Hand Chain Hoists Lever Tools Trolleys Powered Chain Hoists ...

Effective Date – November 24, 2008
Price Schedule HFLU-1108
Prices subject to change without notice.
All prices are in U.S. funds.
Suggested User
Price Book –
Industrial Products
Hand Chain Hoists
Lever Tools
Trolleys
Powered Chain Hoists
Electric Wire Rope Hoists
Electrification
Material Handling Products
Crane Components
Clamps
Hoist Rings
800-888-0985 • www.cmhoists.com
©2008 Columbus McKinnon Corporation Stock Number HFLU-1108
All Rights Reserved. Printed in USA

CM TABLE OF CONTENTS
Ordering Information
...................................................pgs. 1 & 2
Manual Hoist Products
Cyclone ........................................pgs. 2-5
GT Series Grip & Pull Lever Tool .......pg. 8
Hurricane 360° Hand Chain Hoist .....pg. 4
Puller – Chain.....................................pg. 6
Rigger ................................................pg. 8
Series 602 & Series 603 Mini-Hoists...pg. 9
Series 622 Hand Chain Hoist ............pg. 5
Series 653 Lever Tool ........................pg. 8
Shipyard Hooks .................................pg. 8
Short Handle Puller............................pg. 7
Wire Grips..........................................pg. 9
Wire Rope Lever Hoists.....................pg. 9
Manual Trolleys
CBT .................................................pg. 12
Series 632........................................pg. 12
Series 633........................................pg. 12
Series 84A .............................pgs. 10 & 11
Bulk Chain .......................pgs. 13 & 19
Powered Chain Hoists
and Trolleys
Air Hoist Trolleys ...................pgs. 23 & 24
Air Hoist Accessories ...............pgs. 24-26
Airstar ..............................................pg. 22
Airstar 6 ...........................................pg. 23
Lodestar ...................................pgs. 14-16
Lodestar Air XL ................................pg. 27
Lodestar XL ...........................pgs. 16 & 17
Powerstar ..............................pgs. 20 & 21
RailStar Trolley.................................pg. 18
ShopStar..........................................pg. 19
Valustar............................................pg. 18
ShopAir............................................pg. 22
The following are registered trademarks of Columbus McKinnon Corporation registered in U.S. Patent & Trademark Office:
CM, Cyclone, Rigger, Lodestar, Valustar, Powerstar, RailStar, ShopStar, Airstar, Latchlok, Polaris, Apollo, Series 632,
Series 633.
The following are trademarks of Columbus McKinnon Corporation: Protector, ShopAir, LodeRail, Hurricane.
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08

CM TABLE OF CONTENTS
Electric Wire Rope Hoist Products
Apollo.......................................................pg. 28
Polaris ......................................................pg. 28
Ergonomic Material
Handling Products
Air Wire Rope Manipulator ......................pg. 29
Max Balancer .....................................pg. 29
Test Products
Hoist Test Stand .................................pg. 29
Crane Components...........pgs. 30-36
Tractor ............................................pg. 37
Hoist/Trolley Electrification
.................................................pgs. 38-42
Remote Control
Infrared Remote Control .....................pg. 42
Radio Remote Control ........................pg. 42
Variable Frequency Drives ...pg. 42
Manuals, Diagrams ..................pg. 43
CM HOIST PRODUCTS HFLU-1108 11/24/08 i
ALL PRICES ARE IN U.S. FUNDS.

CM TABLE OF CONTENTS
Hoist Rings
180° Pivoting Hoist Rings ............................pg. 47
Heavy Duty – Forged Hoist Rings.................pg. 44
Heavy Duty – Metric Hoist Rings ..................pg. 46
Specialty Engineered –
Machined Hoist Rings...............................pg. 45
Clamps
CG Heavy Duty Girder Clamps.....................pg. 50
CH & HH Heavy Duty Horizontal
Plate Clamps ..............................................pg. 51
CP Pile Pitching & PP Pile Pulling Clamps ...pg. 54
CR Rail Lifting Clamps ..................................pg. 53
CT Heavy Duty T or Channel
Section Clamps..........................................pg. 50
CTP Push Travel Screwlok Trolley .................pg. 55
GS Girder Stacking Clamps..........................pg. 51
HG High Grip Clamps ...................................pg. 49
HGC Hand Grip.............................................pg. 53
Hinged Universal Clamps .............................pg. 48
LJ Gentle Grip Universal Clamps ..................pg. 49
Multi-Rail Lifting Clamps...............................pg. 53
Roller Toe Horizontal Plate Clamps ..............pg. 52
SC92T Twin Screwlok Clamps ......................pg. 55
Screwlok Beam Clamps ...............................pg. 54
Screwlok Beam Clamps with Shackle..........pg. 54
SH Sheet Bundle Horizontal Clamps............pg. 52
TBT Snap-On Trolley.....................................pg. 55
TH Wide Mouth Clamps ...............................pg. 55
THK Horizontal Thin Sheet Clamps..............pg. 52
THS Horizontal with Locking Mechanism ....pg. 52
TSB Wide Jaw Gentle Grip Clamps..............pg. 49
TSG Screwcam Clamps ...............................pg. 53
TSS Gentle Grip Clamps...............................pg. 49
TTG Horizontal Girder Clamps......................pg. 51
TTR Girder Clamps .......................................pg. 50
Universal Clamps..........................................pg. 48
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
ii

CM ORDERING INFORMATION
Cyclone hook suspended hand chain hoist
Capacity: ______________ Ton Lift: __________________ Ft. (10 Ft. lift standard)
Hand Chain Drop: ______________ Ft. (8 Ft. H/C drop standard)
Conventional style hook Upper Lower
Latchlok hook Upper Lower
Cyclone army type & low headroom trolley hoists
Capacity:_______________Ton
Trolley type: Plain Conventional style hook
Geared Latchlok hook
Beam type: Standard S beam
Standard H beam
Wide flange beam
Patented track
Beam size S______________ X __________ lbs. X _________________ in. flange
W _____________ X___________lbs. X _________________ in. flange
WF ____________ X___________lbs. X _________________ in. flange
Geared trolley hand chain drop: _________Ft.
NOTE: Hand chain drop is normally 2 ft. less than lift.
Standard trolleys up to 2 ton will operate on patented rails.
Puller lever tool
Capacity:_______________Ton Lift: ________Ft. (5 ft. lift standard)
Anchor sling Load limiter Load sentry
Latchlok hook Upper Lower
Plain trolleys
CM series 632 CM series 633
Capacity:_______________Ton
Beam type: Standard S beam
Standard H beam
Wide flange beam
Patented track
Beam size S______________ X __________ lbs. X _________________ in. flange
W _____________ X___________lbs. X _________________ in. flange
WF ____________ X___________lbs. X _________________ in. flange
Trolley guards
Series 84, CBTP/CBTG
Plain or Geared
Check all items listed above plus Hand chain drop (8 ft. standard) capacities 1-6 ton
(9 ft. standard) capacities 8 & 10 ton
Lodestar & Lodestar XL electric chain hoists
Capacity:_______________Ton Lift:___________________Ft.
Push button drop: ______________Ft. (Standard drop is 4 ft. less than lift.)
Current: Volts _______________ ____________Phase _____________Hz.
NOTE: All single speed hoists are factory wired for 380-460 volts unless otherwise specified.
Lift speed: _______________FPM Single speed
2 speed
Suspension: Lug Rigid hook Plain trolley
Motor driven trolley
Chain container
_______30 FPM _________75 FPM _______Other
Power cord: Length ___________ft. (15 ft. standard)
Weatherproofing required
Latchlok hook Upper Lower
CM HOIST PRODUCTS HFLU-1108 11/24/08 1
ALL PRICES ARE IN U.S. FUNDS.

CM MANUAL CHAIN HOIST PRODUCTS
SERIES 646
Cyclone
hand chain
hoist
SERIES 645
*Cyclone
army type
trolley hoist
Max. Standard Approx. Hand & Load Hand
capacity lift shipping load chain chain
Product code (tons) (ft.) wt. (lbs.) User price chain only only
4621 ; 10 40 $ 750.00 $ 22.85 $ 11.65 $ 11.20
4722 ; 15 47
4732 ; 20 55
4622 : 10 40
4723 : 15 47
4733 : 20 55
4624 1 10 43
4724 1 15 51
4734 1 20 60
4625 1: 10 70
4725 1: 15 81
4735 1: 20 92
4626 2 10 70
4893 2 15 81
4894 2 20 92
4627 3 10 103
4726 3 15 122
4736 3 20 144
4628 4 10 103
4727 4 15 122
4737 4 20 144
4629 5 10 138
4728 5 15 163
4738 5 20 188
4630 6 10 142
4729 6 15 167
4739 6 20 192
4631 8 10 248
4730 8 15 280
4740 8 20 312
4632 10 10 251
4731 10 15 290
4741 10 20 329
Plain Geared Plain Geared Plain Geared
trolley *trolley trolley trolley trolley trolley
4521 4541 ; 10 69 111 $ 1,295.00 $ 2,146.00 $ 22.85 $ 11.65 $ 11.20
4766 4778 ; 15 76 118
4790 4806 ; 20 84 126
4522 4542 : 10 69 111
4767 4779 : 15 76 118
4791 4808 : 20 84 126
4524 4544 1 10 81 133
4768 4780 1 15 89 141
4792 4814 1 20 97 150
4525 4545 1: 10 140 169
4769 4781 1: 15 152 180
4793 4815 1: 20 164 191
4526 4546 2 10 140 169
4770 4782 2 15 152 180
4794 4816 2 20 164 191
4527 4547 3 10 189 237
4771 4783 3 15 208 256
4795 4817 3 20 226 274
4528 4548 4 10 202 237
4772 4784 4 15 221 256
4796 4818 4 20 239 274
4529 4549 5 10 278 310
4773 4785 5 15 303 335
4797 4819 5 20 328 360
4530 4550 6 10 283 315
4774 4786 6 15 308 340
4798 4820 6 20 333 365
4531 4551 8 10 522 602
4775 4787 8 15 561 634
4799 4821 8 20 600 666
4532 4552 10 10 529 612
4776 4788 10 15 568 651
4800 4822 10 20 607 690
4533 4553 12 10 1,068 1,098
4777 4789 12 15 1,114 1,144
4805 4823 12 20 1,160 1,190
864.25
978.50
750.00
864.25
978.50
883.00
1,009.25
1,135.50
1,184.00
1,319.50
1,455.00
1,350.00
1,485.50
1,621.00
1,860.00
2,075.00
2,290.00
2,214.00
2,429.00
2,644.00
2,635.00
2,929.50
3,224.00
2,654.00
2,948.50
3,243.00
4,002.00
4,376.00
4,750.00
4,315.00
4,768.50
5,222.00
1,409.25 2,260.25
1,523.50 2,374.50
1,295.00 2,146.00
1,409.25 2,260.25
1,523.50 2,374.50
1,471.00 2,186.00
1,597.25 2,312.25
1,723.50 2,438.50
2,030.00 2,439.00
2,165.50 2,574.50
2,301.00 2,710.00
2,030.00 2,439.00
2,165.50 2,574.50
2,301.00 2,710.00
2,818.00 3,224.00
3,033.00 3,439.00
3,248.00 3,654.00
3,710.00 4,408.00
3,925.00 4,623.00
4,140.00 4,838.00
4,126.00 5,181.00
4,420.50 5,475.50
4,715.00 5,770.00
4,215.00 5,262.00
4,509.50 5,556.50
4,804.00 5,851.00
9,612.00 10,149.00
9,986.00 10,523.00
10,360.00 10,897.00
10,220.00 11,104.00
10,673.50 11,557.50
11,127.00 12,011.00
11,941.00 12,733.00
12,474.00 13,266.00
13,007.00 13,799.00
Extra lift per foot
ALL PRICES ARE IN U.S. FUNDS. 2
CM HOIST PRODUCTS HFLU-1108 11/24/08
22.85
25.25
27.10
27.10
43.00
43.00
58.90
58.90
74.80
90.70
22.85
25.25
27.10
27.10
43.00
43.00
58.90
58.90
74.80
90.70
106.60
11.65
14.05
15.90
15.90
31.80
31.80
47.70
47.70
63.60
79.50
11.65
14.05
15.90
15.90
31.80
31.80
47.70
47.70
63.60
79.50
95.40
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20

CM MANUAL CHAIN HOIST PRODUCTS
CM Cyclone hand chain hoists (continued)
SERIES 648
*Cyclone
low headroom
trolley hoist
For non-standard lifts apply additional load & hand chain adders to 10 ft lift model
Add $ 11.20 list for each additional foot of drop on hand chain for geared trolleys. STD hand chain drop 2 ft less than lift.
*Beam size must be specified when ordering
**Latchlok hook kit for
CM Cyclone
Upper
Lower
Approx.
Product Capacity shipping User
code (tons) wgt. (lbs.) price
** Applies to lower hook only for trolley hoists.
Prices also apply for latchlok hooks factory installed as
original equipment.
3
Made in
U.S.A.
Product code
Max. Standard
Approx.
shipping
weight (lbs.) User price
Extra lift per foot
Hand & Load Hand
Plain Geared capacity lift Plain Geared Plain Geared load chain chain
trolley *trolley (tons) (ft.) trolley trolley trolley trolley chain only only
4832 – : 10 91 – $ 1,724.00 – $ 22.85 $ 11.65 $ 11.20
4850 – : 15 98 – 1,838.25 –
4879 – : 20 106 – 1,952.50 –
4834 – 1 10 96 – 1,828.00 – 25.25 14.05 11.20
4851 – 1 15 104 – 1,954.25 –
4880 – 1 20 113 – 2,080.50 –
4835 4925 1: 10 191 215 2,723.00 $ 3,361.00 27.10 15.90 11.20
4853 4874 1: 15 202 226 2,858.50 3,496.50
4881 4887 1: 20 213 237 2,994.00 3,632.00
4836 4926 2 10 191 221 2,723.00 3,361.00 27.10 15.90 11.20
4861 4896 2 15 202 232 2,858.50 3,496.50
4882 4897 2 20 213 243 2,994.00 3,632.00
4837 4927 3 10 210 240 3,270.00 3,581.00 43.00 31.80 11.20
4863 4875 3 15 229 259 3,485.00 3,796.00
4883 4888 3 20 247 277 3,700.00 4,011.00
4838 4928 4 10 315 379 4,372.00 5,332.00 43.00 31.80 11.20
4871 4876 4 15 334 398 4,587.00 5,547.00
4884 4889 4 20 352 416 4,802.00 5,762.00
4839 4929 5 10 338 380 4,878.00 6,131.00 58.90 47.70 11.20
4872 4877 5 15 363 405 5,172.50 6,425.50
4885 4890 5 20 388 430 5,467.00 6,720.00
4840 4930 6 10 387 357 5,061.00 6,426.00 58.90 47.70 11.20
4873 4878 6 15 412 382 5,355.50 6,720.50
4886 4891 6 20 437 407 5,650.00 7,015.00
CM Cyclone army type plain
trolley hoist kits
Maximum Approximate
Product capacity shipping User
code (tons) weight (lbs.) price
4562 ; & : 40 $ 545.00
4564 1 42
591.00
4565 1: 78
756.00
4566 2 78
756.00
1020
1022
1023
1025
1027
1028
1051
1051
1024
1026
1027
; & :
1
1: & 2
3 & 4
5 & 6
8 & 10
; & :
1
1: & 2
3 & 4
5 & 6
2
2
3
4
7
12
2
2
3
7
7
$ 146.00
146.00
179.00
264.00
214.00
473.00
142.00
142.00
179.00
264.00
214.00
CM Cyclone hoist (less chain)
Maximum Approximate
Product capacity shipping User
code (tons) weight (lbs.) price
4641 ; 33 $ 595.00
1028 8 & 10 12 473.00 4642 : 33
595.00
4644 1 34
694.00
4645 1: 34
959.00
4646 2 53 1,116.00
4647 3 70 1,436.00
4648 4 73 1,772.00
4649 5 91 2,007.00
4650 6 95 2,025.00
4651 8 185 3,117.00
4652 10 200 3,246.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM MANUAL CHAIN HOIST PRODUCTS
Hurricane hand chain hoists
Extra lift per foot
Maximum Standard Approx. Hand & Load Hand
Product capacity lift shipping User load chain chain
code (tons) (ft.) weight (lbs.) price chain only only
5623 : 8 18.5 $ 272.00 $ 14.45 $ 7.15 $ 7.30
5624 : 12 23.0
5650 : 15 25.4
5625 : 20 29.3
5651 : 30 37.1
5626 1 8 26.5
5627 1 12 28.7
5652 1 15 32.8
5628 1 20 39.7
5653 1 30 53.5
5629 2 8 42.1
5630 2 12 47.8
5655 2 15 52.5
5631 2 20 60.4
5656 2 30 76.2
5635 3 8 67.9
5636 3 12 76.0
5637 3 20 91.9
5639 5 8 87.7
5640 5 12 95.8
5641 5 20 111.7
5643 10 8 148.5
5644 10 12 166.0
5645 10 20 202.7
CM Cyclone, army type and low headroom trolley
hoist metal chain containers
Product code
329.80
373.15
445.40
589.90
309.00
371.40
418.20
496.20
652.20
446.00
529.60
592.30
696.80
905.80
593.00
676.60
843.80
870.00
1,008.00
1,284.00
2,100.00
2,380.60
2,941.80
14.45
14.45
14.45
14.45
15.60
15.60
15.60
15.60
15.60
20.90
20.90
20.90
20.90
20.90
20.90
20.90
20.90
34.50
34.50
34.50
70.15
70.15
70.15
Standard hand chain drop 2 ft. less than lift. For additional lifts, begin with 8 ft. and add extra charges.
7.15 7.30
7.15 7.30
7.15 7.30
7.15 7.30
8.30 7.30
8.30 7.30
8.30 7.30
8.30 7.30
8.30 7.30
13.60 7.30
13.60 7.30
13.60 7.30
13.60 7.30
13.60 7.30
13.60 7.30
13.60 7.30
13.60 7.30
27.20 7.30
27.20 7.30
27.20 7.30
62.85 7.30
62.85 7.30
62.85 7.30
Approx.
*Bucket Maximum shipping
Cyclone Low headroom length Capacity length of lift weight User
& army type trolley hoist (in.) (tons) (ft.) (lbs.) price
4603CF-374S 4614CF-330S 11 ; – : 10 – 18 4 $ 87.00
4603CF-375S 4614CF-331S 14 ; – : 18.1 – 27 5 87.00
4603CF-376S 4614CF-332S 17 ; – : 27.1 – 36 5 97.00
4603CF-377S 4614CF-333S 20 ; – : 36.1 – 45 6 100.00
4603CF-378S 4614CF-334S 23 ; – : 45.1 – 54 7 106.00
4603CF-379S 4614CF-335S 31 ; – : 54.1 – 78 8 121.00
4603CF-380S 4614CF-336S 36 ; – : 78.1 – 93 9 151.00
4603CF-381S 4614CF-337S 48 ; – : 93.1 – 129 12 188.00
4603CF-382S 4614CF-339S 11 1 11 4 87.00
4603CF-383S 4614CF-340S 14 1 11.1 – 18 5 87.00
4603CF-384S 4614CF-341S 17 1 18.1 – 24 5 97.00
4603CF-385S 4614CF-342S 20 1 24.1 – 31 6 100.00
4603CF-386S 4614CF-343S 23 1 31.1 – 37 6 109.00
4603CF-387S 4614CF-344S 31 1 37.1 – 55 8 121.00
4603CF-388S 4614CF-345S 36 1 55.1 – 66 9 151.00
4603CF-389S 4614CF-346S 48 1 66.1 – 92 12 188.00
4603CF-353S 4614CF-353S 17 1: – 2 10 – 13 5 100.00
4603CF-354S 4614CF-354S 20 1: – 2 13.1 – 16 6 104.00
4603CF-355S 4614CF-355S 23 1: – 2 16.1 – 20 6 111.00
4603CF-356S 4614CF-356S 31 1: – 2 20.1 – 29 8 124.00
4603CF-357S 4614CF-357S 36 1: – 2 29.1 – 35 9 155.00
4603CF-358S 4614CF-358S 48 1: – 2 35.1 – 49 12 190.00
4603CF-360S 4614CF-360S 23 3 – 4 10 6 111.00
4603CF-361S 4614CF-361S 31 3 – 4 10.1 – 15 8 124.00
4603CF-362S 4614CF-362S 36 3 – 4 15.1 – 18 9 155.00
4603CF-363S 4614CF-363S 48 3 – 4 18.1 – 25 12 190.00
4603CF-367S 4614CF-367S 31 5 – 6 10 8 124.00
4603CF-368S 4614CF-368S 36 5 – 6 10.1 – 12 9 155.00
4603CF-369S 4614CF-369S 48 5 – 6 12.1 – 17 12 190.00
4603CF-396S — 48 8 10 – 12 12 190.00
4603CF-397S — 48 10 10 12 190.00
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
4
Hurricane Less Chain
Max. Approx.
Product capacity shipping User
code (tons) wgt. (lbs.) price
5632 : 15 $ 200.00
5633 1 20 226.00
5634 2 29 314.00
5638 3 52 444.00
5642 5 72 593.00
5646 10 174 1,602.00
Made in
U.S.A.
Bucket diameter
for all sizes is 5".

CM MANUAL CHAIN HOIST PRODUCTS
CM series 622 hand chain hoist
Maximum Standard Approximate Hand &
Extra lift per foot
Load Hand
capacity lift shipping load chain chain
Product code (tons) (ft.) weight (lbs.) User price chain only only
2202 : 8 15 $
2216 : 12 22
2208 : 15 25
2231 : 20 30
2263 : 30 38
2204 1 8 22
2217 1 12 29
2210 1 15 30
2262 1 20 38
2264 1 30 48
2206 2 8 57
2218 2 12 65
2213 2 15 71
2233 2 20 80
2272 2 30 85
2207 3 8 85
2230 3 12 93
2214 3 20 109
2209 5 8 82
2215 5 12 96
2234 5 20 123
2212 10 8 164
Standard hand chain drop 2 ft. less than lift.
For additional lifts, begin with 8 ft. and add extra charges.
Imported.
CM cyclone, army type and low headroom
trolley hoist fabric chain bags
Product code Product code
Maximum Bag* Approximate
Cyclone User Low headroom User Capacity length length weight
& army type price trolley price (tons) of lift (ft.) (in.) (lbs.)
2482 $ 146.00 2493 $ 161.00 ; – : 18 7 3
2483 159.00 2494 173.00 ; – : 18.1 – 36 10 3
2484 172.00
– – ; – : 36.1 – 54 13 3
2482 146.00 2493 161.00 1 11 7 3
2483 159.00 2494 173.00 1 11.1 – 24 10 3
2484 172.00
– – 1 24.1 – 37 13 3
– – 2496 216.00 1 37.1 – 55 16 4
2488 159.00 2488 159.00 1: – 2 13 10 3
2489 172.00 2489 172.00 1: – 2 13.1 – 20 13 3
2490 201.00 2490 201.00 1: – 2 20.1 – 29 16 4
2491 263.00 2491 263.00 1: – 2 29.1 – 35 18 4
2492 319.00 2492 319.00 1: – 2 35.1 – 49 20 4
2489 172.00 2489 172.00 3 – 4 10 13 3
2490 201.00 2490 201.00 3 – 4 10.1 – 15 16 4
2491 263.00 2491 263.00 3 – 4 15.1 – 18 18 4
2492 319.00 2492 319.00 3 – 4 18.1 – 25 20 4
2490 201.00 2490 201.00 5 – 6 10 16 4
2491 263.00 2491 263.00 5 – 6 10.1 – 12 18 4
2492 319.00 2492 319.00 5 – 6 12.1 – 17 20 4
2492 319.00 2492 319.00 8 12 20 4
2492 319.00 2492 319.00 10 10 20 4
*Bag size for all models is 7:" x 7:".
5
185.00
241.60
284.05
354.80
496.30
219.00
283.71
326.10
402.60
555.60
339.00
421.40
483.20
586.20
792.20
475.00
618.24
885.40
727.00
863.80
1,137.40
1,828.00
$ 14.15 $ 7.15 $
7.00
15.30 8.30
20.60 13.60
34.20 27.20
34.20 27.20
61.40 54.40
Made in
U.S.A.
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.
7.00
7.00
7.00
7.00
7.00

CM MANUAL CHAIN HOIST PRODUCTS
Series 640
CM Puller lever tool
Max. Standard Approx.
Product capacity lift shipping User Extra lift
code (tons) (ft.) wgt. (lbs.) price per foot
4043 < 5 16 $ 465.00 $ 11.65
4060 < 10 20
4250 < 15 23
4061 < 20 26
4045 1: 5 26
4062 1: 10 31
4251 1: 15 36
4063 1: 20 40
4047 3 5 38
4065 3 10 47
4252 3 15 56
4066 3 20 65
4050 6 5 73
4051 6 10 91
4253 6 15 108
4256 6 20 128
(with Load limiter installed)
4193 < 5 20
4257 < 10 24
4258 < 15 28
4259 < 20 32
4195 1: 5 29
4260 1: 10 35
4261 1: 15 40
4262 1: 20 45
4197 3 5 40
4263 3 10 49
4266 3 15 54
4267 3 20 59
4200 6 5 77
4268 6 10 96
4269 6 15 115
4270 6 20 134
(with Load sentry installed)
4001 < 5 17
4002 1: 5 29
4003 3 5 40
4005 6 5 73
(with Anchor sling installed)
4084 1: 5 28
CM Puller (less chain)
Max. Approx.
Product capacity shipping User
code (tons) wgt. (lbs.) price
4074 < 14 $
4076 1: 21
4078 3 27
4079 6 54
(with Load limiter installed)
4203 < 14
4205 1: 21
4207 3 38
4210 6 73
(with Load sentry installed)
4073 < 15
4075 1: 23
4077 3 29
Made in
U.S.A.
523.25
584.00
639.75
646.00
726.00
811.00
886.00
837.00
997.00
1,169.00
1,317.00
1,590.00
1,910.00
2,262.00
2,599.00
661.00
721.00
781.00
841.00
842.00
925.00
1,007.00
1,091.00
1,033.00
1,200.00
1,364.00
1,531.00
1,786.00
2,117.00
2,449.00
2,780.00
575.00
756.00
947.00
1,700.00
726.00
—
—
—
16.00
—
—
—
32.00
—
—
—
64.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
For additional lifts, begin with 5 ft. lift and add additional charges.
—
—
—
—
—
381.00
530.00
623.00
1,165.00
577.00
726.00
819.00
1,361.00
491.00
640.00
733.00
CM Puller accessories
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
6
Max. Approx.
Product capacity shipping User
code (tons) wgt. (lbs.) price
Load limiter
4190
4191
<
1: – 6
6
6
$ 237.00
237.00
Load Limiter installed as original equipment. All capacities 196.00
Load sentry kit
4096
4098
<
1: – 6
5
5
Load Sentry installed as original equipment. All capacities
Anchor sling
4071
4072
<
1:
3
5
210.00
210.00
110.00
61.00
80.00
Latchlok Hook Kit for CM Puller
Product Capacity
Approx.
shipping User
code (tons) wgt. (lbs.) price
1000 < 2 $ 131.00
Upper
1002
1004
1:
3
2
3
138.00
224.00
1027 6 7 214.00
Lower
1001
1003
1005
<
1:
3
2
2
3
131.00
138.00
224.00
1007 6 6 250.00
Prices also apply for Latchlok Hooks factory installed as
original equipment.
Oil Field Puller Lever Tool
Max. Standard Approx.
Product capacity lift shipping User
code (tons) (ft.) wgt. (lbs.) price
4053 < 5 16 $ 451.00
4055 1: 5 26 627.00
Oil Field Puller (less chain)
Max. Standard Approx.
Product capacity lift shipping User
code (tons) (ft.) wgt. (lbs.) price
4054 < Less chain 14 $ 366.00
4056 1: Less chain 21 509.00

CM MANUAL CHAIN HOIST PRODUCTS
CM Short Handle Puller
Max. Standard Approx.
Made in
U.S.A.
Extra
Product capacity lift shipping User lift
code (tons) (ft.) wgt. (lbs.) price per foot
7300P < 5 16 $ $
7335P < 10 19
7336P < 20 24
7320P 1: 5 27
7340P 1: 10 32
7341P 1: 20 41
7330P 3 5 37
7350P 3 10 47
7351P 3 20 65
(with Load limiter installed)
7337P < 5 16
7342P 1: 5 27
465.00 11.65
523.25 —
639.75
646.00
726.00
886.00
837.00
997.00
1,317.00
Max. Approx.
Product capacity shipping User
code (tons) wgt. (lbs.) price
7301P < 13 $ 381.00
7321P 1: 18
530.00
7331P 3 26
623.00
702.00
883.00
—
16.00
—
—
32.00
—
—
CM Short Handle Puller Less Chain
—
—
For additional lifts, begin with 5 ft. lift and add additional charges.
CM Short Handle Puller Accessories
Max. Approx.
Product capacity shipping User
code (tons) wgt. (lbs.) price
7310P <
Load Limiter
7311P
3
1:-3
$
3
Load Limiter installed as original equipment. All Capacities
Anchor Sling
7309P
7312P
<
1:
3
4
Latchlok Hook Kit for Short
Handle Puller
Max. Approx.
Product capacity shipping User
code (tons) wgt. (lbs.) price
1001* < 2 $
1003 1: 2
1004 3 3
1001 < 2
1003 1: 2
1005 3 3
285.00
285.00
131.00
138.00
224.00
131.00
138.00
224.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 7
ALL PRICES ARE IN U.S. FUNDS.
Upper
Lower
Prices also apply for Latchlok Hooks factory installed as
original equipment.
*For < Ton Short Handle Puller only: When adding upper
Latchlok Hook, must also furnish Load Limiter.
237.00
61.00
80.00

CM MANUAL CHAIN HOIST PRODUCTS
Series 653 lever operated hoists
Max. Standard Approx.
Product capacity lift shipping User
code (tons) (ft.) wgt. (lbs.) price
5310 < 5 19 $
5311 < 10 21
5312 < 15 26
5313 < 20 28
5328 1 5 19
5315 1: 5 31
5316 1: 10 36
5317 1: 15 41
5318 1: 20 45
5329 2 5 31
5320 3 5 51
5321 3 10 59
5330 6 5 78
5331 6 10 94
5332 6 15 110
5333 6 20 126
For additional lifts, begin with 5 ft. lift and add additional charges.

CM MANUAL CHAIN HOIST PRODUCTS
Wire rope lever hoists
Single line Double line Cable
Rated Min. Rated Min.
specifications
Approx.
Product capacity Lift Hdrm. capacity Lift Hdrm. Diam. Length shipping User
code (tons) (ft.) (in.) (tons) (ft.) (in.) (in.) (ft.) wgt. (lbs.) price
04601W : 13< 19 N/A N/A N/A r 7< 8< $ 194.00
04602W : 13: 21 1 6: 27 r 9: 10: 220.00
04610W < 13 21 N/A N/A N/A ; 8: 9: 219.00
04611W < 12: 21 1: 6 27 ; 10: 11: 237.00
04620W < 21: 22: 1: 10; 28: ; 12; 13; 268.00
04621W < 21: 25 1: 10; 23: ; 15 16 300.00
04631W 1 12: 22: 2 6 28: e 12: 13: 288.00
Wire grips
Rated Wire size Wire Size Handle eye Approx.
Product capacity & gauge & gauge opening shipping User
code Model (lbs.) (min.) (max.) (in.) wgt. (lbs.) price
04451W LMG1000 1,000
.04 in.
18 AWG
.394 in.
1/0 AWG .625 dia. : $ 103.00
.109 in. .594 in.
04452W LMG2000 2,000 9 AWG 4/0 1 X 1: 1
135.00
.18 in. .60 in.
04453W LMG4500 5,000 6 AWG 4/0 AWG 1; X 1< 3;
149.00
.30 in. .80 in.
04459W LMG4600 1,000 1 AWG 450 MCM 1; X 1< 4:
216.00
.70 in. 1.25 in.
04471W LMG4800 12,000 397 MCM 1120 MCM 1; X 1< 8
356.00
04465W LMG4700 20,000
.70 in.
397 MCM
1.25 in.
1130 MCM 2: X 3: 21
812.00
AWG = American Wire Gauge / MCM = Thousands of Circular Mills
Mini-Hoists
Rated Approx.
Product capacity Standard shipping User
code Model (lbs.) lift (ft.) wgt. (lbs.) price
0210 Series 602 550 5 6 $ 131.00
0214 Series 602 w/10' lift 550 10 7
166.00
0212 Series 602 Carry Bag .3
16.00
0215 Series 603 1,100 5 7
174.00
0216 Series 603 w/10' lift 1,100 10 8
217.00
0217 Series 603 Carry Bag .3
17.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 9
ALL PRICES ARE IN U.S. FUNDS.

CM MANUAL TROLLEYS
CM Model 84A Trolleys – Plain
Capacity Flange width Approximate Plain Trolley Spark Resistant Trolley
(tons) adjustment range shipping wgt. (lbs.) Product code User price Product code User price
; 2.66" - 5" 23 1641-0025 $ 342.00 1641-0025SR $ 727.00
: 2.66" - 5" 23 1641-0050 342.00 1641-0050SR 727.00
1 3" - 6" 43 1641-0100 388.00 1641-0100SR 727.00
1: 3" - 6" 45 1641-0150 438.00 1641-0150SR 1,082.00
2 3.33" - 6.25" 67 1641-0200 479.00 1641-0200SR 1,082.00
3 3.33" - 6.25" 70 1641-0300 632.00 1641-0300SR 1,699.00
4 4" - 7" 155 1641-0400 762.00 1641-0400SR 1,981.00
5 4" - 7" 160 1641-0500 1,034.00 1641-0500SR 2,004.00
6 4" - 7" 160 1641-0600 1,034.00 1641-0600SR 2,004.00
8 4.62" - 8" 300 1641-0800 1,608.00 1641-0800SR 3,389.00
10 4.62" - 8" 310 1641-1000 2,057.00 1641-1000SR 4,442.00
12 4.62" - 8" 310 1641-1200 2,057.00 1641-1200SR 4,545.00
16 6" - 8" 800 1641-1600 4,000.00 1641-1600SR 8,989.00
20 6" - 8" 845 1641-2000 4,382.00 1641-2000SR 9,457.00
25 6" - 8" 1,045 1631-2500 4,853.00 1631-2500SR 9,980.00
30 7" - 8" 1,920 – – 1631-3000SR 18,801.00
40 7" - 8" 2,176 1631-4000 11,127.00 1631-4000SR 19,615.00
50 7" - 8" 2,676 1631-5000 13,548.00 1631-5000SR 22,036.00
CM Model 84A Trolleys – Geared
Capacity Flange width Approximate Geared Trolley Spark Resistant Geared Trolley
(tons) adjustment range shipping wgt. (lbs.) Product code User price Product code User price
; 2.66" - 5" 38 1642-0025 $ 595.00 1642-0025SR $ 1,137.00
: 2.66" - 5" 38 1642-0050 595.00 1642-0050SR 1,137.00
1 3" - 6" 62 1642-0100 660.00 1642-0100SR 1,277.00
1: 3" - 6" 65 1642-0150 714.00 1642-0150SR 1,390.00
2 3.33" - 6.25" 90 1642-0200 765.00 1642-0200SR 1,488.00
3 3.33" - 6.25" 93 1642-0300 1,012.00 1642-0300SR 1,860.00
4 4" - 7" 184 1642-0400 1,130.00 1642-0400SR 2,328.00
5 4" - 7" 188 1642-0500 1,459.00 1642-0500SR 2,516.00
6 4" - 7" 188 1642-0600 1,459.00 1642-0600SR 2,516.00
8 4.62" - 8" 347 1642-0800 2,066.00 1642-0800SR 3,731.00
10 4.62" - 8" 360 1642-1000 2,886.00 1642-1000SR 5,284.00
12 4.62" - 8" 360 1642-1200 2,886.00 1642-1200SR 5,315.00
16 6" - 8" 895 1642-1600 5,060.00 1642-1600SR 11,268.00
20 6" - 8" 955 1642-2000 5,730.00 1642-2000SR 12,373.00
25 6" - 8" 1,200 1632-2500 6,461.00 1632-2500SR 12,765.00
30 7" - 8" 2,015 1632-3000 12,467.00 1632-3000SR 22,291.00
40 7" - 8" 2,286 1632-4000 13,813.00 1632-4000SR 23,641.00
50 7" - 8" 2,831 1632-5000 16,265.00 1632-5000SR 26,034.00
NOTE: Standard hand chain drop is 8 feet – zinc plated. For longer than standard 8 foot, add $6.80 8.00 per foot of drop.
NOTE: Standard hand chain drop is 8 feet – spark resistant. For longer than standard 8 foot, add $8.00 9.70 per foot of drop.
Made in
U.S.A.
Made in
U.S.A.
ALL PRICES ARE IN U.S. FUNDS. 10
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM MANUAL TROLLEYS
CM Model 84A Trolleys – Plain (For Wide Flange Beams)
Capacity Flange width Plain Trolley Spark Resistant Trolley
(tons) adjustment range Product code User price Product code User price
; 5=" - 7" 1641-0025A $ 417.00 1641-0025ASR $ 774.00
: 5=" - 7" 1641-0050A 417.00 1641-0050ASR 774.00
1 6=" - 8" 1641-0100A 463.00 1641-0100ASR 822.00
1: 6=" - 8" 1641-0150A 512.00 1641-0150ASR 1,031.00
2 6>" - 8;" 1641-0200A 607.00 1641-0200ASR 1,165.00
3 6>" - 8;" 1641-0300A 762.00 1641-0300ASR 1,308.00
4 7=" - 9" 1641-0400A 949.00 1641-0400ASR 1,936.00
5 7=" - 9" 1641-0500A 1,208.00 1641-0500ASR 2,109.00
6 7=" - 9" 1641-0600A 1,208.00 1641-0600ASR 2,109.00
8 8=" - 10" 1641-0800A 1,880.00 1641-0800ASR 3,547.00
10 8=" - 10" 1641-1000A 2,332.00 1641-1000ASR 4,566.00
12 8=" - 10" 1641-1200A 2,332.00 1641-1200ASR 4,669.00
16 8=" - 10" 1641-1600A 4,381.00 1641-1600ASR 9,070.00
20 8=" - 10" 1641-2000A 4,772.00 1641-2000ASR 9,533.00
CM Model 84A Trolleys – Geared (For Wide Flange Beams)
Capacity Flange width Geared Trolley Spark Resistant Geared Trolley
(tons) adjustment range Product code User price Product code User price
; 5=" - 7" 1642-0025A $ 664.00 1642-0025ASR $ 1,206.00
: 5=" - 7" 1642-0050A 664.00 1642-0050ASR 1,206.00
1 6=" - 8" 1642-0100A 737.00 1642-0100ASR 1,310.00
1: 6=" - 8" 1642-0150A 791.00 1642-0150ASR 1,418.00
2 6>" - 8;" 1642-0200A 900.00 1642-0200ASR 1,569.00
3 6>" - 8;" 1642-0300A 1,147.00 1642-0300ASR 1,817.00
4 7=" - 9" 1642-0400A 1,308.00 1642-0400ASR 2,268.00
5 7=" - 9" 1642-0500A 1,638.00 1642-0500ASR 2,609.00
6 7=" - 9" 1642-0600A 1,638.00 1642-0600ASR 2,609.00
8 8=" - 10" 1642-0800A 2,339.00 1642-0800ASR 3,879.00
10 8=" - 10" 1642-1000A 3,052.00 1642-1000ASR 5,385.00
12 8=" - 10" 1642-1200A 3,052.00 1642-1200ASR 5,416.00
16 8=" - 10" 1642-1600A 5,451.00 1642-1600ASR 11,610.00
20 8=" - 10" 1642-2000A 6,134.00 1642-2000ASR 12,308.00
NOTE: Standard hand chain drop is 8 feet – zinc plated. For longer than standard 8 foot, add $6.80 8.00
per foot of drop.
NOTE: Standard hand chain drop is 8 feet – spark resistant. For longer than standard 8 foot, add $8.00 9.70 per foot of drop.
11
Made in
U.S.A.
Made in
U.S.A.
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM MANUAL TROLLEYS
CM Series 632 plain ball bearing trolley CM Series 633 plain ball bearing trolley
Max. Std. Std. Approx.
Product capacity beam flange shipping User
code (tons) height (in.) width (in.) wt. (lbs.) price
3222 ; & : 4-12 2?-5q 10 $ 152.00
3224 1 4-12 2?-5q 12
3226 1: & 2 6-15 3>-5? 25
3230 3 8-18 4-6; 33
Prices apply to standard flange adjustments.
Apply for prices on other than standard.
CBT Trolleys – Plain
Made in
U.S.A.
186.00
304.00
534.00
Max. Std. Std. Approx.
Product capacity Beam flange shipping User
code (tons) height (in.) width (in.) wt. (lbs.) price
3302 : 3-15 2:-5? 17 $ 149.00
3304 1 5-24 3-8 36 176.00
3306 2 6-24 3?-8 53 293.00
3307 3 8-24 4-8 100 498.00
3309
Imported
5 10-24 4?-8 179 753.00
Standard I-Beam Minimum Wheel tread Approx.
Capacity* Product beam height width radius curve diameter shipping User
(tons) code (in.) (in.) (in.) (in.) wt. (lbs.) price
; CBTP0025 4-24 2.0-8.7 27 2.36 19 $ 142.00
: CBTP0050 4-24 2.0-8.7 27 2.36 19 142.00
1 CBTP0100 5-24 2.3-8.7 36 2.36 26 171.00
1: CBTP0150 6-24 2.3-8.7 45 3.15 46 279.00
2 CBTP0200 6-24 2.3-8.7 45 3.15 46 279.00
3 CBTP0300 8-24 3.0-8.7 55 4.41 86 484.00
5
* Metric Rated
CBTP0500 10-24 3.5-8.7 70 4.92 130 672.00
CBT Trolleys – Geared
Standard I-Beam Minimum Wheel tread Approx.
Capacity* Product beam height width radius curve diameter shipping User
(tons) code (in.) (in.) (in.) (in.) wt. (lbs.) price
1 CBTG0100 5-24 2.3-8.7 36 2.36 45 $ 583.00
1: CBTG0150 6-24 2.3-8.7 45 3.15 66 776.00
2 CBTG0200 6-24 2.3-8.7 45 3.15 69 776.00
3 CBTG0300 8-24 3.0-8.7 55 4.41 111 1,055.00
5
* Metric Rated
CBTG0500 10-24 3.5-8.7 70 4.92 158 1,479.00
NOTE: Standard hand chain drop is 15 feet. For longer than standard 15 foot, add $6.80 per foot of drop.
7.30
ALL PRICES ARE IN U.S. FUNDS. 12
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM BULK CHAIN
Rated Chain Chain Chain Approx.
Made in
U.S.A.
Drum
Hoist capacity drum per ft. price Diameter Length per shipping user
description (tons) code code per ft. (in.) Description drum ft. wgt. (lbs.) price
Hurricane/Series 622 ; - : 85005 85834 $ 7.5 .197 Load Chain 250 90 $ 1,837.50
Hurricane/Series 622 1 85002 85959 8.55 .236 Load Chain 250 143 2,137.50
Series 622 1: - 10 85003 85960 14.00 .394 Load Chain 200 305 2,800.00
Hurricane 2 85029 635131 14.00 .312 Load Chain 200 176 2,800.00
Hurricane 3 85003 85960 14.00 .394 Load Chain 200 305 2,800.00
Hurricane 10 — 85970 21.60 .394 Load Chain — — —
Cyclone ; - : 85928 85839 12.00 ; Load Chain 250 152 3,000.00
Cyclone ; - : 85007 85839 12.00 ; Load Chain 500 304 6,000.00
Cyclone 1 85930 85841 14.45 e Load Chain 200 150 2,890.00
Cyclone 1 85008 85841 14.45 e Load Chain 500 366 7,225.00
Cyclone 1: - 10 85932 85864 16.40 > Load Chain 200 274 3,280.00
Cyclone 1: - 10 85010 85864 16.40 > Load Chain 500 688 8,200.00
Cyclone ; - 10 85927 85808 5.75 H Hand Chain 250 116 1,437.50
Cyclone ; - 10 85006 85808 5.75 H Hand Chain 500 228 2,875.00
Series 622 ; - 10 85997 85832 3.60 .192 Hand Chain 250 75 900.00
Hurricane : - 10 — 04307654 3.83 .192 Hand Chain — — —
CM (disc grade) load chain for hand chain hoists
CM (disc grade) load chain for lever tools
Rated Chain Chain Chain Length Approx. Drum
Hoist capacity drum per ft. price Diameter per shipping user
description (tons) code. code per ft. (in.) drum ft. wgt. (lbs.) price
Puller/ Short Handle Puller < 85928 85839 $ 12.00 ; 250 152 $ 3,000.00
Puller/ Short Handle Puller < 85007 85839 12.00 ; 500 304 6,000.00
Puller/ Short Handle Puller 1: - 6 85931 85847 16.50 s 200 190 3,300.00
Puller/ Short Handle Puller 1: - 6 85009 85847 16.50 s 500 439 8,250.00
Rigger < - 1: 85924 85843 6.90 r 250 88 1,725.00
Series 602 ; 02801 02100004 7.00 .157 — — —
Series 603 : — 02100009 7.90 .157 — — —
Series 637/653 < - 1 85002 85959 8.55 .236 250 143 2,137.50
Series 637 1: 85004 85961 13.50 .276 250 190 3,375.00
Series 653 1: - 2 85029 635131 14.00 .312 200 176 2,800.00
Series 653 3 85003 85960 14.00 .394 200 305 2,800.00
Series 653 6 — 85960 14.00 .394 — — —
Series 637 3-6 85003 85960 14.00 .394 200 305 2,800.00
CM (star grade) load chain for Lodestar/Valustar electric chain hoist
Rated Chain Chain Chain Length Approx. Drum
capacity Hoist drum per ft. price Diameter per shipping user
(tons) Model code Finish code Finish* per ft. (in.) drum ft. wgt. (lbs.) price
=, :
:, 1
A, AA, B, C, F, WB, WF
E, H, WH
85999
85023
Zinc
B/O
85944
85889
Zinc
B/O
$ 13.90 ; 250 148 $ 3,475.00
=, :
:, 1
A, AA, B, C, F, WB, WF
E, H, WH
85011
85021
Zinc
B/O
85944
85889
Zinc
B/O
13.90 ; 500 304 6,950.00
: - 3 J, JJ, L, LL, R, RR, RT, RRT , WL, WR
85996
85024
Zinc
B/O
85949
85979
Zinc
B/O
17.70 s 200 194 3,540.00
: - 3 J, JJ, L, LL, R, RR, RT, RRT, WL, WR
85012
85025
Zinc
B/O
85949
85979
Zinc
B/O
17.70 s 500 475 8,850.00
=, :
:, 1
A, AA, B, C, F, WB, WF, WB, WF
E, H, WH
85016
85022
Zinc
B/O
85944
85889
Zinc
B/O
13.90 ; 1,000 600 13,900.00
: - 3 J, JJ, L, LL, R, RR, RT, RRT, WL, WR
85017
85026
Zinc
B/O
85949
85979
Zinc
B/O
17.70 s 1,000 940 17,700.00
CM (star grade) load chain for Lodestar XL electric & air chain hoist
Chain Chain Approx. Drum
Chain drum per ft. price Diameter Length per shipping user
code code per ft. (in.) Description drum ft. wgt. (lbs.) price
80276 85885 $ 22.90 t Load Chain 250 450 $ 5,725.00
85933 85885 22.90 t Load Chain 500 885 11,450.00
CM (star grade) load chain for Powerstar electric chain hoist
Chain Chain Approx. Drum
Chain drum per ft. price Diameter Length per shipping user
code code per ft. (in.) Description drum ft. wgt. (lbs.) price
— 85794 $ 33.85 u Load Chain — 2.96#/ft. $ 33.85/ft.
Note: See chain charts in master distributor catalog for specific lengths required.
See maintenance manuals for re-chaining instructions and testing procedures. * B/O (burnished & oiled) Standard Finish
For Shopstar Chain, see page 19. For ShopAir Chain, see page 26.
13
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM ELECTRIC CHAIN HOIST PRODUCTS
CM Lodestar electric chain hoists & accessories
Single
speed
10' lift
Single
speed
15' lift
Single
speed
20' lift
Two
speed
10' lift
Product code
less suspension
230/460
Hoist
lifting
Capacity speed
Approximate
shipping wgt. (lbs.)
Hoist
*User price
Hook or low Low
headroom headroom
Made in
U.S.A.
Motor Driven
Trolley, lug,
115-1-60 3-60 Model (tons) FPM 115-1-60 230/460 only Lug trolley, lug & hoist & hoist
2702 2705 A = 32 54 60 $ 1,735.00 $ 1,787.00 $ 2,079.00 $ 4,687.00
2712
2722
2715
2725
AA
B
=
;
60
16
67
53
64
61
1,952.00
2,029.00
2,004.00
2,081.00
2,296.00
2,373.00
4,904.00
4,981.00
2732 2735 C ; 32 61 64 2,139.00 2,191.00 2,483.00 5,091.00
2742 2745 E : 8 71 69 2,228.00 2,314.00 2,606.00 5,220.00
2752
3512
—
2755
3515
3545
F
J
JJ
:
:
:
16
32
64
61
110
—
65
110
117
2,333.00
2,577.00
3,736.00
2,385.00
2,650.00
3,809.00
2,677.00
2,942.00
4,101.00
5,285.00
5,563.00
6,722.00
2762 2765 H 1 8 72 73 2,450.00 2,536.00 2,828.00 5,442.00
3522 3525 L 1 16 113 110 2,600.00 2,673.00 2,965.00 5,586.00
— 3555 LL 1 32 — 117 3,670.00 3,743.00 4,035.00 6,656.00
3532 3535 R 2 8 131 130 3,177.00 3,290.00 3,819.00 6,164.00
— 3565 RR 2 16 — 135 4,103.00 4,216.00 4,745.00 7,090.00
9501 9505 RT 3 5.5 158 158 3,696.00 4,031.00 4,861.00 7,456.00
— 9508 RRT 3 11 — 162 4,350.00 4,685.00 5,515.00 8,110.00
3101 3103 A = 32 59 64 1,830.00 1,882.00 2,174.00 4,782.00
3111 3113 AA = 60 67 79 2,047.00 2,099.00 2,391.00 4,999.00
3121
3131
3123
3133
B
C
;
;
16
32
61
66
64
75
2,124.00
2,234.00
2,176.00
2,286.00
2,468.00
2,578.00
5,076.00
5,186.00
3141
3151
4212
3143
3153
4214
E
F
J
:
:
:
8
16
32
70
67
118
80
72
115
2,390.50
2,428.00
2,690.50
2,476.50
2,480.00
2,763.50
2,768.50
2,772.00
3,055.50
5,382.50
5,380.00
5,676.50
— 4244 JJ : 64 — 123 3,849.50 3,922.50 4,214.50 6,835.50
3161 3163 H 1 8 80 85 2,612.50 2,698.50 2,990.50 5,604.50
4222 4224 L 1 16 120 114 2,713.50 2,786.50 3,078.50 5,699.50
— 4254 LL 1 32 — 122 3,783.50 3,856.50 4,148.50 6,769.50
4232 4234 R 2 8 140 138 3,376.50 3,489.50 4,018.50 6,363.50
— 4264 RR 2 16 — 144 4,302.50 4,415.50 4,944.50 7,289.50
9502 9506 RT 3 5.5 174 171 3,981.50 4,316.50 5,146.50 7,741.50
— 9509 RRT 3 11 — 176 4,635.50 4,970.50 5,800.50 8,395.50
3102 3104 A = 32 64 68 1,925.00 1,977.00 2,269.00 4,877.00
3112 3114 AA = 60 72 74 2,142.00 2,194.00 2,486.00 5,094.00
3122 3124 B ; 16 64 72 2,219.00 2,271.00 2,563.00 5,171.00
3132 3134 C ; 32 69 76 2,329.00 2,381.00 2,673.00 5,281.00
3142 3144 E : 8 80 88 2,553.00 2,639.00 2,931.00 5,545.00
3152
4213
—
3154
4215
4245
F
J
JJ
:
:
:
16
32
64
71
124
—
76
124
128
2,523.00
2,804.00
3,963.00
2,575.00
2,877.00
4,036.00
2,867.00
3,169.00
4,328.00
5,475.00
5,790.00
6,949.00
3162 3164 H 1 8 86 90 2,775.00 2,861.00 3,153.00 5,767.00
4223 4225 L 1 16 124 119 2,827.00 2,900.00 3,192.00 5,813.00
— 4255 LL 1 32 — 127 3,897.00 3,970.00 4,262.00 6,883.00
4233 4235 R 2 8 148 148 3,576.00 3,689.00 4,218.00 6,563.00
— 4265 RR 2 16 — 156 4,502.00 4,615.00 5,144.00 7,489.00
9503 9507 RT 3 5.5 187 184 4,267.00 4,602.00 5,432.00 8,027.00
— 9510 RRT 3 11 — 194 4,921.00 5,256.00 6,086.00 8,681.00
230-3-60 460-3-60 TWO SPEED THREE PHASE ONLY
2707 2708 A2 = 10/32 67 73
2717 2718 AA2 = 20/60 74 75
2727 2728 B2 ; 5/16 67 73
2737 2738 C2 ; 10/32 73 74
2747 2748 E2 : 2.5/8 76 82
2757 2758 F2 : 5/16 74 74
3502 3503 J2 : 10/32 116 117
3549 3550 JJ2 : 21/64 130 130
2767 2768 H2 1 2.5/8 83 84
3504 3505 L2 1 5/16 116 117
3553 3554 LL2 1 10/32 130 131
3506 3507 R2 2 2.5/8 134 135
3561 3562 RR2 2 5/16 149 149
9511 9513 RT2 3 1.75/5.5 161 176
9512 9514 RRT2 3 3.5/11 176 174
*When ordering use product code plus suspension code listed on pg 11.
When ordering, specify code number(s), model,
Example:
capacity, beam size, power supply, suspension, lift,
extra control cord or power cord (if required) and
type of electrification (if required).
460 volt Model L Lodestar with 10 ft. lift & 75 f.p.m. motor
driven trolley.
Note: Base price of 10' lift hoist must be used for any modification.
Select:
Hoist only + MDT lug + Motor Driven Trolley = List Price
Code 3525 + Code 3679 + Code 3672 = List Price
$ 2,600.00 + $ 112.00 + $ 2,874.00 = $ 5,586.00
UNITS LISTED ARE NOT CSA APPROVED
CSA UNITS AVAILABLE UPON REQUEST
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
14
2,097.00
2,314.00
2,392.00
2,504.00
2,592.00
2,697.00
3,259.00
4,418.00
2,811.00
3,285.00
4,356.00
3,859.00
4,783.00
4,379.00
5,030.00
2,149.00
2,366.00
2,444.00
2,556.00
2,678.00
2,749.00
3,332.00
4,491.00
2,897.00
3,358.00
4,429.00
3,972.00
4,896.00
4,714.00
5,365.00
2,441.00
2,658.00
2,736.00
2,848.00
2,970.00
3,041.00
3,624.00
4,783.00
3,189.00
3,650.00
4,721.00
4,501.00
5,425.00
5,544.00
6,195.00
5,049.00
5,266.00
5,344.00
5,456.00
5,584.00
5,649.00
6,245.00
7,404.00
5,803.00
6,271.00
7,342.00
6,846.00
7,770.00
8,139.00
8,790.00

CM ELECTRIC CHAIN HOIST PRODUCTS
CM Lodestar hoist modification charges
Begin with standard 10' lift and add extra charges.
Extra Extra
chain control
per ft. cord
Voltage Models of lift per ft.
115-1-60
or
230/
460-3-60
A-AA-B-C-F $ 13.50
E-H
27.00
J-JJ-L-LL 17.20 $
R-RR
RT-RRT
Lodestar Extras
1. Weatherproofing(hoist only)....... N/C
2. Acid protection (hoist only) ........ N/C
3. Power cord strain relief ............ 45.95
4. Extra power cord
(standard length, 15 ft.) ............ 5.50
34.40
51.60
5.50
5. Extra control cord (standard
length, 4 ft. less than lift) .... 5.50
6. Acid protection low
headroom trolley.................. N/C
7. Thermal switch (Klixon)
in hoist motor ...................... 49.00
CM Lodestar electric hoist suspensions
Approx.
Product shipping User
code Models wgt. (lbs.) price
2788 A-AA-B-C-F 2 $ 52.00
Rigid hook
2789
3651
E-H
J-L-JJ-LL
4
4
86.00
73.00
3658 R-RR 8 113.00
9559 RT-RRT 7 335.00
Rigid latchlok 2790 A-AA-B-C-F 3 194.00
hook
3652 J-L-JJ-LL 5 215.00
2792 A-AA-B-C-F 2 52.00
2793 E-H 4 86.00
Swivel hook 3661 J-L-JJ-LL 4 73.00
3660 R-RR 8 113.00
9557 RT-RRT 7 335.00
Swivel
latchlok hook
2796
3662
3663
A-AA-B-C-F
J-L-JJ-LL
R-RR
3
5
9
194.00
215.00
310.00
Rigid lug
for low
headroom
trolley
2778
2779
3677
3668
A-AA-B-C-F
E-H
J-L-JJ-LL
R-RR
2
3
4
6
52.00
86.00
73.00
113.00
9561 RT-RRT 5 335.00
2992 A-AA-B-C-F 2 78.00
Rigid lug
2993 E-H 3 118.00
for motor 3679 J-L-JJ-LL 4 112.00
driven trolley 3668 R-RR 6 113.00
9561 RT-RRT 5 335.00
Extra charge for CM Lodestar equipped
with latchlok hooks
Approx.
Product shipping User
code Models wgt. (lbs.) price
1050 A, AA, B, C, F 2 $ 142.00
1052 E & H 2 173.00
Upper 1054 J, JJ, L & LL 2 142.00
1056 R & RR 10 197.00
1059 RT & RRT 6 243.00
1051 A, AA, B, C & F 2 142.00
1053 E & H 2 173.00
Lower 1051
1057
J, JJ, L & LL
R &RR
2
4
142.00
197.00
1060 RT & RRT 6 321.00
CM Lodestar protector kit
Product
Approx.
shipping User
code Models wgt. (lbs.) price
2876 A, A2 5 $ 158.00
2877 AA,AA2 5 158.00
2878 B, B2, E E2 4 158.00
2879 C, C2 5 158.00
2880 F, F2, H, H2 5 158.00
3601 J, J2 8 227.00
3602 JJ, JJ2 8 284.00
3603 L, L2, R, R2, RT, RT2 9 227.00
3604 LL,LL2, RR, RR2, RRT, RRT, RRT2 9 284.00
15
CM Lodestar chain containers complete
Maximum length of lift (ft.)
Made in
U.S.A.
†Bucket Approx. Models Models Models
Product length shipping A,AA,B, Models J,JJ, Models RT & User
code (in.) wgt. (lbs.) C&F E&H L&LL R&RR RRT price
2450 8 4 10 – – – – $
2451 11 5 20 10 10 – –
2452 14 5 30 15 15 – –
2453 17 6 40 20 20 10 –
2454 20 7 50 25 25 – –
2455 23 7 60 30 30 15 10
2456 31 9 90 45 40 20 –
2457 36 10 100 50 60 30 20
2458 48 13 140 *70 90 45 30
2461 10 13 44 22 20 14 9
2463 15 15 104 52 66 33 22
2464 20 17 166 83 106 53 35
2465 25 20 230 115 144 72 48
2466 30 23 290 145 150 90 60
For lifts greater than listed (special)...apply.
† Advise if bucket length causes headroom problems, larger
diameter shorter length buckets available.
* E & H limit switch maximum is 60 ft.
When ordering, specify code number(s), model, capacity, beam
size, power supply, suspension, lift, extra control cord or power
cord (if required) and type of electrification (if required).
✩ NEW: Fabric chain bags now available - see next page ✩
CM Lodestar Protective Covers
Product code Fits User price
2704 V1 - Models A-F, E & H $ 75.00
3514 V2 - Models J-RRT 82.00
CM Low headroom trolley (series 635)*
Max. Approx.
Product capacity shipping User
code (tons) Models wgt. (lbs.) price
3575 = to 1 A thru LL 23 $
3569 2 R thru RR 52
9576 3 RT thru RRT 80
* Rigid lug suspension required for attaching to hoist. Prices
apply to standard flange adjustments. Apply for prices on other
than standard.
CM Lodestar motor driven trolley
(series 635)* 75 FPM & 30 FPM
Product
code Capacity Power
Approx. shipping
wgt. (lbs.) User
75 FPM 30 FPM (tons) supply 75 FPM 30 FPM price
3670 9315 = to 2 115-1-60 118 113 $ 2,874.00
3671 9316 = to 2 230-3-60 118 116 2,874.00
3672 9317 = to 2 460-3-60 118 117 2,874.00
9577 9318 3 115-1-60 120 118 3,425.00
9578 9319 3 230-3-60 120 118 3,425.00
9579 9320 3 460-3-60 123 119 3,425.00
* Rigid lug suspension required for attaching to hoist. Prices
apply to standard flange adjustments. Apply for prices on other
than standard.
Apply for other speed prices. Std. P.B. Drop is 16' - 3" on MDT
Lodestar Motor Driven Trolley Extras
1. Power cord (standard 2' 6")
price per foot of extra length................$
2. Control cord (standard 16' 3")
price per foot of extra drop ....................
3. Trolley brake–on new units add ..............
4. Eye type suspension adapter
(2 ton max.)–hook suspension
hoists add (Code 36653) ........................ 219.00
5. Weatherproofing (MDT only).................... 73.10
6. Acid protection(MDT only) ...................... N/C
7. Two speed control MDT .......................... 1,009.70
(3 phase only)
8. Thermal switch (Klixon) in trolley
motor ...................................................... 49.00
292.00
529.00
830.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.
5.50
5.50
530.00
57.00
57.00
61.00
63.00
81.00
84.00
87.00
155.00
328.00
415.00
430.00
443.00
457.00
469.00

CM LODESTAR XL ELECTRIC CHAIN HOIST
CM Lodestar fabric chain bags
Maximum length of lift in feet
*Bag Approx.
Product Models Models length shipping User
code A, AA, B, C, F E, H (in.) wgt. (lbs.) price
2470 20 10 7 3 $ 149.00
2471 40 20 10 3
162.00
2472 60 30 13 3
173.00
2473 90 45 16 4
205.00
2474 100 60 18 4
269.00
2475 140 90 20 4
324.00
Models Models Models
J,JJ,L,LL R, RR RT, RRT
2476 10 — — 7 3
149.00
2477 20 10 — 10 3
162.00
2478 30 15 10 13 3
173.00
2479 45 20 – 16 4
205.00
2480 60 30 20 18 4
269.00
2481 90 45 30 20 4
295.00
*Bag size for all models is 7 1/2” x 7 1/2”.
CM Series 652 Lodestar XL electric chain hoist
Capacity
Speed
Slow/Fast
Product
code† User price
User price with type of trolley
(tons) Reeving (fpm) 230/460-3-60 with Hook Plain Geared Motor Driven
2 1 18 5201 $ 5,240.00 $ 5,726.00 $ 6,062.00 $ 7,629.00
2 1 24 5204
5,685.00 6,171.00 6,507.00 8,074.00
2 1 30 5265
6,124.00 6,610.00 6,946.00 8,513.00
2 1 6/18 •
5,570.00 6,057.00 6,393.00 7,959.00
2 1 8/24 •
6,016.00 6,503.00 6,839.00 8,405.00
3 2 9 5209
5,756.00 6,434.00 6,897.00 8,530.00
3 2 12 5212
6,164.00 6,842.00 7,305.00 8,938.00
3 2 15 5267
6,573.00 7,251.00 7,714.00 9,347.00
3 2 3/9 •
6,014.00 6,692.00 7,155.00 8,789.00
3 2 4/12 •
6,422.00 7,100.00 7,563.00 9,197.00
4 2 9 5215
5,955.00 6,890.00 7,540.00 9,069.00
4 2 12 5218
6,065.00 7,000.00 7,650.00 9,179.00
4 2 15 5269
6,176.00 7,111.00 7,761.00 9,290.00
4 2 3/9 •
6,599.00 7,533.00 8,184.00 9,713.00
4 2 4/12 •
6,709.00 7,643.00 8,294.00 9,823.00
5 3 6 5221
6,248.00 7,112.00 7,714.00 9,127.00
5 3 8 5224
6,665.00 7,545.00 8,159.00 9,598.00
5 2 9 5279
6,963.00 7,843.00 8,457.00 9,896.00
5 2 12 5283
7,260.00 8,140.00 8,754.00 10,193.00
5 2 15 5285
7,438.00 8,302.00 8,905.00 10,317.00
5 3 2/6 •
6,994.00 7,859.00 8,461.00 9,875.00
5 3 2.7/8 •
7,447.00 8,329.00 8,942.00 10,383.00
5 2 3/9 •
7,768.00 8,650.00 9,263.00 10,704.00
6 3 6 5227
7,469.00 8,361.00 8,982.00 10,438.00
6 3 8 5230
7,949.00 8,858.00 9,491.00 10,975.00
6 3 10 5287
8,287.00 9,196.00 9,829.00 11,313.00
6 3 2/6 •
8,240.00 9,132.00 9,751.00 11,209.00
6 3 2.7/8 •
8,759.00 9,668.00 10,299.00 11,784.00
7: 3 6 5289 —
9,095.00 9,746.00 11,275.00
7: 3 10 5291 —
9,153.00 9,791.00 11,292.00
7: 3 2/6 • —
9,903.00 10,554.00 12,081.00
NOT CSA APPROVED
All units shown contain 10 ft. lift.
† Add suffix to product code:
H for Hook Suspension, P for Plain Trolley, G for Geared Trolley or M for Motor Driven Trolley, (hook suspension not available on 7 1⁄2 ton capacity).
For two speed units, use single speed product code and specify two speed.
Specify exact Voltage requirements – standard voltages are 230 or 460-3-60.
ALL PRICES ARE IN U.S. FUNDS. 16
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM LODESTAR XL ELECTRIC CHAIN HOIST
Lodestar XL Hoist Options
Description
Price
Power Cord (standard 2: ft.) $ 5.50
Control Cord
(hook and lug mount only – 6 ft. standard)
5.50
Hand Chain for Geared Trolley
(standard 8'-0" of drop)
11.80
Hoist Weatherproofing (NEMA 3R)
134.60
Acid Protection (Hoist only) No Charge
Acid Protection (Hoist & Trolley)
134.60
Control Circuit (24 or 48 volt) (Hoist)
Thermal Overload Protection
128.00
Klixon ............................................................... Std.
Add for first relay.............................................. 752.80
Add for each additional relay (for two speed) .. 376.45
Special Power Supply
380-3-50 .......................................................... N/C
575-3-60 .......................................................... 162.35
Max. Lift that std. factory installed
limit switches will allow
Standard Long Lift
Capacity Speed Switch (ft.) Switch (ft.)
(tons) Reeving (fpm) (N/C) $75.00 96.00
18 120 152
2 Single 24 130 165
30 212 269
9 60 76
3 12 65 82
15 106 134
9 60 76
4 2-part 12 65 82
15 106 134
9 60 76
5 12 65 82
15 106 134
6 40 50
8 43 55
6 40 50
6 3-part 8 43 55
10 71 89
7: 6 40 50
10 71 89
Additional lift over standard 10 ft. – per foot add:
2 Ton – 1 Part Reeving $ 22.25
3, 4, 5 Ton – 2 Part Reeving
44.50
5, 6, 7: Ton – 3 Part Reeving
66.75
Extra charge for Lodestar XL hoist
with upper/lower Latchlok Hook
2 Ton Lower $ 180.00
2 Ton Upper
161.00
3-6 Ton Lower
413.40
3-6 Ton Upper
414.00
XL Hoist Chain Containers
Maximum length of lift in feet
Bucket 1 part 2 part 3 part
Product Length Net 2 3, 4, 5 5, 6, 7:
Code (In.) Wt. Ton Ton Ton Price
5241 10 12 30 15 10 $ 423.00
5281 15 16 54 27 18 438.00
5242 20 20 80 40 26 452.00
5282 25 23 108 54 36 465.00
5243 30 26 135 67 45 478.00
2 Ton Trolley Options
Description
Control Circuit (24 or 48 volt) (Trolley)
Special Power Supply
$
380-3-50..........................................................
575-3-60..........................................................
Two Extra Single Speed Buttons
Two Extra Two Speed Buttons
On/Off (for mainline disconnect)
Mushroom Stop
Key Selector
3-Position Selector
Flange adjustment
(std. S6x12.5x33 Price
46.95
Std.
162.35
196.90
240.80
199.65
195.50
Apply
Apply
⁄8" thru S15x42.9x5:") Std.
S Beams over 5:" thru 7?"
Wide Flange over 5s" thru 7t"
136.70
136.70
S Beams over 7?" thru 8"
Wide Flange over 7t" thru 9u"
289.70
289.70
Two Speed Adder
Apply
Trolley Brake (2 Ton)
299.00
Trolley Weatherproofing (NEMA 3R)
Std.
3-7: Ton Trolley Options
Description
Flat tread wheels for patented track
(will not negotiate switches)
$
2 Spd Trolley Added (3:1 ratio)
Trolley Brake
Weatherproofing (MDT)
Ballast Resistor
Mainline Disconnect Panel
Fuse Panel for over current protection
Flange adjustment (std. 4"-61 ⁄4")
Over 63 ⁄8" thru 85 ⁄8"
Over 83 Price
324.80
337.30
413.20
266.60
304.60
720.20
261.55
99.15
⁄4" thru 11"
142.10
Additional lift over 10 ft.
Plated Chain – per foot add:
2 Ton – 1 Part Reeving $ 23.10
3, 5 Ton – 2 Part Reeving
46.20
5, 6, 7: Ton – 3 Part Reeving
69.30
CM HOIST PRODUCTS HFLU-1108 11/24/08 17
ALL PRICES ARE IN U.S. FUNDS.

Single
speed
10' lift
Single
speed
15' lift
Single
speed
20' lift
CM ELECTRIC CHAIN HOIST
CM Valustar electric chain hoists with rigid hook suspension
Product code
Hoist
Max. lifting
Approximate
shipping wt. (lbs.)
230/460 capacity speed 230/460 User
115-1-60 3-60 Model tons FPM 115-1-60 3-60 price
2401 2402 WB ; 16 54 58 $ 1,614.00
2403 2404 WF : 16 60 58 1,929.00
2405 2406 WH 1 8 70 68 2,095.00
2407 2408 WL 1 16 105 106 2,213.00
2409 2410 WR 2 8 130 122 2,700.00
2401B 2402B WB ; 16 64 62
2403B 2404B WF : 16 64 62
2405B 2406B WH 1 8 77 75
2407B 2408B WL 1 16 111 112
2409B 2410B WR 2 8 136 128
2401C 2402C WB ; 16 68 66
2403C 2404C WF : 16 68 66
2405C 2406C WH 1 8 84 82
2407C 2408C WL 1 16 116 117
2409C 2410C WR 2 8 150 142
For lifts other than standard.
Begin with 10 ft. lift and add extra charges per below.
Apply Extra Extra Extra
if lift chain control power
exceeds per ft. cord cord
Voltage (ft.) Models of lift per ft. per ft.
115-1-60 120 WB, WF $ 13.50
or 60 WH 27.00 $ 5.50 $ 5.50
230/ 120 WL
460-3-60 60 WR
17.20
34.40
• Standard lifts are 10, 15, and 20 feet.
• Extra lift can be added.
• 5 foot power cord standard.
• Push button drop 4 feet shorter than lift.
CM Valustar fabric chain bags
Maximum length of lift (ft.)
*Bag Approx.
Product Models Model length shipping User
code W, B, WF WH (in.) wgt. (lbs.) price
2470 20 10 7 3 $ 149.00
2471 40 20 10 3 162.00
2472 60 30 13 3 173.00
2473 90 45 16 4 205.00
2474 100 60 18 4 269.00
2475 140 90 20 4 324.00
*Bag size for all models is 7:" x 7:"
1,709.00
2,024.00
2,257.50
2,326.50
2,899.50
1,804.00
2,119.00
2,420.00
2,440.00
3,099.00
CM Valustar metal chain
containers complete
†Bucket
Maximum length of lift (ft.)
Approx.
Product length Models Model Model Model shipping User
code (in.) WB, WF WH WL WR wgt. (lbs.) price
2450 8 10 — — — 4 $
2451 11 20 10 10 — 5
2452 14 30 15 15 — 5
2453 17 40 20 20 10 6
2454 20 50 25 25 — 7
2455 23 60 30 30 15 7
2456 31 90 45 40 20 9
2457 36 100 50 60 30 10
2458 48 140 *70 90 45 13
For lifts greater than listed (special)...apply.
† Advise if bucket length causes headroom problems, larger
diameter shorter length buckets available.
Model H maximum is 60 ft.
When ordering, specify code number(s), model, capacity,
beam size, power supply, suspension, lift, extra control cord or
power cord (if required) and type of electrification (if required).
ALL PRICES ARE IN U.S. FUNDS. 18
CM HOIST PRODUCTS HFLU-1108 11/24/08
57.00
57.00
61.00
63.00
81.00
84.00
87.00
155.00
328.00
Maximum length of lift (ft.)
*Bag Approx.
Product Model Model length shipping User
code WL WR (in.) wgt. (lbs.) price
2476 10 — 7 3 $ 149.00
2477 20 10 10 3 162.00
2478 30 15 13 3 173.00
2479 45 20 16 4 205.00
2480 60 30 18 4 269.00
2481 90 45 20 4 295.00
CM RailStar motor driven trolley
Travel Std. Std. Approx.
Product Capacity speed Power beam flange shipping User
code (tons) (FPM) supply height (in.) width (in.) wt. (lbs.) price
0300 = to 2 78 230/460-3-60 6-18 3>-6 108 $ 2,022.00
0301 = to 2 78 115-1-60 6-18 3>-6 107 2,022.00
0302 3 78 230/460-3-60 8-24 4-7 185 2,392.00
0303 3 78 115-1-60 8-24 4-7 184 2,392.00
Universal hook plate and 4 button single speed control station included.
Standard P.B. drop is 16 ft. Standard Power Cord length is 4 ft. Imported.
Made in
U.S.A.
NOT CSA APPROVED

CM ELECTRIC CHAIN HOIST
CM ShopStar electric chain hoist
** Product Code
Max.
capacity
Lifting
speed Lift
Approx.
shipping
User Price
with rigid
115-1-60 115-1-60 230-3-60 460-3-60 (lbs.) F.P.M. Reeving ft.* wgt. (lbs.) hook suspension
2070 — — — 250 16 single 10 26 $ 1,083.00
— 2069 2071 2072 250 16 single 10 28 1,212.00
— — 2076 2077 250 24 single 10 28 1,240.00
— — 2081 2082 250 40 single 10 28 1,270.00
2000 — — — 300 16 single 10 26 1,083.00
— 2047 2026 2029 300 16 single 10 28 1,212.00
2002 — — — 300 16 single 15 28 1,159.25
— — 2027 2030 300 16 single 15 29 1,288.25
2004 — — — 300 16 single 20 28 1,235.50
— — 2028 2031 300 16 single 20 30 1,364.50
— — 2086 2087 300 24 single 10 28 1,240.00
— — 2074 2075 300 40 single 10 28 1,270.00
2095 — — — 500 8 double 10 32 1,271.00
— 2094 2096 2097 500 8 double 10 34 1,398.00
2090 — — — 500 12 single 10 26 1,327.00
— 2089 2091 2092 500 12 single 10 28 1,459.00
— — 2080 2084 500 16 single 10 28 1,487.00
— — 2101 2102 500 20 double 10 34 1,455.00
— — 2099 2100 500 24 single 10 28 1,515.00
2001 — — — 600 8 double 10 32 1,271.00
— 2048 2035 2038 600 8 double 10 34 1,398.00
2003 — — — 600 8 double 15 35 1,396.00
— — 2036 2039 600 8 double 15 37 1,523.00
2005 — — — 600 8 double 20 37 1,521.00
— — 2037 2040 600 8 double 20 39 1,648.00
— — 2106 2107 600 12 double 10 34 1,427.00
— — 2105 2114 600 20 double 10 34 1,455.00
2110 — — — 1,000 6 double 10 32 1,516.00
— 2109 2111 2112 1,000 6 double 10 34 1,586.00
— — 2116 2117 1,000 8 double 10 32 1,598.00
— — 2119 2121 1,000 12 double 10 32 1,613.00
* For lifts other than standard begin with 10 ft. lift and add extra charges.
Extra PB cord (standard drop 4 feet shorter than lift) $4.10/ft. 5.50
Extra power cord (standard length 6 ft.) $4.10 5.50/ft.
Extra chain per ft. of lift: $7.60 9.75 single chain units, $15.20 19.50double
chain units
** Contactor in PB station
These models do not contain CUL Approval.
*** Lower Latchlok Hook Installed – $ 131.00
CM ShopStar vinyl chain container
Maximum length
of lift (ft.)
Approx.
Product Single Double shipping User
code reeved reeved wgt. (lbs.) price
2063 10 5 1 $ 46.00
2064 20 10 1.4 52.00
2065 40 20 1.4 61.00
2066 80 40 1.4 66.00
2067 120 60 2.2 113.00
CM (Stargrade) ShopStar load chain
Chain Chain Chain Approx.
drum per ft. price Diameter Length per shipping User
code code per ft. (in.) Description drum (ft.) wgt. (lbs.) price
— 85988 $ 9.75 .157 Load Chain — — $ 9.75
85018 85988 9.75 .157 Load Chain 250 66 2,511.00
85019 85988 9.75 .157 Load Chain 500 126 5,021.00
85020 85988 9.75 .157 Load Chain 1,000 244 10,043.0
— 85989 11.20 .157 Z/P Load Chain — —
11.20
19
Made in
U.S.A.
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM ELECTRIC CHAIN HOIST PRODUCTS
CM Series 670 Powerstar electric chain hoist & accessories Made in
U.S.A.
Single speed / standard lift 20 feet
When ordering specify code number(s), capacity, speed, lift, power supply, suspension, and beam size.
Standard power supply 230-3-60 or 460-3-60 – apply for other voltages not covered in User Extra Prices.
Maximum Hoist MDT Motor
230-3-60 460-3-60 capaclty lifting speed Hoist speed Plain † Geared driven
Code Code (tons) (FPM) H/P (FPM) Lug trolley trolley trolley
7300 7301 20 5 65 or 100 $ 8,699.00 $ 9,352.00 $ 9,837.00 $
7001 7002 24 5 65 or 100
7304 7305 2 32 5 65 or 100
7005 7006 40 5 65 or 100
7308 7309 48 7.5 65 or 100
7312 7313 20 5
7009 7010 3 24 5 50
7316 7317 32 7.5
7013 7014 40 7.5
7320 7321 10 5
7324 7325 12 5
7328 7329 4 16 5 50
7332 7333 20 7.5
7336 7337 24 7.5
7340 7341 10 5
7344 7345 12 5
7029 7030 5 16 5 50
7348 7349 20 7.5
7017 7018 24 7.5
7352 7353 10 5
7052 7053 6 12 5 50
7356 7357 16 7.5
7056 7057 20 7.5
7360 7361 7 5
7364 7365 8 5
7368 7369 7- 11 5 35
7372 7373 14 7.5
7376 7377 16 7.5
7380 7381 7 5
7384 7385 9 8 5 35
7388 7389 11 7.5
7392 7393 13 7.5
7396 7397 7 5
7400 7401 10 8 5 35
7404 7405 11 7.5
7408 7409 13 7.5
7412 7413 5 5
7416 7417 12 6 5 35
7420 7421 8 7.5
7424 7425 10 7.5
7428 7429 4 5
7432 7433 15 5 5 35
7436 7437 6 7.5
7440 7441 8 7.5
Extra charge for CM Powerstar hoists
equipped with Latchlok lower hook
(NOT available Over 6 Ton)
Capacity Product code User price
2 & 3 ton 1083 $ 204.00
4 – 5 ton 1084
321.00
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
20
8,699.00 9,352.00
9,387.00 10,040.00
9,387.00 10,040.00
10,310.00 10,963.00
9,258.00 10,724.00
9,258.00 10,724.00
9,666.00 11,132.00
9,666.00 11,132.00
10,025.00 11,491.00
10,025.00 11,491.00
10,025.00 11,491.00
10,369.00 11,835.00
10,369.00 11,835.00
10,025.00 11,491.00
10,025.00 11,491.00
10,025.00 11,491.00
10,369.00 11,835.00
10,369.00 11,835.00
10,163.00 11,629.00
10,163.00 11,629.00
10,584.00 12,050.00
10,584.00 12,050.00
14,525.00 14,525.00
14,525.00 14,525.00
14,525.00 14,525.00
14,869.00 14,869.00
14,869.00 14,869.00
15,810.00 15,810.00
15,810.00 15,810.00
16,125.00 16,125.00
16,125.00 16,125.00
15,871.00 15,871.00
15,871.00 15,871.00
16,216.00 16,216.00
16,216.00 16,216.00
17,579.00 17,579.00
17,579.00 17,579.00
18,181.00 18,181.00
18,181.00 18,181.00
21,371.00 21,371.00
21,371.00 21,371.00
21,611.00 21,611.00
21,611.00 21,611.00
User price
9,837.00
10,525.00
10,525.00
11,448.00
10,835.00
10,835.00
11,243.00
11,243.00
11,602.00
11,602.00
11,602.00
11,946.00
11,946.00
11,602.00
11,602.00
11,602.00
11,946.00
11,946.00
11,740.00
11,740.00
12,161.00
12,161.00
15,285.00
15,285.00
15,285.00
15,629.00
15,629.00
16,566.00
16,566.00
16,881.00
16,881.00
16,627.00
16,627.00
16,972.00
16,972.00
18,120.00
18,120.00
18,722.00
18,722.00
21,686.00
21,686.00
21,926.00
21,926.00
†Includes hand chain drop for standard 20 ft. lift. Extra
hand chain for geared trolley per ft. of drop – $ 11.80 9.60.
CSA Modifications Extra
11,879.00
11,879.00
12,567.00
12,567.00
13,490.00
12,858.00
12,858.00
13,266.00
13,266.00
13,625.00
13,625.00
13,625.00
13,969.00
13,969.00
13,625.00
13,625.00
13,625.00
13,969.00
13,969.00
13,763.00
13,763.00
14,184.00
14,184.00
17,201.00
17,201.00
17,201.00
17,545.00
17,545.00
18,393.00
18,393.00
18,708.00
18,708.00
18,454.00
18,454.00
18,799.00
18,799.00
20,106.00
20,106.00
20,708.00
20,708.00
23,525.00
23,525.00
23,765.00
23,765.00

CM Powerstar electric chain hoist two speed/standard lift 20 feet
When ordering specify code number(s), capacity, speed, lift, power supply, suspension, and beam size.
Standard power supply 230-3-60 or 460-3-60 – apply for other voltages not covered in User Extra Prices.
Maximum Hoist MDT
User price
230-3-60 460-3-60 capaclty lifting speed Hoist speed Plain †Geared Motor driven
Code Code (tons) (FPM) HP (FPM) Lug trolley trolley trolley
7302 7303 20/7 5/1.7 65 or 100
7003 7004 24/8 5/1.7 65 or 100
7306 7307 2 32/11 5/1.7 65 or 100
7007 7008 40/13 5/1.7 65 or 100
7310 7311 48/16 7.5/2.5 65 or 100
7314 7315 20/7 5/1.7
7011 7012 3 24/8 5/1.7 50
7318 7319 32/11 7.5/2.5
7015 7016 40/13 7.5/2.5
7322 7323 10/3 5/1.7
7326 7327 12/4 5/1.7
7330 7331 4 16/5 5/1.7 50
7334 7335 20/7 7.5/2.5
7338 7339 24/8 7.5/2.5
7342 7343 10/3 5/1.7
7346 7347 12/4 5/1.7
7031 7032 5 16/5 5/1.7 50
7350 7351 20/7 7.5/2.5
7019 7020 24/8 7.5/2.5
7354 7355 10/3 5/1.7
7054 7055 6 12/4 5/1.7 50
7358 7359 16/5 7.5/2.5
7058 7059 20/7 7.5/2.5
7362 7363 7/2 5/1.7
7366 7367 8/3 5/1.7
7370 7371 7- 11/4 5/1.7 35
7374 7375 14/5 7.5/2.5
7378 7379 16/5 7.5/2.5
7382 7383 7/2 5/1.7
7386 7387 9 8/3 5/1.7 35
7390 7391 11/4 7.5/2.5
7394 7395 13/4 7.5/2.5
7398 7399 7/2 5/1.7
7402 7403 10 8/3 5/1.7 35
7406 7407 11/4 7.5/2.5
7410 7411 13/4 7.5/2.5
7414 7415 5/2 5/1.7
7418 7419 12 6/2 5/1.7 35
7422 7423 8/3 7.5/2.5
7426 7427 10/3 7.5/2.5
7430 7431 4/1 5/1.7
7434 7435 15 5/1.5 5/1.7 35
7438 7439 6/2 7.5/2.5
7442 7443 8/2.5 7.5/2.5 35
CM Powerstar Accessories
Special lift
For lifts over 20' begin with standard 20' lift and proper
suspension plus appropriate extras for limit switches, chain,
chain container, and/or control cord. No credit allowed for less
than standard 20' lift.
Extra
Parts Max. chain
Maximum of capacity per ft.
Voltage lift ft. Reeving (tons) of lift
Refer 1 2 & 3 $
230-3-60 to 2 4 – 6
or User 3 7- – 10
460-3-60 Extra 4 12
Pricing 5 15
21
11.80
CM Powerstar extras
1. Power cord – (standard 2- ft.)
price per ft. of extra length .....................................................$ 9.15
2. Control cord – drop is normallly 4 ft. less than lift
unless otherwise specified on order.
price per ft. of extra drop*......................................................... 7.10
3. Trolley brake........................................................................... 299.00
Refer to user extra prices for options/accessories not
included in this standard unit.
*Includes corresponding external chain strain relief and hardware.
Acid protective paint (Hoist only)
Std.
Hoist with plain, geared, or MDT................................................... 141.80
Weather proofing standard ............................................................ N/C
† Includes hand chain drop for standard 20 ft. lift. Extra hand chain for geared trolley per ft. of drop – $9.60 .
CSA Modifications Extra
32.85
65.70
98.55
131.40
164.25
Made in
U.S.A.
$ 9,905.00 $ 10,558.00 $ 11,043.00 $ 13,085.00
9,905.00 10,558.00 11,043.00 13,085.00
11,478.00 12,131.00 12,616.00 14,658.00
11,478.00 12,131.00 12,616.00 14,658.00
13,285.00 13,938.00 14,423.00 16,465.00
11,346.00 12,812.00 12,923.00 14,946.00
11,346.00 12,812.00 12,923.00 14,946.00
12,325.00 13,791.00 13,902.00 15,925.00
12,325.00 13,791.00 13,902.00 15,925.00
12,081.00 13,547.00 13,658.00 15,681.00
12,081.00 13,547.00 13,658.00 15,681.00
12,081.00 13,547.00 13,658.00 15,681.00
13,066.00 14,532.00 14,643.00 16,666.00
13,066.00 14,532.00 14,643.00 16,666.00
12,081.00 13,547.00 13,658.00 15,681.00
12,081.00 13,547.00 13,658.00 15,681.00
12,081.00 13,547.00 13,658.00 15,681.00
13,066.00 14,532.00 14,643.00 16,666.00
13,066.00 14,532.00 14,643.00 16,666.00
12,217.00 13,683.00 13,794.00 15,817.00
12,217.00 13,683.00 13,794.00 15,817.00
13,252.00 14,718.00 14,829.00 16,852.00
13,252.00 14,718.00 14,829.00 16,852.00
16,330.00 16,330.00 17,090.00 19,006.00
16,330.00 16,330.00 17,090.00 19,006.00
16,330.00 16,330.00 17,090.00 19,006.00
16,673.00 16,673.00 17,433.00 19,349.00
16,673.00 16,673.00 17,433.00 19,349.00
17,616.00 17,616.00 18,372.00 20,199.00
17,616.00 17,616.00 18,372.00 20,199.00
17,931.00 17,931.00 18,687.00 20,514.00
17,931.00 17,931.00 18,687.00 20,514.00
17,675.00 17,675.00 18,431.00 20,258.00
17,675.00 17,675.00 18,431.00 20,258.00
18,022.00 18,022.00 18,778.00 20,605.00
18,022.00 18,022.00 18,778.00 20,605.00
19,383.00 19,383.00 19,924.00 21,910.00
19,383.00 19,383.00 19,924.00 21,910.00
19,986.00 19,986.00 20,527.00 22,513.00
19,986.00 19,986.00 20,527.00 22,513.00
22,497.00 22,497.00 22,812.00 24,651.00
22,497.00 22,497.00 22,812.00 24,651.00
22,750.00 22,750.00 23,065.00 24,904.00
22,750.00 22,750.00 23,065.00 24,904.00
CM Powerstar long lift chain containers–extra charges
Chain container up to 20' lift included in hoist price
2 & 3 Ton
Maximum length of lift, feet
4-6 Ton 7-10 Ton 12 Ton 15 Ton Length Dia.
User
price
40 — — — — 20" 10" $ 124.00
60 30 — — — 30" 10" 272.00
86 43 — — — 40" 10" 525.00
— — 26 — — 28" 14" 607.00
— — 33 25 — 34" 14" 736.00
— — 54 40 32 48" 14" 866.00
Apply for greater lifts.
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM AIR HOISTS & ACCESSORIES
CM AirStar Air Hoists
Capacities 500 to 2000 Pounds
Pull Cord Control
Swivel Hook Suspension
Pull Cord
Control
CM AirStar Air Hoists
Capacities 500 to 2000 Pounds
Pendant Throttle Control
**Lifting **Lowering
speed speed Approx.
Cap. Product max max shipping User
Type (tons) code FPM FPM wgt. (lbs.) price
Link Chain ; 7400C 65 95 36 $ 2,648.00
Standard - 7401C 45 120 36 2,654.00
Model 1 7402C 23 60 49 3,263.00
Link Chain
> 7403A 60 100 36
Spark
< 7404A 29 52 49
Resistant
Roller
Chain
;
-
1
7400A
7401A
7402A
65
45
23
95
120
60
37
37
51
NOTE: Air Inlet size is >" NPTF.
Swivel Hook Suspension
Add-on Prices For Other than 10 foot lifts*
Standard Chain Plated Link Chain
Roller Link Add for each Pendant
Capacity chain chain additional hose
(tons) models models foot of lift drop (ft.)
;, - $ 27.82 $ 13.38 $ 13.38
$ 5.64
1
55.66 26.75
26.75
5.64
> spark resistant
< spark resistant
—
—
50.59
101.20
—
—
5.64
5.64
NOTE: Air Inlet size is >" NPTF.
3,267.00
4,141.00
2,780.00
2,780.00
3,412.00
**Lifting **Lowering
speed speed Approx.
Cap. Product max max shipping User
Type (tons) code FPM FPM wgt. (lbs.) price
Link Chain ; 7400D 65 95 46 $ 3,144.00
Standard - 7401D 45 120 46 3,148.00
Model 1 7402D 23 60 59 3,758.00
Link Chain
Spark
Resistant
>
<
7403B
7404B
60
29
100
52
46
59
3,771.00
4,641.00
Roller
Chain
;
-
1
7400B
7401B
7402B
65
45
23
95
120
60
47
47
61
3,284.00
3,284.00
3,916.00
**Price add-on for additional lift includes pull cords.
**Speeds based on 90 psi line pressure and with full rated hoist load. Hoist speeds are adjustable and can be reduced to 50% of full rated
speed. Shipped from factory with hoisting speed set at maximum rated speed, lowering speed set at reduced speed.
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
22
Pull Cord
Control
Lug Suspension
**Lifting **Lowering
speed speed Approx.
Cap. Product max max shipping User
Type (tons) code FPM FPM wgt. (lbs.) price
Link Chain ;
Standard -
7400F
7401F
65
45
95
120
36
36
$ 2,648.00
2,654.00
Model 1 7402F 23 60 49 3,263.00
Link Chain
> 7403C 60 100 36
Spark
< 7404C 29 52 49
Resistant
Lug Suspension
3,267.00
4,141.00
**Lifting **Lowering
speed speed Approx.
Cap. Product max max shipping User
Type (tons) code FPM FPM wgt. (lbs.) price
Link Chain
Standard
;
-
7400G
7401G
65
45
95
120
46
46
$ 3,144.00
3,148.00
Model 1 7402G 23 60 59 3,758.00
Link Chain
Spark
Resistant
>
<
7403D
7404D
60
29
100
52
46
59
3,771.00
4,641.00
Equipped with 6' pendant control hose assembly, maximum
pendant drop is 72 ft.
NOTES: 10' lifts are standard, longer lifts available. Equipped with 6'
pendant control hose. Speeds based on 90 psi line pressure with full
rated hoist load. Rated air supply is 48 cfm (full load - full speed). Always
install a filter and lubricator in air line for each hoist.
Add-on Prices for Other Than Standard 10' Lifts
To compute total price of hoist with other than standard 10' lift, add to the
price of desired 10' lift hoist the additional charges as instructed below:
1. If control hose is to be lengthened, add the charge for each additional
foot of hose over 6 feet.
2. If load chain is to be lengthened add the charge for each
additional foot of lift over 10 feet.
CM ShopAir compact Air Hoist
Capacities 250, 300, 500, 600 & 1,000 Pounds / Pendant Throttle Control – Hook Suspension only
Full load Full load Parts Net
Capacity Product hoist speed lowering speed of load weight User
(lbs.) code (FPM) (FPM) chain (lbs.) price
250 2178 31 83 1 30 $ 1,624.00
300 2180 31 83 1 30 1,624.00
500 2182 21 55 1 30 1,754.00
500 2179 16 42 2 34 1,806.00
600 2181 16 42 2 34 1,806.00
1,000 2183 11 29 2 34 1,938.00
NOTE: Air Inlet size is >" NPTF.
Top Hook Only for lifts other than standard 10 ft. (add extra charges)
Extra pendant hose (standard 6 ft.) $6.00 6.00/ft.
Extra chain per ft. of lift $8.10 9.75 (Single Chain Units) - $16.20 19.50 (Double Chain Units)
Metal chain containers are included as standard on all 1/4 & 1/2 ton
models with 25 ft. lift or less and 1-ton models with 22 ft lift or less
except for spark-resistant models and roller chain models.
To price hoists with chain containers for lifts greater than standard
lifts mentioned, deduct $93.00 from 1/4 & 1/2 hoists and $191.00
from 1 ton hoists and add appropriate chain container from page 25.

CM AIRSTAR AIR HOISTS & ACCESSORIES
CM AirStar 6 Air Hoists
Capacities 1 to 3 Tons
Pendant Throttle Control
Swivel Hook Suspension – Standard Models
Full load Full load Parts Approx.
Cap. Product hoist speed lowering of load shipping User
(tons) code FPM speed chain wgt. (lbs.) price
1 *7405A 13 18 1 93 $ 4,108.00
*7405B 30 42 95 4,211.00
2 *7406A 6 9 2 110
*7406B 15 21 112
3 *7407A 4 6 3 144
*7407B 10 14 146
Swivel Hook Suspension – Spark Resistant Models
- *7408A 16 22 1 95 $ 5,211.00
1 *7409A 8 11 2 112 5,994.00
2 *7410A 5 7 3 146 7,331.00
Lug Suspension – Standard Models
Full load Full load Parts Approx.
Cap. Product hoist speed lowering of load shipping User
(tons) code FPM speed chain wgt. (lbs.) price
1 *7405C 13 18 1 106 $
*7405D 30 42 108
2 *7406C 6 9 2 116
*7406D 15 21 118
3 *7407C 4 6 3 164
*7407D 10 14 166
Lug Suspension – Spark Resistant Models
- *7408B 16 22 1 110 $ 5,211.00
1 *7409B 8 11 2 120 5,994.00
2 *7410B 5 7 3 170 7,331.00
*Standard models all with 10' Lift Only.
NOTE: Air Inlet size is >" NPTF.
NOTES: 10' Lifts are standard, longer lifts available. Equipped
with 6' pendant control hose. Speeds based on 90 psi line pressure
with full rated hoist load. Rated air supply is 80 cfm (full load – full
speed). Always install a filter and lubricator in air line for each hoist.
Add-on Prices for Other Than Standard 10' Lifts
To compute total price of hoist with other than standard 10' lift, add to
the price of desired 10' lift hoist the additional charges as instructed
below as follows:
1. If control hose is to be lengthened, add the charge for each
additional foot of hose over 6 feet.
2. If load chain is to be lengthened, add the charge for each
additional foot of lift over 10 feet.
Standard Models
User price
5,057.00
5,159.00
5,871.00
5,973.00
Load chain Pendant
Plated Load Chain
Capacity per hose per Each additional
(tons) foot lift foot lift foot of lift
1 $ 16.98 $ 9.08
$ 16.98
2
33.97
9.08
33.97
3
50.96
9.08
50.96
Spark Resistant Models
- $ 74.87
9.08
–
1 149.74
9.08
–
2 224.61
9.08
–
*Pendant hose per foot lift when ordered with motor driven trolley.
Standard Pendant Control Drop is 6'.
Maximum Pendant Control Drop is 36'.
When ordering always specify lift and pendant drop.
Polyethylene chain containers are included as standard on all 1-ton models with 28 ft
or less, 2-ton models with 20 ft lift or less and 3-ton models with 16 ft lift or less
except for spark-resistant models.
To price hoists with chain containers for lifts greater than standard lifts mentioned,
deduct $84.00 for 1-ton, $136.00 for 2-ton or $153.00 for 3-ton from standard hoist
list price and add appropriate metal chain container from page 25.
4,108.00
4,211.00
5,057.00
5,159.00
5,871.00
5,973.00
Air Hoist – Rigid Mount Trolleys
Push-Type Models – Capacities 500 to 6000 Pounds
Trolleys for Standard Flange I-Beams
Adj. to fit
these beam sizes*
Approx.
Product Capacity Min. Beam Flange shipping User
code (tons) depth (in.) width (in.) wgt. (lbs.) price
7417A ;, - 4 2? – 4? 15 $
7418A 1 5 3 – 5 23
*7419A 2 6 3> – 6 43
*7420A 3 6 3> – 6 75
Spark Resistant Models
7424A > 4 2? – 4? 15 $ 1,678.00
†7425A - & < 5 3 – 5 23 1,813.00
††*7426A 1 6 3> – 6 45 2,108.00
**PUT03H 2 6 4 – 6; 85 763.00
Trolleys for Wide Flange I-Beams
7418B 1 5 5; – 7> 24 $ 302.00
*7419B 2 6 6; – 8@ 44 431.00
*7420B 3 6 6= – 8@ 52 686.00
*7420C 3 6 9 – 11 78 741.00
*Equipped with bumpers
**For AirStar 6 Only
†For use on AirStar 6 – - Ton & Airstar < Ton Spark Resistant Hoist
††For use on AirStar 6 – 1 Ton Spark Resistant Hoist
Air Hoist – Rigid Mount Trolleys
Hand-Geared Models
Capacities 2000, 4000 & 6000 Pounds
Trolleys for Standard Flange I-Beams
Adj. to fit
these beam sizes*
Approx.
Product Capacity Min. Beam Flange shipping User
code (tons) depth (in.) width (in.) wgt. (lbs.) price
*7421A 1 6 3 – 5 40 $
*7422A 2 7 3> – 6 57
*7423A 3 7 3> – 6 92
Spark Resistant Models
*7427A - – < 6 3 – 5 40 $
*7428A 1 7 3> – 6 57
†HGT03HA 2 6 4 – 6; 100
Trolleys for Wide Flange I-Beams
*7421B 1 5 5; – 7> 41 $
*7422B 2 6 6; – 8@ 58
*7423B 3 6 6= – 8@ 100
*7423C 3 6 9 – 11 102
** Equipped with bumpers. Hand Chain Drop is 9'-6".
**For flange widths not shown, apply to factory. Smallest radius
curves that these trolleys will negotiate are same as push-type
trolleys. Spark and corrosion models – Equipped with bronze
wheels and vinyl covered bumpers.
† For AirStar 6 Only
For longer than standard 9'-6" hand chain drop, add $9. 11.80 per
foot, spark and corrosion resistant models, add $13.40 16.20 per foot
for aluminum hand chain.
180.00
221.00
374.00
515.00
702.00
825.00
1,052.00
2,832.00
3,099.00
2.333.00
801.00
911.00
1,129.00
1,172.00
For Air Motor Driven Trolleys – see page 24.
CM HOIST PRODUCTS HFLU-1108 11/24/08 23
ALL PRICES ARE IN U.S. FUNDS.

CM AIR HOISTS & ACCESSORIES
CM Air Motor-Driven Trolleys
Traverse Std. Approx.
Product Capacity Speed flange shipping User
code
Standard
(tons) FPM width (in.) wgt. (lbs.) price
7411A ;, - & 1 50 3-5 95 $ 3,156.00
7412A 2 60 3?-6 105 3,218.00
7413A 3 60 4-6; 150 3,794.00
Spark Resistant Trolleys
7414A >, -, & < 50 3-5 95 $ 3,983.00
7415A 1 60 3?-6 105 4,047.00
7416A 2 60 4-6; 150 4,622.00
Equipped with 7-foot pendant control hose.
Always specify the Product Code Number that will operate with the
trolley. Models for Patented Track with narrow flat tread steel wheels are
available. Models with extended Beam Flange Adjustment are available.
When ordering, advise Product Code of hoist and capacity.
For longer than 7-foot control add $6.60 9.21/ft.
For Hoist and MDT pendant hose add $6.610 15.19/ft.
Maximum pendant control drop is 36 ft.
CM AIRSTAR HOISTS ACCESSORIES
Air Hose Assembly
Assembly requires Catalog No. for both hose and fittings.
Product ID OD Max. User
code (in.) (in.) Braid PSI Wt./Ft. price/foot
901610 - x 1 200 0.33 $ 2.77
901611 < 1; 2 225 0.52 3.21
901612 1 1- 2 200 0.65 4.98
Fittings
Male Swivel at each end.
Product Hose ID Thread Size User
code (in.) M-NPT price/pair
901614 - > $ 36.00
901615 < -
38.00
901616 1 <
60.00
Fittings with Quick Disconnect
Quick Disconnect on One End – Standard Male Swivel on
Opposite End.
901618 - > $ 57.00
901619 < -
77.00
901620 1 <
132.00
Recoil Air Hose
Self-Storing Air Hose with Fittings
Hose Working
Product size x length User
code (ID In.) (ft.) Fittings each end price
901621 - x 15 > NPTF Male $ 106.00
901622 - x 25 Swivel Fittings 132.00
901624
901625
901626
<
<
<
x
x
x
15
25
50
< NPTF Male
Swivel Fittings
212.00
263.00
423.00
Nylon coated cable with eyebolt fittings each end for supporting
recoil air hose (supports by others).
Product User
code Length (ft.) price
901629 25 $ 57.00
901630 50
93.00
Redundant Support
Hoist suspension redundant support for CM AirStar
Product code User price
402268 $ 77.00
Pendant Throttle Conversion Kit
Kit for converting the pull cord CM AirStar air hoist to
pendant throttle operation.
Product code User price
402269 $ 807.00
For longer than 6' pendant hose, add $4.15 6.00
per foot.
Adapter For Hook Susp on AirMDT
Hoist suspension redundant support for CM AirStar
Product code User price
32901001 $ 327.42
Air Hose Trolleys
These trolleys are used to support air hose and are installed on the
same track as a hoist. 2?"–6" flange.
Product code For hose size
User
price
40254 >" – 1" Hose $ 30.00
Wire Rope Festoon Systems
For air supply hose -" to 1" ID hose.
Working Loop Overall Approx.
Product travel depth length shipping User
code (ft.) (ft.) (ft.) wgt. (lbs.) price
901601
901602
901603
Filter-Lubricator Units
Air hoists must have a supply of clean, lubricated air for their
operation. A filter and lubricator must be installed in the air supply
line, as close as practical to the hoist. The recommended operating
air pressure for all capacities of CM air hoists is 90 psi. When air line
pressure exceeds 115 psig, it is required that a pressure regulator
be provided in the supply line to maintain proper pressure.
Filter-Lubricator Units
Product Inlet/outlet Bowl
Approx.
shipping User
code For: size (in.) size wgt. (lbs.) price
902960 AirStar > 11 oz. 6 $ 191.00
902961 AirStar - 11 oz. 7 228.00
902962 AirStar 6 < 24 oz. 11 423.00
902963 AirStar 6 1 24 oz. 15 423.00
Filter-Regulator-Lubricator Units
902966 AirStar > 11 oz. 14 $ 281.00
902967 AirStar - 11 oz. 15 344.00
902968 AirStar 6 < 24 oz. 20 582.00
902969 AirStar 6 1 24 oz. 20 582.00
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
24
16 3 18.5
21 4 23.5
28 3 31.1
37 4 40.1
40 3 43.6
52 4 55.6
11 $ 281.00
13
15
415.00
570.00

CM AIR HOISTS ACCESSORIES
Chain Containers for Air Hoists
Chain containers are recommended wherever the tail chain should
be kept up out of the way to prevent fouling the load or the hazard
of looped chain. Chain feeds into and out of container without
kinking or twisting.
Chain
Container
for
CM AirStar
Standard Chain Container for CM AirStar Air Hoist
Maximum lift (ft.)
Approx.
Product Chain ;, >, - < User
code Suspension (S Dim.) Ton Ton price
44455121 Hook or Lug 22- 60 30 $
44455126 Lug 28- 75 37
44455131 Lug 33- 90 45
44455135 Lug 37- 105 52
Spark Resistant – Longer Lift Chain Containers for AirStar 6
Product Depth User
code (S dim.) - Ton 1 Ton 2 Ton price
439425*1 15 60 30 20 $
439425*2 19 90 45 30
439425*3 23 120 60 40
439425*4 27 150 75 50
439425*5 31 180 90 60
439425*6 35 210 105 70
* - ton insert number 1
1 ton insert number 2
2 ton insert number 3
Link chain hoists using these long lift containers must be lug
suspended, cross mounted.
Chain containers are supported from the trolley suspension pins.
Chain containers are low headroom design, 101⁄2 579.00
602.00
632.00
657.00
Maximum lift
717.00
743.00
767.00
784.00
809.00
840.00
inches wide.
25
Standard Chain Container for CM AirStar 6 Air Hoists
Product
Maximum lift (ft.)
Approx.
shipping User
code 1 ton 2 ton 3 ton wgt. (lbs.) price
905434 15 do not use do not use 4 $ 104.00
905435 30 15 10 8 107.00
905436 45 22 15 10 167.00
905437 60 30 20 14 182.00
905438 75 37 25 15 293.00
905439 90 45 30 16 329.00
Spark Resistant Chain Container for CM AirStar 6 Air Hoist
Maximum lift (ft.) Approx.
Product shipping User
code 1/2 ton 1 ton 2 ton wgt. (lbs.) price
905444 15 do not use do not use 4 $ 364.00
905445 30 15 10 8 381.00
905446 45 22 15 10 463.00
905447 60 30 20 14 549.00
905448 75 37 25 15 600.00
905449 90 45 30 16 633.00
Cloth Chain Container for CM AirStar 6 Air Hoist
805435 30 30 15 2 $ 127.00
805436 45 45 22 2 167.00
805437 60 60 30 2 217.00
CM AirStar/AirStar 6 Accessories
User
price
Supplemental External Muffler
(in addition to std. internal muffler)
Airstar Hoist.....................................................................$ 163.00
Airstar 6 Hoist.................................................................... 421.00
Air Motor Driven Trolley ..................................................... 421.00
Deduct Two Lever Pendant Throttle Control
(pendant by others)
Airstar Hoist ...................................................................( -183.00 137.00)
Airstar 6 Hoist ................................................................( -183.00 140.00)
Air Motor Driven Trolley..................................................( -186.00 140.00)
Add Six Lever Pendant to Trolley & Hoist ............................ 1,527.00
Add Four Lever Pendant to Trolley without Hoist ................ 641.00
Six Lever Pendant Packed Loose
(no pendant hose or fittings) (item number 648885600).. 1,972.15
Zinc Plated Hooks, add per Hook
Airstar Hoist.......................................................................
Airstar 6 Hoist....................................................................
Drop Stops (Safety Lugs – steel only) for
Air Motor Driven Trolleys ....................................................
Drop Stops with Rubber Bumpers for
Air Motor Driven Trolleys ....................................................
Patented Track Wheels Air Motor Driven Trolleys,
31 ⁄4" minimum flange width
Standard Trolley add: ........................................................ 352.00
Spark Resistant Trolley add:.............................................. 736.00
Food Grade Lubrication Hoists
Airstar Hoist....................................................................... N/C
Airstar 6 Hoist.................................................................... 108.00
Epoxy Enamel Paint, three coat system
Each Hoist, Trolley & Chain Container
combination add: .............................................................. 583.00
Rigid Top Hook
Airstar Hoist....................................................................... 37.00
Airstar 6 Hoist (1 & 2 Ton) .................................................. 25.00
Airstar 6 Hoist (3 Ton) ........................................................ 123.00
Relabeling of Airstar Hoist capacity ...................................... 137.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.
58.00
41.00
279.00
560.00

CM AIR HOISTS ACCESSORIES
AirStar Fabric Chain Containers
Product Chain
Approx.
shipping Depth
Hoist Capacities (Maximum Lift)
User
code type wgt. (lbs.) (S Dim.) 1/4 - 1/2 ton 1 ton price
931850 Link 3 10 20 10 $ 280.00
931855 Link 3 15 40 20
297.00
AirStar 6 Fabric Chain Containers
Product Chain
Approx.
shipping Depth
Hoist Capacities (Maximum Lift)
User
code type wgt. (lbs.) (S Dim.) 1/4 - 1/2 ton 1 ton 2 ton 3 ton price
931851 Link 3 10 20 20 10 N/A $ 202.00
931852 Link 3 13 30 30 15 10 218.00
931853 Link 3 15 40 40 20 13 240.00
931854 Link 3 18 50 50 25 16 276.00
931856 Link 3 20 60 60 30 20 309.00
AirStar 6 Polyethylene Chain Containers
Product
Chain
container
Maximum Lift in ft.
User
code depth (in.) 1 ton 2 ton 3 ton price
922440 10 18 9 6 $ 84.00
922441 12 28 14 9
84.00
922442 15 40 20 13
136.00
922443 20 50 25 16
153.00
ShopAir Chain Container
Product
Bucket
length
Approx.
shipping
Maximum length of lift in feet
User
code (in.) wgt. (lbs.) Single reeve Double reeve price
2063 3? 4 10 5 $ 46.00
2064 5; 5 20 10
52.00
2065 10 5 40 20
61.00
2066 13 5 80 40
66.00
2067 26 6 120 60
113.00
ShopAir Bulk Load Chain
Capacity Feet of chain Chain Approx. shipping Drum user
(lbs.) Description in package drum code wgt. (lbs.) price
250 85018 66 $ 2,511.00
250, 300,
500 & 600
.157 Bar
Diameter
500 85019 126
5,021.00
1,000 85020 244
10,043.00
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
26

CM AIR XL HOIST AND ACCESSORIES
Lodestar Air XL Hoist
Hook Plain
Geared Motor Driven
Capacity Speed Product User Wgt. User Wgt. User Wgt. User Wgt.
(tons) Reeving (fpm) code† price (lbs.) price (lbs.) price (lbs.) price (lbs.)
2 1 31 5340 $ 8,259.00 347 $ 8,728.00 407 $ 9,052.00 452 $ 12,024.00 505
3 2 21 5341 8,596.00 421 9,248.00 476 9,694.00 491 13,042.00 569
5 2 13 5342 8,683.00 421 9,530.00 576 10,120.00 586 13,763.00 611
6 3 10 5343 9,482.00 453 10,330.00 608 10,919.00 618 14,564.00 643
7: 3 9 5344 N/A N/A 10,987.00 608 11,593.00 618 15,348.00 643
All units shown contain 10 ft. lift.
† Add suffix to product code:
H for Hook Suspension, P for Plain Trolley, G for Geared Trolley or M for Motor Driven Trolley, (hook suspension not available on 71 ⁄2 ton capacity).
Additional lift over 10 ft. – per foot add:
Description
Price
2 Ton – 1 Part Reeving $ 22.25
3, 5 Ton – 2 Part Reeving
44.50
6, 7: Ton – 3 Part Reeving
66.75
Lodestar Air XL Hoist Options
Description
Price
Additional two thumb lever $ 333.05
Filter & Lubricator
396.25
Filter Regulator – Lubricator
Pendant Drop
582.00
Hoist Only – per foot adder $ 8.30
Hoist with AMDT – per foot adder
For pendant drops over 72 feet, consult factory.
13.80
Hoist Spark Resistant Package††
Description
Price
2 Ton $ 1,007.80
3, 5 Ton
1,352.65
6, 7: Ton
1,632.25
††Copper plated hooks & lower blocks, stainless steel hook
latch, plated load chain.
Lodestar Air XL Hoist Chain Containers
Maximum length of lift in feet
Bucket 1 part 2 part 3 part
Product Length Net 2 3, 4, 5 5, 6, 7:
Code (In.) Wt. Ton Ton Ton Price
5241 10 12 30 15 10 $ 423.00
5281 15 16 54 27 18 438.00
5242 20 20 80 40 26 452.00
5282 25 23 108 54 36 465.00
5243 30 26 135 67 45 478.00
Additional lift over 10 ft.
Plated Chain – per foot add:
2 Ton – 1 Part Reeving $ 23.10
3, 5 Ton – 2 Part Reeving
46.20
6, 7: Ton – 3 Part Reeving
69.30
Trolley Spark Resistant Package††
Description
Price
2 Ton $ 720.75
3, 5, 6, 7: Ton
818.25
††Bronze Trolley Wheels
Trolley Options
Flange adustment – 35 /8" thru 61 /4"2 Ton $
Over 6> thru 8? $ 99.15
Over 8< thru 11
142.10
X For 2 ton Motor Driven Trolley, use the 3-7: ton adders.
CM HOIST PRODUCTS HFLU-1108 11/24/08 27
ALL PRICES ARE IN U.S. FUNDS.

CM ELECTRIC WIRE ROPE HOIST PRODUCTS
CM Polaris wire rope hoist
Max. Hoist lifting Std. Trolley Flange Approx.
Product capacity Hoist speed* lift Trolley speed width shipping User
code (tons) H.P. (FPM) (ft.) H.P. (FPM) Suspension (in.) wgt. (lbs.) price
6000L 1 2 18 25 ; 75 Lug 3 – 5 190 $ 3,680.00
6000P Plain trolley 213 4,118.00
6000G †Geared trolley 230 4,641.00
6000M Mtr. driven trolley 266 5,715.00
6004L 2 2 14 20 ; 60 Lug 3> – 6 220
6004P Plain trolley 263
6004G †Geared trolley 280
6004M Mtr. Driv. trolley 385
6008L 3 4 16 30 : 50 Lug 4 – 6; 335
6008P Plain trolley 475
6008G †Geared trolley 525
6008M Mtr. driven trolley 560
6016L 5 4 10 20 : 50 Lug 4 – 6; 355
6016P Plain trolley 495
6016G †Geared trolley 580
6016M Mtr. driven trolley 545
CM Apollo wire rope hoist
All voltages 230/460. Must specify exact voltage requirement.
* Apply for additional hoist & MDT speeds.
Push button suspended 3 ft. 6 in. less than lift.
†Trolley hand chain 2 ft. 6 in. less than lift.
Freight terms – F.O.B. Muskegon, MI
Made in
U.S.A.
Special Charges
Order change – $50.00 67.00 minimum
Drawings – $125.00 166.00 certified for approval.
Service manuals – standard soft cover & packed w/hoist,
$9.00 22.00 each additional
Non-standard manuals in 3 ring binder $ 53.00
3,588.00
4,005.00
4,501.00
5,531.00
6,216.00
6,655.00
7,178.00
8,288.00
6,225.00
6,636.00
7,132.00
8,146.00
Max. Hoist lifting Std. Trolley Flange Approx.
Product capacity Hoist speed* lift Trolley speed width shipping User
code (tons) H.P. (FPM) (ft.) H.P. (FPM) Suspension (in.) wgt. (lbs.) price
6020L 5 5 15 26 : 50 Lug 4 – 6; 860 $ 8,604.00
6020P Plain trolley 1,000 9,709.00
6020G †Geared trolley 1,085 10,093.00
6020M Mtr. driven trolley 1,050 10,656.00
6028L 7.5 7.5 14 22 : 50 Lug 4 – 6; 910
6028P Plain trolley 1,050
6028G †Geared trolley 1,135
6028M Mtr. Driv. trolley 1,100
6032L 10 10 14 25 2(;) 50 Lug 4 – 6; 1,325
6032P Plain trolley 1,690
6032G †Geared trolley 1,750
6032M Mtr. driven trolley 1,785
CSA Modifications Extra
11,636.00
12,745.00
13,127.00
14,335.00
13,351.00
15,561.00
15,943.00
18,179.00
ALL PRICES ARE IN U.S. FUNDS. 28
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM ERGONOMIC MATERIAL HANDLING PRODUCTS
CM Max pneumatic balancer
Adapter brackets
Product code For use on mfgr. User price
0981 CM 609 $
0923 CM LodeRail
0983 Gorbel/Spanco
0984 KBK
CM Max low headroom trolley
Product code Capacity (lbs.) Approx. shipping wgt. (lbs.) User price
0980 500 24 $ 253.00
Prices apply to standard flange adjustments.
Apply for prices on other than standard.
Made in
U.S.A.
Working Approx.
Product Capacity Type of range *Reach shipping wgt. (lbs.) User
code (lbs.) control (inches) (inches) w/control price
0950 120 Pendant 80 144 60 $
0953 120 Balance 80 144 60
0951 200 Pendant 80 144 68
0954 200 Balance 80 144 68
0952 300 Pendant 80 144 84
0955 300 Balance 80 144 84
0943 500 Pendant 80 144 98
0947 120 Dual balance 80 144 60
0948 200 Dual balance 80 144 68
0949 300 Dual balance 80 144 86
0944 120 Pendant 130 144 60
0945 200 Pendant 130 144 68
0946 300 Pendant 130 144 86
3,141.00
3,141.00
3,514.00
3,514.00
3,881.00
3,881.00
5,084.00
3,888.00
4,262.00
4,628.00
3,665.00
4,262.00
4,860.00
* Working range: Vertical lift from the hook in the lowest position to the hook in the highest position.
** Reach: Vertical distance from the bottom of the balancer to the hook in the lowest position. Acutal reach may be adjusted at installation
and under no circumstances should it be less than 84 inches.
*** Weights listed are for units with pendant controls and do not include the Low Headroom Trolley or suspension plate. For units with balance
control, reduce the listed weights by 4 lbs. Standard control hose drop is 108"
Air wire rope manipulator
123.78
112.00
113.00
123.78
Hook Suspension
Product Capacity User
code Description (lbs.) price
0957 Single Hook 120 & 200 $
0958 Double Hook 300 & 500
1086 Latchlok Hook
0968 Double Reeve Kit
225.00
363.00
202.00
313.00
Rated Standard Lifting Air Top hook Shipping Approx.
product Model capacity lift speed consump. A shipping User
code number (lbs.) (ft.) (FPM) (CFM) Dim. wgt. (lbs.) price
17050W TMM-140 300 6.5 36 21.2 22 < 20 $ 2,140.00
NOTE: Air inlet size is >" NPT.
IMPORTED
CM Hoist test stand
Made in
U.S.A.
Product Approx. shipping User
code Description wt. (lbs.) price
1200 Hydraulic Test Stand – Manually Operated 496 $ 9,318.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 29
ALL PRICES ARE IN U.S. FUNDS.

CM CRANE COMPONENTS & ACCESSORIES
CM Crane Bridge Kits
These crane bridge kits contain all parts needed to build
underhung and top running single girder crane bridges,
except for the cross shaft (when required), bridge beam
and trolley stop angles.
For complete specifications, see Catalog.
Push Type Underhung
Angle Construction Trucks
Kit Rwy beam Maximum Maximum Approx.
product flange capacity span shipping User
code adj. range (tons) (ft.) Description wgt. (lbs.) price
905360 3" – 8" - 30 Pressed Steel Wheels 300 $
905360 3" – 8" 1 24 Pressed Steel Wheels 300
905360SR 3" – 8" 1 24 Spark Resistant Wheels 300
905361 3>" – 8" 2 30 Pressed Steel Wheels 310
905362 3>" – 8" 2 30 Forged Steel Wheels 320
905362PT 3;" 2 30 Patented Track Wheels 320
905362SR 3>" – 8" 2 30 Spark Resistant Wheels 320
Channel Construction Trucks
Kit Rwy beam Maximum Maximum Approx.
product flange capacity span shipping User
code adj. range (tons) (ft.) Description wgt. (lbs.) price
905368 3>" – 5-" 3 36 Forged Steel Wheels 380 $
905368W1 5-" – 8" 3 36 Forged Steel Wheels 390
905368W2 8" – 10-" 3 36 Forged Steel Wheels 400
905368SR 3>" – 5-" 3 36 Spark Resistant Wheels 380
905368PT 3;" 3 36 Patented Track Wheels 380
905368S 3>" – 5-" 3 24 3’ - 0” Short Wheelbase 330
905524 4" – 6;" 5 36 Forged Steel Wheels 550
905524W1 6>" – 9" 5 36 Forged Steel Wheels 560
905524W2 9" – 11-" 5 36 Forged Steel Wheels 570
905524PT 3;" 5 36 Patented Track Wheels 550
905524SR 4" – 6;" 5 36 Spark Resistant Wheels 550
905524S 4" – 6;" 5 24 3’ - 0” Short Wheelbase 495
Push Type Top Running
Kit Maximum Maximum Approx.
product capacity span shipping User
code (tons) (ft.) Description wgt. (lbs.) price
904535 5 36 8” Ductile Iron Wheels 450 $
904535SR 5 36 8” Spark Resistant Wheels 450
8” Ductile Iron Wheels
904535S 5 24
405
3’-0” Short Wheel Base
For complete specifications, see Catalog.
End connection kit sold separately, cat no 51525050 $ 166.00 list.
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
30
2,346.00
7,397.00
3,042.00
815.00
815.00
1,899.00
907.00
1,387.00
1,755.00
3,102.00
1,755.00
1,929.00
2,003.00
3,437.00
2,148.00
2,449.00
2,918.00
3,118.00
3,208.00
3,467.00
4,709.00
3,613.00

CM CRANE COMPONENTS & ACCESSORIES
Hand Geared Underhung For Runway Flange Widths of 3 3/8 - 5 1/2” for 3 max tons*
For Runway Flange Widths of 4 - 6 1/4” for 5 max tons**
Cross shaft support Cross shaft coupling
Max. Max. Kit Approx. End Truck
capacity span product shipping User product Product Product
(tons) (ft.) code wgt. (lbs.) price code Qty. code Qty. code
Standard
3
5
Spark Resistant
15 B03/15UHG 440 $ 2,869.00
1 2
22 B03/22UHG 442 2,967.00 905369* 2 2
29 B03/29UHG 446 3,116.00 4’ - 6” WB 3 3
36
15
B03/36UHG
B05/15UHG
448
520
3,215.00
3,985.00
4
1
905373
3
2
905374
22 B05/22UHG 522 4,082.00 905525** 2 2
29 B05/29UHG 526 4,233.00 4’ - 6” WB 3 3
36 B05/36UHG 528 4,329.00
4 3
15 B03/15UHGSR 480 $ 4,750.00
1 2
22 B03/22UHGSR 482 4,845.00 905369SR 2 2
3 29 B03/29UHGSR 486 4,998.00 4’ - 6” WB 3 3
36
15
B03/36UHGSR
B05/15UHGSR
488
570
5,096.00
5,982.00
4
1
905373
3
2
905374
22 B05/22UHGSR 572 6,077.00 905525SR 2 2
5 29 B05/29UHGSR 576 6,230.00 4’ - 6” WB 3 3
36 B05/36UHGSR 578 6,326.00
4 3
Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks – (1 pair) Components Detailed in Application Guide
36’ Hand Chain Cross Shaft Bearing as noted above * For flange widths of 5-1/2” - 8” add $ 261.00
1 Hand Chain Link Cross Shaft Coupling as noted above * For flange widths of 8”-10 1/2” add $ 336.30
* For patent track add $ 400.80
** For flange widths of 6 3/8” - 9” add $ 278.45
** For flange widths of 9”-11 1/2” add $ 372.40
** For patent track add $ 558.00
17' Drop Standard – 8282 $ 156.00
36’ Hand Chain Cross Shaft Bearing as noted above
1 Hand Chain Link Cross Shaft Coupling as noted above
* Standard kit hand chain is zinc plated, 36’ long. Additional hand chain per lineal ft. add $ 4.60.
Spark resistant kit hand chain
aluminum, 36’ ft. long. Additional spark resistant hand chain per lineal ft. add $ 10.1.
Hand Geared Top-Running
31
Kit consists of:
Cross shaft support Cross shaft coupling
Max. Max. Kit Approx. End Truck
capacity span product shipping User product Product Product
(tons) (ft.) code wgt. (lbs.) price code Qty. code Qty. code
Standard
15 B05/15TH 500 $ 3,459.00
1 2
5
22
29
B05/22TH
B05/29TH
515
532
3,554.00
3,707.00
904536
4’ - 6” WB
2
3
904540
2
3
Spark Resistant
36 B05/36TH 549 3,804.00
4 3
5
15 B05/15THSR 550 $ 9,770.00
1 2
22
29
B05/22THSR
B05/29THSR
565
582
9,865.00
10,016.00
904536SR
4’ - 6” WB
2
3
904540
2
3
36 B05/36THSR 599 10,112.00
4 3
Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks – (1 pair)
36’ Hand Chain Cross Shaft Bearing as noted above
1 Hand Chain Link Cross Shaft Coupling as noted above
Kit consists of:
905374
* Standard kit hand chain is zinc plated, 36’ long. Additional hand chain per lineal ft. add $ 4.60.
Spark resistant kit hand chain
aluminum, 36’ ft. long. Additional spark resistant hand chain per lineal ft. add $ 10.10 .
905374
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM CRANE COMPONENTS & ACCESSORIES
Motor Driven with Single Drive Underhung - For Runway Flange Width of 3-3/8” - 5-1/2”*
Kit consists of:
Max.
capacity
Max.
span Speed
Kit
product
Approx. shipping
wgt. (lbs.) User price End Truck
product
Cross
shaft
Cross
shaft Drive
(tons) (ft.) (fpm) code 1 Speed 2 Speed 1 Speed 2 Speed code support coupling (hp)
Standard
1/4
thru
3
8
15
22
29
36
55 B03/08UC*55
70 B03/08UC*70 524 544 $ 4,286.00 $ 4,755.00
0
110 B03/08UC*110
55 B03/15UC*55
70 B03/15UC*70 524 544 4,381.00 4,852.00
1
110 B03/15UC*110
55 B03/22UC*55
905369
70 B03/22UC*70 564 584 4,477.00 4,947.00 4’-6” WB 2
110 B03/22UC*110
55 B03/29UC*55
70 B03/29UC*70 586 606 4,626.00 5,099.00
3
110 B03/29UC*110
55 B03/36UC*55
70 B03/36UC*70 606 626 4,724.00 5,195.00
4
110 B03/36UC*110
*Specify: 1= Single Speed Kit Consists of: 2 End Trucks (1 pair) 1 Reducer
2=Two Speed 1 Motor 1 Control Panel (NEMA 1)
1 Disconnect (NEMA1) Cross Shaft Support as noted above
Cross Shaft Coupling as noted above
Specify Voltage when ordering – Add $212.00 299.20 to kit price for single phase only.
Components Detailed in Application Guide
** For flange widths of 5-1/2” - 8” add........$ 261.00
** For flange widths of 8” - 10-1/2” add .....$ 336.30
** For patented track add ...........................$ 400.80
Motor Driven with Single Drive Underhung - For Runway Flange Widths of 4” - 6 1/4” *
Kit consists of:
Max.
capacity
Max.
span Speed
Kit
product
Approx. shipping
wgt. (lbs.) User price End Truck
product
Cross
shaft
Cross
shaft Drive
(tons) (ft.) (fpm) code 1 Speed 2 Speed 1 Speed 2 Speed code support coupling (hp)
Standard
5
8
15
22
29
36
50 B05/08UC*50
65 B05/08UC*65 524 544 $ 5,328.00 $ 5,798.00
0
100 B05/08UC*100
50 B05/15UC*50
65 B05/15UC*65 544 564 5,422.00 5,894.00
1
100 B05/15UC*100
50 B05/22UC*50
905525
65 B05/22UC*65 564 584 5,520.00 5,990.00 4’-6” WB 2
100 B05/22UC*100
50 B05/29UC*50
65 B05/29UC*65 586 606 5,672.00 6,141.00
3
100 B05/29UC*100
50 B05/36UC*50
65 B05/36UC*65 606 626 5,767.00 6,237.00
4
100 B05/36UC*100
*Specify: 1= Single Speed Kit Consists of: 2 End Trucks (1 pair) 1 Reducer
2=Two Speed 1 Motor 1 Control Panel (NEMA 1)
1 Disconnect (NEMA1) Cross Shaft Support as noted above
Cross Shaft Coupling as noted above
Specify Voltage when ordering
Components Detailed in Application Guide – Add $212.00 299.20
to kit price for single phase only
** For flange widths of 6 3/8” - 9” add........$ 278.45
** For flange widths of 9” - 11-1/2” add......$ 372.40
** For patented track add ...........................$ 558.00
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
32
2
3
2
3
1/2
1/2

CM CRANE COMPONENTS & ACCESSORIES
Motor Driven with Dual Drive Underhung - 36' Span Kit – For Runway Flange Width of 3-3/8" – 5-1/2" **
48' Span Kit – For Runway Flange Width of 4" – 6-1/4" †
Max.
capacity
Max.
span Speed
Kit
product
Approx. shipping
wgt. (lbs.)
User price
End Truck
product Drive
(tons) (ft.) (fpm) code 1 Speed 2 Speed 1 Speed 2 Speed code (hp)
1/4
thru
3
36
55
70
B03/36UD*55
B03/36UD*70 545 565 $ 5,170.00 $ 5,873.00
905369
4'-6" WB
100 B03/36UD*110
55 Not Available
48 70
100
B03/48UD*70
B03/48UD*110
645 665 6,686.00 7,392.00 905380
6'-0" WB
*Specify: 1= Single Speed Kit Consists of: 2 End Trucks (1 pair) 2 Reducers
2=Two Speed 2 Motors 1 Control Panel (NEMA 1)
1 Disconnect (NEMA 1)
Specify Voltage when ordering – Single Phase not available
Components Detailed in Application Guide
** For flange widths of 5-1/2" – 8" add.....$ 261.00
** For flange widths of 8" – 10-1/2" add..... 336.30
** For patented track add ........................... 400.80
** For flange widths of 6-3/8" – 9" add....... 278.45
** For flange widths of 9" – 11-1/2" add..... 372.40
Motor Driven with Dual Drive Underhung with 4'-6" WB - For Runway Flange Width of 4" - 6-1/4" **
Specify Voltage when ordering – Single Phase not available
Components Detailed in Application Guide
** For flange widths of 6-3/8" – 9" add.....$ 278.45
** For flange widths of 9" – 11-1/2" add...$ 372.40
** For patented track add .........................$ 558.00
Control Panel Options
1 Speed 2 Speed
To Eliminate panel and Disconnect Deduct
$( -922.75 676.00 ) $( -1,141.15 837.00 )
To Upgrade to NEMA 4 - Add: $ 671.60
33
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.
(2) 1/2
(2) 1/2
Max.
capacity
Max.
span Speed
Kit
product
Approx. shipping
wgt. (lbs.)
User price
End Truck
product Drive
(tons) (ft.) (fpm) code 1 Speed 2 Speed 1 Speed 2 Speed code (hp)
55 B05/36UD*50
5 36 65 B05/36UD*65 665 685 $ 6,213.00 $ 6,917.00 905525 (2) 1/2
100 B05/36UD*100
*Specify: 1= Single Speed Kit Consists of: 2 End Trucks (1 pair) 2 Reducers
2=Two Speed 2 Motors 1 Control Panel (NEMA 1)
1 Disconnect (NEMA 1)

CM CRANE COMPONENTS & ACCESSORIES
Motor Driven with Single Drive - Top Running
Kit consists of:
Max.
capacity
Max.
span Speed
Kit
product
Approx. shipping
wgt. (lbs.) User price End Truck
product
Cross
shaft
Cross
shaft Drive
(tons) (ft.) (fpm) code 1 Speed 2 Speed 1 Speed 2 Speed code support coupling (hp)
Standard
1
thru
5
8
15
22
29
36
50 B05/08TC*50
70 B05/08TC*70 529 554 $ 4,799.00 $ 5,267.00
0 0
100 B05/08TC*100
50 B05/15TC*50
70 B05/15TC*70 544 569 4,894.00 5,363.00
1 2
100 B05/15TC*100
50 B05/22TC*50
904536
70 B05/22TC*70 559 584 4,990.00 5,459.00 4'-6" WB 2
100 B05/22TC*100
50 B05/29TC*50
70 B05/29TC*70 576 601 5,141.00 5,613.00
3
100
50
B05/29TC*100
B05/36TC*50
3
70 B05/36TC*70 591 616 5,238.00 5,709.00
4
100 B05/36TC*100
*Specify: 1= Single Speed Kit Consists of: 2 End Trucks (1 Pair) 1 Reducer
2=Two Speed 1 Motor 1 Control Panel (NEMA 1)
1 Disconnect (NEMA1) Cross Shaft support as noted above
Cross Shaft Coupling as noted above
End connection kit sold separately 51525050 $ 166.00 List
Specify Voltage when ordering – Add $ 299.20 to kit price for single phase only.
Components Detailed in Application Guide
Wheels are designed to be run on ASCE rail only, square bar applications are available upon request.
Square bar requiements; width 40mm (1-1/2"), height 40mm minimum (1-1/2" minimum).
Motor Driven with Dual Drive Top Running
Max.
capacity
Max.
span Speed
Kit
product
Approx. shipping
wgt. (lbs.)
User price
End Truck
product Drive
(tons) (ft.) (fpm) code 1 Speed 2 Speed 1 Speed 2 Speed code (hp)
1
thru
5
End connection kit sold separately 51525050 $ 166.00 List
Specify Voltage when ordering – Single phase not available.
Components Detailed in Application Guide
Wheelbase exceeding 54" – line shaft drive applicable on 36' span and below only.
Control Panel Options
36
50
70
B05/36TD*50
B05/36TD*70 575 615 $ 5,682.00 $ 6,388.00
904536
4'-6" WB
100 B05/36TD*100
50 Not Available
48 70
100
B05/48TD*70
B05/48TD*100
675 715 6,309.00 7,017.00
904549
6'-0" WB
*Specify: 1= Single Speed Kit Consists of: 2 End Trucks (1 pair) 2 Reducers
2=Two Speed 2 Motors 1 Control Panel (NEMA 1)
1 Disconnect (NEMA 1)
To Eliminate panel and Disconnect Deduct
To Upgrade to NEMA 4 - Add: $ 671.60
1 Speed 2 Speed
$( -922.75 676.00 ) $( 837.00 -1,141.15)
ALL PRICES ARE IN U.S. FUNDS. CM HOIST PRODUCTS HFLU-1108 11/24/08
34
(2) 1/2
(2) 3/4
1/2

CM CRANE COMPONENTS & ACCESSORIES
Underhung
Electrical and Control Options
Description
User
price
Warning Horn $ 669.40
NEMA 4 Travel Limit Switch (Trip Dogs by Others) 1,046.10 $
Electronic Acceleration Control (EAC) – 115 volt control
Approx.
Product shipping User
code Description
SIngle Speed
wgt. (lbs.) price
904596 .75 HP Max 208 - 230 - 3 - 60
2 HP Max 460 - 3 - 60
Two Speed
10 $ 336.00
904598 .75 HP Max 208 - 230 - 3 - 60
2 HP Max 460 - 3 - 60
10 446.00
913186
SIngle Speed or Two Speed
2 HP Max 208 - 230 - 3 - 60
10 668.00
Bridge Brakes – for 4'-6" Wheel Base
Product
Approx.
shipping User
code Description wgt. (lbs.) price
904554 3 ft. lb. Adjustable Brake 120/240 - 1 - 60 15 $ 446.00
904555 3 ft. lb. Adjustable Brake 230/460 - 3 - 60 15 446.00
904556 3 ft. lb. Adjustable Brake 575 - 3 - 60 15 446.00
Motor Protection
Product
Approx.
shipping User
code Description wgt. (lbs.) price
TAS Temperature Actuated Switch in Motor Winding — Std.
TOL Thermal overload relays (3 phase) in enclosure 25 $ 198.75
Bridge Bumpers
Product
Approx.
shipping User
code Description wgt. (lbs.) price
932000 Rubber Bumpers – Underhung 20 $ 77.00
Air Motor Drive Package
Product
Approx.
shipping User
code Description
Includes air motor, gear reducer, control head with pendant
throttle and hose assembly with 8 ft. hose drop. Traverse
wgt. (lbs.) price
51526501 speed approx. 70 fpm. Requires catalog 902967 filter-regulatorlubricator
mounted near air motor. For additional pendant
hose over 8' - 0" add per foot......$ 9.30
115 $ 3,160.00
35
CM HOIST PRODUCTS HFLU-1108 11/24/08 ALL PRICES ARE IN U.S. FUNDS.

CM CRANE COMPONENTS & ACCESSORIES
Top Running
Electrical and Control Options
User
Description price
Warning Horn $ 669.40
NEMA 4 Travel Limit Switch (Trip Dogs by Others) 1,046.10 $
Electronic Acceleration Control (EAC) – 115 volt control
Approx.
Product shipping User
code Description
SIngle Speed
wgt. (lbs.) price
904596 .75 HP Max 208 - 230 - 3 - 60
2 HP Max 460 - 3 - 60
Two Speed
10 $ 336.00
904598 .75 HP Max 208 - 230 - 3 - 60
2 HP Max 460 - 3 - 60
10 446.00
913186
SIngle Speed or Two Speed
2 HP Max 208 - 230 - 3 - 60
10 668.00
Ballast Resistors
Product
Approx.
shipping User
code Description wgt. (lbs.) price
905391 SS and 2S 208 - 230 - 3 - 60
905392 SS and 2S 460 - 3 - 60 10 $ 294.00
905393 SS and 2S 575 - 3 - 60
Bridge Brakes – for 4'- 6" Wheel Base
Product
Approx.
shipping User
code Description wgt. (lbs.) price
904554 3 ft. lb. Adjustable Brake 120/240 - 1 - 60 15 $
904555 3 ft. lb. Adjustable Brake 230/460 - 3 - 60 15
904556 3 ft. lb. Adjustable Brake 575 - 3 - 60 15
446.00
446.00
446.00
Motor Protection
Product
Approx.
shipping User
code Description wgt. (lbs.) price
TAS Temperature Actuated Switch in Motor Winding — Std.
TOL Thermal overload relays (3 phase) in enclosure 25 $ 198.75
Bridge Bumpers
Product
Approx.
shipping User
code Description wgt. (lbs.) price
932000 Rubber Bumpers – Top Running 20 $ 77.00
Air Motor Drive Package
Product
Approx.
shipping User
code Description
Includes air motor, gear reducer, control head with pendant
throttle and hose assembly with 8 ft. hose drop. Traverse
wgt. (lbs.) price
51526501 speed approx. 70 fpm. Requires catalog 902967 filter-regulatorlubricator
mounted near air motor. For additional pendant
hose over 8' - 0" Add per foot.......$ 9.30
115 $ 3,221.00
ALL PRICES ARE IN U.S. FUNDS. 36
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM TRACTOR & ACCESSORIES
Tractor & Accessories ★
Single unit for Monorail Hoists
Capacities to 5 Tons
Product User
Capacity Speed code price
35 TD-235 $ 2,162.00
2,000
55 TD-255
2,162.00
70 TD-270
2,162.00
105 TD-2105 2,162.00
35 TD-335
2,162.00
3,000 55 TD-355
2,162.00
70 TD-370
2,162.00
105 TD-3105 2,162.00
35 TD-535
2,162.00
5,000 55 TD-555
2,162.00
70 TD-570
2,162.00
6,000
35 TD-635
2,162.00
55 TD-655
2,162.00
10,000 35 TD-1035 2,162.00
Standard unit is adjustable for standard I-beams and flat flange
beams from 3.38" to 8" wide.
Maximum allowable flange thickness is .62". Minimum curve for
standard units is 36" minimum radius.
Standard Pricing Includes Transformer, Control Fuse, 2-Button
Pushbutton Station, 10 ft. Drop Cable and Strain Relief Chain.
NOTE: Specify Required Voltage, Phase, Frequency and Beam
Size when ordering.
Prices are for three phase only,
for single phase see Options & Accessories.
NOT CSA APPROVED
Tractor Options & Accessories
User
Description price
Motor Brake $ 575.00
24V Controls (inlieu of standard 115V)
151.00
Mainline Contactor (does not include button)
298.00
Motor Fuses, Holder, Enclosure
325.00
Soft-start with Enclosure
492.00
4-Button Push Assembly
372.00
6-Button Push Assembly
541.00
8-Button Push Assembly
651.00
Extra Pushbutton cable (includes strain relief) per ft. 4.50
Delete 2-button pendant station, deduct ( -66.00 53.00 )
Delete single speed controls, deduct ( -194.00 159.00 )
Twin unit for Underhung Bridges*
4,057.00
NEMA 4 Panel
272.00
Single Phase
326.00
2 Speed Adder (not on 35 FPM)
743.00
Patented Track (straight track only)
103.00
12" Tow Bar
91.00
For options or accessories not listed, consult factory for pricing
and availability.
*When ordering, add “T” in front of single unit catalog number.
Example: TTD-235
★★★ Prices are FOB Lisbon, Ohio.
CM HOIST PRODUCTS HFLU-1108 11/24/08 37
ALL PRICES ARE IN U.S. FUNDS.

CM ELECTRIFICATION – CONDUCTOR BAR
Medium-Duty “V” Bar Electrification System
Each system includes all components needed to satisfy given length and amperage draw for
your specific application.
For systems requiring higher amperage, greater number of conductors, and/or longer run, contact
Columbus McKinnon. Bolted splices, < inch spacing between conductors, 15 feet sections.
Note: Conductor bar lengths can be field cut to length with hand saw.
Standard CM Conductor Bar Kits (For straight runs only)
Custom Engineered Systems Available.
Mounting staffs on new applications are required for all new applications.
Selection Chart
Crimped Splices
3 Conductor, 100 amp (maximum) system
System Conductor Joint Power End Collector Anchor Support Bracket 3-pole
Product length bar cover feed covers 100 amp. clamp bracket clip hanger User
code (ft.) 310101-J 310850 310910 310892 310990 310832 310982 51142 310861 price
C1000 15 6 0 3 6 3 3 4 8 3 $
C1001 30 9 3 3 6 3 3 7 14 6
C1002 45 12 6 3 6 3 3 10 20 9
C1003 60 15 9 3 6 3 3 13 26 12
C1004 75 18 12 3 6 3 3 16 32 15
C1005 90 21 15 3 6 3 3 19 38 18
C1006 105 24 18 3 6 3 3 23 46 22
C1007 120 27 21 3 6 3 3 26 52 25
C1008 135 30 24 3 6 3 3 29 58 28
C1009 150 33 27 3 6 3 3 32 64 31
4 Conductor, 100 amp (maximum) system
System Conductor Joint Power End Collector Anchor Support Bracket 3-pole
Product length bar cover feed covers 100 amp. clamp bracket clip hanger User
code (ft.) 310101-J 310850 310910 310892 310990 310832 310982 51142 310861 price
C1010 15 8 0 4 8 4 4 4 8 3 $
C1011 30 12 4 4 8 4 4 7 14 6
C1012 45 16 8 4 8 4 4 10 20 9
C1013 60 20 12 4 8 4 4 13 26 12
C1014 75 24 16 4 8 4 4 16 32 15
C1015 90 28 20 4 8 4 4 19 38 18
C1016 105 32 24 4 8 4 4 23 46 22
C1017 120 36 28 4 8 4 4 26 52 25
C1018 135 40 32 4 8 4 4 29 58 28
C1019 150 44 36 4 8 4 4 32 64 31
* For monorail systems only one “V” bar kit is needed.
* One “V” bar kit is needed for each bridge.
* For multiple hoists additional collectors are required (P/N 31589) List $34.05 56.05 ea.
* Connector tool included with each kit.
* Optional mounting staff (P/N 31402) List $135.20 222.40
ea.
481.95
703.55
925.30
1,146.80
1,368.60
1,590.10
1,811.60
2,033.25
2,254.95
2,476.10
595.00
842.75
1,090.55
1,338.25
1,586.05
1,833.70
2,081.50
2,329.30
2,576.90
2,824.70
ALL PRICES ARE IN U.S. FUNDS. 38
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM ELECTRIFICATION – CONDUCTOR BAR
Heavy-Duty 8-Bar Electrification System
8-Bar is the most safe, economical solution for electrifying cranes and monorails.
For systems requiring higher amperage, greater number of conductors, and/or longer run,
contact Columbus McKinnon. 3 inch spacing between conductors, 10 foot sections.
Note: Conductor bar lengths can be field cut to length with hand saw.
Standard CM Conductor Bar Kits (For straight runs only)
Custom Engineered Systems Available.
Mounting staffs on new applications are required for all new applications.
Selection Chart
3 Conductor, 110 amp (maximum) system
System Conductor Power End Collector Anchor Hanger Support
Product length bar feed cover 30 amp. clamp clamp bracket User
code (ft.) 11000 11091 11088 13128 21833 31400 31418 price
C1020 50 15 3 6 3 3 27 10 $
C1021 60 18 3 6 3 3 33 12
C1022 70 21 3 6 3 3 39 14
C1023 80 24 3 6 3 3 45 16
C1024 90 27 3 6 3 3 51 18
C1025 100 30 3 6 3 3 57 20
C1026 110 33 3 6 3 3 63 22
C1027 120 36 3 6 3 3 69 24
C1028 130 39 3 6 3 3 75 26
C1029 140 42 3 6 3 3 81 28
C1030 150 45 3 6 3 3 87 30
4 Conductor, 110 amp (maximum) system
CM HOIST PRODUCTS HFLU-1108 11/24/08 39
ALL PRICES ARE IN U.S. FUNDS.
955.55
1,071.95
1,188.55
1,304.95
1,421.45
1,537.95
1,654.50
1,771.00
1,888.25
2,004.10
2,120.35
System Conductor Power End Collector Anchor Hanger Support
Product length bar feed cover 30 amp. clamp clamp bracket User
code (ft.) 11000 11091 11088 13128 21833 31400 31418 price
C1031 50 20 4 8 4 4 36 10 $ 1,228.30
C1032 60 24 4 8 4 4 44 12 1,374.50
C1033 70 28 4 8 4 4 52 14 1,521.35
C1034 80 32 4 8 4 4 60 16 1,667.05
C1035 90 36 4 8 4 4 68 18 1,813.10
C1036 100 40 4 8 4 4 76 20 1,959.25
C1037 110 44 4 8 4 4 84 22 2,105.55
C1038 120 48 4 8 4 4 92 24 2,251.65
C1039 130 52 4 8 4 4 100 26 2,397.95
C1040 140 56 4 8 4 4 108 28 2,544.10
C1041 150 60 4 8 4 4 116 30 2,690.30
* For monorail systems only one 8-Bar kit is needed.
* One 8-Bar kit is needed for each bridge.
* For multiple hoists additional collectors are required (P/N 13128) List $55.15 90.70 ea.
* Connector tool included with each kit.
* Optional mounting staff (P/N 31402) List $135.20 222.40
ea.

CM ELECTRIFICATION – CONDUCTOR BAR
Carrier End
Splice
Hanger
Tow
**Min. length
of cable
required
Product System Channel Lead Cable Clamp Stop joint Channel Anchor bar (in feet) User
code length 22209 22168 21991 21957 23381 21954 28510 28509 28505 ordered separately price
C1042 10 1 1 1 1 1 0 2 1 1 22 $
C1043 20 2 1 3 1 1 1 4 1 1 33
C1044 30 3 1 4 1 1 2 6 1 1 44
C1045 40 4 1 6 1 1 3 8 1 1 56
C1046 50 5 1 8 1 1 4 10 1 1 68
C1047 60 6 1 9 1 1 5 12 1 1 79
C1048 70 7 1 11 1 1 6 14 1 1 91
C1049 80 8 1 13 1 1 7 16 1 1 102
C1050 90 9 1 14 1 1 8 18 1 1 114
C1051 100 10 1 16 1 1 9 20 1 1 125
C1052 110 11 1 18 1 1 10 22 1 1 137
C1053 120 12 1 20 1 1 11 24 1 1 148
C1054 130 13 1 22 1 1 12 26 1 1 160
C1055 140 14 1 24 1 1 13 28 1 1 171
C1056 150 15 1 26 1 1 14 30 1 1 183
C1057 160 16 1 28 1 1 15 32 1 1 194
C1058 170 17 1 30 1 1 16 34 1 1 206
C1059 180 18 1 32 1 1 17 36 1 1 217
C1060 190 19 1 34 1 1 18 38 1 1 229
C1061 200 20 1 36 1 1 19 40 1 1 240
**For longer systems, contact Columbus McKinnon.
**NOTE: Includes 10 foot additional cable to allow for 5 foot on both ends.
28506 with control box........... $
28507 without control box .....
555.45
78.35
Industrial-Duty Box Track Festoon
The following kits are based on a 3 foot loop depth.
All kits include: hangers, splices, one tow bar, one lead carrier, cable carriers,
one end stop, one end clamp. (Select flat cable and bushing boxes.)
Contact Columbus McKinnon for other options.
Cable Not Included.
ALL PRICES ARE IN U.S. FUNDS. 40
CM HOIST PRODUCTS HFLU-1108 11/24/08
158.80
253.10
323.60
417.55
511.40
582.30
676.10
769.95
840.75
932.20
1,028.70
1,122.50
1,216.30
1,310.30
1,404.25
1,498.25
1,591.90
1,661.20
1,779.90
1,873.80

CM ELECTRIFICATION
Heavy-Duty Cable Reels
Cable Reel Selection Chart
Product AWG/ AMP Dim User
code Length cond. rating code price
3582 30' 16/3 10 A $
3583 50' 16/3 10 A
3584 30' 16/4 8 A
3585 50' 16/4 8 A
3586 30' 14/3 15 A
3587 50' 14/3 15 A
3589 30' 14/4 12 A
3590 50' 14/4 12 A
3591 30' 12/3 20 A
3592 50' 12/3 20 A
3593 30' 12/4 16 A
3594 50' 12/4 16 B
3595 30' 10/3 25 A
3597 30' 10/4 20 A
727.60
761.10
801.55
849.20
757.60
808.65
838.55
909.05
796.30
873.85
866.85
1,416.35
833.25
916.05
PVC Jacket – Round Cable
Nominal diameters and weights shown may vary. Other cable types
and sizes are available – contact Columbus McKinnon.
Selection Chart
Round Cable
Product Number Weight Nominal Amp User
code AWG conductors per foot O.D. rating price
89682 16 SO 16/3 .102 .430 10.0 $ 6.00
89683 SO 16/4 .135 .485 8.0 5.55
89615 SO 16/8 .221 .645 7.0 8.10
89627 SO 16/12 .305 .740 7.0 14.75
89674 14 SO 14/3 .169 .560 15.0 5.55
89677 SO 14/4 .209 .605 12.0 5.55
89685 SO 14/12 .481 .930 10.5 18.85
89670 12 SO 12/3 .230 .640 20.0 5.55
89667 SO 12/4 .270 .670 16.0 6.05
89686 SO 12/6 .372 .800 16.0 10.40
89688 SO 12/8 .472 .915 14.0 13.55
89530 SO 10/4 .350 .750 20.0 6.55
Heavy-Duty Cable Reels
Product User
PVC Jacket – Flat Cable
code Description price
3599 345° Pivot Base $ 121.55
Product AWG/ Weight Overall size AMP User
3579 360° Swivel Base 1,358.20
code cond. per foot inches rating price
80172 16/12 .27 .23 x 1.70 15 $ 7.35
Selection Chart
80171
80174
16/8
14/12
.18
.34
.23 x 1.15
.24 x 1.87
15
17
6.05
9.15
Wire Rope Festoon
80150 14/8 .22 .24 x 1.29 17 8.35
The following kits are based on a 3 foot loop depth.
All kits include: Catenary wire, trolleys, cable clips, anchor
brackets, hardware kit, and tow bar. – Cable Not Included
80173
80151
80176
14/4
12/8
12/4
.12
.32
.16
.24 x .69
.23 x 1.34
.26 x .80
17
30
30
6.05
8.35
6.05
Flat Cable Wire Rope Festoon Systems
*Min. length
80177 10/4 .24 .29 x .88
*For other cable sizes, contact CM.
40 6.50
Product
Wire
length
Flat cable
width
of cable
required User Round Cable Wire Rope Festoon Systems
code
3571
3572
(max)
20'
40'
(max)
1

CM ELECTRIFICATION ACCESSORIES
Bushing Boxes Flat Cable
Product
code Description User price
26112 Cable bushing box $ 112.20
26113 Cable bushing box
169.40
31404 Cable bushing box
283.65
Selection Chart Connectors Round Cable – Type SO
Cable
product Nominal Product User Product User Product User
Type/AWG/# Con.* = Stock Cable code Lbs./Ft. O.D. Amp code price code price code price
16 SO 16/3* 89682 .102 .430 10.0 89916 $ 25.75 83980 $ 19.35 — —
SO 16/4* 89683 .135 .485 8.0 89916 25.75 $ 83980 19.35 — —
SO 16/8* 89615 .221 .645 7.0 — — 89767 16.40 83982 $ 18.05
SO 16/12* 89627 .305 .740 7.0 — — 89767 16.40 83982 18.05
14 SO 14/3* 89674 .169 .560 15.0 89926 24.05 983979 16.45 — —
SO 14/4* 89677 .209 .605 12.0 89926 24.05 $ 983979 16.45 — —
SO 14/8* 89684 .373 .845 10.5 — — — — 83978
SO 14/12 89685 .481 .930 10.5 — — — — 83981
12 SO 12/3* 89670 .230 .640 20.0 — — 89767 16.40 83982
SO 12/4* 89667 .270 .670 16.0 — — 89767 16.40 83982
SO 12/6* 89686 .372 .800 16.0 — — — — 83978
SO 12/8* 89688 .472 .915 14.0 — — — — 83981
10 SO 10/3* 89680 .283 .690 25.0 — — 89767 16.40 83982
SO 10/4* 89530 .350 .750 20.0 — — 89767 16.40 83978
Ampacities are based on 149°F insulation all conductors power carrying. Data is for engineering information only. CM cannot specifically
recommend ampacities, since the exact application may need approval from local authorities.
*For extensive cable runs, contact Columbus McKinnon.
CM RADIO REMOTE CONTROL SYSTEM
Pricing Available Upon Request
VARIABLE FREQUENCY DRIVES
Pricing Available Upon Request
Connector
-z N.P.T.
Connector

CM MANUALS, DIAGRAMS
One manual included at no charge with each unit.
Apply the following extra charges for additional manuals/diagrams.
Prodcut User
Maintenance Manuals code price
AirStar Hoist.......................................................................................................................... 11720901 $ 15.00
AirStar 6 Hoist ....................................................................................................................... 11720902 15.00
Apollo Hoist .......................................................................................................................... 060194
15.00
Cyclone Hand Hoist (all models) ........................................................................................... 83885
15.00
Hurricane Hand Hoist............................................................................................................ 56812
15.00
Lodestar Hoist & low Headroom Trolley................................................................................ 83874
15.00
Lodestar XL Electric Hoist..................................................................................................... 52756
15.00
Lodestar XL Air Hoist ............................................................................................................ 53031
15.00
Max Pneunatic Balancer ....................................................................................................... 09890
17.20
Motor Driven Trolleys for Apollo/ Polaris............................................................................... 060394
15.00
Plain/Geard Trolleys for Apollo/Polaris.................................................................................. 060494
15.00
Polaris Hoist.......................................................................................................................... 060294
15.00
Powerstar Electric Hoist........................................................................................................ 83892
15.00
Puller Lever Tool ................................................................................................................... 83871
15.00
RailStar Motor Driven Trolley................................................................................................. 03704
15.00
Rigger.................................................................................................................................... 23952
15.00
Series 602 Mini Ratchet Lever Tool ...................................................................................... 02805
2.00
Series 622 Hand Hoist .......................................................................................................... 22950
15.00
Series 630 Trolley .................................................................................................................. 30756
Series 632 Trolley .................................................................................................................. 32755
Series 633 Trolley .................................................................................................................. 33725
Series 635 Motor Driven Trolley for Lodestar Hoist .............................................................. 83875
Series 637 Lever Tool............................................................................................................ 37700C
Series 653 Lever Hoist .......................................................................................................... 37700C
ShopAir ................................................................................................................................. 20944
Valustar Electric Hoist ........................................................................................................... 24761
Shopstar................................................................................................................................ 20800
Short Handle Puller ............................................................................................................... 73764
Diagrams User Price
RECOMMENDED SPARE PARTS LIST (all models)............................................................... $ 5.00
CLEARANCE DIAGRAMS – (all models)
Up to 3 prints.................................................................................................................................................... N/C
Each additional print ........................................................................................................................................
Velumn Reproducables ....................................................................................................................................
Mylars ...............................................................................................................................................................
WIRING DIAGRAMS
Up to 3 prints.................................................................................................................................................... N/C
Each additional print ........................................................................................................................................
Velumn Reproducables ....................................................................................................................................
Mylars ...............................................................................................................................................................
CERTIFICATION OF LOAD TEST
1 certificate (hoist) *one included at no charge with each unit .........................................................................
1 certificate (trolley)...........................................................................................................................................
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
Each additional certificate ................................................................................................................................
100.00
N/C
Approval drawing.............................................................................................................................................. 100.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 43
ALL PRICES ARE IN U.S. FUNDS.
10.00
30.00
80.00
10.00
30.00
80.00
10.00

CM HOIST RINGS
Heavy Duty – Forged
Rated Bolt Net
Product load length Thread weight User
code (lbs.) (in.) size (in.) (lbs.) price
433112 500 .56 1/4-20 .50 $ 67.46
433212 800 .56 5/16-18 .52
433214 800 1.06 5/16-18 .54
433312 1,000 .56 3/8-16 .56
433314 1,000 1.06 3/8-16 .58
433515 2,500 1.00 1/2-13 1.72
433516 2,500 1.25 1/2-13 1.89
433614 4,000 1.00 5/8-11 1.78
433615 4,000 1.25 5/8-11 1.89
433714 5,000 1.00 3/4-10 1.89
433716 5,000 1.50 3/4-10 2.02
433102 7,000 1.20 3/4-10 7.23
433103 7,000 1.45 3/4-10 7.25
433101 8,000 1.20 7/8-9 7.33
433105 10,000 1.45 1-8 7.57
433106 10,000 1.20 1-8 7.63
433107 10,000 2.20 1-8 7.81
433401 15,000 2.63 11/4-7 16.00
433420 20,000 2.63 13/8-6 17.20
433424 24,000 2.63 11/2-6 18.10
433427 30,000 2.96 2-41/2 22.90
433432 30,000 2.96 2-8 22.90
!
WARNING
Improper installation and use of hoist rings can cause injury.
To avoid injury:
• Do not exceed rated load.
• Install rings per instructions.
Verify full 360° seating—Retorque periodically.
• Consult angular lifting diagram when lifting at other than 90°.
Effect of Hoist Ring Angle on Load
ALL PRICES ARE IN U.S. FUNDS. 44
CM HOIST PRODUCTS HFLU-1108 11/24/08
67.46
67.46
67.46
67.46
81.73
81.73
81.73
81.73
84.93
84.93
184.84
184.84
184.84
191.79
191.79
191.79
285.44
305.48
328.81
553.83
553.83

CM HOIST RINGS
Specialty Engineered – Machined
Rated Bolt Net
Product load length Thread weight User
code (lbs.) (in.) size (in.) (lbs.) price
423050 550 .54 1/4-20 .30 $ 104.06
423051 800 .29 5/16-18 .31
423052 800 .54 5/16-18 .31
423053 1,000 .54 3/8-16 .31
423301 2,500 1.07 1/2-13 1.00
423004 2,500 .78 1/2-13 2.31
423322 2,500 .78 1/2-13 2.75
423005 2,500 1.03 1/2-13 2.31
423323 2,500 1.03 1/2-13 2.00
423006 2,500 1.28 1/2-13 2.31
423324 2,500 1.28 1/2-13 2.75
423001 4,000 .78 5/8-11 2.44
423002 4,000 1.03 5/8-11 2.44
423320 4,000 1.03 5/8-11 2.88
423003 4,000 1.28 5/8-11 2.44
423321 4,000 1.28 5/8-11 2.88
423007 5,000 1.03 3/4-10 2.56
423325 5,000 1.03 3/4-10 3.00
423009 5,000 1.53 3/4-10 2.56
423327 5,000 1.53 3/4-10 3.00
423102 7,000 1.04 3/4-10 6.23
423329 7,000 1.04 3/4-10 7.25
423103 7,000 1.54 3/4-10 6.63
423330 7,000 1.54 3/4-10 6.63
423101 8,000 1.04 7/8-9 6.75
423328 8,000 1.04 7/8-9 6.75
423105 10,000 1.29 1-8 7.00
423331 10,000 1.29 1-8 7.00
423106 10,000 1.54 1-8 7.00
423332 10,000 1.54 1-8 7.00
423107 10,000 2.29 1-8 7.00
423333 10,000 2.29 1-8 7.00
423401 15,000 1.89 11/4-7 14.00
423202 24,000 2.70 11/2-6 33.75
423200 30,000 2.96 2-41/2 36.00
423501 50,000 4.00 21/8-8 87.50
423503 50,000 4.00 21/4-4 87.50
423600 75,000 5.20 3-4 166.00
423701 100,000 7.00 31/2-4 240.00
104.06
104.06
104.06
126.57
126.03
148.77
126.03
148.77
126.03
148.77
128.04
128.04
148.77
128.04
148.77
128.04
148.77
128.04
148.77
277.76
303.67
277.76
303.67
277.76
303.67
287.01
303.67
287.01
303.67
287.01
303.67
432.74
565.51
666.10
1,850.74
1,850.74
3,093.11
16,014.88
CM HOIST PRODUCTS HFLU-1108 11/24/08 45
ALL PRICES ARE IN U.S. FUNDS.

CM HEAVY DUTY METRIC HOIST RINGS
HEAVY DUTY METRIC HOIST RINGS
• Forged Alloy Steel With Minimum Tensile Strength
of 180,000 psi.
• Corrosion Resistant Plating.
• 100% Magnetic Particle Inspected.
• Pivot 180°, Swivel 360°.
USEFUL CONVERSION DATA (Approximation)
To Convert From
To Multiply By
Length Millimeter (mm) Inch (in) 0.03937
Force Pound (Ib) 224.81
Stress Pound/Inch2 Kilonewton (kN)
Megapascal (Mpa)
(psi) 145.04
Torque Newton-Meter (N-m) Inch-Pound (in-Ib) 8.85
Weight Kilogram (Kg) Pound (Ib) 2.204
A
RADIUS
Product
Rated
load
Dimensions (mm)
TL*
Approx.
shipping User
code (Kg) A B C D E F G K M N-m wgt. (Kg) price
434212 400 16.5 58.2 24.4 11.1 16 82.0 M8x1.25 31.8 38.5 9.5 .24 $ 81.01
434214 400 16.5 58.2 24.4 11.1 21 82.0 M8x1.25 31.8 38.5 9.5 .25 81.01
434312 450 16.5 58.2 24.4 11.1 16 82.0 M10x1.5 31.8 36.5 16.0 .25 81.01
434314 450 16.5 58.2 24.4 11.1 26 82.0 M10x1.5 31.8 36.5 16.0 .26 81.01
434515 1,050 25.4 88.9 38.1 19.1 25 134.9 M12x1.75 48.0 65.0 37.0 .78 102.73
434516 1,050 25.4 88.9 38.1 19.1 32 134.9 M12x1.75 48.0 65.0 37.0 .83 102.73
434614 1,900 25.4 88.9 38.1 19.1 25 134.9 M16x2.0 48.0 62.0 80.0 .81 103.71
434615 1,900 25.4 88.9 38.1 19.1 32 134.9 M16x2.0 48.0 62.0 80.0 .85 103.71
434714 2,200 25.4 88.9 38.1 19.1 25 134.9 M20x2.5 48.0 58.7 135.0 .86 109.74
434716 2,200 25.4 88.9 38.1 19.1 38 134.9 M20x2.5 48.0 58.7 135.0 .92 109.74
434101 3,000 35.6 129.5 52.1 25.4 28 177.8 M20x2.5 71.4 81.0 135.0 3.14 217.75
434102 4,200 35.6 129.5 52.1 25.4 28 177.8 M24x3.0 71.4 76.3 311.0 3.29 219.48
434103 4,200 35.6 129.5 52.1 25.4 38 177.8 M24x3.0 71.4 76.3 311.0 3.30 219.48
434105 4,500 35.6 129.5 52.1 25.4 38 177.8 M30x3.5 71.4 70-3 311.0 3.44 227.61
434107 4,500 35.6 129.5 52.1 25.4 48 177.8 M30x3.5 71.4 70.3 311.0 3.55 227.61
434401 7,000 50.8 171.5 72.9 31.8 67 234.2 M30x3.5 73.2 95.0 637.2 7.26 374.08
434402 11,000 50.8 171.5 72.9 31.8 67 234.2 M36x4.0 73.2 88.6 1,085.5 8.21 436.87
434403 12,500 50.8 171.5 72.9 31.8 80 234.2 M42x4.5 73.2 88.6 1,085.5 10.14 503.59
434404 13,500 50.8 171.5 72.9 31.8 80 234.2 M48x5.0 73.2 88.6 1,085.5 10.59 609.33
*Recommended Torque Load
* ! WARNING
ALL PRICES ARE IN U.S. FUNDS. 46
CM HOIST PRODUCTS HFLU-1108 11/24/08
M
F
B
BUSHING
FLANGE
G THREAD K
Improper installation and use of hoist rings can cause injury.
TO AVOID INJURY:
• Do not exceed rated load.
• Install rings per instructions. Verify full 360° seating—
Retorque periodically.
• Consult angular lifting graph when lifting at other that 90°
C
E
D

CM 180° PIVOTING HOIST RINGS
180° PIVOTING HOIST RINGS
*To obtain maximum load capacity, high strength screws must be used.
• Forged Chrome Moly Steel
• Heat Treated
• Black Oxide Finish
• Pivot 180°
• High strength screws are 100% Magnaflux ® inspected.
• Rings and bodies are Magnafluxed per ASTM E 1444-94A
Product
Rated
load*
Installation
torque
Thread
size
Approx.
shipping User
code (lbs.) A B C D E F G H R (ft.-lbs.) (in.) wgt. (lbs.) price
434030 2,000 2 13⁄4 1 5⁄16 21⁄2 3⁄4 5⁄16 (2PLCS) 0 1⁄2 4-7 2 0.8 $
434035 2,500 21⁄2 21⁄4 11⁄8 3⁄8 33⁄16 7⁄8 3⁄8 (2PLCS) 0 5⁄8 7-10 21⁄2 1
434040 5,000 3 25⁄8 11⁄2 1⁄2 37⁄8 11⁄8 1⁄2 (2PLCS) 0 3⁄4 20-25 3 2
434045 12,000 4 31⁄8 15⁄8 3⁄4 51⁄4 13⁄8 1⁄2 (4PLCS) 11⁄4 7⁄8 20-25 4 3.7
434050 20,000 5 35⁄8 21⁄16 1 63⁄16 17⁄8 5⁄8 (4PLCS) 11⁄4 Dimensions (in.)
18.44
21.48
31.02
67.68
1 42-50 5 7.5 98.50
A
R
D
E
Replacement Screws
FOR “G” SOCKET
CAP SCREW R
Screw Screw
Product Used on thread length User Quantity
code hoist ring (in.) (in.) price required
423812 434030 5 ⁄16-18 11 ⁄4 $ .85 2
423813 434035 3 ⁄8-16 11 ⁄4 1.26 2
423804 434040 1 ⁄2-13 2 2.50 2
Magnaflux is a registered trademark of Illinois Tool Works, Inc.
B
F
C
CM HOIST PRODUCTS HFLU-1108 11/24/08 47
ALL PRICES ARE IN U.S. FUNDS.
A
D
FOR
“G” SOCKET-HEAD
CAP SCREW
E
H
C

CM LIFTING CLAMPS
Universal Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
CZ920.5 695232 1,100 0-5/8 3 $ 306.00
CZ921.5 695233 3,300 0-3/4 7
348.00
CZ922 695234 4,400 0-11/4 18
537.00
CZ923 695235 6,600 0-11/4 22
652.00
CZ924 695236 8,800 0-11/4 26.5 717.00
CZ924/L 694770 8,800 11/4-23/8 40
880.00
CZ926 694771 13,200 0-2 46.5 926.00
CZ926/L 694772 13,200 2-4 62 1,073.00
CZ928 694773 17,600 0-2 57.5 1,011.00
CZ928/L 694774 17,600 2-4 70.5 1,326.00
CZ9210 694775 22,000 0-2 66 1,393.00
CZ9210/L 694776 22,000 2-4 81.5 1,838.00
CZ9212 694777 26,400 0-2 119 1,665.00
CZ9212/L 694778 26,400 2-4 139 2,207.00
CZ9215 674779 33,000 0-2 165.5 2,420.00
CZ9215/L 694780 33,000 2-4 194 2,885.00
CZ9220 694781 44,000 0-21/2 271 3,931.00
CZ9220/L 694782 44,000 21/2-51/8 300 4,634.00
CZ9230 694783 66,000 0-21/2 430 5,382.00
CZ9230/L 694784 66,000 21/2-51/8 650.5 6,442.00
Hinged Universal Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
CY1 695237 2,200 0-3/4 10 $ 464.00
CY2 695238 4,400 0-11/4 28.5 644.00
CY3 695239 6,600 0-11/4 30
707.00
CX3 694791 6,600 0-11/4 26.5 1,000.00
CX6 694792 13,200 0-2 84 1,404.00
CX6/L 694793 13,200 2-4 106 1,877.00
CX8 694794 17,600 0-2 86 2,333.00
CX8/L 694795 17,600 2-4 112.5 2,558.00
CX10 694796 22,000 0-2 134.5 2,526.00
CX10/L 694797 22,000 2-4 167.5 3,229.00
!
WARNING
Improper use of lifting clamps may result
in loss of load and personal injury
To avoid injury:
• Do inspect clamps and equipment before use.
• Do not exceed working load limit of clamp.
• Use clamps only if authorized and properly trained.
• Do not move unbalanced load.
Items in bold are in stock and available for immediate delivery. Other items may require extended lead times.
ALL PRICES ARE IN U.S. FUNDS. 48
CM HOIST PRODUCTS HFLU-1108 11/24/08
CY
CX

CM LIFTING CLAMPS
LJ Gentle Grip Universal
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
LJ0.5 694800 1,100 3/8 7 $ 655.00
LJ1.5 694801 3,300 3/4 20 1,148.00
HG High Grip Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
HG0.5 694830 1,100 0-3/8 11 $ 821.00
HG1 694831 2,200 0-5/8 26.5
987.00
HG2 694832 4,400 0-3/4 48.5 1,373.00
HG3 694833 6,600 0-3/4 59.5 1,552.00
HG4 694834 8,800 0-3/4 70.5 2,032.00
TSS Gentle Grip Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TSS1.5 694839 3,300 1/4-1 20 $ 3,239.00
TSB Wide Jaw Gentle Grip Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TSB0.35 694841 770 0-21/2 17.5 $ 2,439.00
TSB0.75 694842 1,600 0-21/2 20
2,726.00
TSB1.25 694843 2,700 0-21/2 26.5 2,892.00
CM HOIST PRODUCTS HFLU-1108 11/24/08 49
ALL PRICES ARE IN U.S. FUNDS.

CM LIFTING CLAMPS
CT Heavy Duty T or Channel Section Clamps
Working Max.
New load flange Min. Approx.
product Model limit width web shipping User
code number (lbs.) (in.) (in.) wgt. (lbs.) price
CT0.75 694850 1,600 11/2 0 13 $ 607.00
CT1.5 694851 3,300 2 0 26.5 727.00
CT4 694853 8,800 21/2 1/8 92.5 1,182.00
CT8 694855 17,600 31/8 1/4 110.5 2,020.00
CG Heavy Duty Girder Clamps
Working
New load Approx.
product Model limit Flange shipping User
code number (lbs.) (in.) wgt. (lbs.) price
CG1 694870 2,200 0-5/8 11 $ 562.00
CG2 694871 4,400 0-11/4 31
734.00
CG4 694872 8,800 0-11/4 42
999.00
CG6 694873 13,200 1/2-2 81.5 1,290.00
TTR Girder Clamps
Working
New load Approx.
product Model limit Flange shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TTR1.5 694876 3,300 1/4-1 17.5 $ 882.00
TTR3 694877 6,600 1/4-1 28.5 1,214.00
Items in bold are in stock and available for immediate delivery. Other items may require extended lead times.
ALL PRICES ARE IN U.S. FUNDS. 50
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM LIFTING CLAMPS
GS Girder Stacking Clamps
Working
New load Beam Approx.
product Model limit depth Flange shipping User
code number (lbs.) (in.) (in.) wgt. (lbs.) price
GS0.5 694880 1,100 6-12 7/8 17.5 $ 834.00
GS1 694881 2,200 8-18 11/8 62 1,154.00
TTG Horizontal Girder Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TTG1.5 694885 3,300 0-11/8 11 $ 815.00
TTG3 694886 6,600 0-13/8 22 1,066.00
TTG4.5 694887 9,900 0-11/2 31 1,619.00
TTG7.5 694888 16,500 0-13/4 60 2,142.00
CH & HH Heavy Duty Horizontal* Plate Clamps
Working Approx.
New load shipping User
product Model limit/pair Plate wgt./pair price
code number (lbs.) (in.) (lbs.) per pair
CH1 695240 2,200 1/4-11/4 17.5 $ 354.00
CH2 695241 4,400 1/4-11/4 24.5 434.00
CH2/L 695242 4,400 3/4-2 26.5 570.00
CH4 694890 8,800 1/4-2 37.5 610.00
CH4/L 694891 8,800 2-4 51
687.00
CH6 694892 13,200 1/4-3 101.5 807.00
CH6/L 694893 13,200 2-5 123.5 935.00
CH8 694894 17,600 1/4-3 117
985.00
CH8/L 694895 17,600 2-5 132.5 1,140.00
HH8 694896 17,600 1/4-2 46.5 893.00
HH8/L 694897 17,600 2-4 62 1,007.00
CH10 694898 22,000 1/4-4 209.5 1,307.00
CH10/L 694899 22,000 2-6 238 1,515.00
*Clamps sold and used in pairs. Working load limit, weight, and price per pair.
!
WARNING
Improper use of lifting clamps may result
in loss of load and personal injury
To avoid injury:
• Do inspect clamps and equipment before use.
• Do not exceed working load limit of clamp.
• Use clamps only if authorized and properly trained.
• Do not move unbalanced load.
CM HOIST PRODUCTS HFLU-1108 11/24/08 51
ALL PRICES ARE IN U.S. FUNDS.

CM LIFTING CLAMPS
Roller Toe Horizontal Horizontal* Plate Clamps
Working
New load Approx. User
product Model limit Flange shipping price
code number (lbs.) (in.) wgt. (lbs.) per pair
RH30 694901 3,300 1/4-23/8 28.5 $ 550.00
RH50 694902 5,500 3/8-23/4 55
706.00
RH70 694903 7,700 3/8-31/8 79.5 868.00
RH100 694904 11,000 3/8-4 159 1,621.00
SH Sheet Bundle Horizontal* Clamps
Working
New load Approx. User
product Model limit Plate shipping price
code number (lbs.) (in.) wgt. (lbs.) per pair
SH2 694910 4,400 1/4-4 53 $ 777.00
SH3 694911 6,600 1/4-6 88 1,048.00
SH4 694912 8,800 1/4-77/8 181 1,255.00
THK Horizontal Thin Sheet* Clamps
Working Approx.
New load shipping User
product Model limit/pair Plate wgt./pair price
code number (lbs.) (in.) (lbs.) per pair
THK0.75 694930 1,600 0-1 6.5 $ 496.00
THK1.5 694931 3,300 0-13/8 13.5 551.00
THK4.5 694933 9,900 0-13/4 62
772.00
THK6.0 694934 13,200 0-23/8 62
847.00
THK9 694935 19,800 0-23/8 92.5 1,086.00
*Clamps sold and used in pairs, working load limit, weight, and price per pair.
Items in bold are in stock and available for immediate delivery. Other items may require extended lead times.
ALL PRICES ARE IN U.S. FUNDS. 52
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM LIFTING CLAMPS
HGC Hand Grip
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
HGC 694947 500 0-3/8 2.0 $ 192.00
TSG Screwcam Pulling Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TSG0.5 694325 1,100 0-3/4 9.0 $ 522.00
TSG1.5 694326 3,300 0-11/4 16.0
655.00
TSG3 694327 6,000 0-2 20.0 1,024.00
TSG5 694328 11,000 0-21/2 53.0 1,492.00
CR Rail Lifting Clamps
Working
New load Approx.
product Model limit shipping User
code number (lbs.) wgt. (lbs.) price
CR750 694951 2,200 28.5 $ 1,514.00
Multi-Rail Lifting Clamps
Working
New load Approx.
product Model limit No. shipping User
code number (lbs.) rails wgt. (lbs.) price
MR3 694960 11,000 3 185.5 $ 4,625.00
MR5 694962 11,000 5 291
6,897.00
!
WARNING
Improper use of lifting clamps may result
in loss of load and personal injury
To avoid injury:
• Do inspect clamps and equipment before use.
• Do not exceed working load limit of clamp.
• Use clamps only if authorized and properly trained.
• Do not move unbalanced load.
CM HOIST PRODUCTS HFLU-1108 11/24/08 53
ALL PRICES ARE IN U.S. FUNDS.

CM LIFTING CLAMPS
CP Pile Pitching Clamps
New
Working
load Slot Slot Pin Approx.
product Model limit depth width dia. shipping User
code number (lbs.) (in.) (in.) (in.) wgt. (lbs.) price
CP2 694980 4,400 9 3/4 3/4 42 $ 878.00
CP3 694981 6,600 9 1 11/8 51 1,008.00
CP5 694982 11,000 9 13/8 11/8 73 1,149.00
PP Pile Pulling Clamps
Working
New load Jaw Approx.
product Model limit opening shipping User
code number (lbs.) (in.) wgt. (lbs.) price
PP8 694983 17,600 0-11/8 62 $ 1,534.00
PP12 694984 26,400 0-11/8 114.5 1,950.00
Screwlok Beam Clamps**
Working
load Approx.
Product limit Flange shipping User
code (lbs.) (in.) wgt. (lbs.) price
09001W 2,000 3-9 8.4 $ 77.00
09002W 4,000 3-9 10.6
86.00
09003W 6,000 33/16-121/2 20.2
131.00
09004W 10,000 31/2-123/16 24.2
165.00
09005W
**Made in China
20,000 31/2-121/2 34.1
263.00
Screwlok Beam Clamps w/Shackle
Working
New load Approx.
product Model limit Flange shipping User
code number (lbs.) (in.) wgt. (lbs.) price
SC921 695249 2,200 3-81/4 11 $ 163.00
SC922 695250 4,400 3-81/4 13.5 184.00
SC923 695251 6,600 4-105/8 17.5 292.00
SC923/L 694991 6,600 3-12 20
366.00
SC925 694992 11,000 4-105/8 22
384.00
SC925/L 694993 11,000 3-12 26.5 480.00
SC9210 694994 22,000 3-12 35.5 570.00
!
WARNING
Improper use of lifting clamps may result
in loss of load and personal injury
To avoid injury:
• Do inspect clamps and equipment before use.
• Do not exceed working load limit of clamp.
• Use clamps only if authorized and properly trained.
• Do not move unbalanced load.
ALL PRICES ARE IN U.S. FUNDS. 54
CM HOIST PRODUCTS HFLU-1108 11/24/08

CM LIFTING CLAMPS
SC92T Twin Screwlok Clamps
Working
New load Approx.
product Model limit Flange shipping User
code number (lbs.) (in.) wgt. (lbs.) price
SC922T 694971 4,400 3-81/4 28.5 $ 552.00
SC923T 694972 6,600 4-105/8 35.5 752.00
SC923/LT 694973 6,600 3-12 44 1,053.00
SC925/T 694974 11,000 4-105/8 51 1,255.00
SC925/LT 694975 11,000 3-12 59.5 1,433.00
CTP Push Travel Screwlok Trolley
Working
New load Approx.
product Model limit Flange shipping User
code number (lbs.) (in.) wgt. (lbs.) price
CTP1 694986 2,200 3-81/4 13.5 $ 694.00
CTP2 694987 4,400 3-81/4 22
782.00
CTP3 694988 6,600 31/2-81/4 33 1,087.00
TBT Snap-On Trolley
Working
New load Approx.
product Model limit Flange shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TBT10 694996 660 23/8-31/8 15.5 $ 1,026.00
TBT20 694997 2,200 3-4 17.5 1,248.00
TBT40 694998 4,400 4-57/8 35.5 1,433.00
TBT60 694999 6,600 4-77/8 57.5 1,643.00
TH Wide Mouth Clamps
Working
New load Approx.
product Model limit Plate shipping User
code number (lbs.) (in.) wgt. (lbs.) price
TH0.35/100 694810 750 0-4 15.5 $ 1,416.00
TH0.35/200 694811 750 31/2-77/8 31
1,908.00
TH0.75/100 694812 1,600 0-4 18
1,554.00
TH0.75/200 694813 1,600 31/2-77/8 33
2,172.00
TH1.25/100 694814 2,700 0-4 26.5 1,722.00
TH1.25/200 694815 2,700 31/2-77/8 44
2,268.00
TH2.0/100 694816 4,400 0-4 37.5 2,103.00
TH2.0/200 694817 4,400 31/2-77/8 59.5 2,712.00
TH3.0/90 694818 6,600 0-31/2 48.5 2,733.00
TH5.0/90 694819 11,000 0-31/2 51
3,397.00
TH5.0/170 694820 11,000 31/8-65/8 88
3,919.00
TH10.0/100 694821 22,000 0-4 139
7,186.00
TH10.0/200 694822 22,000 31/2-77/8 154
8,842.00
Items in bold are in stock and available for immediate delivery. Other items may require extended lead times.
CM HOIST PRODUCTS HFLU-1108 11/24/08 55
ALL PRICES ARE IN U.S. FUNDS.

To avoid injury:
! WARNING
•Do not exceed working load limit (W.L.L.), rated load,
or capacity.
•All mechanical equipment must be installed, operated
and maintained properly.
•Installation, maintenance and operation must be
carried out as instructed in the information provided
with the equipment. Refer to CM Lifting, Pulling and
Binding Manual.
•Do not use any CM industrial product for lifting
people; special equipment is required for this purpose.
Refer to ASME/ANSI A-17 Series and applicable state
and local codes for specific requirements.
•Apply only as instructed. Refer to CM Manual or a
published rigging handbook.
•Use only alloy chain and attachments for overhead
lifting, not G30, G43, G70 or farm hardware.
Columbus McKinnon Hoist Products
Stock Number HFLU-1108 SS 4M 11/24/08 ©2008 Columbus McKinnon Corporation Printed in U.S.A.