographs with normal optical overlap 

• 1.5X magnifying lenses and optional 

binoculars which provide interpupillar 

adjustment of 56 mm - 74 mm 

• Four foldable legs for storage, one of which is 

adjustable for uneven surfaces 

• Monoculars focus individually at ± 5 diopters 

• Optional parallax bar measures a range of 

40 mm in increments of 0.05 mm 

• Measures the height of three 

dimensional objects 

• Micrometer reads a range of 24 mm, which 

gives an accuracy to .01 mm 

TOH 2039 

TOH 2039BINO 

SOK 818507 

Optional 4X binoculars 

Optional parallax bar 

Geoscope Mirror 

Stereoscope 

• Portable for use in the lab or field 

• Use with 9” x 9” photos 

• Features 1.3X magnification 

• Constructed with rugged plastic frame and 

folds to a compact size for easy storage 

and transport 

SAD SA001 2” x 6-1/2” x 14” 

Geoscope Pro 

• Constructed from tough and durable ABS 

plastic, chrome surface mirrors and crown 

glass lenses, making it suitable for the rigors 

of 

field and office work 

• Includes 3X binocular eyepiece, 1.2X 

magnification eyepiece and parallax wedge 

PlanWheel XL - SCALEX 

• Takes scaled measurements from blueprints, 

maps and plans 

• Built-in scale factor to match plans 

• 1.0 mm (.04”) resolution 

• 2 AAA batteries included 

PIC 09200550 

0.25% accuracy 

MapWheel - SCALEX 

• Takes scaled measurements specifically 

from maps 

• Built-in scale factor to match maps 

• Instant measurement display 

• 2 AAA batteries included 

PIC 09200700 

0.25% accuracy 


www.csinet.ca 

50 

Student Stereoscope 

• 2X magnification 

• Tough plastic frame 

• Wire legs 

SAD SA020 

Peak Pocket 

Stereoscope 

• Choice of 2 or 4 power lenses 

• Adjustable interpupillary distance 

• All metal cast alloy frame with foldaway legs 

• Supplied with carrying case 

TOH 19942 2 power 

TOH 19944 4 power 

Air Photo Case 

• Cordura nylon with clear vinyl map storage 

pocket, pencil/pen/ruler slots and adjustable 

shoulder strap 

• Clear on both sides 

WOE 10043 

Air Photo HolderS 

• Protects maps and aerial photos from 

moisture, dirt and abrasion 

• Transparent plastic on both sides 

FOS 51092 10-1/2” x 10-1/2” Soft vinyl (zip end)

Placom Digital 

Planimeter 

• Measures area by a 6-digit pulse count, which 

enables it to measure an area 100 times 

larger than an ordinary planimeter 

• Converts measured area value to another unit 

of measure, and with a new scale value 

• Memory function enabling addition or 

subtraction of second measurement 

• Able to measure area with different lateral and 

longitudinal scales 

• 325 mm maximum vertical measuring range 

and 30 m maximum horizontal 

measuring range 

KOI KP90N 

W/ AC adapter and plastic case 

Ruler / Scale 

/ Protractor 

• 6” clear plastic scale 

• Features a 180° protractor 

CTH A14A 1:15,000, metric on other side 

CTH A14B 1:5,000, 1:10,000, 1:20,000 

CTH A14K 1:10,000, 1:15,000, 1:20,000 

Protractor Rulers 

• Laminated for durability 

• Transparent 180˚ protractor with 10ths and 

50ths to the inch scales 

CTH W37 6” 

Map Measure 

• Features six of the most common map scales 

• Measures distances on a variety of maps 

• Leatherette case and plastic magnifying 

lens included 

JHN 2804205 

Miruki Protractor 

/ Scale 

• Clear plastic forestry scale with the following 

metric scales: 

1:5,000 

1:10,000 

1:15,000 

1:20,000 


CTH 10029 6” x 1-1/2” 

Navigational 

Protractor 

• Field and office instrument for rapid 

establishment of bearings onto maps and 

aerial photos 

• Graduated to 360˚ clockwise and 

counterclockwise 

SMA 9995 5” x 5” 

Douglas 

Navigational Protractor 

• Field and office instrument for rapid 

establishment of bearings onto maps and 

aerial photos 



Miruki Protractor 

/ Scale 

• Clear plastic mining scale with 1:50,000 UTM 

grid locator and the following metric scales: 

1:10,000 

1:50,000 

1:125,000 

1:250,000 


CTH 10030 6” x 1-1/2” 

Miruki Navigational 

Protractor 



CTH 10019 5” x 5” 

LON DM51 5” x 5” 

UTM Grid Reader 

• Transparent laminated scale with the following 

metric scales: 

1:1,000 

1:10,000 

1:15,000 

1:24,000 

1:50,000 

1:63,360 

1:100,000 

1:250,000 

• Features a full 360˚ protractor 

CTH GR2 5” x 6” 


1-888-522-9822 

51

Multiscale “Quadrangle” 

• Ultimate pocket-sized set of map scales 

including the 12 most commonly used for 

measurement of distances on topographic 

quadrangle maps and aerial photographs 

used worldwide 

• Six leaves, precision printed both sides on 

white laminated vinyl with the following scales: 

1:10,000 (10 cm = 1 km) 

1:12,000 (1” = 1,000’) 

1:15,840 (4” = 1 mile) 

1:24,000 (1” = 2,000’) 

1:25,000 (4 cm = 1 km) 

1:50,000 (2 cm = 1 km) 

1:62,500 (1” = 1 mile) 

1:63,360 (1” = 1 mile) 

1:100,000 (1 cm = 1 km) 

1:125,000 (1” = 2 miles) 

1:250,000 (1 cm = 2.5 km,1” = 4 miles) 

1:500,000 (1 cm = 5 km, 1” = 8 miles) 

FOS 47208 

Multiscale “Scaler” 

• Unique pocket-sized set that includes all 24 

standard architect and english/metric engineer 

scale ratios 

• Six leaves, precision printed both sides on 

white laminated vinyl with the following scales: 

Architect: 3, 1 1/2, 1, 3/4, 1/2, 3/8,1/4, 3/16, 1/8, 

3/32, 1/16, 1/32 inches/foot 

Engineer english: 10, 20, 30, 40, 50, 60 parts/inch 

English/metric: 20, 33-1/3, 40, 50, 80,100 

parts/meter 

FOS 47213 

Metric Area Dot GridS 

• Reads areas on maps and aerial photos 

directly in hectares 

• Dots and squares stand out on transparent 

plastic grid 

• Used for maps with a 1:10,000 or 

1:20,000 scale 

• 8” x 10” grid 

Find out why we 

are one of 

Canada’s leading 

distributors! 

We provide the 

expertise you 

demand! 

Demand Expert 

Solutions ...Your 

business depends 

on them! 

DGR 10006 

DGR 10038 

DGR 10044 

25 dots per square cm 




Modified Hectare 

Dot Grid 

• For use on maps or photos of any scale 

• Place grid over area to be measured, count 

the dots and multiply by converting factor 

listed on grid to obtain area 

• 7-3/4” x 7-3/4” grid 

DGR 20073 


www.csinet.ca 

1-888-522-9822 

www.csinet.ca 

52

FORESTRY - Commercial Solutions Inc

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?