Restorative Procedure - Kerr Hawe
Restorative Procedure - Kerr Hawe
Restorative Procedure - Kerr Hawe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OptiBond Solo Plus<br />
Application Guide<br />
Clinical Research<br />
Dentin Shear Bond Strength (MPa)<br />
of 5th-Generation Adhesives<br />
35<br />
30<br />
25<br />
31<br />
20<br />
15<br />
10<br />
5<br />
20 21 22<br />
Table missing<br />
23 23<br />
0<br />
Excite ® XP Bond Adper Prime ® & One Step ® OptiBond ®<br />
Single Bond Bond NT Plus Solo Plus <br />
Published by H. Lu*, H. Bui, X. Qian, D. Tobia, <strong>Kerr</strong> Corporation,<br />
IADR 2008, #401<br />
1. Etch enamel and dentine<br />
for 15 seconds.<br />
2. Rinse thoroughly<br />
for 15 seconds.<br />
3. Air dry for 3 seconds.<br />
Do not dessicate.<br />
4. Shake unidose before<br />
dispensing.<br />
5. Twist open the<br />
unidose.<br />
6. Dip brush. Apply<br />
OptiBond Solo Plus<br />
for 15 seconds using<br />
light brushing motion.<br />
7. Air thin for 3 seconds. 8. Light cure for 20<br />
seconds*. Surface is<br />
ready for composite<br />
placement.<br />
STRONG DURABLE BOND. SEM Image<br />
shows excellent penetration of OptiBond<br />
Solo Plus into demineralized dentin,<br />
forming long resin tags and a well-defined<br />
hybrid layer, which results in superior bond<br />
strength.<br />
* Recommended Cure Times: Demi 5 sec., L.E.Demetron II 5 sec., L.E.Demetron I, 10 sec. or Optilux 501 in Boost mode 10 sec.<br />
14<br />
Your practice is our inspiration.