Download Product Brochure - UWA Engineering Pte Ltd

Thermocouples
Plug or Jack Termination
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
U 2 - - 0 0 0
3. Sheath O.D. (inch)
D = 0.040 G = 0.188
E = 0.063 H = 0.250
F = 0.125
Note: PFA coating only available on E, F, G, H.
4. Connector Type
Standard Plugs and Jacks 400 o F (200 o C)
(0.313 inch maximum O.D.)
A = Standard plug
B = Standard jack
C = Standard plug with mating connector
Miniature Plugs and Jacks 400 o F (200 o C)
(0.125 inch maximum O.D.)
F = Miniature plug
G = Miniature jack
H = Miniature plug with mating connector
High Temperature Plugs and Jacks 1000 o F (540 o C)
(0.250 inch maximum O.D.)
L = High temperature plug
M = High temperature jack
N = High temperature plug with mating connector
5. Fittings, Weld Pads
0 = None
J = Non-Adjustable Compression Brass
L = NonAdjustable Compression SS
6. Sheath Material
4 = Alloy 600
5 = PFA coated over 304 SS
7 - 8. Sheath Length "L" (whole inches)
01 to 99
Lengths over 99 inches consult workshop
Maximum length for PFA coating is 48 inches.
9. Sheath Length "L" (fractional inch)
A = 0 C = 1/4 E = 1/2G = 3/4
B = 1/8 D = 3/8 F = 5/8H = 7/8
10. Junction
Grounded Ungrounded Exposed
Single U W A
Dual, common G S K
Dual, isolated - B D
11. Special Requirements
If none, enter "0". If required, consult workshop
12-14. Enter "000"
15. Calibration
Standard Limits
Special Limits
J K T E N
3 4 8 2 -