AM 02 C Stripper-Crimper for small size Z+F ferrules ... - Z+F USA, Inc.

AM 04 Stripper-Crimper for Z+F insulated ferrules
This electro-pneumatic Stripper-Crimper is designed for
rapid and reliable processing of loose piece Z+F insulated
ferrules. The AM 04 may be adapted by using the
corresponding tools for ferrules with cross-sections in the
range of
4mm²-10mm² (AWG 12-8)
and crimping lengths from
8mm-18mm (0.31“-0.71“)
Specification of the processing ferrules, as well as the
employed wires, are necessary to determine the tool
requirements.
Processable ferrules:
12 AWG 10 AWG 8 AWG
4.0/8K --- ---
4.0/10N --- ---
4.0/12HL 6.0/12N 10.0/12N
4.0/18L 6.0/18L 10.0/18L
Technical data:
Drive:
electro-pneumatic
Power supply:
120V/ 60Hz
Power consumption: 60VA
Operating pressure: 5 bar (72.5 psi)
Air consumption: 2 L (0.5 Gallon)
Cross-section range: 4mm²-10mm² (AWG 12-8)
Crimp length: 8mm-18mm (0.31“-0.71“)
Cycle time: 2.5s
Dimensions (wxdxh): 530x400x460mm
20.9“x15.7“x18.1“
Color:
blue (RAL5012)
Weight:
40kg (88lbs)
Order specifications:
AM 04- cross-section/crimping length/specification
Options(Based on specifications):
-Feeding bowl
-Feeding tube
-Singling Unit
-Ferrule holder
-Starting unit
-Wire centralizer
-Crimping tool
Optionally, the machine
can be equipped with a
quadrocrimp tool, which
creates a perfect 4-sided
quadratic crimp
Standard
Quadro
700 Old Pond Road, Suite 606, Bridgeville, PA 15017
Tel.: 412-257-8575 Fax: 412-257-8576
www.zf-usa.com info@zf-usa.com © 2011 Copyright Z+F USA, Inc.