Product Catalogue | 2015

84 | PRODUCT CATALOGUE ACCESSORIES | 85
SVR-100
PA SPEAKER SVR-100 5/15 W
PRODUCT CODE 50007, 50909
FEATURES
100 V line vandal resistant speaker
Marine grade 316 stainless steel face plate
Quality audio output
OPTIONAL ACCOMPANYING PRODUCTS
Universal Audio Interface (UAI-3B1)
SPECIFICATIONS
Speaker
1 x 8 Ω, 8 W RMS, 4” dual cone
PANEL MICROPHONE MWM-7C1/MWM-7C1/P
PRODUCT CODE 51158, 51157
FEATURES
OPTIONAL ACCOMPANYING PRODUCTS
Surface mounted microphone with balanced, line level output
Used for recording, covert monitoring, audio input for CCTV cameras
Two options available: stainless panel with activate button or Clipsal wall
plate.
LED indicator for activity feedback
Audio Monitoring Device (UAI-AMD)
Power Supply Unit (PSU-242)
Frequency Response
100 Hz – 15 kHz (±6 dB)
SPECIFICATIONS
Sensitivity
90 db SPL, 1 kHz, 1 W, 1 m
MWM-7C1
Microphone
160 Hz – 16 kHz (input circuit frequency response ±3 dB)
100 V Line Power Taps (0.33, 0.66, 1.25, 2.5, 5) W (SVR-100 5 W)
(1.25, 2.5, 5, 10, 15) W (SVR-100 15 W)
Operating Temperature
Operating Humidity
Cabling
(-20 - 55) ˚C
(10 - 95) % relative humidity (non-condensing)
Figure 8, 0.75 mm² multi-strand (typical)
Connectors 4 way screw terminal block (SVR-100 5 W)
2 way screw terminal block (SVR-100 15 W)
Compliance
Form Factor
AS1670.4 EWIS standard (SVR-100/5W)
Circular flush wall panel or surface mount with CSH-1
Dimensions (Ø x D) 170 mm x 64-109 mm (SVR-100 5 W)
170 mm x 125 mm (SVR-100 15 W)
MWM-7C1/P
Output Level
Output Impedance
Control Buttons
Auxiliary Functions
Power Input
Power Consumption
Operating Temperature
Operating Humidity
Indicators
-4 dBu nominal
600 Ω
1 x stainless steel mechanical configurable PTT or toggle on/off
Relay contacts (1 x NO/NC) max. 2 A @ 24 V d.c.
(12 – 32) V d.c., 24 V d.c. nominal
1.8 W max. @ 24 V d.c. (MWM-7C1)
0.9 W max. @ 12 V d.c. (MWM-7C1/P)
(0 - 50) ˚C
(10 – 90) % RH (non-condensing)
Green indicator (MWM-7C1)
Weight 1.2 kg (SVR-100 5 W)
1.3 kg (SVR-100 15 W)
Cabling
Audio: single screened pair cable
Power: 0.75 mm², multi-strand (max. 100 m)
Material
Finishes
Environment
Vandal Resistant
Mounting Options
316 stainless steel
Linish, chamfered edge
Non rain exposed area
Yes
Flush mount direct into ceiling or wall, surface mount backbox (CSH-1)
Connectors
Form Factor
Dimensions (WxHxD)
Weight
Power: 2 way 3.81 mm pluggable screw terminal block
Signal: 8 way 3.81 mm pluggable screw terminal block
Flush wall panel
116 mm x 70 mm x 50 mm
0.25 kg (MWM-7C1)
0.2 kg (MWM-7C1/P)
SURFACE MOUNT BACK BOX CSH-1
PRODUCT CODE 50620
Material
Finishes
Stainless steel (MWM-7C1)
Plastic, white (MWM-7C1/P)
Linish (MWM-7C1)
Clipsal single gang plate (MWM-7C1/P)
SPECIFICATIONS
Environment
Indoor use only
Suitable For
SVR-100 series
Vandal Resistant
Yes (MWM-7C1 only)
Dimensions (Ø x D)
Weight
231 mm x 71 mm
1.2 kg
Mounting Options
Flush mount direct into ceiling or wall (MWM-7C1), mounting hole pitch suits
single gang electrical plate (MWM-7C1/P)
CSH-1
Material
Finishes
304 stainless steel
Powder coated, gloss, black
Fixings
M3.5, M4 or self tapping screws (MWM-7C1)
M3.5 screws (MWM-7C1/P) (included with purchase)
Environment
Vandal Resistant
Speaker Mounting Holes
Speaker Fixings
Cable Entry
Non rain exposed area
Yes
4 x M4 threaded holes
4 x M4 security torx screws
1 x 25 mm hole centred rear