Leaflet air source heat pump compact design - Heliotherm ...

AIR SOURCE
HEAT PUMP
- COMPACT DESIGN
web control series
Heating capacity from 3 - 16 kW
Guaranteed comfort
Well-being can be so simple: The air-compact system’s closed refrigerant
cycle makes the heat pump installation even easier. This direct system
uses about 74% of the outdoor free energy and provides comfort all year
round. Also, by simply reversing the refrigeration cycle in the summer your
system can be used for cooling (optional).
Compact, easy and efficient
The air heat pump in compact design is economical, simple and easy to
install. Do to its closed refrigerant cycle, the heat pump can be installed in
any dry and frost safe room and be set ready to operate. The Heliotherm
web control ® enables cascade heating, swimming pool heating, integration
of a solar system or system remote maintenance and control.
Advantages of a Heliotherm heat pump
Long life and high reliability.
No special installation pre-approval permit required.
Active cooling possible.
International seal of approval for tested quality.
Maximum grants through certified high efficiency.
Highest efficiency and low operating costs due to Heliotherm’s
registered twin-x ® and patented dsi ® technology.
Less installation space required in heating room.
Remote maintenance via your expert partner using Heliotherm tele control ® .
Global remote control possibility via internet with Heliotherm’s web control ® .
Whisper quiet operation due to the special geometric
3 - times sound coupling proportion design reducing sound emission.
HELIOTHERM WÄRMEPUMPENTECHNIK GES.M.B.H.
Sportplatzweg 18 . 6336 Langkampfen . Austria . Phone +43 (0)5332 87496-0 . Fax +43 (0)5332 87496-30 . info@heliotherm.com . www.heliotherm.com

Performance Data –
AIR SOURCE HEAT PUMP - Compact DESIGN, WEB CONTROL SERIES
Heliotherm heat pump - type HP05L-K-WEB HP07L-K-WEB HP08L-K-WEB HP10L-K-WEB HP12L-K-WEB
Max. heat outlet temperature
A2W35 to
EN255 / ∆ 10 K
60 °C*
Heating capacity [kW] 6,3 7,1 8,6 9,8 12,1
COP 3,9 3,9 3,9 3,9 3,9
A2W35 to Heating capacity [kW] 5,9 6,6 8,1 9,2 11,4
EN14511/ ∆ 5 K COP 3,7 3,7 3,7 3,7 3,7
Dimensions in cm (H × W × D) 170 × 79× 69 170 × 79× 69 170 × 79× 69 170 × 79× 69 170 × 79× 69
Performance Data – MODULating AIR SOURCE HEAT PUMP
- Compact DESIGN, WEB CONTROL SERIES
Heliotherm
Heliotherm heat pump - type HP12L-K-M-WEB HP16L-K-M-WEB
modulating technology**
Max. heat outlet temperature
A2W35 to
EN255 / ∆ 10 K
A2W35 to
EN14511/ ∆ 5 K
60 °C*
Heating capacity [kW] 3,0 – 13,5 4,0 – 16,8
COP 4,2 - 4,5 4,2 - 4,5
Heating capacity [kW] 2,9 – 12,9 3,8 – 15,6
COP 4,0 - 4,3 4,0 - 4,3
Dimensions in cm (H × W × D) 170 × 79 × 69 170 × 79× 69
* Compressor specific
Smarter, more efficient and flexible.
- Up to 25% higher system efficiency and
lower CO 2
emissions than conventional heat pumps.
- Long life through soft starter function.
- More flexible system use. Unused rooms can
easily be excluded from heating.
** optional
Stepless modulation.
Adjusts to the building’s heating demand. Changing outside temperatures require an individual
smart heating system. Through the intelligent regulating control technology and the modulating
compressor, the system will only use as much power as need to produce the heat required. Thus, your
heating costs will be automatically optimized all year round.
Exemplary efficiency.
Heliotherm heat pumps have been awarded with the best possible classification by independent
testing institutes. Tested and approved heat pumps and granting Heliotherm with required energy
efficiency labels. In addition the Tyrolean heat pump manufacturer fulfills its leadership role in terms
of efficiency with the international seal of approval for tested quality and numerous patents. Lowest
operating costs with maximum environmental awareness you can count on.
European Quality Label
for Heat Pumps
check the validity of this label at www.ehpa.org/QL
Maximum use of subsidies.
High annual coefficient performance results allow for application to maximum state and federal
grants. Your Heliotherm expert partner can inform you about the individual grant development
opportunities in your area.
Heliotherm expert partners, your guarantee for excellence.
Our customers can rely on a specialist business that offers one-stop services! Certified heat pump
specialists that provide: consulting, planning, assembly installation and service! From the floor
heating to the heat pump system - from the regulating control to the refrigeration technology - from
planning through to the complete installation and service – top products and a competent partner
you can rely on!
Twin-x optimizes refrigerant
Additional free energy from the environment is
used for heating by means of Heliotherm’s registered
twin-x technology ® .
Electronic regulated working fluid
The Heliotherm patented DSI-technology ® automatically
adjusts to the changed operating conditions and therefore
considerably lowers operating costs.
Presented by your Heliotherm expert partner.
All rights reserved for technical changes, design change, errors in typesetting and printing. Date 01.07.2010.