Engineering Design QA

PHASE 2 COMMENCEMENT OF DETAIL DESIGN – SITE VISIT
To formally kick off the Engineering Design Process in accordance with the project execution plan and to ensure that key engineering strategies /
philosophies are in place.
ACTIVITIES/DELIVERABLE DESCRIPTION DISCIPLINE SUPPORTING DOCUMENTATION
1 Performance Standards &
Verification Scheme
2 Document Distribution
Matrix
3 Structural Integrity
Interface
Confirm safety critical systems / elements and set
appropriate performance standards. ie.
functionality, reliability and survivability. Develop
scheme to allow an independent competent body
to verify the design against the performance
standards.
Create formal document distribution matrix to
ensure all disciplines & departments receive all
necessary design information in a timely manner.
Ensure structural integrity interfaces are
identified & visible to Project, ie Renatus / Client
focal points, Technical Authorities, Independent
Verification Bodies, etc.
4 Material Selection Report Report defining the requirements and
specifications of necessary material.
5 Hazard Management Plan Create Hazard Management Plan identifying all
key hazards (confined space, hazardous materials,
electrical hazards, fall hazards, etc) technical
safety activities and the approach to managing
Major Accident Hazards in the design.
6 Discipline Specifications Develop / confirm baseline specifications,
utilizing specintact specifications where possible.
7 PDMS Catalogues Ensure PDMS catalogues are populated &
available for all affected disciplines, utilizing
online search (making sure to convert data to
generic standards), where possible.
Technical Safety
Project
Engineering
Manager
Structural
Discipline
Technical Safety
ALL.
ALL
Develop and find Hazard Management
Philosophy, Hazard & Risk
Management,; Design Verification
Activities ; Platform Safety Case.
Material Engineering Selection.
Develop of find: Hazard & Risk
Management,; Management of
Functional Safety Guideline
5 | P a g e