GENERATION II ORGANICS FEL CONTAINER - Wastequip

GENERATION II ORGANICS FEL CONTAINER
The new, improved Generation II Organics FEL Container
features a heavy duty, reinforced lid and body for handling
heavy, wet organic waste.
Reinforced lid with
2 more lbs. of plastic
holds its shape and seals
tightly to the container
Mold on graphic identifies
container as extra heavy
duty front load container
Trap door provides safe, easy
access and additional cross
support ribs prevent the lid
from sagging
Manual lock bar eliminates
rubber straps and lock hasp
for a tighter fitting lid
Decreased surface
porosity of plastic
reduces mold buildup
Heavy duty, reinforced body
with an additional 30 lbs. of
plastic eliminates bulging
due to heavy loads
Steel rod reinforced rim
and steel frame base
prevent bowing
Benefits
Improves safety
• Durable, single-piece lid with trap door keeps out insects,
rodents and animals
• Trap door provides easy access
• Continuous lip on lid traps odors and prevents leakage
• Locking lid prevents unauthorized access
Durable
• Steel rod reinforced rim and base prevent bowing
• Plastic design means it withstands continued exposure to
aggressive organic waste without rusting or corroding like
steel containers
• Provides up to three times greater service life than steel
containers
Easy to use
• Easy to maneuver with casters
• Compatible with front end load forks for easy pickup and
dumping
Cost effective and environmentally responsible
• Fully nestable when unassembled
• Contains up to 50% recycled content
Tel: 800.424.0422 toter@toter.com
www.toter.com

GENERATION II ORGANICS FEL CONTAINER
Features
Standard:
• Plastic pockets with steel fork
pockets and steel runners
• Dark green color with black lid
and fork pockets
Available Options:
• Steel pockets with caster frame
• Manual steel lock bar
• Custom colors
• Custom labels
Specifications
3 cu. yd. FEL with
casters / plastic
pockets
3 cu. yd. FEL with
steel runners / steel
pockets
Load Rating (lbs.) 3,000 3,000
Weight (lbs.) 390 467
Size (L x D x H) 82-1/4” x 50-5/8” x 67-78” 80-1/4” x 50-5/8” x 64-1/8”
Nestable* Stacks 3 high Stacks 3 high
* Nestable when unassembled
23.25” x 25.25” trap door makes
organics disposal easy
Available steel or plastic
fork pockets
Wastequip is the leading North American manufacturer of waste and recycling equipment for collecting, processing and transporting recyclables and solid or liquid waste.
March 2011 © Wastequip, all rights reserved. Specifications subject to improvement without notice. Equipment displayed should be operated by properly trained personnel. Operators should become familiar with OSHA, ANSI and any other applicable
standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. We assume no liability or responsibility for proper training/operation of
equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. Information contained within this literature is intended to be the most accurate available at time of printing.
TOT015-062011