Front Load Family Washers Brochure - Steiner-Atlantic

On-Premises Laundry
On-premises laundries face enough daily challenges, wrestling with complicated, inefficient
equipment shouldn’t be one of them. IPSO commercial manual control washers and dryers are
the perfect solution for small on-premises laundry applications such as salons and veterinary
clinics. These pieces also continue our goal of building equipment that’s simple to own and
even more simple to operate.
Simplifying Ownership
Washer
ENERGY EFFICIENT. IPSO’s 18 lb capacity Horizon® front load washer keeps water use to an
ultra-low 13.9 gallons per cycle, which can help your laundry reduce expenses. In addition, the
washer’s low water use qualifies it as an ENERGY STAR® product.
LOWER COSTS. A one horsepower motor produces a 1000 RPM spin speed. This spins more
water out of loads and keeps drying times and utility costs down, while increasing throughput.
RUGGED RELIABILITY. Durable commercial components and a high-quality shell ensure your
laundry gets years of solid performance from your investment.
Dryer
TIME SAVINGS. A large, 7.0 cu.ft. cylinder saves time by handling your largest loads and
oversized items. Time savings continue with a door opening of 2.06 sq. ft., which aids fast
loading and unloading.
HIGHLY EFFICIENT. IPSO’s advanced blower system produces airflow of 220 cu.ft. per minute,
making efficient use of the dryer’s heated air and keeping drying times to a minimum.
Homestyle Front Load Family
EASE OF OPERATION.
There’s nothing complicated
about IPSO’s controls. Their
intuitive operation translates
into minimal, if any, training
necessary for employees.
Stack Washer/Dryer
IPSO’s stack washer/dryer
takes all the same features of
the stand-alone washer and
dryer and puts them in a spacesaving
package. The stack’s
versatile design allows it to be
installed on any floor type.
BFN5SF, BDE30F,
BDG30F, BTE50F,
BTG50F

Homestyle Front Load Family Specifications
BDG30F - Gas Dryer BTG50F - Stack Washer/Gas Dryer
BFN5SF - Washer BDE30F - Electric Dryer BTE50F - Stack Washer/Elec. Dryer
Height - in (mm) 43" (1092) 43" (1092) 75 1/4" (1911)
Width - in (mm) 26 7/8" (683) 26 7/8" (683) 26 7/8" (683)
Depth - in (mm) 28" (711) 28" (711) 28" (711)
Work Surface Height - in (mm) 43" (1092) 43" (1092) N/A
Water Temperatures Hot, Warm, Cold N/A Hot, Warm, Cold
Cycles Regular, Permanent Press, Auto Regular/Delicate, (Same as single washer & dryer)
Delicate, Rinse & Spin, Spin Only Auto Permanent Press, Time Dry
Basket Volume - cu. ft. (bar) 2.84 (80) 7.0 (198) 2.84 (80), 7.0 (198)
Water Pressure - psi (bar) Pressure fill - 20 to 120 (1.4/8.3) N/A Pressure fill - 20 to 120 (1.4/8.3)
Spin Speed - RPM 1000, 650, 500 N/A 1000, 650, 500
Control(s) Push-to-Start Push-to-Start Push-to-Start
Motor - HP 1 1/3 1, 1/3
Motor - RPM Variable Speed 1725 Variable Speed, 1725
Voltage/Hz/Phase Circuit Breaker Gas: N/A N/A Gas: 120/60/1 15 Gas: 120/60/1 15
Electric: 120/60/1 15 Electric*: 120/240/60/1 30 Electric*: 120/240/60/1 30
Top Finish Porcelain Porcelain N/A
Colors White White White
Net Weight - lb (kg) 240 (109) Gas: 150 (68), Electric: 145 (66) Gas: 355 (161), Electric: 350 (159)
Crated Weight - lb (kg) 260 (118) Gas: 160 (73), Electric: 155 (70) Gas: 385 (175), Electric: 380 (172)
Agency Approvals c UL us Gas: CSA Star, CSA Flame Gas: CSA Star, CSA Flame
Electric: c UL us
Electric: c UL us
* Factory equipped 120/240/60/1 - may be field converted to 120/208/60/1
by qualified servicer.
For the most accurate information, the installation guide should be used for all design
and construction purposes. Due to continuous product improvements, design and
specifications are subject to change without notice. The quality management system
of Alliance Laundry Systems’ Ripon facility has been registered to ISO 9001:2000.
©Copyright 2009 Alliance Laundry Systems LLC
Printed in the U.S.A.
Control Options
Questions? Contact us at:
1 800 USA IPSO or www.ipso.com
1 800 (872-4776) Washer Control
Dryer Control
Stack Washer/Dryer Control
2009-0069