VHG Labs, Inc.

More documents

Recommendations

Info

Section 1 Petroleum NEW! Multi-Element Coolant Standard Standards Coolant Standard The following standard is intended for use in the analysis of metals in ethylene glycol or other coolants. It can be diluted 1:1 with ethylene glycol (for matrix matching) or in dilute nitric acid. Matrix: 1% HNO 3 , tr. HF. Volume (mL) Product No. 500 GLYCOLSTD-500 Element Conc. (µg/mL) Element Conc. (µg/mL) Al 50 Mo 500 B 1,000 Na 1,000 Ca 50 P 2,500 Cu 50 Pb 50 Fe 50 Si 500 K 1,000 Zn 50 Mg 50 Custom single element or multi-element standards are available (please inquire). NEW! Fuel Dilution Standards Fuel Dilution Standards These standards are intended for use in the determination of fuel (diesel fuel or gasoline in motor oil) by fuel dilution meter (fuel sniffer), IR, GC analyzer or flash point. They are prepared gravimetrically from high purity fuels added to high purity motor oil and certified by GC-FID in accordance with ASTM Methods D3524 and D3525. Description Application Product No. 5% Virgin Diesel Fuel in 15W40 Motor Oil Fuel Dilution Meter DSL5%VIR-100 5% Devolatilized Diesel Fuel in 15W40 Motor Oil GC or IR DSL5%DEV-100 5% Virgin Gasoline in 10W30 Motor Oil Fuel Dilution Meter GAS5%VIR-100 5% Devolatilized Gasoline in 10W30 Motor Oil GC or IR GAS5%DEV-100 NEW! Analyzing Biodiesel? C a l l f o r m o r e i n f o r m a t i o n o n s t a n d a r d s f o r b i o d i e s e l .
Crackle Test References NEW! “Crackle Test”references for determining water in oil (all values nominal). The crackle test is a visual test performed by placing a small drop of oil onto a hot plate (usually around 300ºC). The amount of water present in oil samples is estimated by comparison to these standards. All values certified by gravimetric preparation. Nominal Water Concentration (%) Volume (mL) Product No. Blank 250 CT-BLK-250 0.1% 250 CT-0.1%-250 0.5% 250 CT-0.5%-250 1.0% 250 CT-1.0%-250 Section 1 Petroleum Standards Standards for Used Oil Analysis Wear Metals Coolant Fuel Dilution Water in Oil Soot Standards for S, N, Cl and Metals Petroleum Standards NEW! Karl Fischer Titration Certified Reference Standards Petroleum Physical Test Standards Karl Fischer Titration certified reference standards for determining water in motor oil (all values certified by Karl Fischer Titration). This test determines the amount of water present in the oil and is the most commonly-used test for this type of determination, with a high degree of accuracy. For use with ASTM D6304. Nominal Water Concentration (%) Volume (mL) Product No. Blank 100 KF-BLK-100 0.1 100 KF-0.1%-100 0.5 100 KF-0.5%-100 1.0 100 KF-1.0%-100 NEW! Soot Content Standards Reference standards for use in the determination of soot content in 15W40 diesel motor oil by infrared spectroscopy or other technique. All values certifed by thermogravimetric analysis (TGA). Nominal Soot Content Range (%) Volume (mL) Product Number Blank 50 SOOT-BLK-50 0.5-2 50 SOOT-A-50 2-4 50 SOOT-B-50 4-6 50 SOOT-C-50 6-9 50 SOOT-D-50 9-12 50 SOOT-E-50 Set of all 6 6 x 50 SOOT-SET
Page 1: VHG Labs, Inc. Standards and Suppli
Page 5 and 6: Petroleum Physical Test Standards F
Page 7: Petroleum Physical Test Standards N

VHG Labs, Inc.

Create successful ePaper yourself

Delete template?

Save as template?