Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Image Notes<br />
1. 12" length of 1" ID pipe insulation slipped over tractor.<br />
Step 10: Loading And Firing The <strong>Net</strong>gun<br />
Now for the fun part. Please be safe in this step. If the launcher arms aren't glued, there is a chance they will fly off during firing, so make sure any spectators are behind<br />
you. Only load the net gun when there is NO pressure in the chamber. It is helpful to have an assistant when laying out and untangling the net.<br />
Firing and reloading supplies<br />
Assembled netgun<br />
Assembled net<br />
Open area, preferably outside<br />
Compressed air source<br />
Lay net on ground in a square, pick a clean area, as getting leaves or other debris in the net will keep it from deploying correctly. Pick two tractors, hold them<br />
together, these are the tops. Walk the tops across the net so they are in between the other two tractors, these outside two are now the bottoms. Move the tractors<br />
together so they are in a row touching sides.<br />
Starting at the base of the tractors, pull the net into a rope-like tube. Begin at the tip of this tube (farthest from the tractors), grab a 6-8" handful of net and fold<br />
back and forth in a zig zag fashion until you are up to the tractor strings. Do NOT keep folding in the same direction, rolling the net will keep it from deploying<br />
correctly.<br />
At the end of the zig zag fold you will end up with an 8 inch, or so, bundle of net. Smooth this bundle out, and insert into the net holder, it will fit snugly.<br />
Remember your top and bottom tractor order. Working left to right the first tractor slips on the bottom left launcher arm, second on the top left, third on the top<br />
right, and the fourth on the lower right.<br />
http://www.instructables.<strong>com</strong>/id/<strong>Build</strong>-A-<strong>Net</strong>-<strong>Gun</strong>/