Adana Super White Cement
Adana Super White Cement
Adana Super White Cement
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PHYSICAL<br />
PROPERTIES<br />
N/mm 2<br />
CHEMICAL<br />
PROPERTIES<br />
%<br />
<strong>White</strong> <strong>Cement</strong><br />
Points to Take into Consideration When Using<br />
‣ For concrete mixtures, white aggregates compliant with the standard “TS 706 EN 12620 Concrete<br />
Aggregates” should be used. <strong>Cement</strong> and aggregates are the major components determining the color<br />
of concrete. In order to obtain the required white color, whiteness of the aggregates should be<br />
considered.<br />
‣ It is important that materials used for white concrete mixtures should not be pigmentary substances<br />
and these materials should be stored cleanly.<br />
‣ It is critical that equipment used for reinforced concrete should not be rusty or dirty. If it is possible,<br />
galvanized equipment should be used.<br />
‣ It is essential that water absorption of molds to be used should be low, these molds should be clean<br />
and cement paste should not leak through the mold during vibration.<br />
‣ Fresh concrete vibration should be performed very well and it must be cured. Concrete should be<br />
wrapped up in wet materials.<br />
‣ Since the surface of concrete is expected to be void-free and smooth in exposed concrete applications,<br />
preparation and placement of concrete should be accurate and slump loss should be checked. Concrete<br />
should be poured by means of a belt mixer or a crane and a bucket instead of a pump.<br />
Aesthetic <strong>White</strong><br />
Standard Characteristics of <strong>Super</strong> <strong>White</strong> Portland <strong>Cement</strong><br />
TS 21 – WOPC 52.5 R / 85<br />
(EN 197-1 CEM I 52.5 R)<br />
Undissolved residue<br />
TESTING METHOD<br />
Characteristics as per<br />
TS 21<br />
Minimum<br />
Maximum<br />
- 5<br />
SO 3 - 4<br />
Cl TS EN 196-2, TS 21 - 0.1<br />
Loss on Ignition - 5<br />
Volume<br />
Expansion<br />
mm<br />
- 10<br />
Initial setting minute 45 -<br />
Final setting minute TS EN 196-1,3 - -<br />
2 days<br />
30.0 -<br />
Compressive<br />
7 days - -<br />
strength<br />
28 days 52.5 -<br />
<strong>White</strong>ness CIE System, Y Value 85.0 -<br />
“We produce Blended Extra <strong>White</strong> <strong>Cement</strong> compatible with EN 197-1 CEM II/B-LL 42.5 R and its<br />
whiteness is not lower than 80%.”<br />
Address: Ceyhan Yolu Üzeri 12. Km 01321 <strong>Adana</strong>/TURKEY<br />
Tel: (322) 332 99 50 Fax: (322) 332 97 32 / (322) 332 95 01<br />
www.adanacimento.com.tr<br />
bilgi@adanacimento.com.tr<br />
<strong>Adana</strong> <strong>Super</strong> <strong>White</strong> <strong>Cement</strong>
<strong>White</strong> <strong>Cement</strong><br />
Product Description<br />
‣ <strong>White</strong> Portland <strong>Cement</strong> is a hydraulic binder that is produced by using special raw materials that contain<br />
least amount of chemical materials which color the cement and by means of advanced technology. It is<br />
subject to fine grinding and has a high strength gain with aesthetic and decorative characteristics.<br />
‣ Architectural and Decorative Concrete<br />
Trade and business centers, building complexes, residence constructions, bridges, aesthetic and decorative<br />
buildings, congress, art and culture centers, metro and train stations, stadiums, etc.<br />
Product Types<br />
‣ <strong>White</strong> Portland <strong>Cement</strong><br />
This is a white hydraulic binder that is obtained by grinding whitish clinker, which is acquired by kilning a mixture<br />
of special clay and limestone, along with some gypsum within the scope of the standard TS 21. This product,<br />
designated as WOPC 52.5R / 85, meets also all requirements of CEM I 52.5 R type and class within the scope of<br />
the standard EN 197-1.<br />
‣ Architectural Prefabricated Exterior Panels<br />
It can be used for housing estate constructions, congress and concert halls, etc. It reduces the time needed for<br />
construction and makes appearance of buildings beautiful. It does not require maintenance such as painting and<br />
plaster repairs.<br />
‣ Precast Elements<br />
‣ Whit Portland Limestone <strong>Cement</strong><br />
Floor tiles, pavement and curbstones, ready-to-use steps and balconies, window frames and city furniture, white<br />
briquettes and white pressed bricks, concrete grates and pool decking, etc.<br />
CEM II / A-L and CEM II / B-L type cements, within the scope of the standard EN 197-1, that are prepared for<br />
general purpose uses by mixing white clinker with some gypsum and limestone (mosaic) in various amounts.<br />
‣ Artworks<br />
Fields of Use<br />
Small concrete sculptures, monuments, modern art applications, restoration of archeological and artistic<br />
structures, sgraffiti, reliefs, etc.<br />
‣ Ready-Mixed Plasters and Mortars, Adhesives and Joint Sealants<br />
Adhesives for tiles, ceramic tiles, marble granite floors; construction joints, repair mortars, industrial floor<br />
mortars, insulation and anchorage mortars, etc.