centi sp 6000 msda - CFD Commercial Flooring

MATERIAL SAFETY DATA SHEET
Product Name: CENTI 6000 SP Special Purpose Adhesive
Product Code:
Key Number:
Manufactured in the USA for Centiva by International Floors of America, Inc.
MSDS Number: 104540
MSDS Date: 04-15-08
Emergency Telephone Numbers: 256.767.4990
Page 1 of 3
HEALTH 0
Flooring Products
FIRE 0
REACTIVITY 0
SPECIFIC
N/A
1. IDENTIFICATION See Addendum: Reference Page:
Chemical Name:
Chemical Family:
Acrylic Adhesive
Water based acrylic adhesive for rubber and vinyl flooring
CAS #
CAS Name:
Synonyms/Common Name: Adhesive/water-based acrylic
DOT Information: This product has not been designated as a hazardous material by U.S. Department of Transportation (DOT)
Chemical Formula:
Molecular Weight:
2. PHYSICAL DATA See Addendum: Reference Page:
Appearance: Paste-colored Melting Point:
Color: White/opaque Boiling Point: 212°F
State: Paste/liquid flow gel form Flash Point: None
Odor Characteristics: Low Odor/Odorless Freezing Point:
pH: 8.6 Percent Volatility: By weight 27%
Viscosity: Slow/medium Evaporation Rate (BAc=1)
Specific Gravity (Water=1): 1.165 Solubility in Water: Highly soluble
Vapor Density (Air=1): Same as water Solubility in Oil: Soluble
Vapor Pressure:
Same as water
Solubility in Acetone:
Soluble
3. INGREDIENTS See Addendum: Reference Page:
Material/Components CAS# CAS Name TLV Units Approximate %

MATERIAL SAFETY DATA SHEET
Product Name: CENTI 6000 SP Special Purpose Adhesive
Product Code:
Key Number:
Manufactured in the USA for Centiva by International Floors of America, Inc.
MSDS Number: 104540
MSDS Date: 04-15-08
Emergency Telephone Numbers: 256.767.4990
Page 2 of 3
4. FIRE AND EXPLOSION HAZARD DATA See Addendum: Reference Page:
Flash Point: None
Extinguishing Media: Water fog, dry chemical, and chemical foam
Special Fire-Fighting Procedures: Use protective clothing and self-contained breathing apparatus
Unusual Fire and Explosion Hazards: None known
Flammable Limits in Air % by Volume: Lower-None, Upper-None
5. HEALTH HAZARD DATA See Addendum: Reference Page:
Threshold Limit Value:
None known
Effects of Overexposure:
Inhalation:
Skin Contact:
Eye Contact:
Ingestion:
Delayed Effects:
No effect known
No effect known
May cause slight irritation
Not likely to occur. If swallowed, no side effects known
None known
Medical Conditions Aggravated by Exposure:
None known
6. FIRST AID MEASURES See Addendum: Reference Page:
Inhalation: Remove to fresh air area. Contact physician if irritation occurs.
Skin Contact: Wash with soap and water. Contact physician if irritation occurs.
Eye Contact: Immediately flush with water for 15 minutes. Contact physician if irritation occurs.
Ingestion: Induce vomiting, contact a physician.
Notes to Physician: This product has been tested and found to be non-toxic as defined by the Federal Hazardous Substance
Act, 16 CFR 1500.3.
7. REACTIVITY DATA See Addendum: Reference Page:
Stability: Stable
Incompatibility (materials to avoid): None known
Hazardous Combustion or Decomposition Products: None known
Hazardous Polymerization: Will not occur
Conditions to Avoid: N/A
8. SPILL OR LEAK PROCEDURES See Addendum: Reference Page:
Actions to Take for Leaks and Spills: Dispense sand or vermiculite. Collect and place in a waste container.
Wash area affected thoroughly with water.
Waste Disposal Method: Dispose of in accordance with Federal, State, and local regulations.

MATERIAL SAFETY DATA SHEET
Product Name: CENTI 6000 SP Special Purpose Adhesive
Product Code:
Key Number:
Manufactured in the USA for Centiva by International Floors of America, Inc.
MSDS Number: 104540
MSDS Date: 04-15-08
Emergency Telephone Numbers: 256.767.4990
Page 3 of 3
9. SPECIAL PROTECTION INFORMATION See Addendum: Reference Page:
Respiratory Protection: Not normally required with good ventilation.
Eye Protection: Wear splash goggles if contact with material is likely.
Skin Protection: Wear gloves if contact with material is likely.
Other Clothing:
Other Equipment: Use protective self-contained breathing apparatus if contact is made with material that is burning.
Engineering Controls: Normal room ventilation.
10. HANDLING AND STORAGE See Addendum: Reference Page:
11. Special Precautions: Use good hygienic practices: wash hands before eating, using washroom, or smoking. Keep out of
reach of children.
Other Precautions: Store above 40°F.
11. REGULATORY INFORMATION See Addendum: Reference Page:
Workplace Classification:
12. TOXICOLOGICAL INFORMATION See Addendum: Reference Page:
Acute Data:
Reproductive/Teratology Data:
13. ECOLOGICAL INFORMATION See Addendum: Reference Page:
Fate in the Environment: VOCs = 0 (zero) calculated
14. DISPOSAL CONDITIONS See Addendum: Reference Page:
Procedures:
15. TRANSPORTATION INFORMATION See Addendum: Reference Page:
DOT Classification:
Warning Labels: