stucarit 318-e\374 - Epple-chemie.de
stucarit 318-e\374 - Epple-chemie.de
stucarit 318-e\374 - Epple-chemie.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Sealing compounds // Adhesives // Cast resins<br />
<strong>stucarit</strong> <strong>318</strong><br />
Description:<br />
<strong>stucarit</strong> <strong>318</strong> is a sealing compound for surfaces and<br />
threads, which results into easily <strong>de</strong>tachable<br />
connections. It remains duroplastic, enables absolutely<br />
exact constructions and provi<strong>de</strong>s good bonding to the<br />
seal faces.<br />
Field of application:<br />
Sealing of surfaces.<br />
<strong>stucarit</strong> <strong>318</strong> is suitable as sealant for surfaces and<br />
threads.<br />
Specific properties:<br />
<strong>stucarit</strong> <strong>318</strong> can be charged immediately after installation.<br />
It does not contain any mineral fillers, so that no abrasive<br />
effect in brackets or threads is to be expected.<br />
Application / surface:<br />
✏ The surfaces of the assembly components have to be<br />
clean and free from dust and grease.<br />
✏ If possible, stir-up the sealing compound before use<br />
Cleaning of tools:<br />
Thinner epple 467.<br />
Packaging unit:<br />
Plastic-tin, cartridge.<br />
Basis / characteristics<br />
solvent-containing aqueous solvent-free curing duroplastic<br />
Properties of the liquid sealing compound<br />
Property Standard Value<br />
Viscosity DIN EN ISO 3219 600 Pas<br />
Density DIN 53479 1,22 g/cm³<br />
Colour<br />
dark grey<br />
Solid content 100 %<br />
Storage<br />
24 months in closed original containers, stored in a dry and cool place (i<strong>de</strong>al<br />
storage temperature: 5 - 30 °C).
Sealing compounds // Adhesives // Cast resins<br />
<strong>stucarit</strong> <strong>318</strong><br />
Properties of the cured sealing compound<br />
Property<br />
Standard<br />
Curing<br />
-<br />
ventilation time<br />
skin formation time<br />
duroplastic<br />
curing / track of 4-6 mm<br />
Curing conditions / contact pressure - > 5 ° C no con tact pressure<br />
required, just fixing<br />
Hardness<br />
Tensile test<br />
Adhesive strength in the shear tension test<br />
Shore-A<br />
Shore-D<br />
elasticity<br />
strength<br />
elongation<br />
DIN 53505<br />
DIN 53505<br />
-<br />
-<br />
-<br />
epple-standard<br />
(acc. to DIN EN ISO 527) -<br />
-<br />
DIN EN 1465<br />
wood / wood<br />
steel / steel (blasted SA2,5)<br />
PA 6 / PA 6<br />
-<br />
-<br />
-<br />
Adhesive strength in the peel test 180 ° DIN EN 1464 -<br />
Surface cleavability - -<br />
Value<br />
Temperature resistance - - 30 ° C to + 150 ° C<br />
Thermal conductivity ISO 8894-1 -<br />
Absorption of water<br />
20 ° C / 7 days<br />
20 ° C / 30 days<br />
100 ° C / 30 minutes<br />
ISO 62 -<br />
-<br />
-<br />
Chemical resistance epple-standard water,<br />
saline solutions,<br />
fuel,<br />
premium fuel,<br />
hydrocarbons,<br />
mineral oils.<br />
07/07<br />
Diese Druckschrift soll Sie beraten. Die in ihr gemachten Angaben entsprechen unserem besten Wissen,<br />
jedoch kann eine Verbindlichkeit daraus nicht hergeleitet wer<strong>de</strong>n.<br />
This data sheet is for your information. The data supplied are according to the best of our knowledge<br />
and no liability can be inferred from them.
Change language