Direct attachment of profile steel and aluminium sheeting to steel ...

Installation tools and accessories
Couloured fasteners
Setting tool E 420
DI 600 Screw gun
The E420 setting tool is required
for installing self-drilling fasteners
with the irius system.
For installing fasteners efficiently and
reliably. The lightweight tool facilitates
fatigue-free installation. Its high
performance and practical depth stop
are ideal for direct fastening.
The options created by the new
fasteners for using colour in cladding
design are almost unlimited. The
colour of the fastener head can be
coordinated precisely with the
roofing and cladding.
High-quality SFS intec powder coating,
already used successfully on millions
of fasteners.
High-quality attachment starts at the planning stage
SFS intec has set up an advisory
service to enable planners, architects
and contractors to make a fast, ideal
choice of fasteners from the wide
range availabe.
Play it safe and take advantage of
our many years of experience in the
field of mechanical fastening.
© SFS intec 2003 Technical changes reserved
RC 10.00.03 E Produced in Switzerland
Advice and sales
SFS intec Inc., FasteningSystems
US-Wyomissing, PA 19610 Phone (1) 610 376 5751
Spring St. & Van Reed Rd. Fax (1) 610 376 8551
P.O. Box 6326
www.constructionfasteners.com