New Light 2013 - ClimaCare

Series 882···
Application areas
Pedestrian zones, arcades, paths in parks and green
areas, residential facilities, stairs, access areas, light
around the house.
Mounting type
Installation of bollard luminaire in firm underground
via baseplate. Mounting in the substrate is via suitable
underground support (accessory).
···W··· Mounting of wall luminaire with cast aluminium
mounting plate.
Optical systems
With wide light intensity distribution.
···L··· With decorative upper light output.
Luminaire body
Luminaire head of aluminium and cast aluminium components,
metallic grey colour similar to RAL 9006, highly
weather resistant, powder-coated. Relamping after
removal of luminaire head, secured via stainless steel
screws with allen key. Cover of lamp compartment with
translucent, impact resistant borosilicate glass tube, with
TC-T-configuration of impact resistant PMMA. Supporting
column of extruded aluminium section, Round section.
Flange plate of cast aluminium. Supporting column and
baseplate Colour anthracite, similar to DB 703 with metal
effect, powder-coated, highly weather resistant.
Electrical version
Electric block with all electric components, can be
replaced. Electrical connection via 3-pole connection
terminal to 2 x 4mm². Ingress protection of connection
housing IP23.
···W··· Electrical connection to socket of plug connection
to 2 x 5 x 1.5 mm².
Mains No power supply equipment required,
lamp operation directly from mains power.
···K··· With inductive ballast, parallel-compensated.
···E··· With electronic ballast.
Supplementary equipment
···Ü··· Optionally with rear door and integral junction box
for fuse to 16 A.
Feeding for two cables, max. 5 x 6 mm². Degree of protection
IP54 for junction box.
25